Objective:To analyse the impact of diagnosis-related groups (DRG) payment reform on the length of stay and hospitalisation expenses of patients in pilot medical institutions of Beijing, for references for the formulation and optimisation of DRG payment related policies.Methods:The home page data of inpatient medical records from 56 medical institutions that implemented DRG payment in Beijing from April to October 2021 (before DRG payment reform) and April to October 2022 (after DRG payment reform). Patients participating in the basic medical insurance for urban employees in Beijing were selected as the reform group, and others served as the control group. The difference-in-differences model (DID) were used to analyse the related indicators, to evaluate the effectiveness of the reform.Results:This study comprised a total of 3 294 003 inpatients. Of them, 1 714 134 cases were in the control group (911 100 cases before the reform and 803 034 cases after) and 1 579 869 cases were in the study group (802 899 cases before the reform and 776 970 cases after). The gender, age composition and treatment methods of patients changed little before and after the reform. But the proportion of patients with severe comorbidities or complications rose from 11.11% before the reform to 13.19% after the reform. Through the analysis of the DID model, the DRG payment reform could reduce the length of stay ( P=0.001) and hospitalization expenses of patients ( P<0.001), and played a certain optimising role in the cost structure. Among them, the proportion of medical service expenses did not change significantly ( P=0.977), the proportion of inspection and testing expenses, as well as drug expenses decreased slightly ( P=0.001, P=0.004), and the proportion in consumable expenditures increased slightly ( P=0.001). Conclusions:DRG payment reform played a positive role in shortening the length of stay and hospitalization expenses. It was suggested that medical institutions in Beijing should further optimize the structure of patient hospitalization expenses, with a focus on exploring effective ways to increase the medical service revenue and reasonably control the consumables costs.

Objective:To analyse the impact of diagnosis-related groups (DRG) payment reform on the length of stay and hospitalisation expenses of patients in pilot medical institutions of Beijing, for references for the formulation and optimisation of DRG payment related policies.Methods:The home page data of inpatient medical records from 56 medical institutions that implemented DRG payment in Beijing from April to October 2021 (before DRG payment reform) and April to October 2022 (after DRG payment reform). Patients participating in the basic medical insurance for urban employees in Beijing were selected as the reform group, and others served as the control group. The difference-in-differences model (DID) were used to analyse the related indicators, to evaluate the effectiveness of the reform.Results:This study comprised a total of 3 294 003 inpatients. Of them, 1 714 134 cases were in the control group (911 100 cases before the reform and 803 034 cases after) and 1 579 869 cases were in the study group (802 899 cases before the reform and 776 970 cases after). The gender, age composition and treatment methods of patients changed little before and after the reform. But the proportion of patients with severe comorbidities or complications rose from 11.11% before the reform to 13.19% after the reform. Through the analysis of the DID model, the DRG payment reform could reduce the length of stay ( P=0.001) and hospitalization expenses of patients ( P<0.001), and played a certain optimising role in the cost structure. Among them, the proportion of medical service expenses did not change significantly ( P=0.977), the proportion of inspection and testing expenses, as well as drug expenses decreased slightly ( P=0.001, P=0.004), and the proportion in consumable expenditures increased slightly ( P=0.001). Conclusions:DRG payment reform played a positive role in shortening the length of stay and hospitalization expenses. It was suggested that medical institutions in Beijing should further optimize the structure of patient hospitalization expenses, with a focus on exploring effective ways to increase the medical service revenue and reasonably control the consumables costs.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Purpose: This study compared the efficacy of heat insulation between 5% dextrose and 0.9% saline in radiofrequency ablation (RFA). Accordingly, temperature variations and maximum temperatures were assessed at identical distances and heat field distributions. Methods: Cubes of porcine liver tissue, measuring 10 mm across, were selected to precisely align the ablation boundary with the tissue boundary. An 18-gauge electrode with a 7-mm tip was inserted into each cube (10 per group) in a stainless-steel cup containing 40 mL of 5% dextrose or 0.9% saline. Fixed ablation was performed for 3 minutes using continuous mode at 30 W, simulating the typical thermal environment during thyroid RFA. Real-time temperature measurements were recorded by sensors positioned 0, 1, 3, and 5 mm from the cube’s edge. A comparative analysis was conducted to assess the maximum temperature, temperature variation, and duration of temperatures exceeding 42℃. Results: In both groups, the temperature curve declined with increasing distance from the edge of the ablated tissue. However, 0.9% saline exhibited higher maximum temperatures at 1, 3, and 5 mm compared to 5% dextrose (1 mm: 44.55°C±5.25°C vs. 34.68°C±3.07°C; 3 mm: 39.64°C±2.53°C vs. 29.22°C±2.21°C; 5 mm: 38.86°C±2.14°C vs. 28.74°C±2.51°C; all P<0.001). Considering a nerve injury threshold of 42°C, the 0.9% saline also displayed a greater proportion of samples reaching this temperature and a longer duration of temperatures exceeding it (P<0.05). Conclusion The heat insulation efficacy of 5% dextrose at 1-5 mm exceeds that of 0.9% saline at identical distances and in a common thermal environment during thyroid RFA.

Humans ; Thyrotoxicosis/chemically induced* ; Amiodarone

Objective To study the effects of aneurysmal neck angle on stent displacement after endovascular repair of abdominal aortic aneurysm (AAA). Methods The CT images of 28 patients were selected to establish preoperative AAA model, postoperative AAA model and covered stent model respectively, and the models were divided into non-severe angulation group ( n = 14) and severe angulation group ( n = 14) according to the preoperative angle of tumor neck. The geometric shape of each model was measured, and the changes of AAA geometric parameters and postoperative stent displacements before and after surgery were analyzed. The displacement force of the model during the first follow-up was calculated by hemodynamic simulation. Results Significant differences were found in tumor length, maximum diameter, displacement force, tumor neck length and tumor volume between two groups of patients (P<0. 05), while there was no significant difference between COG (the center of gravity) displacement and proximal displacement (P> 0. 05). For the incidence of internal leakage, there were 2 cases in non-severe angulation group and 4 cases in severe angulation group (P>0. 05).Conclusions Severe neck angulation can lead to a significant increase in support displacement force and decrease in proximal anchorage zone, and thus increase the possibility of support displacement. It is suggested that doctors should strengthen postoperative follow-up for patients with severe neck angulation and be vigilant of the occurrence of long-term internal leakage in clinic.

Objective To study the biomechanical effect of jumping distance on dental implants with socket-shield technique (SST), so as to provide references for clinical standards of jump distance. Methods Based on clinical characteristics, four groups of three-dimensional (3D) SST implant system models with 0, 0. 5, 1 and 1. 5 mm jumping distance were established, and the corresponding material parameters were assigned. The peak stress and stress distributions on models were simulated under specific occlusal condition. Results When the jumpingdistance was non-zero, namely, the implant was not in contact with the retained root fragment, the stress of the implant and abutment increased with the increase of jumping distance, and the peak stress in root fragment and periodontal membrane decreased with the increase of jumping distance. When the jumping distance was zero, the peak stress of the implant, abutment, root fragment and periodontal membrane reached the maximum, far exceeding that of the other groups. Conclusions The jumping distance has a significant effect on the SST implant system. It is recommended to take a larger jumping distance in clinical practices. The edge of the root fragment should be rounded, and the size of the lower edge should not be too small.