This study systematically collated and textual researched realgar from aspects such as name,origin,and quality by consulting ancient herbal texts,classic medical books,and modern literature.The textual research shows that current herbal works all take"realgar"as the official name,with aliases including"Huangshi shi","Shihuang","Tianyang shi","Jiguan shi","Xunhuang","Chouhuang",and"Mingxiong",etc.Ancient herbal records indicate that Xunhuang,Chouhuang,and Shuiku Realgar are all Realgar,while Orpiment is its associated mineral.In ancient times,the main production areas of Realgar were in Gansu,with outputs also seen in Shandong and Hunan.Nowadays,it is mainly produced in Hunan,Guizhou,Hubei,Gansu,Yunnan,Sichuan and other regions.Ancient herbal works mentioned characteristics like"cockscomb color","non-stinky","solid","red and bright"in their quality evaluation,while modern herbal works mostly evaluate its quality by color and texture,such as"red color","large blocks","brittle texture","glossy".The traditional efficacy of Realgar is to dry dampness,kill insects,detoxify various poisons,treat sores and activate blood.Modern studies have shown it also has anti-tumor,antibacterial and antiviral effects.Processing methods in past dynasties included water grinding,vinegar processing,refining,etc.,and currently,water grinding and acid water grinding are commonly used.This paper observed the properties of Realgar,detected the content of As?S?,and analyzed the microscopic characteristics and far-infrared spectral characteristics of qualified batches of Realgar.It was finally found that the As?S? content of qualified batches of Realgar was all more than 90%;under the scanning electron microscope,it showed massive shape,uniform distribution,obvious particles,and no agglomeration;a small amount of associated mineral Orpiment crystals were observed under the polarizing microscope;the characteristic peaks of Realgar(343-344 cm?1,224-225 cm?1,372-374 cm?1,367-369 cm?1,359 cm?1,207-208 cm?1,193-194 cm?1,168-170 cm?1)and Orpiment(390 cm?1,380 cm?1,347 cm?1,311 cm?1,300 cm?1,201 cm?1,182 cm?1,158 cm?1 and 139 cm?1)were determined."Red color and glossy"can be used as property references,"Realgar is a sulfide mineral of the Realgar family,with the main chemical component As?S?,associated with Orpiment"can be used as origin references,and"Shimen in Hunan,Wanshan in Guizhou,Yunnan,Gansu,Sichuan"can be used as production area references,which are consistent with the results of herbal textual research.This study provides a basis for the identification and analysis of Realgar,with a view to better guiding clinical medication and resource utilization.

This study systematically collated and textual researched realgar from aspects such as name,origin,and quality by consulting ancient herbal texts,classic medical books,and modern literature.The textual research shows that current herbal works all take"realgar"as the official name,with aliases including"Huangshi shi","Shihuang","Tianyang shi","Jiguan shi","Xunhuang","Chouhuang",and"Mingxiong",etc.Ancient herbal records indicate that Xunhuang,Chouhuang,and Shuiku Realgar are all Realgar,while Orpiment is its associated mineral.In ancient times,the main production areas of Realgar were in Gansu,with outputs also seen in Shandong and Hunan.Nowadays,it is mainly produced in Hunan,Guizhou,Hubei,Gansu,Yunnan,Sichuan and other regions.Ancient herbal works mentioned characteristics like"cockscomb color","non-stinky","solid","red and bright"in their quality evaluation,while modern herbal works mostly evaluate its quality by color and texture,such as"red color","large blocks","brittle texture","glossy".The traditional efficacy of Realgar is to dry dampness,kill insects,detoxify various poisons,treat sores and activate blood.Modern studies have shown it also has anti-tumor,antibacterial and antiviral effects.Processing methods in past dynasties included water grinding,vinegar processing,refining,etc.,and currently,water grinding and acid water grinding are commonly used.This paper observed the properties of Realgar,detected the content of As?S?,and analyzed the microscopic characteristics and far-infrared spectral characteristics of qualified batches of Realgar.It was finally found that the As?S? content of qualified batches of Realgar was all more than 90%;under the scanning electron microscope,it showed massive shape,uniform distribution,obvious particles,and no agglomeration;a small amount of associated mineral Orpiment crystals were observed under the polarizing microscope;the characteristic peaks of Realgar(343-344 cm?1,224-225 cm?1,372-374 cm?1,367-369 cm?1,359 cm?1,207-208 cm?1,193-194 cm?1,168-170 cm?1)and Orpiment(390 cm?1,380 cm?1,347 cm?1,311 cm?1,300 cm?1,201 cm?1,182 cm?1,158 cm?1 and 139 cm?1)were determined."Red color and glossy"can be used as property references,"Realgar is a sulfide mineral of the Realgar family,with the main chemical component As?S?,associated with Orpiment"can be used as origin references,and"Shimen in Hunan,Wanshan in Guizhou,Yunnan,Gansu,Sichuan"can be used as production area references,which are consistent with the results of herbal textual research.This study provides a basis for the identification and analysis of Realgar,with a view to better guiding clinical medication and resource utilization.

Objective To observe the effect of X-ray-guided placement of intestinal obstruction tube for treating malignant bowel obstruction(MBO)caused by gynecological malignant tumors.Methods Data of 60 patients with intestinal MBO after surgical operations of malignant gynecological tumors,including 30 cases underwent X-ray-guided intestinal obstruction tube placement(group A)and 30 cases underwent traditional nasogastric tube placement(group B),all followed by continuous gastrointestinal decompression were retrospectively analyzed.The remission of MBO symptoms,time of exhaust and defecation,so as diet recovery after treatment were compared between groups.The mean drainage volume within 24 h,tube retention time and treatment-related complications were recorded,and the survival of patients within 1 year after treatment were followed up.Results All 60 patients were successfully catheterized.The time of exhaust and defecation,oral feeding and tube retention time after catheterization in group A were shorter than those in group B(all P＜0.05),while the mean drainage volume within 24 h in group A was larger than that in group B(P＜0.05).No significant difference of relief rate of intestinal obstruction symptoms was found between groups(P=0.472).Minor nasal bleeding occurred in 8 cases,and oropharyngeal discomfort occurred in 4 cases in group A,while each in 5 cases in group B,all relieved without special treatments.No significant difference of treatment-related complication was observed between groups(P=0.361).One year after treatments,28 cases were followed up and 2 cases were lost in both groups,and no significant difference of survival rate was detected between group A(7/28,25.00%)and group B(5/28,17.86%)(P=0.745).Conclusion X-ray-guided placement of intestinal obstruction tube was safe and effective for treating MBO caused by malignant gynecological tumor.

BACKGROUND:Poor incision healing and infection often occur in elderly patients with lateral malleolar fractures after traditional lateral plate fixation.With the application of engineering software in medicine,a new type of plate placed posterolateral can be designed to solve the above-described problems. OBJECTIVE:To design a new type of posterior lateral low-profile steel plate with the aid of medical bioengineering software,based on the 3D CT data of the distance between the top of the lateral ankle fracture line to the anterior starting point(ACD),the distance between the top of the fracture line to the tip of the lateral ankle(CTD),the distance between the top of the fracture line to the posterior edge of the fracture line(PCD)and the angle between the anterior and posterior lateral sides of the distal fibula(CA). METHODS:Thirty cases of unstable lateral malleolar fracture and normal ankle were taken for CT scanning and three-dimensional reconstruction.The ACD,CTD,and PCD values in patients with lateral malleolar fracture were measured by 3-matic software,and the characteristics of lateral malleolar fracture line were plotted and described.The mimics software was used to measure the value of CA in the normal ankle joint.Based on the data measured above,3-matic software and solidworks software were used to design the low-profile steel plate and the thickness of the steel plate and the direction of the nail path were constructed.In Geomagic Studio software,fine surface,automatic surface,and fitting surface were used to generate the prototype of the low-profile steel plate,and then 3D printing was performed.After making a posterolateral incision of the lateral malleolus,the peroneus longus and brevis tendons were removed,and the prototype of the 3D-printed steel plate was placed behind the fibula to test its size and fit to the bone surface. RESULTS AND CONCLUSION:(1)The mean of ACD was(2.97±0.03)cm,and the variation was 5.23.The mean of PCD was(3.17±0.11)cm,and the variation was 17.60.The mean of CTD was(4.52±0.07)cm,and the variation was 8.60.(2)The fracture line of the lateral malleolus was drawn with an inverted"V"shape.The mean of CA between anterior and posterior lateral surfaces of the distal fibula was(103.20±1.94)°.At the midpoint section of the upper and lower vertices of the anterior edge of the distal fibula,the angle of the anterior and posterior lateral sides(CA)of the distal fibula was(78.50±1.78)°.(3)By using 3-matic,Solidworks,and Geomagic Studio software,a new type of posterior lateral low-profile steel could be successfully designed.Three to four holes were reserved for the screw holes at the proximal end of the plate with screw directions from back to front,and three screw holes were reserved on the inner and outer sides at the far end.The direction of the inner three holes could be from back to front,and the outer three screw holes needed to be biased towards the inner side,with an angle of 9.72°-13.28°.(4)It is indicated that the variability of the ACD position on the anterior lateral fracture line of the lateral malleolus is relatively small,while the variability of the posterior lateral PCD position is relatively large.The angle between the anterolateral and posterolateral sides of the lateral ankle fracture block shows a decreasing trend,with a smaller variation in the proximal angle and a larger variation in the distal angle.Based on three-dimensional CT reconstruction data of the external ankle,with the help of computer bioengineering software and the use of reverse design concept,a new type of low-profile lateral malleolus steel plate with a good fit can be quickly and conveniently designed to provide a valuable reference for the design of internal fixation devices.

Chylothorax is one of the complications of surgery and lymphatic diseases. The incidence rate of chylothorax has been increasing in recent years. X-ray-guided interventional therapy is a new method for treating chylothorax, and its curative effect is no less than the traditional surgical treatment. Based on discussing the aetiology and diagnosis of chylothorax, this paper briefly summarizes the application progress of X-ray-guided interventional therapy for chylothorax to provide further reference and a basis for clinical practice.

Guided bone regeneration (GBR) uses resorbable and non-resorbable membranes as biological barriers. This study compared the differences in hard tissue stability between GBR using evidence-based digital titanium mesh and resorbable collagen membranes during implant placement. A total of 40 patients (65 implant sites) were enrolled and divided into two groups: resorbable membrane and digital titanium mesh groups. The alveolar bone was analyzed at two- and three-dimensional levels using cone-beam computed tomography and by reconstructing and superimposing the hard tissues at four time points: preoperatively, postoperatively, before second-stage surgery, and 1 year after loading. The use of digital titanium mesh showed less alveolar bone resorption in vertical and horizontal directions two-dimensionally before the second-stage surgery and 1 year after loading. Regarding volumetric stability, the percentage of resorption after 6 months of healing with resorbable membrane coverage reached 37.5%. However, it was only 23.4% with titanium mesh. Although postoperative bone volume was greater at all labial sites with resorbable membrane than with digital titanium mesh, after substantial bone resorption within 1 year of loading, the labial bone thickness at the upper part of implants was thinner with resorbable membrane than with digital titanium mesh. Furthermore, digital titanium meshes made according to ideal bone arch contour reduced soft tissue irritation, and the exposure rate was only 10%. Therefore, although both resorbable membrane and digital titanium mesh in GBR were able to successfully reconstruct the bone defect, digital titanium meshes were better at maintaining the hard tissue volume in the osteogenic space.
Bone Regeneration ; Bone Resorption ; Humans ; Osteogenesis ; Surgical Mesh ; Titanium

Objective: To study the miR-28-3p expression in triple negative breast cancer (TNBC) tissues and cell lines, and explore its effect on the malignant biological behaviors of MDA-MB-468 cells. Methods： ：Tumor tissues and matched para-cancerous tissues were collected from 83 TNBC patients, who underwent tumor resection and pathological confirmation in the Fourth Hospital of Hebei Medical University between Jan. 2013 and Jan. 2014. TNBC cell lines (MDA-MB-468, HCC-1937, MDA-MB-231, MDA-MB436, MDA-MB-453) and human normal breast epithelial cell line MCF10A were also used in this study. qPCR was used to detect the expression of miR-28-3p in above mentioned tissues and cell lines. The correlation between miR-28-3p expression and clinical parameters was analyzed.After transfection with miR-28-3p inhibitor, the proliferation, apoptosis, invasion and migration ability of MDA-MB468 cells were detected with CCK-8, Flow cytometry, Transwell and Wound-healing experiment, respectively. And Western blotting was used to examine the protein expression of bridging integrator-1 (BIN1) in MDA-MB-468 cells. Bioinformatics BIN1 tool waere used to predict the target gene of miR-28-3p. Luciferase reporter gene assay was performed to validate the regulatory effect of miR-28-3p on BIN1. Results: The expression of miR-28-3p in TNBC tissues and cell lines was higher than that in matched paracancerous tissues and MCF10Acells (all P<0.01), respectively.Among the total 83 TNBC tissues, 56 (67.47%) showed high miR-28-3p expression. High expressionofmiR-28-3pwascloselycorrelated with the Ki-67 expression, tumor size and TNM stage (all P<0.05 or P<0.01). Compared with miR-NC group, transfection of miR-28-3p inhibitor significantly decreased the proliferation, invasion and migration of MDA-MB-468 cells while increased the apoptosis rate (all P<0.05 or P<0.01). Luciferase reporter gene assay confirmed that BIN1 was a target gene of miR-28-3p, and miR-28-3p inhibitor could up-regulate BIN1 expression in MDA-MB-468 cells (P<0.05). Conclusion: miR-28-3p is highly expressed in TNBC tissues and cell lines. miR-28-3p inhibitor up-regulates the expression of BIN1 to inhibit the proliferation, invasion and migration ability while promote the apoptosis of MDA-MB-468 cells.

Guided bone regeneration (GBR) is an effective and simple method for bone augmentation, which is often used to reconstruct the alveolar ridge when the bone defect occurs in the implant area. Titanium mesh has expanded the indications of GBR technology due to its excellent mechanical properties and biocompatibility, so that the GBR technology can be used to repair alveolar ridges with larger bone defects, and can obtain excellent and stable bone augmentation results. Currently, GBR with titanium mesh has various clinical applications, including different clinical procedures. Bone graft materials, titanium mesh covering methods, and titanium mesh fixing methods are also optional. Moreover, the research of GBR with titanium mesh has led to multifarious progresses in digitalization and material modification. This article reviews the properties of titanium mesh and the difference of titanium mesh with other barrier membranes; the current clinical application of titanium mesh in bone augmentation; common complications and management and prevention methods in the application of titanium mesh; and research progress of titanium mesh in digitization and material modification. Hoping to provide a reference for further improvement of titanium mesh in clinical application and related research of titanium mesh.
Alveolar Ridge Augmentation ; Bone Regeneration ; Bone Transplantation ; Dental Implantation, Endosseous ; Surgical Mesh ; Titanium

Objective:To collect and evaluate the information of literature on perimenopausal syndrome.Methods:The computer retrieval method supplemented by manual inspection of literature.Results:590 relevant documents were retrieved and among which 129 were comprehensively studied.Conclusion:The quality of the literature should be improved though there was an annual quantitive increase of the literature on perimenopausal syndrome in TCM.Great efforts should be made in this aspect.

Objective To evaluate the therapeutic effect of combination of sandostatin and growth hormone (GH) in the treatment of severe acute pancreatitis (SAP ). Methods Sixty patients with SAP were divided randomly into 3 groups:(1)Sandostatin treatment(ST) group (n=15);(2)combination of sandostatin with GH treatment(CT) group (n=30) ;(3)control group (n=15). The changes in serum IL-1, IL-6,TNF-? and albumin levels after treatment, and the incidence of complications, the duration of hospital stay and cost were compared among the 3 groups. Results The complications, mortality, duration of hospital stay in the CT group were significantly shorter than those in ST group and control group (all P