Debates persist regarding the efficacy and safety of azvudine, particularly its real-world outcomes. This study involved patients aged ≥60 years who were admitted to 25 hospitals in mainland China with confirmed SARS-CoV-2 infection between December 1, 2022, and February 28, 2023. Efficacy outcomes were all-cause mortality during hospitalization, the proportion of patients discharged with recovery, time to nucleic acid-negative conversion (T _NANC), time to symptom improvement (T _SI), and time of hospital stay (T _HS). Safety was also assessed. Among the 5884 participants identified, 1999 received azvudine, and 1999 matched controls were included after exclusion and propensity score matching. Azvudine recipients exhibited lower all-cause mortality compared with controls in the overall population (13.3% vs. 17.1%, RR, 0.78; 95% CI, 0.67-0.90; P = 0.001) and in the severe subgroup (25.7% vs. 33.7%; RR, 0.76; 95% CI, 0.66-0.88; P < 0.001). A higher proportion of patients discharged with recovery, and a shorter T _NANC were associated with azvudine recipients, especially in the severe subgroup. The incidence of adverse events in azvudine recipients was comparable to that in the control group (2.3% vs. 1.7%, P = 0.170). In conclusion, azvudine showed efficacy and safety in older patients hospitalized with COVID-19 during the SARS-CoV-2 omicron wave in China.

Objective:To explore the feasibility and effectiveness of full free-breathing cardiac magnetic resonance (CMR) in clinical practice.Methods:The study prospectively included patients who underwent full free-breathing CMR and traditional breath-holding cine imaging between June 1 and June 30, 2024. An analysis and comparison were conducted on the image acquisition time, image quality, and left ventricular function parameters under two scanning methods, including left ventricular ejection fraction (LVEF), left ventricular cardiac output (LVCO),left ventricular end diastolic volume (LVEDV), left ventricular end diastolic volume index (LVEDVI), left ventricular end systolic volume (LVESV), left ventricular end systolic volume index (LVESVI), left ventricular stroke volume (LVSV), and left ventricular mass (LVM). In addition, the study conducted both quantitative and qualitative analyses of other sequences in full free-breathing CMR, including T 1 mapping, T 2 mapping, flow imaging, and late gadolinium enhancement (LGE). Group comparisons were performed using the Wilcoxon signed-rank test or paired t-test. Consistency assessments included Bland-Altman analysis, intraclass correlation coefficient ( ICC), and linear regression analysis. Results:Totally, 150 patients were recruited into the study. The average acquisition time of full free-breathing CMR was (22.1±3.1) min, with an average short axis cine sequence examination time of (2.7±0.4) min; The average acquisition time of short axis images in a breath-holding state was (4.9±1.4) min, which was significantly longer than the cine scan in the free-breathing state ( P0.001). The cine and LGE images quality scores obtained from full free-breathing CMR were 4 (4, 4) points and 5 (4, 5) points, respectively, while the cine image quality score obtained in a breath-holding state was 5 (4, 5) points. Compared with traditional breath-hold CMR, free-breathing CMR measurements showed slightly higher LVESV, and LVESVI, while LVEDV, LVEDVI, LVSV, LVCO, LVEF, and LVM were slightly lower, except for LVSV and LVCO, which showed no statistically significant difference, the differences in other cardiac function parameters were statistically significant ( P0.05). However, the two methods demonstrated good consistency( ICC0.947) and correlation (0.808 r0.993, P0.001). The Bland-Altman analysis showed that the bias for all cardiac function parameters was within 8.0%. The Native T 1 and T 2 values for free-breathing CMR were (1 277.5±57.0) ms and 40.1 (38.5, 41.4) ms, respectively, and the results of flow imaging and echocardiography were basically consistent. Conclusions:Free-breathing CMR is feasible and effective in clinical practice, showing a high level of consistency with left ventricular functional parameters obtained from traditional breath-hold scanning. It significantly shortens examination time and holds great clinical value for the promotion and widespread use of CMR.

Integrated metabolomic and lipidomic profiling,utilizing liquid chromatography coupled with high-resolution mass spectrometry(LC-HRMS),has emerged as a pivotal strategy for biomarker discovery.However,the inherent polarity disparity between metabolites and lipids complicates simultaneous analysis.To address this,a dual-stationary phase polarity-extended liquid chromatography(PELC)system was developed,which surpassed conventional one-dimensional LC(1D-LC)by enabling comprehensive coverage of both polar and non-polar compounds within a single injection.This system enhanced chromatographic resolution,peak capacity,and throughput while minimizing analytical variability.Extracellular vesicles(EVs),lipid bilayer-enclosed nanoparticles ubiquitously present in biofluids,had gained prominence as reservoirs of cancer biomarkers due to their cargo stability and pathophysiological relevance.Herein,the application of PELC-HRMS for concurrent metabolome-lipidome profiling in EVs was pioneered.A total of 193 metabolites were identified using this technique coupled with MS-DIAL software and Human Metabolome Database.Subsequently,this technique was employed to explore potential biomarkers for prostate cancer(PCa).Multivariate analysis identified 17 differentially abundant metabolites in PCa,implicating dysregulated pathways including purine metabolism,starch and sucrose metabolism,galactose metabolism,cysteine and methionine metabolism,and biosynthesis of unsaturated fatty acids.Notably,creatine(AUC=0.92)and DG 42:5(AUC=0.80)demonstrated robust diagnostic efficacy,attributable to their broad polarity ranges and EV-specific enrichment.This study established PELC as a high-fidelity platform for multi-omics integration in complex biospecimens,advancing mechanistic insights into metabolic rewiring and disease pathophysiology.

Objective Through in vitro experiments,biomechanical data of the transtibial pullout suture(TPS),tendon reconstruction(TR),and tendon reconstruction with suture augmentation(TRS)were collected,so as to evaluate the biomechanical effectiveness of tendon reconstruction for repairing medial meniscus posterior root tear(MMPRT).Methods Eighteen porcine knee joint models were divided into TPS,TR,and TRS groups.Sutures were used to fix the meniscal root in TPS group.Tendons were passed through an incision at the meniscal root in TR group.Tendons were passed through an incision at the meniscal root and secured at tendon-meniscus contact area with additional sutures in TRS group.The sutures and tendons were pulled out through tibial tunnels and fixed at the anteromedial tibia.All groups underwent failure load tests,and ultimate failure load,displacement at failure load,load at clinical failure,stiffness,and failure modes of the samples were recorded.Results The maximum failure load in TPS group was significantly higher than that in TR group(P＜0.05),but there was no significant difference between TPS group and TRS group(P＞0.05).The maximum failure load in TRS group was significantly higher than that in TR group(P＜0.05).The displacement under failure load in TR group and TRS group was significantly lower than that in TPS group(P＜0.05),but there was no significant difference between TR group and TRS group(P＞0.05).There were no significant differences in the load under clinical failure among the 3 groups(P＞0.05).The stiffness of TRS group was significantly greater than that of TPS group(P＜0.05),but no significant difference was observed between TR group and TPS group,as well as between TR group and TRS group(P＞0.05).All failures were caused by suture or tendon cutting through the meniscus.Conclusions The tendon reconstruction techniques is superior to the TPS in terms of failure displacement and stiffness,while the TRS further enhances the stability of the repair.

Objective Through in vitro experiments,biomechanical data of the transtibial pullout suture(TPS),tendon reconstruction(TR),and tendon reconstruction with suture augmentation(TRS)were collected,so as to evaluate the biomechanical effectiveness of tendon reconstruction for repairing medial meniscus posterior root tear(MMPRT).Methods Eighteen porcine knee joint models were divided into TPS,TR,and TRS groups.Sutures were used to fix the meniscal root in TPS group.Tendons were passed through an incision at the meniscal root in TR group.Tendons were passed through an incision at the meniscal root and secured at tendon-meniscus contact area with additional sutures in TRS group.The sutures and tendons were pulled out through tibial tunnels and fixed at the anteromedial tibia.All groups underwent failure load tests,and ultimate failure load,displacement at failure load,load at clinical failure,stiffness,and failure modes of the samples were recorded.Results The maximum failure load in TPS group was significantly higher than that in TR group(P＜0.05),but there was no significant difference between TPS group and TRS group(P＞0.05).The maximum failure load in TRS group was significantly higher than that in TR group(P＜0.05).The displacement under failure load in TR group and TRS group was significantly lower than that in TPS group(P＜0.05),but there was no significant difference between TR group and TRS group(P＞0.05).There were no significant differences in the load under clinical failure among the 3 groups(P＞0.05).The stiffness of TRS group was significantly greater than that of TPS group(P＜0.05),but no significant difference was observed between TR group and TPS group,as well as between TR group and TRS group(P＞0.05).All failures were caused by suture or tendon cutting through the meniscus.Conclusions The tendon reconstruction techniques is superior to the TPS in terms of failure displacement and stiffness,while the TRS further enhances the stability of the repair.

Objective:To explore the feasibility and effectiveness of full free-breathing cardiac magnetic resonance (CMR) in clinical practice.Methods:The study prospectively included patients who underwent full free-breathing CMR and traditional breath-holding cine imaging between June 1 and June 30, 2024. An analysis and comparison were conducted on the image acquisition time, image quality, and left ventricular function parameters under two scanning methods, including left ventricular ejection fraction (LVEF), left ventricular cardiac output (LVCO),left ventricular end diastolic volume (LVEDV), left ventricular end diastolic volume index (LVEDVI), left ventricular end systolic volume (LVESV), left ventricular end systolic volume index (LVESVI), left ventricular stroke volume (LVSV), and left ventricular mass (LVM). In addition, the study conducted both quantitative and qualitative analyses of other sequences in full free-breathing CMR, including T 1 mapping, T 2 mapping, flow imaging, and late gadolinium enhancement (LGE). Group comparisons were performed using the Wilcoxon signed-rank test or paired t-test. Consistency assessments included Bland-Altman analysis, intraclass correlation coefficient ( ICC), and linear regression analysis. Results:Totally, 150 patients were recruited into the study. The average acquisition time of full free-breathing CMR was (22.1±3.1) min, with an average short axis cine sequence examination time of (2.7±0.4) min; The average acquisition time of short axis images in a breath-holding state was (4.9±1.4) min, which was significantly longer than the cine scan in the free-breathing state ( P0.001). The cine and LGE images quality scores obtained from full free-breathing CMR were 4 (4, 4) points and 5 (4, 5) points, respectively, while the cine image quality score obtained in a breath-holding state was 5 (4, 5) points. Compared with traditional breath-hold CMR, free-breathing CMR measurements showed slightly higher LVESV, and LVESVI, while LVEDV, LVEDVI, LVSV, LVCO, LVEF, and LVM were slightly lower, except for LVSV and LVCO, which showed no statistically significant difference, the differences in other cardiac function parameters were statistically significant ( P0.05). However, the two methods demonstrated good consistency( ICC0.947) and correlation (0.808 r0.993, P0.001). The Bland-Altman analysis showed that the bias for all cardiac function parameters was within 8.0%. The Native T 1 and T 2 values for free-breathing CMR were (1 277.5±57.0) ms and 40.1 (38.5, 41.4) ms, respectively, and the results of flow imaging and echocardiography were basically consistent. Conclusions:Free-breathing CMR is feasible and effective in clinical practice, showing a high level of consistency with left ventricular functional parameters obtained from traditional breath-hold scanning. It significantly shortens examination time and holds great clinical value for the promotion and widespread use of CMR.

Aim To investigate the intracellular up-take and target protein binding characteristics of two Bruton's tyrosine kinase inhibitors(BTKi)with differ-ent selectivities to provide further insights into the mechanisms of drug off-target-related bleeding risk.Methods Ibrutinib(non-selective BTKi)and za-nubrutinib(selective BTKi)were used as study drugs.After incubation of MEC-1 cells and human platelets with drugs,the cellular thermal shift assay(CETSA)was combined with Western blot to obtain the melting curve and isothermal curve to analyze the binding char-acteristics of the two drugs with the target protein BTK.After incubation of MEC-1 cells and human platelets with drugs,the concentrations of the two drugs were detected by liquid chromatography-tandem mass spectrometry(LC-MS/MS)to analyze the intracellular uptake of the two drugs.Results CETSA analysis confirmed that zanubrutinib was more selective for the target protein BTK compared to ibrutinib.LC-MS/MS analysis showed that both drugs were uptaken intracel-lularly by MEC-1 cells and platelets in a concentration-dependent manner.Conclusions While BTKi targe-ting BTK to B lymphocytes exerts therapeutic effects,off-target effects on platelets due to differences in their intracellular uptake,and target-binding characteristics may be one of the reasons for the differences in bleed-ing risk across selective BTKi.

Objective:To investigate whether glycated haemoglobin A1c (HbA1c) can be used as a predictor of mortality risk in patients with influenza pneumonia.Methods:This study was a single-center retrospective study, and enrolled patients with influenza pneumonia in the Emergency Department and in-patient departments of Beijing Chaoyang Hospital, Capital Medical University from 2017 to 2019. Gender, age, underlying diseases, influenza virus nucleic acid or antigen results, chest X-ray or chest CT reports, routine blood test, biochemical indicators, HbA1c and procalcitonin (PCT) were collected, and all subjects were divided into survival and death groups based on 28-day mortality. The differences between the two groups were compared and Cox regression was used to analyze risk factors for 28-day mortality.Results:In this study, 122 patients with influenza pneumonia were included, and 94 (77.0%) cases were divided into the survival group and 28 (23.0%) cases into the death group. Univariate analysis showed that lymphocyte counts [0.49 (0.33, 0.73) vs. 0.77 (0.49, 1.23) ×10 9/L, Z= -3.008, P=0.003] were lower and HbA1c levels [6.5 (6.1, 7.1) vs. 6.1 (5.7, 6.8) %, Z= 2.203, P= 0.028] and PCT levels [0.64 (0.20, 6.43) vs. 0.16 (0.05, 0.87) μg/L, Z=2.594, P=0.009] were higher in dead patients compared with those in the survivors. Cox multivariate regression and survival analysis found that after adjusting for age, lymphocyte counts ( HR=0.260, 95% CI: 0.087-0.773, P=0.015) and HbA1c levels ( HR=1.295, 95% CI:1.007-1.666, P=0.044) were independent risk factors for 28-day mortality. Conclusions:HbA1c is an independent risk factor for predicting 28-day mortality in patients with influenza pneumonia.

Purpose::Under-foot impact loadings can cause serious lower limb injuries in many activities, such as automobile collisions and underbody explosions to military vehicles. The present study aims to compare the biomechanical responses of the mainstream vehicle occupant dummies with the human body lower limb model and analyze their robustness and applicability for assessing lower limb injury risk in underfoot impact loading environments.Methods::The Hybrid III model, the test device for human occupant restraint (THOR) model, and a hybrid human body model with the human active lower limb model were adopted for under-foot impact analysis regarding different impact velocities and initial lower limb postures.Results::The results show that the 2 dummy models have larger peak tibial axial force and higher sensitivity to the impact velocities and initial postures than the human lower limb model. In particular, the Hybrid III dummy model presented extremely larger peak tibial axial forces than the human lower limb model. In the case of minimal difference in tibial axial force, Hybrid III's tibial axial force (7.5 KN) is still 312.5% that of human active lower limb's (2.4 KN). Even with closer peak tibial axial force values, the biomechanical response curve shapes of the THOR model show significant differences from the human lower limb model.Conclusion::Based on the present results, the Hybrid III dummy cannot be used to evaluate the lower limb injury risk in under-foot loading environments. In contrast, potential improvement in ankle biofidelity and related soft tissues of the THOR dummy can be implemented in the future for better applicability.

Objective:To analyze the epidemic characteristics of reported tuberculosis incidence in Kashgar from 2015 to 2022, and use the seasonal autoregressive integrated moving average (SARIMA) model to predict the incidence, providing references for the local control of pulmonary tuberculosis.Methods:The reported incidence data of tuberculosis in the Kashgar area of Xinjiang from January 2015 to August 2023 were collected through the"Infectious Disease Monitoring System", a subsystem of the "Chinese Disease Prevention and Control Information System". The epidemic characteristics of reported incidence in this area from 2015 to 2022 were analyzed. Two SARIMA models of monthly reported incidence number and rate were established. The prediction performance of the two models was evaluated using the reported incidence data of tuberculosis from January 2023 to August 2023. The χ2 test was used to analyze population characteristics, and the Cochran-Armitage trend test was used to analyze annual incidence. Results:From 2015 to 2022, 133 972 cases of pulmonary tuberculosis were reported in Kashgar, with a yearly reported incidence rate of 383.64/100 000, showing a rising trend ( TCA=77.03, P<0.001) and then a declining trend ( TCA=176.16, P<0.001). The proportion of pathogenic positive pulmonary tuberculosis had increased yearly ( TCA=132.66, P<0.001). The reported onset time was concentrated from January to June each year, with a peak in April. Yengisar County, Zepu County and Yopurga County had the highest reported incidence rate in Kashgar. The sex ratio of men to women was 1.03∶1, and the reported incidence rate of men was higher than that of women ( χ2=27.04, P<0.001). The reported incidence rate of the group aged 60 years and older was the highest. The patient′s occupation was mainly farmers (84.99%). The average relative errors of the SARIMA ( 1, 1, 2) ( 0, 1, 1) 12 model and SARIMA ( 0, 1, 1)( 0, 1, 1) 12 model in predicting the reported monthly incidence number and rate were 11.67% and -9.81%, respectively. Both models had good prediction accuracy (MAPE=33.55%, MAPE=38.22%). Conclusion:The average reported incidence rate of pulmonary tuberculosis in the Kashgar area shows a rising trend first and then a declining trend. The patients are mainly men and farmers, and attention should be paid to the prevention and control of tuberculosis among the elderly in winter and spring. The SARIMA ( 1, 1, 2) ( 0, 1, 1) 12 model and SARIMA ( 0, 1, 1)( 0, 1, 1) 12 model can fit the trend of reported tuberculosis incidence in the Kashgar area well and have good predictive performance.