Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

Arthroscopic surgery currently faces challenges such as limited intraoperative visibility and high technical demands, resulting in a particularly steep learning curve. However, traditional teaching methods at present also present problems including significant operational risks, high learning costs, and ethical dilemmas associated. This has created an urgent need among surgeons for a more efficient and economical training approach. Recent advancements in virtual reality technology have created high-fidelity virtual environments which allow surgeon users to undergo immersive surgical training within simulated settings, offering novel perspectives for standardised arthroscopic skills training. This review systematically summarises the current application progress, technical challenges, and potential future directions of virtual reality arthroscopy simulators, focusing on their technical architecture, characteristics, and advantages. We aim to provide a theoretical basis for the technical standardisation and clinical translation of virtual reality technology in the field of arthroscopic surgical training.

As antibiotic resistance becomes increasingly concerning,antimicrobial peptides,as a new type of antibiotic alternative,have attracted more attention.However,the low enzymatic stability of antimicrobial peptides severely limits their clinical applications.To address this issue,researchers have developed various structural modification strategies,including the introduction of unnatural amino acids,peptide chain cyclization and chemical group modification.This article reviews the basic principles and cases of the above modification strategies analyzes the advantages and disadvantages of different modification strategies and recommends ways these strategies can be optimized.In addition,this article predicts the developments of and potential challenges to strategies for enhancing enzymatic stability of antimicrobial peptides in the hope of providing references for subsequent research and development of antimicrobial peptides.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To analyze the clinical manifestations and fundus multimodal imaging features of patients with acute Vogt-Koyanagi-Harada (VKH) syndrome, and provide a reference for early diagnosis of VKH syndrome.Methods:Retrospective analysis was performed on the clinical data and related examinations including spectral-domain optical coherence tomography (SD-OCT), fundus fluorescein angiography (FFA), and indocyanine green angiography (ICGA) of patients diagnosed with acute VKH syndrome in the Ophthalmology Department of the Beijing Friendship Hospital from January 2017 to December 2022.Results:A total of 17 patients (34 eyes) with acute VKH syndrome were included. SD-OCT showed exudative retinal detachment in all 34 eyes with punctate hyperreflective signals; 26 eyes had choroidal folds, and 14 patients (28 eyes) had " septum-like" structures under the neuroepithelium. FFA early images showed late retinal fluorescence pooling in a multi-lake pattern in all 34 eyes. ICGA was performed in 15 patients (30 eyes), with early images showing hyperfluorescence of choroidal vessels in all 30 eyes; 26 eyes had scattered hypofluorescent lesions in the fundus. Mid-to-late images showed blurred boundaries of choroidal vessels in 28 eyes.Conclusions:Patients with acute VKH syndrome have characteristic manifestations in SD-OCT, FFA, and ICGA. Fundus multimodal imaging can provide important references for the diagnosis of VKH syndrome.

Objective:To analyze the clinical manifestations and fundus multimodal imaging features of patients with acute Vogt-Koyanagi-Harada (VKH) syndrome, and provide a reference for early diagnosis of VKH syndrome.Methods:Retrospective analysis was performed on the clinical data and related examinations including spectral-domain optical coherence tomography (SD-OCT), fundus fluorescein angiography (FFA), and indocyanine green angiography (ICGA) of patients diagnosed with acute VKH syndrome in the Ophthalmology Department of the Beijing Friendship Hospital from January 2017 to December 2022.Results:A total of 17 patients (34 eyes) with acute VKH syndrome were included. SD-OCT showed exudative retinal detachment in all 34 eyes with punctate hyperreflective signals; 26 eyes had choroidal folds, and 14 patients (28 eyes) had " septum-like" structures under the neuroepithelium. FFA early images showed late retinal fluorescence pooling in a multi-lake pattern in all 34 eyes. ICGA was performed in 15 patients (30 eyes), with early images showing hyperfluorescence of choroidal vessels in all 30 eyes; 26 eyes had scattered hypofluorescent lesions in the fundus. Mid-to-late images showed blurred boundaries of choroidal vessels in 28 eyes.Conclusions:Patients with acute VKH syndrome have characteristic manifestations in SD-OCT, FFA, and ICGA. Fundus multimodal imaging can provide important references for the diagnosis of VKH syndrome.

As antibiotic resistance becomes increasingly concerning,antimicrobial peptides,as a new type of antibiotic alternative,have attracted more attention.However,the low enzymatic stability of antimicrobial peptides severely limits their clinical applications.To address this issue,researchers have developed various structural modification strategies,including the introduction of unnatural amino acids,peptide chain cyclization and chemical group modification.This article reviews the basic principles and cases of the above modification strategies analyzes the advantages and disadvantages of different modification strategies and recommends ways these strategies can be optimized.In addition,this article predicts the developments of and potential challenges to strategies for enhancing enzymatic stability of antimicrobial peptides in the hope of providing references for subsequent research and development of antimicrobial peptides.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

Arthroscopic surgery currently faces challenges such as limited intraoperative visibility and high technical demands, resulting in a particularly steep learning curve. However, traditional teaching methods at present also present problems including significant operational risks, high learning costs, and ethical dilemmas associated. This has created an urgent need among surgeons for a more efficient and economical training approach. Recent advancements in virtual reality technology have created high-fidelity virtual environments which allow surgeon users to undergo immersive surgical training within simulated settings, offering novel perspectives for standardised arthroscopic skills training. This review systematically summarises the current application progress, technical challenges, and potential future directions of virtual reality arthroscopy simulators, focusing on their technical architecture, characteristics, and advantages. We aim to provide a theoretical basis for the technical standardisation and clinical translation of virtual reality technology in the field of arthroscopic surgical training.