Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

As antibiotic resistance becomes increasingly concerning,antimicrobial peptides,as a new type of antibiotic alternative,have attracted more attention.However,the low enzymatic stability of antimicrobial peptides severely limits their clinical applications.To address this issue,researchers have developed various structural modification strategies,including the introduction of unnatural amino acids,peptide chain cyclization and chemical group modification.This article reviews the basic principles and cases of the above modification strategies analyzes the advantages and disadvantages of different modification strategies and recommends ways these strategies can be optimized.In addition,this article predicts the developments of and potential challenges to strategies for enhancing enzymatic stability of antimicrobial peptides in the hope of providing references for subsequent research and development of antimicrobial peptides.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

As antibiotic resistance becomes increasingly concerning,antimicrobial peptides,as a new type of antibiotic alternative,have attracted more attention.However,the low enzymatic stability of antimicrobial peptides severely limits their clinical applications.To address this issue,researchers have developed various structural modification strategies,including the introduction of unnatural amino acids,peptide chain cyclization and chemical group modification.This article reviews the basic principles and cases of the above modification strategies analyzes the advantages and disadvantages of different modification strategies and recommends ways these strategies can be optimized.In addition,this article predicts the developments of and potential challenges to strategies for enhancing enzymatic stability of antimicrobial peptides in the hope of providing references for subsequent research and development of antimicrobial peptides.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

Objective:To identify the risk factors affecting the healing of defective bony nonunion.Methods:The studies reporting the risk factors for healing of defective bony nonunion between January 2000 and March 2022 were retrieved by computer from the VIP, Wanfangdata, CNKI, Web of Science, PubMed, and Medline databases. The Newcastle-Ottawa Scale (NOS) was used to evaluate the quality of the included studies. the RevMan 5.3 software was used to perform a meta-analysis of the general factors, injuries and surgical-related factors affecting the healing of defective bony nonunion.Results:Included in this Meta analysis were 17 studies with 1,236 patients. The NOS score of the included studies was from 5 to 8. The meta-analysis showed the following: age ( MD=-4.27, 95% CI: -8.29 to 2.91, P < 0.01), smoking ( OR=3.56, 95% CI: 2.81 to 6.32, P < 0.01), soft tissue defect ( OR=3.54, 95% CI: 2.21 to 5.69, P < 0.01), combined ipsilateral fibular fracture ( OR=4.18, 95% CI: 1.24 to 14.03, P=0.02), venous thrombosis ( OR=4.27, 95% CI: 1.05 to 17.44, P=0.04), and postoperative infection ( OR=2.96, 95% CI: 1.97 to 4.47, P < 0.01) were significant risk factors for the healing of defective bone nonunion. Minor bone defect ( SMD=-0.67, 95% CI: -1.25 to -0.10, P=0.02), proximal to distal bone transport ( OR=-0.42, 95% CI: 0.22 to 0.77, P < 0.01), short-term external fixation ( MD=-3.92, 95% CI: -7.10 to -0.73, P=0.02), and autologous bone grafting ( OR=0.39, 95% CI: 0.16 to 0.95, P=0.04) were protective factors for the healing of defective bony nonunion. Conclusions:High age (senility), smoking, soft tissue defect, ipsilateral fibular fracture, venous thrombosis, and postoperative infection are risk factors affecting the healing of defective bony nonunion. Minor bone defect, proximal to distal bone transport, short-term external fixation, and autologous bone grafting are protective factors affecting the healing of defective bony nonunion. Surgeons can predict early the prognosis of patients with defective bony nonunion based on the above factors.

Objective:To analyze the clinical application of different diagnostic methods for heart failure with preserved ejection fraction (HFpEF) in maintenance hemodialysis (MHD) patients.Methods:It was a single-center retrospective cohort study. Uremia patients who underwent hemodialysis at Ruijin Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from July 2020 to June 2021 were enrolled. The demographic characteristics, laboratory indicators, and echocardiography parameters were collected. The 2016 European Society of Cardiology (ESC) criteria, H 2FPEF score [composite score based on weighted scores of heavy (H), hypertensive (H), atrial fibrillation (F), pulmonary hypertension (P), elder (E), and filling pressure (F)], and Heart Failure Association (HFA) -PEFF score [including pre-test assessment (P), echocardiography and natriuretic peptide score (E), functional testing (F) and final aetiology (F)] were used to diagnose HFpEF, respectively, and the difference of three diagnostic methods was compared. The association between HFpEF diagnosed by the three methods and poor outcomes (all-cause death, cardiovascular death) was analyzed. Results:A total of 160 MHD patients were included, whose age was (58.5±13.4) years, median dialysis age was 5.0 (2.3, 9.6) years, median H 2FPEF score was 2 (1, 3), median HFA-PEFF score was 4 (3, 5), and 92 (57.5%) were males. Of these patients, 118 patients (73.8%) met the 2016 ESC criteria for diagnosis of HFpEF, 4 (2.5%) met H 2FPEF score for diagnosis of HFpEF, and 56 (35.0%) met HFA-PEFF score for diagnosis of HFpEF. The consistency of three methods in diagnosing HFpEF was poor with κ values of 0.018 between ESC criteria and H 2FPEF score, 0.322 between ESC criteria and HFA-PEFF score, and 0.056 between H 2FPEF score and HFA-PEFF score. After a median follow-up of 2.6 years, 20 (12.5%) of the 160 MHD patients died. The Kaplan-Meier survival analysis showed a significant difference in mortality between patients diagnosed with HFpEF and those without using the H 2FPEF score (Log-rank test, χ2=6.95, P=0.008). After adjusting for demographic and clinical parameters, multivariate Cox regression analysis showed that HFpEF diagnosed by HFA-PEFF score was associated with all-cause mortality ( HR=2.73, 95% CI 1.07-6.98, P=0.036) and cardiovascular mortality ( HR=4.77, 95% CI 1.31-17.30, P=0.018). Conclusions:The 2016 ESC criteria, H 2FPEF score, and HFA-PEFF score have high heterogeneity and poor consistency in diagnosing HFpEF in MHD patients. Among the three diagnostic methods, only the diagnosis based on HFA-PEFF score is associated with the prognosis of MHD patients. The HFA-PEFF score can be used to assess the risk of HFpEF in MHD patients, and more clinical studies are needed to further verify it in the future.

Objective To observe the temporary loss(re-falling)of knee range of motion(ROM)during rehabilitation after arthroly-sis for post-traumatic knee stiffness,and analyze the factors related to it. Methods From July,2016 to September,2019,64 patients(68 knees)in Beijing Bo'ai Hospital accepted minimally inva-sive arthrolysis for post-traumatic knee stiffness,and were followed up for twelve months.ROM of flexion and extension of knee was measured before operation,and one,six and twelve weeks,and six and twelve months af-ter operation;while they were asssessed with Hospital for Special Surgery Knee Score(HSS).Multivariate Logis-tic regression was performed on re-falling. Results The ROM and HSS score improved as a whole after operation;however,HSS score improved constantly,but ROM decreased six weeks after operation compared with that one weeks after operation,involving 46 knees of 44 cases.Arthrolysis longer than 12 months from primary injuries,multiple complicated fracture and history of infection were the risk factors for re-falling(OR＞8.058,P＜0.05). Conclusion Minimally invasive arthrolysis is effective on knee function after arthrolysis for post-traumatic knee stiff-ness.However,re-falling of ROM may happen during rehabilitation.Delay of operation,multiple complicated fracture and history of infection may increase the risk of re-falling.

Disinfection by-products (DBPs) are compounds generated by chemical reactions between disinfectants and chemical substances in the water during the process of drinking water treatment. More than 700 kinds of DBPs have been identified, the most abundant components are trihalomethanes and haloacetic acids. The safety of DBPs has attracted widespread attention. At present, studies have confirmed that DBPs have cytotoxicity, genotoxicity, carcinogenicity and developmental toxicity. In recent years, the damage of DBPs to reproductive function has been an increasing concern. This article reviewed the research progress on the effects of DBPs exposure on adult reproductive function based on toxicological and epidemiological studies, and discussed the future research direction.