Objective To compare the clinical outcomes of using elastic intramedullary nail and plate to fix fibular frac-ture.Methods The 60 patients with tibiofibular fractures admitted from January 2015 to December 2022 were divided into two groups:intramedullary nail group and plate group,30 cases each,intramedullary nail group was treated with elastic in-tramedullary nail fixation group,plate group was treated with steel plate and screw fixation group.Intramedullary nail group,there were 18 males and 12 females,aged from 22 to 75 years old with an average of(39.4±9.8)years old,including 24 cases of traffic accidents injury,6 cases of falling injury,23 cases of closed fractures,7 cases of open fractures.Steel plate group,there were 15 males and 15 females,aged from 24 to 78 years old with an average of(38.6±10.2)years old.The 22 cases were injured by traffic accident,8 cases were injured by falling.The 24 cases were closed fractures and 6 cases were open fractures.The operation time,intraoperative bleeding,American Orthopedic Foot and Ankle Society(AOFAS)ankle and hind foot scores,clinical healing time of fibula and the incidence of wound complications were compared between the two groups.Re-sults The patients in both groups were followed up for 6 to 21 months,with an average of(14.0±2.8)months.Compared with plate group,intramedullary nail group had shorter operative time,less bleeding,shorter clinical healing time of fibula,and low-er infection rate of incision,and the difference was statistically significant(P＜0.05).There were 2 cases of delayed healing in intramedullary nail group,1 case of nonunion in plate group,and 2 cases of delayed healing in plate group,and there was no statistically significant difference between the two groups(P＞0.05).In the last follow-up,according to the AOFAS scoring standard,the ankle function in intramedullary nail group was excellent in 17 cases,good in 12 cases,fair in 1 case,with an av-erage of(88.33±4.57)points,while in plate group,excellent in 16 cases,good in 10 cases,fair in 4 cases,with an average of(87.00±4.14)points;There was no statistical difference between the two groups(P＞0.05).Conclusion Elastic intramedullary nail has the advantages of short operation time,less intraoperative bleeding,short fracture healing time and less incision com-plications in the treatment of fibular fracture,which is worthy of clinical application.

Objective:To investigate the clinical features,gene mutation profile,efficacy and prognostic factors of primary extranodal diffuse large B-cell lymphoma(EN-DLBCL).Methods:A retrospective analysis was performed for 382 patients with primary EN-DLBCL with complete clinical data who were treated in West China Hospital from January 2013 to January 2023,and their clinical characteristics,gene mutation profile,efficacy and prognostic factors were analyzed.Results:The median age of the 382 patients with EN-DLBCL was 56 (18-89 )years old.The male-to-female ratio was 1.12∶1,and the most common primary sites were gastrointestinal tract (31.7％),Wechsler ring (19. 1％)and breast gland (7.1％).A total of 51 gene mutations were fund,and the most common frequencies of gene mutations were TP53 (32.5％),MYD88 (32.5％),and CD79B (30.0％).The median follow-up was 63 months,and the 5-year progression-free survival (PFS)rate was 74.5％ and the 5-year overall survival (OS)rate was 89.6％. The adverse factors on PFS were as follows:>1 extranodal sites involvement (P<0.001),P53≥50％(P<0.001),hyper double expression(hDEL)of C-myc>50％/Bcl-2>70％(P<0.001).The adverse factors affecting the OS of patients were as follows:>1 extranodal sites involvement (P<0.001),P53≥50％(P<0.001),hDEL(P<0.001). Chemotherapy combined with local radiotherapy could improve PFS (P=0.041)and OS (P=0.003),while R-CHOP+X (molecule agents as BTKi、HDACi、Lenalidomide)failed to show a significant difference in PFS (P=0.075)and OS (P=0.767 ).Among the 40 patients who underwent next-generation sequencing at high risk,there was no significant in PFS (P=0.849)and OS (P=0.500)of patients with positive MYD88 and/or CD79B mutations (MCD subtype)treated with BTKi and patients with negative MYD88 and CD79B mutations.Conclusion:Primary EN-DLBCL can involve multiple organs or tissue sites.TP53,MYD88,and CD79B are the most common gene mutations.The efficacy of BTKi in patients with positive MCD subtypes at intermediate and high risk is not inferior to that in MCD-negative control patients.

Objective:To analyze the key points and shortcomings of Traditional Chinese Medicine(TCM)science and technology innovation policy in China,and to provide reference for the subsequent policy optimization.Methods:Searching for TCM science and technology innovation policy texts released at the national level since 2007,and use the two-dimensional analysis framework for quantitative analysis.Results:Among 27 policies,In the X dimension,supply-based,environmental and demand-based policy tools respectively accounted for 48.98%,39.29%and 11.73%.In the Y dimension,the proportion of scientific and technological innovation and achievement transformation was the highest(29.03%);Promoting the development of integrated Chinese and Western medicine was the least used(1.08%).Conclusion:There is a structural imbalance in the application of policy tools,the distribution difference of policy objectives is significant,and the internal policy tools'usage is imbalanced regarding policy objectives.Suggestions:Optimize the internal structure of policy tools.Meanwhile,enhance the structure of policy objectives,and facilitate the dynamic integration and application of policy tools to achieve the policy objectives of scientific and technological innovation in TCM.

Plant natural products have a wide range of pharmacological properties, not only can they be used as plant dietary supplements to meet the nutritional needs of the human body in the accelerated pace of life, but also occupy an important position in the research and development of therapeutic drugs for the treatment of tumors, inflammation and other diseases, and have been widely accepted by the public due to their good safety. However, despite the above advantages of plant natural products, limiting factors such as low solubility, poor stability, lack of targeting, high toxicity and side effects, and unacceptable odor have greatly impeded their conversion to clinical applications. Therefore, the development of new avenues for the application of new natural products has become an urgent problem to be solved at present. In recent years, with the continuous development of research, various strategies have been developed to improve the bioavailability of natural products. Among them, nanocarrier delivery system is one of the most attractive strategies at present. In past studies, a large number of nanomaterials (organic, inorganic, etc.) have been developed to encapsulate plant-derived natural products for their efficient delivery to specific organs and cells. Up to now, nanotechnology has not only been limited to pharmaceutical applications, but is also competing in the fields of nanofood processing technology and nanoemulsions. Among the various nanocarriers, liposomes are the largest nanocarriers with the largest market share at present. Liposomes are bilayer nanovesicles synthesized from amphiphilic substances, which have advantages such as high drug loading capacity and stability. Attractively, the flexible surface of liposomes can be modified with various functional elements. Functionalized modification of liposomes with different functional elements such as antibodies, nucleic acids, peptides, and stimuli-responsive moieties can bring out the excellent drug delivery function of liposomes to a greater extent. For example, the modification of functional elements with targeting function such as nucleic acids and antibodies on the surface of liposomes can deliver natural products to the target location and improve the bioavailability of drugs; the modification of stimulus-responsive groups such as photosensitizers, magnetic nanoparticles, pH-responsive groups, and temperature sensitizers on the surface of liposomes can achieve controlled release of drugs, localized targeting, and synergistic thermotherapy. In addition to the above properties, by using functionalized liposomes to encapsulate natural products with irritating properties can also effectively mask the irritating properties of natural products, improve public acceptance, and increase the possibility of application of irritating natural products. There are various strategies for modifying liposomes with functional elements, and the properties of functionalized liposomes constructed by different construction strategies differ. The commonly used construction strategies for functionalized liposomes include covalent modification and non-covalent modification. These two types of construction strategies have their own advantages and disadvantages. Covalent modification has better stability than non-covalent modification, but its operation is cumbersome. With the above background, this review focuses on the three typical problems faced by plant natural products at present, and summarizes the specific applications of functionalized liposomes in them. In addition, this paper summarizes the construction strategies for building different types of functionalized liposomes. Finally, this paper will also review the opportunities and challenges faced by functionalized liposomes to enter clinical therapy, and explore the opportunities to overcome these problems, with a view to better realizing the precise control of plant nanomedicines, and providing ideas and inspirations for researchers in related fields as well as relevant industrial staff.

Objective:To investigate the accuracy of magnetic resonance imaging (MRI) cine sequences in determining the range of tumor motion in radiotherapy, providing a basis for the precise delineation of the target volume in motion for radiation therapy.Methods:A modified chest motion phantom was placed in a MRI scanner, and a water-filled sphere was used to simulate a tumor. True fast imaging with steady precession (TrueFISP) MRI cine sequences from Siemens were used to capture the two-dimensional motion images of the simulated tumor. The phantom experiments were divided into three modes: head-foot motion mode, rotation motion mode, and actual respiratory waveform mode. In the head-foot motion mode, respiratory motion period (3, 4, 5, 6, 7 and 8 s), amplitude (5, 10 and 15 mm), and respiratory waveform of the simulated tumor (sin and cos4) were set, resulting in a total of 36 motion combinations. In the rotation motion mode, a cos4 waveform was used for respiration, with respiratory periods of 3, 4, 5, 6, 7 and 8 s, head-foot motion set amplitudes of 5, 10 and 15 mm, and anterior-posterior (AP) and left-right (LR) motion set amplitudes in three combinations ([2.5, 2.5] mm, [2.5, 5.0] mm, [5.0, 5.0] mm), resulting in a total of 54 motion combinations. In the actual respiratory waveform mode, respiratory waveforms of 5 randomly selected patients from Affiliated Cancer Hospital of Zhengzhou University were obtained. Under each motion combination, TrueFISP cine images (30 frames, with an acquisition time of 11 s per frame) were obtained. The code was used to automatically identify the two-dimensional coordinates of the center of the simulated tumor in each image, and sin and cos4 functions were separately employed to fit the tumor position in the motion direction, thereby obtaining the fitted motion period and amplitude. The difference between the maximum and minimum values of the tumor's center coordinates in the head-to-foot direction is taken as the range of movement, referred to as the calculated amplitude. For the actual respiratory waveform, the distance between the measured maximum and minimum positions is used to calculate the amplitude.Results:In the head-foot motion mode, the fitted amplitudes of both sin and cos4 waveforms deviated from the set amplitudes by 0-0.51 mm, with relative deviations of 0%-4.2%. The deviation range between the calculated amplitudes and the set amplitudes of the two waveforms were 0.08-0.94 mm, with relative deviations of 1.1%-6.3%. In the rotation motion mode, the fitted amplitudes deviated from the set amplitudes by 0-0.61 mm, with relative deviations of 0%-6.2%. And the deviation range between the calculated amplitudes and the set amplitudes were 0.16-0.94 mm, with relative deviations of 0%-6.3%. In the actual respiratory waveform motion mode, the deviation range between the calculated amplitudes and the set amplitudes were 0.10-0.48 mm, with relative deviations of 2.2%-8.6%.Conclusion:TrueFISP cine sequences show minimal deviations in determining the range of tumor head-foot motion and effectively captures the tumor's movement state, thereby providing important support for the precise definition of the tumor movement target area during radiotherapy .

Objective: To investigate the genetic and genomic profiling of juvenile myelomonocytic leukemia (JMML) and factors affecting its survival rate. Methods: Clinical characteristics, cytogenetics, molecular biology results and survival status of children with 27 JMML cases admitted to the Hematology Department of Children's Hospital, Capital Institute of Pediatrics from December 2012 to December 2021 were analyzed retrospectively, and the outcomes of the children were followed up. Kaplan-Meier method was used for survival analysis. Univariate analysis was used for analyzing factors affecting the overall survival (OS) rates of patients who received hematopoietic stem cell transplantation (HSCT). Log-Rank test was used for comparison of survival curves. Results: Among 27 JMML cases, there were 11 males and 16 females. The age of disease onset was 28 (11,52) months. There are 20 cases of normal karyotype, 4 cases of monosomy 7, 1 case of trisomy 8,1 case of 11q23 rearrangement and 1 case of complex karyotype. A total of 39 somatic mutations were detected.Those involved in RAS signal pathway were the highest (64%(25/39)), among which PTPN11 mutation was the most frequent (44% (11/25)). A total of 17 cases (63%) received HSCT, 8 cases (30%) did not receive HSCT, and 2 cases (7%) lost follow-up. For children receiving transplantation, the follow-up time after transplantation was 47 (11,57) months. The 1-year OS rate of high-risk transplantation group (17 cases) and high-risk non transplantation group (6 cases) was (88±8)% and (50±20)% respectively, with a statistically significant difference (χ²=5.01, P=0.025). The 5-year OS rate of the high-risk transplantation group was (75±11)%. The survival time of those who relapsed or progressed to acute myeloid leukemia after transplantation was significantly shorter than that of those who did not relapse (χ²=6.80, P=0.009). The OS rate of patients with or without PTPN11 mutation was (81±12) % and (67±19)% respectively (χ²=0.85, P=0.356). Conclusions: The main pathogenesis involved in JMML is gene mutation related to RAS signaling pathway, and the most common driver gene of mutation is PTPN11. Allogeneic HSCT can significantly improve the survival rate of high-risk JMML patients. The recurrence or progression after transplantation was related to poor prognosis.
Male ; Female ; Child ; Humans ; Child, Preschool ; Leukemia, Myelomonocytic, Juvenile/therapy* ; Retrospective Studies ; Survival Analysis ; Mutation ; Hematopoietic Stem Cell Transplantation

As a natural product with a long history of medicinal use, parthenolide has aroused great interest of chemists and biologists. Existing studies have shown that it has anti-inflammatory, antitumor and other pharmacological activities, and also revealed its action on NF-κB signaling pathway, DNMT1 enzyme and Wnt/β-catenin signaling pathway. But its biological targets remain to be elucidated systematically. Proteolysis Targeting Chimeras (PROTAC) provides a new strategy for target discovery of natural products, which can be used to explore the panorama of protein changes in cells through proteomic investigation, so as to analyze their potential targets. Based on this idea, current study designed and synthesized 20 parthenolide-derived degraders. After measured their antitumor activity in vitro, selected compounds were carried out the proteomic experiment. Finally, 139 down-regulated differentially expressed proteins were identified and the discovery of parthenolide interacting protein was preliminarily explored.

An automatic ash-removal heat-sensitive moxibustion device was developed, which could keep relatively constant temperature of heat-sensitive moxibustion, and realize the automatic ignition and automatic ash removal of moxa sticks during heat-sensitive moxibustion. The automatic ash-removal heat-sensitive moxibustion device comprises a bracket and a moxibustion box fixed on the top of the bracket; the bracket is composed of a base and a movable telescopic arm. This device can solve the problems of temperature instability, moxa ash blocking heat transfer and moxa ash falling during heat-sensitive moxibustion, avoiding the scalding caused by moxa ash falling, and reduce the workload of medical staff.
Humans ; Hot Temperature ; Moxibustion ; Temperature

The study investigated the effect of Buyang Huanwu Decoction(BYHWD) on endogenous biomarkers in the urine of rats with chronic inflammation induced by lipopolysaccharide(LPS) using ultra-high performance liquid chromatography-quadrupole-time-of-flight-mass spectrometry(UPLC-Q-TOF-MS), aiming to elucidate the molecular mechanism underlying the therapeutic effect of BYHWD on chronic inflammation from a metabolomics perspective. Male SD rats were randomly divided into a normal group, a model group, and low-, medium-, and high-dose BYHWD groups(7.5, 15, and 30 g·kg~(-1)). The model group and BYHWD groups received tail intravenous injection of LPS(200 μg·kg~(-1)) on the first day of each week, followed by oral administration of BYHWD once a day for four consecutive weeks. Urine samples were collected at the end of the administration period, and UPLC-Q-TOF-MS was used to analyze the metabolic profiles of the rat urine in each group. Multivariate statistical analysis methods such as principal component analysis(PCA), partial least squares-discriminant analysis(PLS-DA), and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to analyze the effect of BYHWD on endogenous metabolites. One-way ANOVA and variable importance for the projection(VIP) were used to screen for potential biomarkers related to chronic inflammation. The identified biomarkers were subjected to pathway and enrichment analysis using MetaboAnalyst 5.0. A total of 25 potential biomarkers were screened and identified in the rat urine in this experiment. Compared with the normal group, the model group showed significant increases in the levels of 14 substances(P<0.05) and significant decreases in the levels of 11 substances(P<0.05). BYHWD was able to effectively reverse the trend of most endogenous biomarkers. Compared with the model group, BYHWD significantly down-regulated 13 biomarkers(P<0.05) and up-regulated 10 biomarkers(P<0.05). The metabolic products were mainly related to the biosynthesis of pantothenic acid and coenzyme A, tryptophan metabolism, retinol metabolism, and propionate metabolism. BYHWD has therapeutic effect on chronic inflammation induced by LPS, which may be related to its ability to improve the levels of endogenous metabolites, enhance the body's anti-inflammatory and antioxidant capabilities, and restore normal metabolic activity.
Rats ; Male ; Animals ; Chromatography, High Pressure Liquid/methods* ; Lipopolysaccharides ; Rats, Sprague-Dawley ; Metabolomics/methods* ; Inflammation/drug therapy* ; Biomarkers/urine*

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.
Adult ; Cone-Beam Computed Tomography ; Dental Implants ; Esthetics, Dental ; Female ; Gingiva/anatomy & histology* ; Humans ; Male ; Maxilla/diagnostic imaging* ; Tooth Crown ; Young Adult