OBJECTIVE: To establish a similarity measurement model for patients with dentofacial deformity based on 3D craniofacial features and to validate the similarity results with quantifying subjective expert scoring. METHODS: In the study, 52 cases of patients with skeletal Class Ⅲ malocclusions who underwent bimaxillary surgery and preoperative orthodontic treatment at Peking University School and Hospital of Stomatology from January 2020 to December 2022, including 26 males and 26 females, were selected and divided into 2 groups by sex. One patient in each group was randomly selected as a reference sample, and the others were set as test samples. Three senior surgeons rated the similarity scores between the test samples and the reference sample. Similarity scores ranged from 1 to 10, where 1 was completely different, and 10 was exactly the same. Scores larger than 7.5 was considered as clinically similar. Preoperative cone beam computed tomography (CBCT) and 3D facial images of the patients were collected. The three-dimensional hard and soft tissue features, including distances, angles and 3D point cloud features were extracted. The similarity measurement model was then established to fit with the experts' similarity scoring by feature selection algorithm and linear regression model. To verify the reliability of the model, 14 new patients were selected and input to similarity measurement model for finding similar cases. The similarity scoring of these similar cases were rated by experts, and used to evaluate the reliability of the model. RESULTS: The similarity metric models indicated that the features of the middle and lower craniofacial features were the main features to influence the craniofacial similarity. The main features that were related to the expert' s similarity scoring included distance of anterior nasal spine-menton (ANS-Me), distance of right upper canion point-Frankfurt horizontal plane (U3RH), distance of left superior point of the condyle-left gonion (CoL-GoL), distance of left gonion-menton (CoL-Me), distance of pogonion-midsagittal plane (Pog-MSP), distance of right alar base-left alar base (AlR-AlL), angle of pronasale-soft tissue pogonion-labrale inferius (Pn-Pog' -Li), distance of trichion-right tragus (Tri-TraR), distance of left exocanthion-left alar base (ExL-AlL), lower 1/3 of skeletal face, middle and lower 2/3 of skeletal face and upper lip region of soft tissue. Fourteen new patients were chosen to evaluate the model. The similar cases selected by the model had an average experts' similarity scoring of 7.627± 0.711, which was not significantly different with 7.5. CONCLUSION The similarity measurement model established by this model could find the similar cases which highly matched experts' subjective similarity scoring. The study could be further used for similar cases retrieval in skeletal Ⅲ malocclusion patients.
Humans ; Male ; Female ; Imaging, Three-Dimensional/methods* ; Cone-Beam Computed Tomography ; Malocclusion, Angle Class III/surgery* ; Orthognathic Surgical Procedures/methods* ; Face/anatomy & histology* ; Cephalometry/methods* ; Adult ; Adolescent ; Dentofacial Deformities/surgery* ; Young Adult

OBJECTIVES: This study aimed to analyze the application value of a modified tragus edge incision and transmasseteric anteroparotid approach to condyle reconstruction. METHODS: Condyle reconstruction was performed in 16 patients (9 females and 7 males) with modified tragus edge incision and transmasseteric anteroparotid approach. After regular follow-up, the function of condyle reconstruction was evaluated by clinical indicators, such as parotid salivary fistula, facial nerve function, mouth opening, occlusal relationship, and facial scar. The morphology of rib graft rib cartilage was evaluated by imaging indicators, such as panoramic radiography, CT, and three-dimensional CT image reconstruction. RESULTS: At 6-36 months postoperative follow-up, all patients had good recovery of facial appearance, concealed incisional scar, no parotid salivary fistula, good mouth opening, and occlusion. One case had temporary facial paralysis and recovered after treatment. Radiographic evaluation further showed that costochondral graft survived in normal anatomic locations. CONCLUSIONS The modified tragus edge incision and transmasseteric anteroparotid approach can effectively reduce parotid salivary fistula and facial nerve injury in condylar reconstruction. The surgical field was clearly exposed, and the incision scar was concealed without increasing the incidence of other complications. Thus, this approach is worthy of clinical promotion.
Male ; Female ; Humans ; Mandibular Condyle/surgery* ; Cicatrix/surgery* ; Fracture Fixation, Internal/methods* ; Mandibular Fractures/surgery* ; Oral Surgical Procedures/methods* ; Treatment Outcome

OBJECTIVE: To summarize the application and recent development of orthognathic surgery in treating syndromic craniosynostosis. METHODS: The related literature at home and abroad in recent years was extensively reviewed, and the indications, routine procedures, and protocols of orthognathic surgery in the treatment of syndromic craniosynostosis were summarized and analyzed. RESULTS: Craniosynostosis is a common congenital craniofacial malformation. Syndromic craniosynostosis usually involves premature fusion of multiple cranial sutures and is associated with other deformities. Orthognathic surgery is the necessary and effective means to improve the midfacial hypoplasia and malocclusion. Le Fort I osteotomy combined with sagittal split ramus osteotomy are the common surgical options. Orthognathic surgery should combine with craniofacial surgery and neurosurgery, and a comprehensive long-term evaluation should be conducted to determine the best treatment plan. CONCLUSION Orthognathic surgery plays an important role in the comprehensive diagnosis and treatment of syndromic craniosynostosis. The development of digital technology will further promote the application and development of orthognathic surgery in the treatment of syndromic craniosynostosis.
Humans ; Orthognathic Surgery ; Craniosynostoses/surgery* ; Osteotomy ; Osteotomy, Sagittal Split Ramus

OBJECTIVE: To evaluate the changes of periodontal phenotype (width of keratinized gingiva, thickness and height of alveolar bone) of lower anterior teeth in patients with skeletal class Ⅲ malocclusion before and after the periodontal-orthodontic-orthognathic combined treatment. METHODS: In the study, 20 patients with skeletal class Ⅲ malocclusion (6 males and 14 females) completed the periodontal-orthodontic-orthognathic combined treatment were included from March 2017 to June 2022, with 39 central incisors, 40 lateral incisors and 40 canines. The mean age was (25.40±4.27) years (20-34 years). The mean follow-up time was (3.70±1.05) years from the beginning of periodontal corticotomy regenerative surgery (PCRS) to the end of the combined treatment. Cone-beam computed tomography (CBCT) was used to measure the thickness, area and height of alveolar bone by the same researcher, taken before the PCRS (T0), 6 months after the PCRS (T1), 12 months after the PCRS (T2), before the orthognathic surgery (T3), and after the periodontal-orthodontic-orthognathic combined treatment (T4). The periodontal clinical parameters were used to evaluate changes in the soft tissue by another researcher, measured before the PCRS (T0) and after the combined treatment (T4). Changes of soft and hard tissue were evaluated by the periodontal phenotype. RESULTS: The width of keratinized gingiva increased significantly (all P < 0.001) in lower anterior teeth, the central incisors, lateral incisors and canines increased by (1.82±1.57) mm, (2.03±1.48) mm and (2.05±1.27) mm, respectively. The proportion of thick periodontal biotype in the central and lateral incisors increased significantly (all P < 0.001), while the changes of periodontal biotypes in the lower canines were not obvious. The thickness of labial alveolar bone of lower anterior teeth all increased significantly after periodontal corticotomy regenerative surgery and the combined treatment (all P < 0.001). The area of labial alveolar bone of lower anterior teeth also increased significantly after the combined treatment (all P < 0.001). The whole area of labial and lingual alveolar bone of central and lateral incisors increased (P < 0.001), while the whole area of canines remained the same. All The height of the alveolar bone increased (all P < 0.001) on the labial side after the treatment. CONCLUSION The periodontal phenotypes of lower anterior teeth were significantly improved after the periodontal-orthodontic-orthognathic combined treatment in patients with skeletal Angle class Ⅲ malocclusion. The improvement was long-termly stable, and the periodontal risk was reduced.
Male ; Female ; Humans ; Malocclusion, Angle Class III/surgery* ; Oral Surgical Procedures ; Incisor ; Cone-Beam Computed Tomography/methods*

OBJECTIVE: To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT). METHODS: Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions. RESULTS: After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042). CONCLUSION This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Humans ; Malocclusion, Angle Class III ; Malocclusion, Angle Class II/surgery* ; Facial Bones ; Incisor ; Orthognathic Surgical Procedures ; Cone-Beam Computed Tomography ; Mandible

Dentofacial deformities secondary to condylar hyperplasiais a kind of disease presenting facial asymmetry, malocclusion, temporomandibular joint dysfunction, and other symptoms caused by non-neoplastic hyperplasia of the condyle. The etiology is still unknown, and currently, pre- and post-operative orthodontics accompanied by orthognathic surgery, temporomandibular joint surgery and jawbone contouring surgery are the main treatment methods. A personalized treatment plan was developed, considering the active degree of condyle hyperplasia, the severity of the jaw deformity, and the patient's will, to correct deformity, obtain ideal occlusal relationship, and regain good temporomandibular joint function. Combined with the author's clinical experience, the etiology, clinical and imageological features, treatment aims, and surgical methods of condylar hyperplasia and secondary dentofacial deformities were discussed in this paper.
Humans ; Dentofacial Deformities/pathology* ; Hyperplasia/pathology* ; Mandibular Condyle/surgery* ; Orthognathic Surgical Procedures ; Temporomandibular Joint/surgery*

Orthognathic surgery, which involve osteotomy and repositioning of the maxillomandibular complex, has recently emerged as a crucial method of correcting dentofacial deformities. The optimal placement of the maxillomandibular complex holds utmost significance during orthognathic surgery because it directly affects the surgical outcome. To accurately achieve the ideal position of the maxillomandibular complex, with the rapid advancements in digital surgery and 3D-printing technology, orthognathic surgery has entered an era of "Precision Surgery" from the pervious "Empirical Surgery." This article provides comprehensive insights into our extensive research and exploration of the treatment modality known as "precision orthognathic surgery" over the years. We also present the technical system and application in"Ortho+X" treatment modality to offer valuable references and assistance to our colleagues in the field.
Orthognathic Surgery ; Orthognathic Surgical Procedures ; Printing, Three-Dimensional ; Surgery, Computer-Assisted

The application of digital technology in the diagnosis and treatment of oral and maxillofacial surgery has promoted the gradual transition from the traditional experience-dependent diagnosis and treatment mode to digital surgery. However, there are some limitations in the application of digital surgical technology. Recently, artificial intelligence has shown tremendous development. The oral and maxillofacial surgery with the goal of digitalization and intelligence has become an important direction of the development of the discipline. Based on the research results domestic and abroad, we discuss the application status and existing problems of artificial intelligence in oral and maxillofacial surgery, in order to promote the further development of artificial intelligence in oral and maxillofacial surgery.
Artificial Intelligence ; Surgery, Oral

Computer-assisted technology are gradually integrated into dental education and clinical treatment. As a cutting-edge technology in computer-aided medicine, augmented reality can not only be used as an aid to dental education by presenting three-dimensional scenes for teaching demonstration and experimental skills training, but also can superimpose virtual image information of patients onto real lesion areas for real-time feedback and intraoperative navigation. This review explores the current applications and limitations of augmented reality in dentistry to provide a reference for future research.
Humans ; Augmented Reality ; Oral Medicine ; Surgery, Computer-Assisted/methods* ; Imaging, Three-Dimensional

In recent years, with the rapid development of digital technology, the application of oral virtual patients in prosthodontics, orthodontics, oral and maxillofacial surgery, and other disciplines has gradually increased. Although the focus on oral virtual patients varies in different disciplines, the application of oral virtual patients in assisting the prediction of treatment effects and the formulation of treatment plans will have good prospects. The construction accuracy and presentation effects of oral virtual patients can be influenced by the source of three-dimensional (3D) image, and methods of registration. Based on the studies and clinical experiences of our team, researches of other teams, the source of 3D images, the construction methods, and the clinical applications of virtual patients in prosthodontics will be presented, so as to provide a reference for normalized application and development of oral virtual patients and to offer a future development direction of oral virtual patients.
Humans ; Prosthodontics/methods* ; Imaging, Three-Dimensional ; Orthodontics ; Surgery, Oral