Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Objective: We evaluated the occupational exposure levels of healthcare workers while conducting rotational pressurized intraperitoneal aerosol chemotherapy (RIPAC) using cisplatin in a large animal model. Methods: We performed RIPAC using cisplatin in 6 female pigs and collected surface and air samples during the procedure. Surface samples were obtained from RIPAC devices and personal protective equipment (PPE) by wiping, and air samples were collected around the operating table.All samples were analyzed by inductively coupled plasma–mass spectrometry to detect platinum. Results: Among all surface samples (n=44), platinum was detected in 41 samples (93.2%) but not in all air samples (n=16). Among samples collected from RIPAC devices (n=23), minimum and maximum cisplatin levels of 0.08 and 235.09 ng/cm2 were detected, mainly because of direct aerosol exposure in the abdominal cavity. Among samples collected from healthcare workers’ PPE (n=21), 18 samples (85.7%) showed contamination levels below the detection limit, with a maximum of 0.23 ng/cm2 . There was no significant contamination among samples collected from masks, shoes, or gloves. Conclusion During the RIPAC procedures, there is a potential risk of dermal exposure, as platinum, a surrogate material for cisplatin, was detected at low concentration levels in some surface samples. However, the respiratory exposure risk was not identified, as platinum was not detected in the airborne samples in this study.

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16–56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16–56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

This study assessed the clinical performance of 150 third-year medicalstudents in Busan, Korea in a whole-task emergency objective structured clinical examination station that simulated a patient with palpitations visiting the emergency department. The examination was conducted from November 25 to 27, 2019. Clinical performance was assessed as the number and percentage of students who performed history-taking (HT), a physical examination (PE), an electrocardiography (ECG) study, patient education (Ed), and clinical reasoning (CR), which were items on the checklist. It was found that 18.0% of students checked the patient’s pulse, 51.3% completed an ECG study, and 57.9% explained the results to the patient. A sizable proportion (38.0%) of students did not even attempt an ECG study. In a whole-task emergency station, students showed good performance on HT and CR, but unsatisfactory results for PE, ECG study, and Ed. Clinical skills educational programs for subjected student should focus more on PE, timely diagnostic tests, and sufficient Ed.

OBJECTIVE: It is necessary to develop new guidelines to delineate the best ways of providing psychosocial care to ensure mental health following a disaster. METHODS: This study applied the scoping review method as a means of establishing evidence-based guidelines for disaster mental health services. A total of 440 literatures were selected through a scoping review of 20,864 documents. Twenty-three recognized experts were invited to participate in the survey and a two-round online Delphi survey was conducted. RESULTS: The concordance rate in the Delphi Round 1 was 95.1%. Six items were excluded and new items were formulated with experts’ suggestions. A total of 23 statements were slightly modified to clarify their meaning. In the Delphi Round 2, all items were met with consensus. The three items with the highest consensus among the experts were related to the protection of personal information and privacy. The item with the lowest consensus among experts was related to debriefing. Other items were related to establishing mental health support centers and suicide prevention activities. CONCLUSION 140 items were developed through scoping reviews based on evidence-based methodology. These items were used to describe the disaster mental health support identified in Delphi. The guideline will provide a foundation for effective preparation and response in disaster situations.

BACKGROUND: Intraosseous lipoma is a very rare lesion that constitutes no more than 0.1% of all bone tumors. We analyzed 21 cases of intraosseous lipoma at a single institution for clinical and radiographic characteristics. METHODS: A retrospective study was performed on 21 pathologically confirmed intraosseous lipomas treated in our hospital from 2000 to 2017. Simple X-ray and magnetic resonance imaging findings and medical records were reviewed. Patients' age, sex, and clinical symptoms were investigated. From the radiographic images, the site of the lesion, calcification, bony expansion, and stage of the lesion were evaluated. Correlations between the degree of involution and clinical symptoms were analyzed. RESULTS: The mean age of patients was 50 years (range, 20 to 67 years), and there were 13 males and eight females. The mean lesion size was 6.1 cm (range, 2.5 to 13.6 cm). The most common anatomical site of the lesion was the femur (seven cases), and three cases occurred in flat bones such as the ilium and scapula. Visual analogue scale score for pain was 3 to 6 in 15 patients. There were no complaints of functional limitation. There was no correlation between the degree of degeneration and clinical symptoms (p = 1.000). Curettage was performed as a surgical treatment in 20 patients, and bone graft was performed using a bone chip. Excision was performed in one patient. Pain was resolved in seven of 11 patients with a complaint of preoperative pain; intermittent pain remained in four cases. There was no local recurrence or malignant change during the follow-up. CONCLUSIONS: There was no correlation between the degree of degeneration and clinical symptoms. Pain was the most common clinical symptom, but it was rarely accompanied by functional limitation. However, it is important to distinguish it from other pain-inducing disorders. The incidence of intraosseous lipomas is low, and detection based on various imaging findings can be difficult. Clear understanding of the radiographic findings and symptoms of intraosseous lipoma is helpful for diagnosis and differentiation.
Bone Neoplasms ; Curettage ; Diagnosis ; Female ; Femur ; Follow-Up Studies ; Humans ; Ilium ; Incidence ; Lipoma* ; Magnetic Resonance Imaging ; Male ; Medical Records ; Recurrence ; Retrospective Studies ; Scapula ; Transplants

Although student research programs have been implemented worldwide, research programs during premedical school have unique characteristics. The purpose of this study is to evaluate factors that influence the effects of premedical school research programs. Eighty second-year premedical students at Pusan National University were included in the study. Effect elements and influential factors were extracted through reference reviews and in-depth individual interviews. A Likert scale questionnaire was developed using the extracted elements and factors, and Cronbach's alpha coefficient was used to analyze the reliability of the survey. The mean value and the standard deviation for each question were calculated to evaluate education effectiveness and learning satisfaction, and the influence of each factor on effect was analyzed using correlation analysis. Students' research skills and knowledge were improved in the short term; however, interest in research or in a career as a researcher did not increase. Student interest, participation, and contributions were important factors. Among professors, passion, considerateness, and teaching method including the level of lesson were influential factors. Implementation of curriculum and support and guidance were influential as well, whereas evaluation system was not a factor. To improve student research programs, several factors that influence education effectiveness and learning satisfaction should be considered.
Busan ; Curriculum ; Education ; Education, Premedical ; Humans ; Learning ; Program Evaluation ; Students, Medical ; Students, Premedical ; Teaching

Biofilms are commonly associated with an increased risk of catheter-associated infection. To study the efficacy of materials designed to reduce biofilm formation, microbial biofilms on clinically used urinary catheter were examined. We performed 2, 3-bis (2-methyoxy-4-nitro-5-sulfo-phenyl)-2H-tetrazolium-5-carboxanilide (XTT) reduction assay to determine of biofilm formation ability and observed with scanning electron microscopy (SEM) to analyze biofilm architecture. Additionally, we calculated relative cell surface hydrophobicity (CSH) to measure hydrophobicity of microorganisms. On SEM, catheter surfaces made of latex or anti-infective (IC)-latex were rough but those of silicone, hydrogel-coated silicone (HCS), or silver-alloy-coated silicone (SCS) were relatively smoother. According to XTT reduction assay, biofilm formation was reduced on the surface of smooth silicone-based catheters compared to rough latex-based catheters. The greatest to lowest formation of microbial biofilm were as follows for these material types: silicone-elastomer-coated (SEC) latex > latex > silicone > IC-latex > HCS > SCS. Catheter materials can affect the microbial biofilm formations. First, rougher surfaces on the catheter made the microbial attachment easier and a greater amount of biofilm was formed. Second, when chemicals that inhibit growth and attachment of microorganisms on the inner and outer surfaces of the catheters were applied, the biofilm formation was inhibited. SCS was found to be the most effective in reducing the microbial biofilm formation. These results indicate that microbial biofilm formation may be closely related to the surface roughness and microbial CSH.
Biofilms* ; Catheter-Related Infections ; Catheters ; Hydrophobic and Hydrophilic Interactions ; Latex ; Microscopy, Electron, Scanning ; Silicon ; Silicones ; Urinary Catheters*