Objective: As the demand for community mental health services continues to grow, the need for well-equipped and organized services has become apparent. This study aimed to optimize the roles and infrastructure of mental health services, by establishing, among other initiatives, standardized operating models. Methods: The study was conducted in multiple phases from May 12, 2021, to December 29, 2021. Stakeholders within South Korea and metropolitan mental health welfare centers were targeted, but addiction management support centers, including officials, patients, and their families, were integrated as well. A literature review and survey, focus group interviews, a Delphi survey, and expert consultation contributed to comprehensive revisions and improvements of the mental health service model. Results: The proposed model for community mental health welfare centers emphasizes the expansion of personnel and infrastructure, with a focus on severe mental illnesses and suicide prevention. The model for metropolitan mental health welfare centers delineates essential tasks in areas such as project planning and establishment, community research, and education about severe mental illnesses. The establishment of a 24-hour emergency intervention center was a crucial feature. In the integrated addiction support center model, the need to promote addiction management is defined as an essential task and the establishment of national governance for addiction policies is recommended. Conclusion This study proposed standard operating models for three types of mental health service centers. To meet the increasing need for community care, robust mental health service delivery systems are of primary importance.

Background/Aims: Krebs von den Lungen-6 (KL-6) is associated with prognosis in patients with COVID-19. However, there is limited data on the correlation between the prognosis of COVID-19 and varying KL-6 levels at different time points. We investigated the optimal cutoff values of the initial and peak serum KL-6 levels to predict mortality and evaluated their correlation with mortality. Methods: This retrospective cohort study collected data on serially collected serum KL-6 levels in patients hospitalized with COVID-19 between October 2020 and January 2022 at a single tertiary hospital in South Korea. The area under the receiver operating characteristic curve and Youden index were used to determine the cutoff points for the initial and peak KL-6 levels that best predicted 30-day mortality. The association between the initial and peak KL-6 values was assessed by univariate and multivariate logistic regression models. Results: A total of 349 patients were included in this study. The mean initial and peak KL-6 levels were significantly higher in the non-survivor group than in the survivor group. The initial and peak KL-6 values that best predicted 30-day mortality were 491.85 U/mL and 660.05 U/mL, respectively. An initial KL-6 level greater than 491.85 U/mL and a peak KL-6 level greater than 660.05 U/mL were significantly associated with 30-day mortality. Conclusions The initial and peak levels of KL-6 were significantly associated with 30-day mortality in hospitalized patients with COVID-19. These findings suggest that serially monitoring blood KL-6 levels could be a valuable prognostic indicator for COVID-19.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

It is difficult to determine a cause of bile duct stricture and dilatation. Eosinophilic cholangitis, a rare benign condition, may be one cause of bile duct stricture and dilatation. It can be evaluated using various methods of histopathology, radiographs, endoscopy, and hematologic findings. Treatment generally involves steroid therapy which can lead to improvement. This case report will discuss eosinophilic cholangitis, emphasizing that while it can easily be overlooked but should be considered in differential diagnoses.

Radiofrequency ablation (RFA) is a minimally invasive treatment modality used as an alternative to surgery in patients with benign thyroid nodules, recurrent thyroid cancers (RTCs), and primary thyroid microcarcinomas. The Korean Society of Thyroid Radiology (KSThR) initially developed recommendations for the optimal use of RFA for thyroid tumors in 2009 and revised them in 2012 and 2017. As new meaningful evidence has accumulated since 2017 and in response to a growing global interest in the use of RFA for treating malignant thyroid lesions, the task force committee members of the KSThR decided to update the guidelines on the use of RFA for the management of RTCs based on a comprehensive analysis of current literature and expert consensus.

Objective: To test the performance of an artificial intelligence-based computer-aided diagnosis (AI-CAD) designed for fullfield digital mammography (FFDM) when applied to synthetic mammography (SM). Materials and Methods: We analyzed 501 women (mean age, 57 ± 11 years) who underwent preoperative mammography and breast cancer surgery. This cohort consisted of 1002 breasts, comprising 517 with cancer and 485 without. All patients underwent digital breast tomosynthesis (DBT) and FFDM during the preoperative workup. The SM is routinely reconstructed using DBT. Commercial AI-CAD (Lunit Insight MMG, version 1.1.7.2) was retrospectively applied to SM and FFDM to calculate the abnormality scores for each breast. The median abnormality scores were compared for the 517 breasts with cancer using the Wilcoxon signed-rank test. Calibration curves of abnormality scores were evaluated. The discrimination performance was analyzed using the area under the receiver operating characteristic curve (AUC), sensitivity, and specificity using a 10% preset threshold. Sensitivity and specificity were further analyzed according to the mammographic and pathological characteristics.The results of SM and FFDM were compared. Results: AI-CAD demonstrated a significantly lower median abnormality score (71% vs. 96%, P < 0.001) and poorer calibration performance for SM than for FFDM. SM exhibited lower sensitivity (76.2% vs. 82.8%, P < 0.001), higher specificity (95.5% vs.91.8%, P < 0.001), and comparable AUC (0.86 vs. 0.87, P = 0.127) than FFDM. SM showed lower sensitivity than FFDM in asymptomatic breasts, dense breasts, ductal carcinoma in situ, T1, N0, and hormone receptor-positive/human epidermal growth factor receptor 2-negative cancers but showed higher specificity in non-cancerous dense breasts. Conclusion AI-CAD showed lower abnormality scores and reduced calibration performance for SM than for FFDM.Furthermore, the 10% preset threshold resulted in different discrimination performances for the SM. Given these limitations, off-label application of the current AI-CAD to SM should be avoided.

Background: Sanger sequencing is a technology used to identify the gene sequence variants causing rare genetic disorders. However, designing and implementing a proficiency scheme for Sanger sequencing-based genetic testing is challenging because many molecular diagnostic laboratories are running sequencing tests for tens to hundreds of target genes. As such, we aimed to design and implement a method-based proficiency testing (PT) method for Sanger sequencing and to assess its feasibility in Korea. Methods: A pathogenic low density lipoprotein receptor (LDLR) variant was chosen as the positive PT material, and material without an LDLR variant was used as the negative PT material. We distributed the two PT materials with primer pair sets to 17 molecular diagnostic laboratories nationwide.We calculated the correct results (%) for variation type, zygosity, nucleotide change, amino acid change, variant classification, and clinical interpretation. Results: Fourteen laboratories responded to the survey. The results for the two PT materials were 100% correct for all evaluation points including variant type, zygosity, nucleotide change, amino acid change, variant classification, and clinical interpretation. Conclusions This pilot PT survey demonstrates a feasibility of using method-based PT for assessing the Sanger sequencing performance of molecular diagnostic laboratories in Korea.

Objective: To analyze costs and cost-effectiveness of transforaminal endoscopic thoracic discectomy (TETD) for the treatment of symptomatic thoracic disc herniation (TDH) and compare it with open microdiscectomy (MD). Methods: This retrospective cohort study included patients who underwent TETD or MD for symptomatic TDH and had a minimum follow-up of 1 year. Cost analysis included direct costs (primary and secondary hospital costs), indirect costs (lost wages due to work absence), total costs (direct + indirect), and cost-effectiveness (cost per quality-adjusted life year [QALY] and incremental cost-effectiveness ratio [ICER]). Clinical outcomes included patient-reported outcome measures (Oswestry Disability Index [ODI], 36-item Short Form health survey [SF-36]), QALY gained, and reoperation and readmission rates at 1 year. TETD and MD groups were compared for outcome measures. Results: A total of 111 patients (57 TETD, 54 MD) were included. The direct ($6,270 TETD vs. $7,410 MD, p < 0.01), indirect costs ($1,250 TETD vs. $1,450 MD, p < 0.01), total costs ($7,520 TETD vs. $8,860 MD, p < 0.01), and cost per QALY ($31,333 TETD vs. $44,300 MD, p < 0.01) were significantly lower for TETD compared to MD. ICER of TETD was found to be -$33,500. At 1 year, TETD group showed significantly greater improvement in ODI (46% vs. 36%, p < 0.01) and SF-36 (64% vs. 53%, p < 0.01) and significantly greater QALY gained (0.24 vs. 0.2, p < 0.01) compared to MD group. No significant difference was found in reoperation and readmission rates. Conclusion TETD demonstrated significantly better clinical outcomes, lower overall costs, and better cost-effectiveness than MD in appropriately selected patients of symptomatic TDH.