Objective: To investigate the objective characteristics of tongue manifestation in different stages of damp-heat syndrome in diabetic kidney disease (DKD). Methods: A cross-sectional study enrolled 134 patients with DKD G3-5 stages who met the diagnostic criteria for damp-heat syndrome in DKD. The patients were treated at Dongzhimen Hospital, Beijing University of Chinese Medicine, from May 2023 to January 2024. The patients were divided into three groups: DKD G3, DKD G4, and DKD G5 stage, with 53, 33, and 48 patients in each group, respectively. Clinical general data (gender, age, and body mass index) and damp-heat syndrome scores were collected from the patients. The YZAI-02 traditional Chinese medicine (TCM) AI Tongue Image Acquisition Device was used to capture tongue images from these patients. The accompanying AI Open Platform for TCM Tongue Diagnosis of the device was used to analyze and extract tongue manifestation features, including objective data on tongue color, tongue quality, coating color, and coating texture. Clinical data and objective tongue manifestation characteristics were compared among patients with DKD G3-5 based on their DKD damp-heat syndrome status. Results: No statistically significant difference in gender or body mass index was observed among the three patient groups. The DKD G3 stage group had the highest age (P<0.05). The DKD G3 stage group had a lower score for symptoms of poor appetite and anorexia(P<0.05) than the DKD G5 group. No statistically significant difference was observed in damp-heat syndrome scores among the three groups. Compared with the DKD G5 stage group, the DKD G3 stage group showed a decreased proportion of pale color at the tip and edges of the tongue (P<0.05). The DKD G4 stage group exhibited an increased proportion of crimson at the root of the tongue, a decreased proportion of thick white tongue coating at the root, a decreased proportion of pale color at the tip and edges of the tongue, an increased hue value (indicating color tone) of the tongue color in the middle, an increased brightness value (indicating color lightness) of the tongue coating color in the middle, and an increased thickness of the tongue coating (P<0.05). No statistically significant difference was observed in other tongue color proportions, color chroma values, body characteristics, coating color proportions, coating color chroma values, and coating texture characteristics among the three groups. Conclusion Tongue features differ in different stages of DKD damp-heat syndrome in multiple dimensions, enabling the inference that during the DKD G5 stage, the degree of qi and blood deficiency in the kidneys, heart, lungs, liver, gallbladder, spleen, and stomach is prominent. Dampness is more likely to accumulate in the lower jiao, particularly in the kidneys, whereas heat evil in the spleen and stomach is the most severe. These insights provide novel ideas for the clinical treatment of DKD.

Emodin is a hydroxyanthraquinone compound that is widely distributed and has multiple pharmacological activities, including anti-diarrheal, anti-inflammatory, and liver-protective effects. Research indicates that emodin may be one of the main components responsible for inducing hepatotoxicity. However, studies on the mechanisms of liver injury are relatively limited, particularly those related to bile acids(BAs) metabolism. This study aims to systematically investigate the effects of different dosages of emodin on BAs metabolism, providing a basis for the safe clinical use of traditional Chinese medicine(TCM)containing emodin. First, this study evaluated the safety of repeated administration of different dosages of emodin over a 5-week period, with a particular focus on its impact on the liver. Next, the composition and content of BAs in serum and liver were analyzed. Subsequently, qRT-PCR was used to detect the mRNA expression of nuclear receptors and transporters related to BAs metabolism. The results showed that 1 g·kg~(-1) emodin induced hepatic damage, with bile duct hyperplasia as the primary pathological manifestation. It significantly increased the levels of various BAs in the serum and primary BAs(including taurine-conjugated and free BAs) in the liver. Additionally, it downregulated the mRNA expression of farnesoid X receptor(FXR), retinoid X receptor(RXR), and sodium taurocholate cotransporting polypeptide(NTCP), and upregulated the mRNA expression of cholesterol 7α-hydroxylase(CYP7A1) in the liver. Although 0.01 g·kg~(-1) and 0.03 g·kg~(-1) emodin did not induce obvious liver injury, they significantly increased the level of taurine-conjugated BAs in the liver, suggesting a potential interference with BAs homeostasis. In conclusion, 1 g·kg~(-1) emodin may promote the production of primary BAs in the liver by affecting the FXR-RXR-CYP7A1 pathway, inhibit NTCP expression, and reduce BA reabsorption in the liver, resulting in BA accumulation in the peripheral blood. This disruption of BA homeostasis leads to liver injury. Even doses of emodin close to the clinical dose can also have a certain effect on the homeostasis of BAs. Therefore, when using traditional Chinese medicine or formulas containing emodin in clinical practice, it is necessary to regularly monitor liver function indicators and closely monitor the risk of drug-induced liver injury.
Emodin/administration & dosage* ; Bile Acids and Salts/metabolism* ; Animals ; Male ; Liver/injuries* ; Chemical and Drug Induced Liver Injury/genetics* ; Drugs, Chinese Herbal/adverse effects* ; Humans ; Rats, Sprague-Dawley ; Mice ; Rats

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

The current production of Chinese herbal decoction pieces faces several issues including strong subjectivity,unstable quality,low production efficiency,and a lack of intelligent systems.In order to expedite the intelligent transformation and upgrading of Chinese medicine processing,this paper delves deeply into the problems and challenges encountered in establishing a digital and intel-ligent production model for Chinese herbal pieces.Addressing the slow progress in fundamental research on traditional Chinese medi-cine processing mechanisms,the absence of online digital quality characterization techniques,the low level of production equipment in-telligence,and the lack of evaluation standards for high-quality decoction pieces,this paper proposes a"New Quality Productive Forces"formation approach driven by technological innovation.Through interdisciplinary integration methods,the paper explores the mechanisms of Chinese medicine processing in depth,clarifies the correlation between the processing procedures and the"medicinal properties-quality"relationship,and employs bionic sensing and artificial intelligence to achieve a holistic quality characterization of decoction pieces.Additionally,the use of cloud-edge collaborative big data systems is proposed to enhance intelligent upgrades of the production lines.The paper also aims to establish a high-quality decoction piece evaluation system integrating"physical-chemical-bio-logical"multimodal data fusion.This approach aims to steer the Chinese medicine processing towards becoming more efficient,precise,and sustainable,thereby promoting high-quality sustainable development of the Chinese herbal decoction industry and providing both theoretical and practical support for the modernization of traditional Chinese medicine.

Objective To investigate the clinical characteristics and prognosis of pneumococcal meningitis(PM),and drug sensitivity of Streptococcus pneumoniae(SP)isolates in Chinese children.Methods A retrospective analysis was conducted on clinical information,laboratory data,and microbiological data of 160 hospitalized children under 15 years old with PM from January 2019 to December 2020 in 33 tertiary hospitals across the country.Results Among the 160 children with PM,there were 103 males and 57 females.The age ranged from 15 days to 15 years,with 109 cases(68.1% )aged 3 months to under 3 years.SP strains were isolated from 95 cases(59.4% )in cerebrospinal fluid cultures and from 57 cases(35.6% )in blood cultures.The positive rates of SP detection by cerebrospinal fluid metagenomic next-generation sequencing and cerebrospinal fluid SP antigen testing were 40% (35/87)and 27% (21/78),respectively.Fifty-five cases(34.4% )had one or more risk factors for purulent meningitis,113 cases(70.6% )had one or more extra-cranial infectious foci,and 18 cases(11.3% )had underlying diseases.The most common clinical symptoms were fever(147 cases,91.9% ),followed by lethargy(98 cases,61.3% )and vomiting(61 cases,38.1% ).Sixty-nine cases(43.1% )experienced intracranial complications during hospitalization,with subdural effusion and/or empyema being the most common complication[43 cases(26.9% )],followed by hydrocephalus in 24 cases(15.0% ),brain abscess in 23 cases(14.4% ),and cerebral hemorrhage in 8 cases(5.0% ).Subdural effusion and/or empyema and hydrocephalus mainly occurred in children under 1 year old,with rates of 91% (39/43)and 83% (20/24),respectively.SP strains exhibited complete sensitivity to vancomycin(100% ,75/75),linezolid(100% ,56/56),and meropenem(100% ,6/6).High sensitivity rates were also observed for levofloxacin(81% ,22/27),moxifloxacin(82% ,14/17),rifampicin(96% ,25/26),and chloramphenicol(91% ,21/23).However,low sensitivity rates were found for penicillin(16% ,11/68)and clindamycin(6% ,1/17),and SP strains were completely resistant to erythromycin(100% ,31/31).The rates of discharge with cure and improvement were 22.5% (36/160)and 66.2% (106/160),respectively,while 18 cases(11.3% )had adverse outcomes.Conclusions Pediatric PM is more common in children aged 3 months to under 3 years.Intracranial complications are more frequently observed in children under 1 year old.Fever is the most common clinical manifestation of PM,and subdural effusion/emphysema and hydrocephalus are the most frequent complications.Non-culture detection methods for cerebrospinal fluid can improve pathogen detection rates.Adverse outcomes can be noted in more than 10% of PM cases.SP strains are high sensitivity to vancomycin,linezolid,meropenem,levofloxacin,moxifloxacin,rifampicin,and chloramphenicol.[Chinese Journal of Contemporary Pediatrics,2024,26(2):131-138]

Objective To investigate the differences in clinical characteristics among children on prolonged mechanical ventilation(PMV)due to different primary diseases.Methods A retrospective analysis was performed on the clinical data of 59 pediatric patients requiring PMV from July 2017 to September 2022.According to the primary disease,they were divided into respiratory disease(RD)group,central nervous system(CNS)group,neuromuscular disease(NMD)group,and other disease group.The four groups were compared in terms of general information,treatment,and outcome.Results There were significant differences among the four groups in age,body weight,Pediatric Logistic Organ Dysfunction-2(PELOD-2)score,Pediatric Risk of Mortality Ⅲ(PRISM Ⅲ)score,analgesic and sedative treatment,nutrition supply,rehabilitation treatment,tracheotomy,successful ventilator weaning,and outcomes(P＜0.05).Compared with the RD group,the CNS group and the other disease group had a significantly higher age and a significantly higher proportion of children receiving rehabilitation treatment,and the CNS group had a significantly higher proportion of children receiving tracheotomy(P＜0.008).Compared with the other disease group,the CNS group and the NMD group had significantly lower PELOD-2 and PRISM Ⅲ scores,and the CNS group had a significantly higher proportion of children with successful ventilator weaning and a significantly higher proportion of children who were improved and discharged(P＜0.008).Conclusions There are differences in clinical characteristics among children receiving PMV due to different etiologies.Most children in the RD group have a younger age,and children in the CNS group have a relatively good prognosis.

Objective To explore the effect of Tongdu Tiaoshen acupuncture,a needling method for dredging governor vessel and regulating mind,on cerebral hemodynamics and oxygen free radicals in the patients with post-stroke epilepsy(PSE).Methods A total of 60 patients with PSE were randomly divided into a treatment group and a control group,with 30 cases in each group.Both groups were given basic treatment for lowering lipid level,controlling blood pressure and glucose contents,and counteracting platelet aggregation.Moreover,the control group was treated with Sodium Valproate Sustained-Release Tablets,and the treatment group was treated with Tongdu Tiaoshen acupuncture mainly on the acupoints of Baihui(GV20),Shenting(GV24),Shuigou(GV26),Fengfu(GV 16),Fengchi(GB20)based on the treatment for the control group.One month constituted a course of treatment,and the treatment for the two groups covered three courses of treatment.The number of epileptic seizures,the severity of electroencephalogram(EEG),the peak systolic velocity(Vs)and end diastolic velocity(Vd)of bilateral anterior cerebral arteries,middle cerebral arteries and posterior cerebral arteries detected by transcranial Doppler ultrasonography(TCD),and the changes in the peripheral levels of oxygen free radicals such as malondialdehyde(MDA),hydroxyl radical(OH),lipid peroxide(LPO)and superoxide dismutase(SOD)in the two groups were observed before and after treatment.After treatment,the clinical efficacy and safety of the two groups were evaluated.Results(1)After three months of treatment,the total effective rate of the treatment group was 93.33％(28/30),and that of the control group was 73.33％(23/30).The intergroup comparison(tested by chi-square test)showed that the efficacy of the treatment group was significantly superior to that of the control group(P＜0.05).(2)After treatment,the average monthly epileptic seizure frequency in the two groups was decreased when compared with that before treatment(P＜0.05),and the decrease in the treatment group was more significant than that in the control group(P＜0.05).(3)After treatment,the grading of EEG severity in the two groups was significantly improved when compared with that before treatment(P＜0.05),and the improvement in the treatment group was significantly superior to that in the control group(P＜0.05).(4)After treatment,the peripheral levels of oxygen free radicals of MDA,OH and LPO in the two groups were lower than those before treatment(P＜0.05),and the peripheral level of SOD was higher than that before treatment(P＜0.05).The decrease of MDA,OH and LPO levels and the increase of SOD level in the treatment group were significantly superior to those in the control group(P＜0.05 or P＜0.01).(5)After treatment,the values of cerebral hemodynamic indicators of Vs and Vd of both left and right anterior cerebral artery,middle cerebral artery and posterior cerebral artery in the two groups were higher than those before treatment(P＜0.05),and the increase in the treatment group was significantly superior to that in the control group,the differences being statistically significant(P＜0.05).(6)During the treatment,there were no fainting,sticking of needle,bleeding and rash occurring during acupuncture in the two groups,which indicated that the therapy had high safety.Conclusion Tongdu Tiaoshen acupuncture can significantly reduce the seizure frequency of PSE and improve the severity of epileptic EEG.Its therapeutic mechanism may be related with the decrease of the oxygen free radical levels and with the improvement of cerebral hemodynamics.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Advanced paternal age has been overlooked, and its effect on fertility remains controversial. Previous studies have focused mainly on intracytoplasmic sperm injection (ICSI) cycles in men with oligozoospermia. However, few studies have reported on men with semen parameters within reference ranges. Therefore, we conducted a retrospective cohort study analyzing the reproductive outcomes of couples with non-male-factor infertility undergoing in vitro fertilization (IVF) cycles. In total, 381 cycles included were subgrouped according to paternal age (<35-year-old, 35-39-year-old, or ≥40-year-old), and maternal age was limited to under 35 years. Data on embryo quality and clinical outcomes were analyzed. The results showed that fertilization and high-quality embryo rates were not significantly different (all P > 0.05). The pregnancy rate was not significantly different in the 35-39-year-old group (42.0%; P > 0.05), but was significantly lower in the ≥40-year-old group (26.1%; P < 0.05) than that in the <35-year-old group (40.3%). Similarly, the implantation rate significantly decreased in the ≥40-year-old group (18.8%) compared with that in the <35-year-old group (31.1%) and 35-39-year-old group (30.0%) (both P < 0.05). The live birth rate (30.6%, 21.7%, and 19.6%) was not significantly different across the paternal age subgroups (<35-year-old, 35-39-year-old, and ≥40-year-old, respectively; all P > 0.05), but showed a declining trend. The miscarriage rate significantly increased in the 35-39-year-old group (44.8%) compared with that in the <35-year-old group (21.0%; P < 0.05). No abnormality in newborn birth weight was found. The results indicated that paternal age over 40 years is a key risk factor that influences the assisted reproductive technology success rate even with good semen parameters, although it has no impact on embryo development.
Pregnancy ; Infant, Newborn ; Female ; Humans ; Male ; Adult ; Paternal Age ; Retrospective Studies ; Semen ; Fertilization in Vitro ; Reproductive Techniques, Assisted ; Oligospermia

In this study, CM-5 spectrophotometer and Heracles NEO ultra-fast gas-phase electronic nose were used to analyze the changes in color and odor of vinegar-processed Cyperi Rhizoma(VPCR) pieces. Various analysis methods such as DFA and partial least squares discriminant analysis(PLS-DA) were combined to identify different processing degrees and quantify the end point of processing. The results showed that with the increase in vinegar processing, the brightness parameter L~* of VPCR pieces decreased gradua-lly, while the red-green value a~* and yellow-blue value b~* initially increased and reached their maximum at 8 min of processing, followed by a gradual decrease. A discriminant model based on the color parameters L~*, a~*, and b~* was established(with a discrimination accuracy of 98.5%), which effectively differentiated different degrees of VPCR pieces. Using the electronic nose, 26 odor components were identified from VPCR samples at different degrees of vinegar processing. DFA and PLS-DA models were established for different degrees of VPCR pieces. The results showed that the 8-min processed samples were significantly distinct from other samples. Based on variable importance in projection(VIP) value greater than 1, 10 odor components, including 3-methylfuran, 2-methylbuty-raldehyde, 2-methylpropionic acid, furfural, and α-pinene, were selected as odor markers for differentiating the degrees of vinegar processing in VPCR. By combining the changes in color and the characteristic odor components, the optimal processing time for VPCR was determined to be 8 min. This study provided a scientific basis for the standardization of vinegar processing techniques for VPCR and the improvement of its quality standards and also offered new methods and ideas for the rapid identification and quality control of the end point of processing for other traditional Chinese medicine.
Acetic Acid ; Drugs, Chinese Herbal/analysis* ; Rhizome/chemistry* ; Quality Control ; Electronics