Recent research from the International Agency for Research on Cancer (IARC) of the World Health Organization (WHO) indicates that breast cancer is the most prevalent malignant tumor among women, posing a significant threat to women's health. Surgery remains the primary therapeutic modality for breast cancer. Recently, endoscopic and robotic breast surgical techniques have gained acceptance among both surgeons and patients. However, considerable variation exists in surgical approaches and outcomes. To standardize these techniques, facilitate their broader clinical adoption, and ultimately improve patient care, the Endoscopic-robotic Breast Surgery Clinical Trials Consortium (ErBSCTC) of China has developed this guideline. This document encompasses the technologies and instrumentation utilized in endoscopic and robotic breast surgery, surgical techniques, perioperative management, complication handling, long-term follow-up, and oncologic outcomes, aiming to provide evidence-based guidance for healthcare professionals involved in the prevention, diagnosis, and treatment of breast diseases.

Breast cancer is the most common malignant tumor among women in China, with surgery being one of the primary treatment modalities. Endoscopic/robotic breast surgery (ErBS) is gaining widespread acceptance among patients and surgeons alike due to its advantages of minimal invasiveness, superior cosmetic outcomes, and accelerated recovery. However, substantial heterogeneity currently exists across China regarding patient selection, standardized operative techniques, perioperative management, and complication handling, underscoring the urgent need for evidence-based consensus guidelines. To promote standardization and ensure consistent quality of ErBS, the Chinese Endoscopic-Robotic Breast Surgery Clinical Trials Consortium (CErBSCTC) has systematically reviewed the latest high-quality evidence and formulated the "Protocol for China Endoscopic and Robotic Breast Surgery Guidelines (2026 edition)", which outlines a comprehensive methodology for guideline development.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background: This study aimed to report the short- and midterm outcomes of arthroscopic rotator cuff repair (ARCR) and reverse shoulder arthroplasty (RSA) in weight-bearing shoulders. Methods: This retrospective multicenter study included 19 cases of ARCR and 10 cases of RSA performed in weight-bearing shoulders from 2009 to 2021. In the ARCR group, postoperative 6-month magnetic resonance imaging confirmed the tendon integrity. In the RSA group, scapular notching, acromial fracture, and implant failure were assessed using plain radiographs, and complications were recorded. In both groups, preoperative and postoperative range of motion and functional scores were documented, along with subjective satisfaction and arm use for weight-bearing on the shoulders. For patients followed up for > 5 years, a midterm analysis was performed. Results: The ARCR group included 8 men and 11 women (average age, 58.8 ± 8.0 years). Initially, Patte types 1, 2, and 3 were noted in 9, 8, and 2 patients, respectively, and 4 patients exhibited full-thickness subscapularis tears. Four patients showed supraspinatus retear, and 2 patients showed subscapularis retear. Retear of any rotator cuff was observed in 5 patients (26.3%). Twelve patients were followed up for > 5 years; 11 (91.7%) used their operated arm for weight-bearing and 9 (75.0%) were satisfied. The RSA group included 5 men and 5 women (average age, 74.3 ± 7.9 years). Procedures included RSAs for cuff tear arthropathy (n = 6), osteoarthritis (n = 3), and fracture nonunion (n = 1). No cases of dislocation, prosthesis loosening, or disassociation were observed throughout the follow-up. However, 1 patient required implant removal due to infection, and 4 patients showed stage 1 scapular notching. Five patients were followed up for > 5 years, all of whom expressed satisfaction and used their operated arms for weight-bearing, despite mean forward flexion (107.5° ± 12.6°) and American Shoulder and Elbow Surgeons score (61.5 ± 5.3) being less than reported patient acceptable symptomatic state (110° and 76, respectively). Conclusions Both ARCR and RSA showed promising outcomes in terms of weight-bearing on the operated arm and subjective satisfaction at short- and midterm follow-up. Therefore, neither of these surgeries should be considered contraindicated for patients with weight-bearing shoulder conditions.

Background The decline of physical activity in the elderly due to aging may increase the risk of sarcopenia. Currently, there is a lack of evidence from large natural populations on the relationship between PA and sarcopenia. Objective To explore the relationship between PA and sarcopenia in the elderly aged 60 years and above in 10 provinces (autonomous regions) of China. Methods Data were retrieved from the 2022—2023 round of the China Development and Nutrition Health Impact Cohort. Personal basic information and PA data were collected by questionnaire survey. Skeletal muscle mass was measured by bio-electrical impedance analysis, muscle strength was measured using a grip dynamometer, and physical performance was reflected by 6-meter walk speed. The Asian Working Group for Sarcopenia (AWGS) 2019 criteria were used to diagnose sarcopenia. Light physical activity (LPA) duration, moderate-to-vigorous physical activity (MVPA) duration, and total physical activity volume were calculated. A total of 3326 residents aged ≥60 years with complete data were selected as the survey participants. Multiple logistic regression models and restricted cubic splines (RCS) were used to assess the association between PA duration/volume and sarcopenia. Results In 10 provinces (autonomous regions) of China, the prevalence of sarcopenia in the elderly aged 60 years and above was 5.5% (95%CI: 4.7%, 6.2%). The logistic regression analysis showed that compared with the elderly reporting 0-7.0 h·week⁻¹ in LPA duration, the risk of sarcopenia in the elderly with LPA duration of >14.0-21.0 h·week⁻¹ was reduced by 51% (OR=0.49, 95%CI: 0.26, 0.96). Compared with the elderly with total physical activity ≥15.0 metabolic equivalent of task (MET)-h·week⁻¹, those with <7.5 MET-h·week⁻¹ had a 2.24-fold increased risk of sarcopenia (OR=2.24, 95%CI: 1.17, 4.29). The RCS results found that LPA duration and total physical activity volume each showed a nonlinear dose-response relationship with the risk of sarcopenia (P_overall<0.05, P_non-linear<0.05). Compared with the elderly with an LPA duration of 0 h· week⁻¹, the risk of sarcopenia in the elderly with an LPA duration of 12.6 h· week⁻¹ was the lowest (OR=0.42, 95%CI: 0.21, 0.83). Compared with the elderly with a total physical activity volume of 15.0 MET-h· week⁻¹, the elderly with a total physical activity volume of 46.0 MET-h· week⁻¹ had the lowest risk of sarcopenia (OR=0.57, 95%CI: 0.38, 0.84). There was no statistically significant association between weekly MVPA duration and the risk of sarcopenia (P>0.05). Conclusion Increasing weekly LPA duration and total physical activity volume would help to reduce the risk of sarcopenia.

This study aimed to characterize and identify the non-volatile components in aqueous and ethanolic extracts of the stems and leaves of Rhododendron tomentosum by using sensitive and efficient ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry(UHPLC-Q-TOF-MS) combined with a self-built information database. By comparing with reference compounds, analyzing fragment ion information, searching relevant literature, and using a self-built information database, 118 compounds were identified from the aqueous and ethanolic extracts of R. tomentosum, including 35 flavonoid glycosides, 15 phenolic glycosides, 12 flavonoids, 7 phenolic acids, 7 phenylethanol glycosides, 6 tannins, 6 phospholipids, 5 coumarins, 5 monoterpene glycosides, 6 triterpenes, 3 fatty acids, and 11 other types of compounds. Among them, 102 compounds were reported in R. tomentosum for the first time, and 36 compounds were identified by comparing them with reference compounds. The chemical components in the ethanolic and aqueous extracts of R. tomentosum leaves and stems showed slight differences, with 84 common chemical components accounting for 71.2% of the total 118 compounds. This study systematically characterized and identified the non-volatile chemical components in the ethanolic and aqueous extracts of R. tomentosum for the first time. The findings provide a reference for active ingredient research, quality control, and product development of R. tomentosum.
Rhododendron/chemistry* ; Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Mass Spectrometry/methods* ; Plant Leaves/chemistry*

Drug administration via hollow microneedles (HMN) have the advantages of painlessness, avoidance of first-pass effect, capability of sustained infusion, and no need for professional personnel operation. In addition, HMN can also be applied in the fields of body fluid extraction and biosensors, showing broad application prospects. However, traditional manufacturing technologies cannot meet the demand for low-cost mass production of HMN, limiting its widespread application. This paper reviews the main manufacturing technologies used for HMN in recent years, which include photolithography and etching, laser etching, sputtering and electroplating, micro-molding, three-dimensional (3D) printing and drawing lithography. It further analyzes the characteristics and limitations of existing manufacturing technologies and points out that the combination of various manufacturing technologies can improve production efficiency to a certain extent. In addition, this paper looks forward to the future trends of HMN manufacturing technology and proposes possible directions for its development. In conclusion, it is expected that this review can provide new ideas and references for follow-up research.
Printing, Three-Dimensional ; Needles ; Humans ; Drug Delivery Systems/methods* ; Equipment Design ; Microinjections/methods*