BACKGROUND

Burn injuries remain a significant global public health problem, causing substantial morbidity, mortality, and economic burden, particularly in low- and middle-income countries where nearly 90% of cases occur. Despite the importance of timely and appropriate first aid in reducing complications, community responses to burn injuries in many settings continue to rely on traditional or non-evidence-based practices.

OBJECTIVES

This qualitative phenomenological study explored community-based knowledge and responses related to the causes and first aid of burn injuries.

METHODS

The study involved ten (10) purposively selected informants residing in South Mangga Dua Urban Village, Central Jakarta, Indonesia. Data collection methods included semi-structured interviews, direct observations, and focus group discussions (FGDs). Thematic analysis was used.

RESULTS

Three (3) core domains were identified: (1) community perceptions of burn causes and classifications, (2) indigenous first aid practices used in domestic settings, and (3) sources of knowledge and information pathways related to burn first aid. Participants commonly attributed burns to incidents involving fire, hot liquids, and electrical faults. Their understanding of burn severity was limited to superficial assessments, with little awareness of clinical classifications. First aid responses were largely based on traditional practices such as the application of toothpaste, honey, or aloe vera, while evidencebased practices like using running water were rarely mentioned. Notably, most participants relied on familial teachings and informal community experiences as their primary sources of knowledge, with limited exposure to health professionals or verified media content.

CONCLUSION

Community knowledge is culturally rooted but misaligned with medical standards, potentially leading to unsafe practices. Culturally sensitive health education integrating traditional beliefs and accurate information is essential to improve outcomes in burn injury management.

Wounds And Injuries ; Residence Characteristics ; Public Health ; Mortality ; Insemination, Artificial, Heterologous ; Income ; Financial Stress ; Burns ; Health Education ; Attitude ; First Aid ; Medicine ; Health Communication ; Urban Population

Abstract Introduction: Type 2 diabetes mellitus (T2DM) is a major global health concern characterized by insulin resistance, hyperglycemia, and chronic inflammation. Interest in natural adjunctive therapies has increased, particularly in mangosteen (Garcinia mangostana), which contains xanthone compounds in the peel with potential antidiabetic properties. Methods: This systematic review followed PRISMA 2020 guidelines. Literature searches were conducted using PubMed, Google Scholar, and ClinicalKey up to December 2022 for studies assessing mangosteen peel extract (MPE) or α-mangostin in diabetic human subjects. Eligible studies included randomized controlled and quasi-experimental trials reporting glycemic or metabolic outcomes. Risk of bias was evaluated using the Cochrane RoB tool. The primary result of this study is to evaluate the effects of mangosteen peel extract supplementation on key glycemic outcomes in patients with T2DM, specifically fasting blood glucose (FBG), HOMA-IR, and HbA1c. Results: A total of two studies (n=2) met the inclusion criteria. A randomized controlled pilot trial reported significant improvement in insulin sensitivity (HOMA-IR −53.2% vs −15.2%; p = 0.004) after 26 weeks of standardized mangosteen extract. A small quasi-experimental study reported a significant reduction in FBG following 7 days of mangosteen peel decoction. Discussion: Limited clinical evidence indicates that mangosteen peel extract may improve insulin sensitivity and lower fasting glucose in T2DM. However, the conclusions are limited by the small number of available studies, the short follow-up duration in one trial, and variability in extract preparation. Conclusion: Mangosteen peel extract demonstrates promising glycemic benefits, including improved insulin sensitivity and reduced fasting glucose. However, the available evidence remains limited by small sample sizes, short follow-up periods, and heterogeneity in extract formulations. Larger randomized controlled trials using standardized preparations are required before clinical recommendations can be made.
Garcinia mangostana ; mangosteen peel extract ; &alpha ; -mangostin ; type 2 diabetes mellitus ; insulin resistance ; oxidative stress

BACKGROUND

The COVID-19 pandemic brought insurmountable changes, leading to work demands and resource limitations that placed additional physical and occupational stress.

OBJECTIVES

This study aimed to determine the change in the occurrence and intensity of musculoskeletal discomfort among selected university faculty members. It also determined the association of sociodemographic and anthropometric factors, workplace conditions, and involvement in physical activity with musculoskeletal pain.

METHODS

This is an analytical cross-sectional study conducted from June 2022 to May 2023 that surveyed university faculty members from Metro Manila and Metro Cebu. Outcome measures include sociodemographic data, anthropometric measures of weight, height, body mass index, workplace conditions, exercise participation, and musculoskeletal discomfort using the Cornell Musculoskeletal Discomfort Questionnaire.

RESULTS

Data from 120 participants, mostly female, with an average BMI of 27.78 ± 12.09 kg/m2 and 11.82 ± 10.39 years of teaching experience revealed increased computer usage and reduced teaching hours during the Pandemic lockdown. There was also prevalent musculoskeletal discomfort (MSD), particularly in the neck, shoulder, and upper back. Factors associated with increased MSD were female gender, longer computer use, and pre pandemic MSD history.

CONCLUSION

This study underscores the significance of addressing ergonomic factors and work conditions to mitigate MSD risks among educators during challenging situations.

Human ; Musculoskeletal Pain ; Covid-19 ; Pandemics ; Occupational Stress

INTRODUCTION

This cross-sectional study investigated the relationship between work stress and dysglycemia among healthcare workers engaged in shift work at a level 1 government hospital in Antipolo City, Philippines.

METHODS

Work stress was assessed using the Effort-Reward Imbalance (ERI) Questionnaire, and dysglycemia was measured through a 75g oral glucose tolerance test (OGTT).

RESULTS

A total of 126 healthcare workers aged 20–55 years participated Results showed that 65.1% of participants experienced work stress, with nurses reporting the highest prevalence (43.9%). Dysglycemia was present in 33.3% of participants, predominantly in the form of impaired glucose tolerance. Despite the high prevalence of both work stress and obesity (61.9%), no statistically significant associations were found between work stress and dysglycemia (p = .51), gender and work stress (p = .59), occupation and work stress (p = .059), or obesity and dysglycemia (p = .70).

CONCLUSION

The findings suggest that while work stress is common among healthcare workers, especially nurses, it may not directly predict dysglycemia in relatively young and active populations. However, the long-term metabolic risks associated with chronic occupational stress should not be overlooked. Future longitudinal studies with larger samples are recommended to better assess causality and guide workplace wellness programs.

Human ; Work Stress ; Occupational Stress ; Healthcareworkers ; Health Personnel ; Occupational Health

Prosthesis loosening is the leading cause of postoperative revision in unicompartmental knee arthroplasty (UKA). The deviation of medial and lateral translational installation of the prosthesis during surgery is a common clinical phenomenon and an important factor in increasing the risk of prosthesis loosening. This study established a UKA finite element model and a bone-prosthesis fixation interface micromotion prediction model. The predicted medial contact force and joint motion of the knee joint from a patient-specific lower extremity musculoskeletal multibody dynamics model of UKA were used as boundary conditions. The effects of 9 femoral component medial and lateral translational installation deviations on the Von Mises stress of the proximal tibia, the contact stress, and the micro-motion of the bone prosthesis fixation interface were quantitatively studied. It was found that compared with the neutral position (a/A of 0.492), the lateral translational deviation of the femoral component significantly increased the tibial Von Mises stress and the bone-prosthesis fixation interface contact stress. The maximum Von Mises stress and the maximum contact stress of the fixation interface increased by 14.08% and 143.15%, respectively, when a/A was 0.361. The medial translational deviation of the femoral component significantly increased the bone-prosthesis fixation interface micro-motion. The maximum value of micromotion under the conditions of femoral neutral and medial translation deviation was in the range of 20-50 μm, which is suitable for osseointegration. Therefore, based on considerations such as the micromotion range suitable for osseointegration reported in the literature, the risk of reducing prosthesis loosening, and factors that may induce pain, it is recommended that clinicians control the mounting position of the femoral component during surgery within the safe range of 0-4 mm medial translation deviation.
Humans ; Arthroplasty, Replacement, Knee/methods* ; Finite Element Analysis ; Biomechanical Phenomena ; Knee Prosthesis ; Tibia/surgery* ; Femur/surgery* ; Stress, Mechanical ; Prosthesis Failure ; Knee Joint/surgery* ; Prosthesis Design

This article aims to compare and analyze the biomechanical differences between wing-shaped titanium plates and traditional titanium plates in fixing acetabular anterior column and posterior hemi-transverse (ACPHT) fracture under multiple working conditions using the finite element method. Firstly, four sets of internal fixation models for acetabular ACPHT fractures were established, and the hip joint stress under standing, sitting, forward extension, and abduction conditions was calculated through analysis software. Then, the stress of screws and titanium plates, as well as the stress and displacement of the fracture end face, were analyzed. Research has found that when using wing-shaped titanium plates to fix acetabular ACPHT fractures, the peak stress of screws decreases under all working conditions, while the peak stress of wing-shaped titanium plates decreases under standing and sitting conditions and increases under forward and outward extension conditions. The relative displacement and mean stress of the fracture end face decrease under all working conditions, but the values are higher under forward and outward extension conditions. Wing-shaped titanium plates can reduce the probability of screw fatigue failure when fixing acetabular ACPHT fractures and can bear greater loads under forward and outward extension conditions, improving the mechanical stability of the pelvis. Moreover, the stress on the fracture end surface is more conducive to stimulating fracture healing and promoting bone tissue growth. However, premature forward and outward extension rehabilitation exercises should not be performed.
Titanium ; Bone Plates ; Humans ; Acetabulum/surgery* ; Fracture Fixation, Internal/methods* ; Biomechanical Phenomena ; Finite Element Analysis ; Bone Screws ; Fractures, Bone/surgery* ; Stress, Mechanical ; Working Conditions

Alveolar bone reconstruction simulation is an effective means for quantifying orthodontics, but currently, it is not possible to directly obtain human alveolar bone material models for simulation. This study introduces a prediction method for the equivalent shear modulus of three-dimensional random porous materials, integrating the first-order Ogden hyperelastic model to construct a computed tomography (CT) based porous hyperelastic Ogden model (CT-PHO) for human alveolar bone. Model parameters are derived by combining results from micro-CT, nanoindentation experiments, and uniaxial compression tests. Compared to previous predictive models, the CT-PHO model shows a lower root mean square error (RMSE) under all bone density conditions. Simulation results using the CT-PHO model parameters in uniaxial compression experiments demonstrate more accurate prediction of the mechanical behavior of alveolar bone under compression. Further prediction and validation with different individual human alveolar bone samples yield accurate results, confirming the generality of the CT-PHO model. The study suggests that the CT-PHO model proposed in this paper can estimate the material properties of human alveolar bone and may eventually be used for bone reconstruction simulations to guide clinical treatment.
Humans ; Tomography, X-Ray Computed/methods* ; Porosity ; Alveolar Process/physiology* ; Bone Density ; Computer Simulation ; Elasticity ; X-Ray Microtomography ; Stress, Mechanical ; Finite Element Analysis ; Models, Biological

Extracellular vesicles (EVs), defined as cell-secreted nanoscale vesicles that carry bioactive molecules, have emerged as a promising therapeutic strategy in tumor and tissue regeneration. Their potential in repairing intervertebral disc degeneration (IDD) through multidimensional regulatory mechanisms is a rapidly advancing field of research. This paper provided an overview of the mechanisms of EVs in IDD repair, thoroughly reviewed recent literature on EVs for IDD, domestically and internationally, and summarized their therapeutic mechanisms. In IDD repair, EVs could act through different mechanisms at the molecular, cellular, and tissue levels. At the molecular level, EVs could treat IDD by inhibiting inflammatory reactions, suppressing oxidative stress, and regulating the synthesis and decomposition of extracellular matrix. At the cellular level, EVs could treat IDD by inhibiting cellular pyroptosis, ferroptosis, and apoptosis and promoting cell proliferation and differentiation. At the tissue level, EVs could treat IDD by inhibiting neovascularization. EVs have a strong potential for clinical application in the treatment of IDD and deserve more profound study.
Extracellular Vesicles/physiology* ; Humans ; Intervertebral Disc Degeneration/therapy* ; Apoptosis ; Cell Proliferation ; Oxidative Stress ; Cell Differentiation ; Extracellular Matrix/metabolism* ; Animals ; Pyroptosis

In order to investigate the mechanical response of lumbar vertebrae during gait cycle in adolescents with idiopathic scoliosis (AIS), the present study was based on computed tomography (CT) data of AIS patients to construct model of the left support phase (ML) and model of the right support phase (MR), respectively. Firstly, material properties, boundary conditions and load loading were set to simulate the lumbar vertebra-pelvis model. Then, the difference of stress and displacement in the lumbar spine between ML and MR was compared based on the stress and displacement cloud map. The results showed that in ML, the lumbar stress was mostly distributed on the convex side, while in MR, it was mostly distributed on the concave side. The stress of the two types of stress mainly gathered near the vertebral arch plate, and the stress of the vertebral arch plate was transmitted to the vertebral body through the pedicle with the progress of gait. The average stress of the intervertebral tissue in MR was greater than that in ML, and the difference of stress on the convex and convex side was greater. The displacement of lumbar vertebrae in ML decreased gradually from L1 to L5. The opposite is true in MR. In conclusion, this study can accurately quantify the stress on the lumbar spine during gait, and may provide guidance for brace design and clinical decision making.
Humans ; Lumbar Vertebrae/diagnostic imaging* ; Scoliosis/diagnostic imaging* ; Adolescent ; Gait/physiology* ; Biomechanical Phenomena ; Tomography, X-Ray Computed ; Stress, Mechanical ; Female ; Male

Although metal blocks have been widely used for reconstructing uncontained tibial bone defects, the influence of their elastic modulus on the stability of tibial prosthesis fixation remains unclear. Based on this, a finite element model incorporating constrained condylar knee (CCK) prosthesis, tibia, and metal block was established. Considering the influence of the post-restraint structure of the prosthesis, the effects of variations in the elastic modulus of the block on the von Mises stress distribution in the tibia and the block, as well as on the micromotion at the bone-prosthesis fixation interface, were investigated. Results demonstrated that collision between the insert post and femoral prosthesis during tibial internal rotation increased tibial von Mises stress, significantly influencing the prediction of block elastic modulus variation. A decrease in the elastic modulus of the metal block resulted in increased von Mises stress in the proximal tibia, significantly reduced von Mises stress in the distal tibia, decreased von Mises stress of the block, and increased micromotion at the bone-prosthesis fixation interface. When the elastic modulus of the metal block fell below that of bone cement, inadequate block support substantially increased the risk of stress shielding in the distal tibia and fixation interface loosening. Therefore, this study recommends that biomechanical investigations of CCK prostheses must consider the post-constraint effect, and the elastic modulus of metal blocks for bone reconstruction should not be lower than 3 600 MPa.
Knee Prosthesis ; Humans ; Finite Element Analysis ; Tibia/surgery* ; Elastic Modulus ; Arthroplasty, Replacement, Knee/methods* ; Stress, Mechanical ; Metals ; Prosthesis Design ; Knee Joint/surgery* ; Biomechanical Phenomena