OBJECTIVE: To evaluate the short-term effectiveness of Ilizarov technique combined with steel needle internal fixation in treating Charcot neuroarthropathy (CN) of the foot and ankle. METHODS: Between June 2020 and December 2023, 12 patients with Eichenholtz stage Ⅲ CN of the foot and ankle were treated with Ilizarov technique and steel needle internal fixation. There were 9 males and 3 females with an average age of 48.6 years (range, 19-66 years). The disease duration ranged from 1 to 16 months (mean, 6.8 months). Ankle joint involvement predominated in 7 cases, while midfoot involvement occurred in 5 cases; 3 cases presented with skin ulceration and soft tissue infection. Preoperative American Orthopedic Foot and Ankle Society (AOFAS) score was 31.2±9.0, 36-Item Short-Form Health Survey (SF-36)-Physical Component Summary (PCS) score was 32.6±6.8, and Mental Component Summary (MCS) score was 47.8±8.4. Postoperative assessments included wound healing, regular X-ray film/CT evaluations of fusion status, and effectiveness via AOFAS and SF-36-PCS, MCS scores. RESULTS: All operations were successfully completed without neurovascular complication. Two patients experienced delayed wound healing requiring intervention, and the others achieved primary healing. All patients were followed up 15-43 months (mean, 23.3 months). Imaging confirmed successful joint fusion within 13-21 weeks (mean, 16.8 weeks). At last follow-up, the AOFAS score was 72.5±6.4, and the SF-36-PCS and MCS scores were 63.2±8.4 and 76.7±5.3, respectively, all of which improved compared to preoperative levels, with significant differences ( P<0.05). CONCLUSION Ilizarov technique combined with steel needle internal fixation effectively restores walking function and achieves satisfactory short-term effectiveness in CN of the foot and ankle.
Humans ; Middle Aged ; Male ; Female ; Adult ; Ilizarov Technique ; Arthropathy, Neurogenic/surgery* ; Aged ; Ankle Joint/surgery* ; Treatment Outcome ; Needles ; Fracture Fixation, Internal/instrumentation* ; Steel ; Young Adult ; Foot Joints/surgery*

OBJECTIVE: To explore the effectiveness of additional anti-rotation steel plate assisted intramedullary nail technology in treatment of aseptic femoral non-union patients. METHODS: A retrospective analysis was conducted on 21 patients with aseptic femoral non-union who admitted between September 2020 and October 2024 and treated with additional anti-rotation steel plate assisted intramedullary nail technology. There were 17 males and 4 females, aged 25-67 years (mean, 44 years). There were 19 cases of femoral anterograde intramedullary nail fixation, 1 case of femoral retrograde intramedullary nail fixation, and 1 case of steel plate fixation with fatigue fracture. There were 9 cases of hypertrophic non-union and 12 cases of atrophic non-union. All patients had varying degrees of fracture end atrophy/sclerosis. Among them, 20 patients who were fixed with intramedullary nails underwent removal of soft tissue and hardened bone at the fracture end, and cortical treatment resulted in the appearance of "chili sign" at the fracture end. Iliac bone grafting and anti-rotation steel plate fixation were performed. One patient with steel plate fixation was removed the steel palte and fixed with a retrograde intramedullary nail, while the hardened bone at the fracture end was removed, iliac bone grafting and anti-rotation steel plate fixation were performed. Postoperative follow-up observation included the incision healing, maximum knee flexion range of motion, bone healing, length of lower limbs, and subjective satisfaction. The lower extremity functional scale (LEFS) score was used to evaluate the lower limb function. RESULTS: All incisions healed by first intention. All patients were followed up 7-26 months (mean, 15.5 months). At last follow-up, the femoral fracture healed with the obvious callus formation at the fracture end; the maximum knee flexion range of motion was 95°-127° (mean, 112.67°). The LEFS score increased from 29.9±6.7 before operation to 75.9±3.0 at last follow-up, and the difference was significant (t=-29.622, P<0.001). Except for 1 patient who underwent intramedullary nail dynamic treatment before operation and had a lower limb shortening of about 0.9 cm, the other patients had bilateral lower limbs of equal length. All patients had no postoperative infections, mal-union of fractures, deep vein thrombosis, joint stiffness, or other complications. CONCLUSION The use of additional anti-rotation steel plate assisted intramedullary nail technology in the treatment of aseptic femoral non-union not only overcomes the drawbacks of insufficient stability at the fracture end of intramedullary nails, but also overcomes the shortcomings of biased fixation with steel plates. It has the advantages of minimal trauma, effective maintenance of fracture stability, and ideal postoperative functional recovery, making it an effective treatment for aseptic femoral non-union.
Humans ; Male ; Fracture Fixation, Intramedullary/instrumentation* ; Female ; Bone Plates ; Middle Aged ; Adult ; Femoral Fractures/surgery* ; Retrospective Studies ; Bone Nails ; Aged ; Fractures, Ununited/surgery* ; Treatment Outcome ; Bone Transplantation/methods* ; Steel ; Fracture Healing

OBJECTIVE: To review the application progress of customized steel plates in osteotomy and orthopedic treatment for knee osteoarthritis (KOA), and provide reference for orthopedic surgeons and researchers. METHODS: Extensive review of the literature on customized steel plates for osteotomies and knee-preserving surgeries for KOA, 2015-2025, with an overview of the principles of customized steel plate design, clinical applications, and future directions, describing their advantages and shortcomings. RESULTS: Customized steel plates have demonstrated many advantages in osteotomy and orthopedic treatment of KOA, which not only enhance surgical outcomes and optimize mechanical properties, but also reduce the incidence of postoperative complications. However, high cost, long manufacturing period, and selection of patient indications are still important factors restricting their use. CONCLUSION Customized steel plates show promising potential in treating KOA. Not only do they reduce surgical duration and enhance postoperative healing outcomes, but they also effectively lower the incidence of postoperative complications, thereby improving patients' quality of life.
Humans ; Osteoarthritis, Knee/surgery* ; Osteotomy/methods* ; Bone Plates ; Postoperative Complications/epidemiology* ; Steel ; Quality of Life ; Treatment Outcome ; Knee Joint/surgery*

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

OBJECTIVE: To propose a sensitivity test method for geometric correction position deviation of cone-beam CT systems. METHODS: We proposed the definition of center deviation and its derivation. We analyzed the influence of the variation of the three-dimensional spatial center of the steel ball point, the projection center and the size of the steel ball point on the deviation of geometric parameters and the reconstructed image results by calculating the geometric correction parameters based on the Noo analytical method using the FDK reconstruction algorithm for image reconstruction. RESULTS: The radius of the steel ball point was within 3 mm. The deviation of the center of the calibration parameter was within the order of magnitude and negligible. A 10% Gaussian perturbation of a single pixel in the 3D spatial coordinates of the steel ball point produced a deviation of about 3 pixel sizes, while the same Gaussian perturbation of the 2D projection coordinates of the steel ball point produced a deviation of about 2 pixel sizes. CONCLUSION The geometric correction is more sensitive to the deviation generated by the three-dimensional spatial coordinates of the steel ball point with limited sensitivity to the deviation generated by the two-dimensional projection coordinates of the steel ball point. The deviation sensitivity of a small diameter steel ball point can be ignored.
Algorithms ; Calibration ; Cone-Beam Computed Tomography ; Steel

OBJECTIVE: To analyze the effect of lag screw and support plate through axillary approach for the treatment of Ideberg typeⅡscapular pelvis fracture. METHODS: From January 2016 to June 2021, 26 patients with Ideberg typeⅡglenoid fractures were treated with trans-axillary lag screw combined with supporting plate, including 15 males and 11 females. The age ranged from 21 to 75 years, with an average of (43.12±6.56) years old. The Constant-Murley Shoulder joint Scale and University of California at Los Angeles (UCLA) score were used to evaluate the function and clinical efficacy of shoulder joint. RESULTS: All patients were followed up, and the duration ranged from 19 to 42 months, with an average of (30.6±10.5) months. One year after surgery, the Constant-Murley score increased from preoperative 34.9±2.5(ranged, from 28 to 47) to 87.2±6.8(ranged, from 70 to 95). The UCLA score improved from preoperative 17.9±1.7(9 to 25) to 33.1±2.3(29 to 35). Seventeen patients got an excellent result, with 7 good, and 2 fair. None of the patients had infection, screw, and plate loosening, fracture, and other complications after surgery. Two patients had different degrees of Chronic pain in the shoulder during the follow-up period. CONCLUSION The treatment of Ideberg typeⅡscapular glenoid fractures through axillary approach with lag screws and supporting steel plates has the advantages of convenient exposure, direct visual restoration of the normal anatomical shape of the scapular glenoid, selection of suitable positions for screw and steel plate placement, achieving better treatment results, and fewer complications. It is an effective and reliable surgical method.
Female ; Male ; Humans ; Young Adult ; Adult ; Middle Aged ; Aged ; Scapula ; Bone Plates ; Bone Screws ; Fractures, Bone ; Steel ; Pelvis

The interventional therapy of vascular stent implantation is a popular treatment method for cardiovascular stenosis and blockage. However, traditional stent manufacturing methods such as laser cutting are complex and cannot easily manufacture complex structures such as bifurcated stents, while three-dimensional (3D) printing technology provides a new method for manufacturing stents with complex structure and personalized designs. In this paper, a cardiovascular stent was designed, and printed using selective laser melting technology and 316L stainless steel powder of 0-10 µm size. Electrolytic polishing was performed to improve the surface quality of the printed vascular stent, and the expansion behavior of the polished stent was assessed by balloon inflation. The results showed that the newly designed cardiovascular stent could be manufactured by 3D printing technology. Electrolytic polishing removed the attached powder and reduced the surface roughness Ra from 1.36 µm to 0.82 µm. The axial shortening rate of the polished bracket was 4.23% when the outside diameter was expanded from 2.42 mm to 3.63 mm under the pressure of the balloon, and the radial rebound rate was 2.48% after unloading. The radial force of polished stent was 8.32 N. The 3D printed vascular stent can remove the surface powder through electrolytic polishing to improve the surface quality, and show good dilatation performance and radial support performance, which provides a reference for the practical application of 3D printed vascular stent.
Humans ; Stainless Steel ; Powders ; Cardiovascular System ; Constriction, Pathologic

OBJECTIVE: To develop a new type of puncture needle for indwelling needle, which can overcome the performance problems of the existing puncture needle, reduce producing cost, and enhance clinical operability. METHODS: In this design, solid needle thread is used to replace the traditional hollow pipe thread, three cutting edges are used to replace the existing two cutting edges, and the shaft edge form (the needle tip is on the needle thread's axis) is used to replace the original back blade or edge blade; the slot on the side of the solid core wire is used to replace the hollow and side hole on the traditional pipe. Finally, a new solid core puncture needle is formed by a section of solid core steel wire with a spiral groove, the cross-section of which is a circular slotted needle with a triangular shape at one end. Through the comparative analysis of stiffness mutation and puncture force in the experiment, the characteristics and advantages of new puncture needle are reflected. RESULTS: The new solid core needle can meet the need of puncture in the course of treatment, and can avoid the potential risk caused by the rigidity mutation of the needle used in the traditional indwelling needle, at the same time, it also has the space to reduce the demand of needle diameter, that means it has the potential to develop smaller needle products. CONCLUSIONS The new type of trocar puncture needle, from hollow to solid core, can not only meet the basic requirements of puncture and observation of blood return, but also can avoid the risk of traditional puncture needle due to stiffness mutation, the utility model also has the advantages of better performance (less puncture force) and larger expansion space.
Needles ; Punctures ; Steel ; Surgical Instruments

Objective: To analyzes the various occupational health investment and occupational health output of a steel enterprise, and propose a reasonable occupational health investment plan for this enterprise. Methods: In march 2016, various occupational health input and output data of various branches of an iron and steel company in 2015 were collected, and the efficiency of occupational health inputs and outputs of each branch was evaluated using data envelopment analysis (DEA) , and the branches with non-optimal efficiency were adjusted to propose a reasonable occupational health investment plan. Results: Among the branch plants investigated by this steel company, the occupational health input-output efficiency values of ironmaking north plant, power plant, hot rolling plant and stainless steel plant were 1, while the occupational health input-output efficiency of gas making plant, cold rolling plant, metallurgical furnace charge plant, coking plant, ironmaking south plant and long product plant were not the best, and the cold rolling plant has the lowest efficiency value of 0.759. For the cold rolling plant, only the parameters of acid rolling plant satisfy α=1 and s(-)=0, s(+)=0, while the remaining four workshops do not meet. After adjusting the inputs of each part according to the parameters, the occupational health output of the remaining four workshops can reach 1.7044, 2.0238, 1.3152 and 1.2136 times of the current workshop, respectively. Adjustment plans for other branch factories with unreasonable investment structures are also presented in the corresponding tables. Conclusion: The occupational health investment structure of the ironmaking south plant and other branches in this steel enterprise is unreasonable, and the adjustment using data envelopment analysis can maximize the benefits of its occupational health output.
Financial Management ; Iron ; Metallurgy ; Occupational Health ; Steel

Objective: To analyze the change trend of underground dust concentration, the incidence and survival status of pneumoconiosis patients, and provide reference for improving the working environment of dust-exposed workers and the prevention and treatment of pneumoconiosis patients in the future. Methods: In February 2020, a retrospective investigation was conducted on the dust data of underground mining operations in a steel enterprise in Jiangsu Province from 1991 to 2019, and the case data of patients diagnosed with pneumoconiosis from 1956 to 2019 were collected. The time trends of the number of pneumoconiosis patients and dust concentration, the stage of pneumoconiosis and survival status of patients were analyzed. Results: From 1956 to 2019, a total of 241 patients with pneumoconiosis were diagnosed in the steel enterprise. From 1991 to 2019, the annual average dust concentration in the mine showed a downward trend as a whole. Compared with the transportation platform (14.28%, 1447/10132) , the average dust concentration exceeding rate of the mining platform (43.68%, 8415/19263) was significantly higher (χ(2)=2674.84, P<0.01) . The average age of pneumoconiosis patients was (73.54±10.42) years old, and the average working age of dust exposure was (21.41±8.68) years, of which 85 cases (35.27%) survived and 156 cases (64.73%) died. The main type of pneumoconiosis was silicosis (90.46%, 218/241) , and the main stage of pneumoconiosis was the stage I (96.68%, 233/241) ; The higher the stage of pneumoconiosis, the younger the diagnosis age (P<0.01) . The average survival time of patients was (27.264±1.982) years, and the median survival time was 28 years. The cumulative survival rates of patients with pneumoconiosis in different diagnosis time periods were significantly different (χ(2)=35.57, P<0.01) . Conclusion: The improved dust-proof measures have a significant effect on reducing the concentration of underground dust. We need to focus on the dust control of underground mining platforms and the treatment of patients with stage Ⅲ pneumoconiosis.
Humans ; Middle Aged ; Aged ; Aged, 80 and over ; Child ; Adolescent ; Young Adult ; Adult ; Incidence ; Coal Mining ; Steel ; Retrospective Studies ; Pneumoconiosis/diagnosis* ; Dust ; Occupational Exposure/adverse effects*