OBJECTIVE: To analyze the clinical efficacy of manual reduction combined with 3D printing small splint external fixation and synchronous manual reduction combined with traditional small splint external fixation in the treatment of humeral shaft. METHODS: Between January 2021 and December 2022, 40 patients with humeral shaft fractures were treated with 3D printing small splints and traditional small splints. They were divided into 3D group and traditional group according to different fixation methods. Among them, there were 15 males and 5 females in the 3D group, aged from 20 to 52 years old with an average of (36.3±15.6) years old. In the traditional group there were 17 males and 3 females, aged from16 to 51 years old with an average of (32.9±17.2) years old. The occurrence of complications, duration of fracture healing, rate of fracture healing, subjective evaluation scores for brace comfort at 1 week and 4 weeks, as well as the Constant-Murley shoulder function score and Mayo elbow function score at 8 weeks and 16 weeks were compared between the two groups. RESULTS: All patients were followed up for 16 weeks. The 3D group did not experience any complications, while there were two cases of complications in the traditional group. However, this difference was not found to be statistically significant (χ²=2.105, P=0.146). The fracture healing time of the 3D group (90.1±4.5) days was significantly shorter compared to that of the traditional group (93.3±3.8) days (P<0.05). The subjective evaluation scores for brace comfort in the 3D group (53.7±2.3) points and (62.8±1.1) points were significantly higher than those in the traditional group (45.6±2.4) points and (52.3±1.4) points at 1 and 4 weeks after reduction (P<0.05). After 8 weeks of reduction, the Constant-Murley shoulder function score in the 3D group was(68.1±5.3) points, which demonstrated a statistically significant improvement compared to the traditional group(54.3±4.9) points (P<0.05). However, at 16 weeks post-reduction, there were no significant differences observed between the two groups (P>0.05). The Mayo elbow function score of the 3D group (84.1±7.5) points was significantly superior to that of the traditional group (79.5±6.8) points at 8 weeks post-reduction (P<0.05). However, there was no statistically significant difference between the two groups at 16 weeks post-reduction (P>0.05). CONCLUSION For humeral shaft fractures with conservative treatment indications, manual reduction combined with 3D printed small splints is a good choice for treatment. The patient's comfort level is higher, which can not only reduce the occurrence of complications, but also improve the fracture healing rate and joint function to a certain extent, and improve the patient's quality of life.
Humans ; Female ; Male ; Adult ; Middle Aged ; Humeral Fractures/physiopathology* ; Printing, Three-Dimensional ; Splints ; Adolescent ; Young Adult ; Fracture Healing

OBJECTIVE: To evaluate the clinical efficacy of self-made anatomical tower-shaped pads combined with splint plaster fixation in the treatment of unstable 2nd to 5th metacarpal fractures and to provide a reference for clinical practice. METHODS: A retrospective analysis was conducted on 98 patients with unstable 2nd to 5th metacarpal fractures treated with self-made anatomical tower-shaped pads combined with splint plaster fixation between January 2019 and December 2022. There were 74 males and 24 females, aged from 19 to 63 years old with an average of (41.58±7.23) years old. The total active movement (TAM) score was used to evaluate the metacarpophalangeal joint function. Complications and fracture healing time were recorded. RESULTS: All patients were followed up for a period ranging from 1 to 5 months, with an average duration of (3.45±1.03) months. Among the 98 patients, anatomical alignment was achieved in 75 patients, with 68 patients still maintaining anatomical alignment after fixation removal. Functional alignment was achieved in 23 patients, with 20 patients maintaining functional alignment even after fixation removal. There were 10 patients with displacement after reduction. The average fracture healing time was (5.78±1.14) weeks, and the fracture healed well without any angular or rotational deformities. TAM score was utilized to assess the hand function of patients 3 months post-treatment. The extension range of motion (10.72±1.35)° and flexion range of motion (83.19±4.08)° of the metacarpophalangeal joint were significantly higher than the pre-treatment values of (8.25±0.68)° and (70.35±2.36)°, respectively. These differences were statistically significant (P<0.05). TAM outcomes were excellent in 92 cases, good in 5, fair in 1, and poor in none. CONCLUSION The implementation of self-made anatomical tower-shaped pad combined with splint plaster fixation is effective for the conservative management of unstable 2nd to 5th metacarpal fractures.
Humans ; Male ; Female ; Adult ; Middle Aged ; Metacarpal Bones/surgery* ; Splints ; Retrospective Studies ; Fractures, Bone/therapy* ; Casts, Surgical ; Young Adult ; Fracture Fixation, Internal/instrumentation*

OBJECTIVES: Magnetic resonance imaging (MRI) was used to study the efficacy of modified anterior splint (MAS) combined with anterior repositioning splint (ARS) in maintaining the normal disk-condyle relationship. METHODS: We obtained clinical and imaging data of 10 patients with acute anterior disk displacement without reduction (ADDwoR) of the temporomandibular joint undergoing successful mandibular manipulation in the Affiliated Stomatological Hospital, Nanchang University from January to June 2024. The MAS and ARS were used for subsequent treatment. Maximum active mouth opening (MMO) and visual analogue score (VAS) were recorded before treatment and 2 weeks, 1 month, and 3 months after treatment. The changes in the disk-condyle relationship, disk-condyle angle, joint effusion, and double contour sign before and after treatment were analyzed through MRI. RESULTS: Three months after treatment, the MMO increased from 28.90 mm to 46.85 mm, VAS decreased from 4.68 to 0.61, and the disk-condyle angle decreased from 58.84° to 25.99°. MRI analysis found that 6 patients showed normal disk-condyle relationship, 2 patients exhibited displacement with reduction, and 2 patients exhibited ADDwoR. The disk-condyle angle was 58.84° before treatment and 25.99° after treatment. CONCLUSIONS The MAS combined with ARS could further stabilize the coordinated disk-condyle relationship and reduce the recurrence rate.
Humans ; Male ; Magnetic Resonance Imaging ; Female ; Adult ; Temporomandibular Joint Disorders/diagnostic imaging* ; Splints ; Middle Aged ; Mandible ; Temporomandibular Joint Disc ; Occlusal Splints ; Temporomandibular Joint ; Young Adult ; Joint Dislocations/therapy*

Objective To explore the short-term efficacy of digitally-assisted traditional Chinese medicine manual reduction combined with 3D printed splint in the treatment of AO type-A distal radius fractures, and explore the quantification of traditional Chinese medicine manual reduction and personalized improvement of splinting. Methods The clinical data of 50 patients with AO type-A distal radius fractures, who received treatment at the outpatient department of Cangzhou Integrated Traditional Chinese and Western Medicine Hospital in Hebei Province, were retrospective analyzed. The patient cohort included 22 females and 28 males, with ages ranging from 25 to 75 years old. Among them, 27 cases presented with distal radius fractures on the left side, and 24 cases on the right side. The patients were categorized into two groups: treatment group (n=25) and control group(n=25). There were 13 males and 12 females in the treatment group, with an average age of (56.2±5.5) years old. Treatment approach for this group involved several steps. Initially, Mimics Research software was used to conduct comprehensive analysis of complete CT data from the affected limb, resulting in the creation of a three-dimensional model. Subsequently, 3D models of the bones and skin contours, stored as STL format files, were imported into the Materialise Magics 23.0 software for model processing and repair. This facilitated the simulation of reduction and recording of displacement data, effectively generating a "digital prescription" to guide and quantify traditional Chinese medicine manipulation procedures. Finally, a personalized 3D printed splint was applied for fixation treatment. There were 15 males and 10 females in the control group, with an average age of (53.32±5.28) years old. These patients were treated with manualreduction combined with traditional splinting. The clinical efficacy of the two groups was assessed in terms of fracture reduction quality, fracture healing time, Gartland-Werley wrist joint score and X-ray parameters (palminclination angle, ulnar deviation angle, radius height) at 6 weeks post-operatively. Results The treatment group exhibited a shorter duration for achieving clinical healing compared to the control group (P<0.05). Six weeks post-operatively, the treatment group demonstrated higher wrist joint function scores, and a higher proportion of excellent and good outcomes than the control group(P<0.05). The treatment group was superior to the control group in terms of imaging parameters 6 weeks post-operatively (P<0.05). Conclusion By quantifying skin contours through digital simulation prescription reduction, a personalized 3D printed splint is developed to effectively stabilize fractures, enhancing localized fixation while ensuring greater adherence, stability, and comfort. This innovative approach offers personalized treatment for AO type-A distal radius fractures and presents a novel, precise treatment strategy for consideration.
Adult ; Aged ; Female ; Humans ; Male ; Middle Aged ; East Asian People ; Printing, Three-Dimensional ; Retrospective Studies ; Splints ; Wrist Fractures/therapy* ; Medicine, Chinese Traditional/methods* ; Therapy, Computer-Assisted/methods* ; Manipulation, Orthopedic/methods* ; Tomography, X-Ray Computed ; Precision Medicine/methods*

OBJECTIVE: To observe clinical effect of percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation in treating moderate hallux valgus. METHODS: Totally 23 patients with moderate hallux valgus were treated with percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation from August 2019 to January 2021, and 1 patient was loss to follow-up, and finally 22 patients(30 feet) were included, 4 males (6 feet) and 18 females(24 feet), aged from 27 to 66 years old with an average of(50.59±11.95) years old. Hallux valgus angle (HVA), intermetatarsal angle (IMA), metatarsal span (the distance between the first and the fifth metatarsal bones), changed of soft tissue width, American Orthopaedic Foot and Ankle Society(AOFAS) score, and Visual Analogue Scale (VAS) were collected and compared before operation and 6 months after operation. RESULTS: Twenty-two patients were followed up from 5.7 to 6.4 months with an average of (6.13±0.85) months. The first metatarsal osteotomy of patients were obtained bone union, and deformity of the toes was corrected. Complications such as avascular necrosis of metatarsal head and transfer metatarsalgia were not occurred. Postoperative HVA, IMA, metatarsal span, soft tissue width, VAS, AOFAS score at 6 months were significantly improved compared with pre-operation (P<0.01). According to AOFAS score at 6 months after operation, 10 feet were excellent, 18 good and 2 poor. Two feet with poor were excellent after prolonged 8-shaped bandage and hallux valgus splint fixation time. CONCLUSION Percutaneous minimally invasive osteotomy with 8-shaped bandage and hallux valgus splint fixation for the treatment of moderate hallux valgus could better correct deformity of hallux valgus, relieve foot symptoms, good recovery of postoperative function, and has a significant clinical efficacy.
Male ; Female ; Humans ; Adult ; Middle Aged ; Aged ; Hallux Valgus/diagnostic imaging* ; Splints ; Radiography ; Bunion ; Treatment Outcome ; Metatarsal Bones/surgery* ; Osteotomy ; Bandages

Objective: MRI images were used to study the efficacy of anterior repositioning splint (ARS) in the treatment of different types of disc displacement with reduction (DDWR) in temporomandibular joint. Methods: From September 2020 to December 2021, 26 patients with DDWR were enrolled in the Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Zhengzhou University. There were 5 males and 21 females with an average age of (20.8±5.8) years. ARS was used for 3-6 months. The changes of joint clicking, opening type and joint pain before and after treatment were compared. The changes of disc position, disc-condyle angle and condylar bone mass before and after treatment were compared by MRI. Paired t-test was performed on the disc-condyle angle before and after treatment, Fisher's exact test was performed on the change of disk position, and other count data were expressed as rate (%). Results: After ARS treatment, the effective rates of joint clicking,abnormal opening, joint pain and disc displacement were 97%(35/36), 14/18, 7/9 and 95%(36/38). MRI analysis found that there was a significant difference between the disc position before and after treatment (P<0.001), MRI analysis showed that the anterior disc displacement (48%, 25/52) and the anterolateral disc displacement (17%, 9/52) were the most common before treatment. In contrast, the normal superior disc (75%, 39/52) and the anterior disc displacement (17%, 9/52) were the most common after treatment, no significant changes were seen after treatment in the anteromedial disc displacement. The disc-condylar angle was (36.09±19.02) ° before ARS treatment and (3.94±10.12) ° after ARS treatment(t=9.23, P<0.001). After treatment, 46% (12/16) of the patients showed new bone formation, and the height of the condyle recovered. Conclusions: The clinical efficacy of ARS in the treatment of anterior disc displacement and anterolateral displacement of temporomandibular joint is remarkable, which can restore the disc-condylar relationship of most patients with indications.
Adolescent ; Adult ; Arthralgia ; Female ; Humans ; Joint Dislocations/therapy* ; Magnetic Resonance Imaging ; Male ; Splints ; Temporomandibular Joint ; Temporomandibular Joint Disc/diagnostic imaging* ; Young Adult

Stabilization with splint is an important surgical technology in traumatic dental injuries of permanent tooth. In order to standardize the clinical application of the technique and to improve the therapeutic effects of traumatic injured teeth, the Society of Stomatological Emergency, Chinese Stomatological Association organized relevant professional experts and put forward an expert consensus on the basis of considerable discussion. The contents of the present expert consensus covered indications for tooth fixation, material selection of splints and operation methods, applying to the treatment of tooth loosening, tooth displacement and tooth avulsion replantation caused by traumatic injuries. It is also suitable for preoperative and prognosis evaluations of traumatic injured teeth before tooth fixation.
Consensus ; Dentition, Permanent ; Humans ; Splints ; Tooth Avulsion/therapy* ; Tooth Injuries/therapy* ; Tooth Replantation/methods*

OBJECTIVE: According to 73 patients with middle clavicle fracture treated conservatively, a new classification of middle clavicle fracture was proposed, and the clinical effect of plastic splint in the treatment of middle clavicle fracture was observed. METHODS: Total 73 patients with middle clavicle fracture treated with plastic splint from September 2018 to August 2020 were analyzed retrospectively. All the patients were divided into 4 types according to the degree of fracture displacement. There were 16 cases of typeⅠ, including 7 males and 9 females, ranging in age from 18 to 37 years old, with a mean of (28.6±7.8) years old;12 cases of mild disease, 3 cases of moderate disease and 1 case of severe disease. There were 16 cases of type Ⅱ, including 6 males and 10 females, ranging in age from 25 to 49 years old, with a mean of (37.3±9.4) years old;5 cases of mild disease, 8 cases of moderate disease and 3 cases of severe disease. There were 7 cases of type Ⅲ, including 4 males and 3 females, ranging in age from 33 to 57 years old;2 cases of mild disease, 3 cases of moderate disease and 2 cases of severe disease. There were 34 cases of type Ⅳ, including 16 males and 18 females, ranging in age from 48 to 82 years old, with a mean of(66.4±14.9) years old;7 cases of mild disease, 17 cases of moderate disease and 10 cases of severe disease. All patients received plastic splint external fixation for 4 weeks. Visual analgue scale (VAS) and Constant-Murley shoulder scores before treatment and 1, 3 and 9 months after treatment were observed and recorded to evaluate the change of pain degree and shoulder function recovery before and after treatment. The patients' satisfaction with the appearance after treatment was recorded at the latest follow-up. The X-ray findings at the latest follow-up were used to judge whether the patient had fracture nonunion. And according to the fracture healing time and imaging findings, the excellent and good rate of clinical curative effect in patients with different types was obtained. RESULTS: All patients were followed up, and the duration ranged from 9 to 11 months, with a mean of (9.8±0.7) months. The VAS scores of typeⅠ, typeⅡand type Ⅳ before treatment were 2.88±0.83, 3.67±0.80 and 6.92±1.71 respectively, which were decreased to 0.54±0.19, 0.77±0.25 and 1.18±0.17 respectively after 9 months of treatment. The Constant-Murley shoulder scores of typeⅠ, typeⅡand type Ⅳ were 65.81±2.09, 63.50±2.22 and 47.93±2.91 respectively before treatment, and increased to 88.56±2.11, 85.12±2.23 and 71.25±2.16 respectively after 9 months of treatment. Five patients were not satisfied with the appearance after treatment;6 patients had no obvious continuous callus passing through after 9 months of treatment, which was fracture nonunion. CONCLUSION The classification of middle clavicle fracture is more appropriate to the clinic, which has a certain clinical guiding significance for the selection of treatment methods and prognosis of middle clavicle fracture. Plastic splint is effective in the treatment of middle clavicle fracture without obvious displacement and overlapping displacement, and the incidence of complications is low. It can be popularized in clinic.
Adolescent ; Adult ; Aged ; Aged, 80 and over ; Bone Plates ; Clavicle/diagnostic imaging* ; Female ; Fracture Fixation, Internal/methods* ; Humans ; Male ; Middle Aged ; Plastics ; Retrospective Studies ; Splints ; Young Adult

OBJECTIVE: To explore the clinical effect of manual reduction combined with homemade splint external fixation in the treatment of metacarpal fractures. METHODS: A retrospective analysis was performed in 126 patients with metacarpal fracture treated by manual reduction and homemade splint external fixation in the emergency department of our hospital from January 2018 to December 2018, including 102 male, 24 female, ranging in age from 9 to 73 year old, with an average of (33.2±14.3)years old. During the treatment, the X-ray was re-examined regularly, and the external fixation was continued or adjusted according to the X-ray situation. The X-ray showed callus growth. After the fracture was stable, the external fixation was removed to continue functional exercise. The TAM scoring standardwas used to evaluate the hand function, and the fracture healing and complications were summarized. RESULTS: Of the 126 patients, 6 patients were treated with operation because of fracture displacement during the treatment. The other 120 patients were treated with this method and all of them got bony healing. The healing time was (6.3±1.8) weeks. The follow up time ranged from 2 to 12 months, with a mean of (4.4±2.2) months. At the latest follow up, TAM score was used to evaluate the hand function:excellent in 105 cases, good in 13 cases, fair in 2 cases and poor in 0 case. Shortening deformity was found in 7 cases and angulation deformity in 3 cases. CONCLUSION Manual reduction combined with homemade splint external fixation in the treatment of metacarpal fractures can achieve good clinical results. Homemade splint is easy to obtain materials and low cost, and it is an effective method worthy of clinical promotion.
Adolescent ; Adult ; Aged ; Child ; External Fixators ; Female ; Fracture Fixation ; Fracture Fixation, Internal ; Humans ; Male ; Metacarpal Bones ; Middle Aged ; Retrospective Studies ; Splints ; Treatment Outcome ; Young Adult

OBJECTIVE: To explore clinical effects of pulley suspension traction reduction combined with self-made splint fixation in treating extended distal radius fracture. METHODS: From December 2017 to December 2019, 60 patients with extended distal radius fractures were divided into observation group and control group, 30 patients in each group. In observation group, there were 12 males and 18 females, aged from 50 to 75 years old with an average of (59.63±8.08) years old;according to AO classification, 25 patients were type A2 and 5 patients with type A3;fractures were fixed by pulley suspension traction and self-made splint. In control group, there were 11 males and 19 females, aged from 52 to 76 years old with an average of (59.77±8.03) years old;according to AO classification, 24 patients were with type A2 and 6 patients were type A3;fractures were treated by conventional manipulation with self-made splint fixation. The radius height, ulnar angle and palmar angle between two groups were compared before and after treatment, and clinical effects were evaluated by advanced Green and O'Brien wrist joint scoring after treatment. RESULTS: All patients were followed up from 11 to 13 months with an average of (11.90± 0.80) months. The splint was removed for 42 to 60 days with an average of (50.20±4.94) days. After removal of splint, X-rays indicated that all patients obtained bone healing with smooth of joint surface. In observation group, radius height was (4.57± 1.16) mm, ulnar angle was (12.83±3.25) °, palmar angle were (-21.17±3.36) ° respectively before treatment, (10.10± 1.75) mm, (24.30±3.16) °, (9.40±2.13) ° respectively at 8 weeks after treatment;in control group, radius height, ulnar angle, palm angle were (4.50±1.43) mm, (12.83±3.10) °, (-21.50±3.38) ° respectively before treatment, and (8.90±1.24) mm, (21.20±2.91) °, (6.16±2.94) ° respectively at 8 weeks after treatment;there were no significant difference in radius height, ulnar deviation angle and palmar inclination between two groups before treatment ( CONCLUSION Compared with conventional manual traction and reduction, pulley suspension traction reduction combined with self made splint fixation for the treatment of extended distal radius fracture has more advantages with stable and reliable traction, good reduction, and better wrist joint function. It could be selected and applied according to the actual situation of patients.
Aged ; Bone Plates ; Female ; Fracture Fixation, Internal ; Humans ; Male ; Middle Aged ; Radius Fractures/surgery* ; Splints ; Traction ; Treatment Outcome