The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.

Objective:To conduct a retrospective study on the treatment outcomes of patients who underwent artificial temporomandibular joint (TMJ) replacement surgery and to evaluate the effectiveness of artificial TMJ treatment.Methods:This study selected 62 patients who received standard Biomet artificial TMJ treatment at Department of Orthognathic and TMJ Surgery, West China Hospital of Stomatology, Sichuan University from May 2010 to September 2023 as the study subjects. Among them, there were 15 male patients and 47 female patients. The average age was 33.5 years old(ranging from 18 to 67 years). This study statistically analyzed postoperative indicators, including maximum mouth opening, forward jaw movement, lateral movement, postoperative pain scores, and patient satisfaction.Results:This study included a total of 62 patients with 99 TMJ joints. No infections occurred postoperatively. The average follow-up period was 33.7 months (ranging from 7 to 170 months). At 6 months postoperatively, the mean mouth opening was (36.1±6.2) mm, lateral movement was (2.1±0.9) mm, and forward jaw movement was (1.0±0.9) mm. The pain visual analog scale score at 6 months postoperatively was (2.8±0.6), and patient satisfaction with the surgery was (8.8±1.1). Spiral CT scans conducted after surgery showed no joint dislocation or migration, and the artificial joint remained stable during the follow-up period.Conclusions:Artificial TMJ replacement is a valuable method for effectively restoring TMJ structure and essential functions related to mouth opening and chewing. It is worthy of promotion as a reconstructive approach for the temporomandibular joint

OBJECTIVE: A prospective study was conducted to investigate the feasibility and effectiveness of three-dimensional printed in vitro guide plates assisted hip arthroscopy in the treatment of Cam-type femoroacetabular impingement (FAI). METHODS: The clinical data of 25 patients with Cam-type FAI who met the selection criteria between December 2016 and September 2022 were collected. There were 13 males and 12 females with an average age of 42 years (range, 19-66 years). The disease duration ranged from 3 to 120 months, with an average of 22.2 months. The preoperative range of internal rotation-external rotation was (28.70±4.50)°, α angle was (69.04±0.99)°, visual analogue scale (VAS) score was 6.5±0.2, and modified Harris hip score (HHS) was 50.5±0.7. All patients were treated with hip arthroscopy assisted by three-dimensional printed in vitro guide plate. The occurrence of complications was observed postoperatively, α angle of the affected hip joint was measured on Dunn X-ray film, and the glenoid labrum injury was observed by MRI. The percentage of overlap between the Cam plasty area and the preoperative simulated grinding area was calculated by three-dimensional CT+reconstruction. The effectiveness was evaluated by VAS score and modified HHS score. RESULTS: Postoperative dorsalis pedis numbness occurred in 1 case, and the symptoms disappeared after 1 month of conventional drug treatment such as neurotrophy. Two cases of perineal skin injury occurred, and healed after symptomatic treatment. There was no male erectile dysfunction, deep incision infection, pulmonary embolism, or other serious complications occurred. The percentage of overlap between the Cam plasty area and the preoperative simulated grinding area was 81.6%-95.3%, with an average of 89.8%. All 25 patients were followed up 6-12 months, with an average of 8 months. At last follow-up, the range of internal rotation-external rotation was (40.10±2.98)°, α angle was (43.72±0.84)°, VAS score was 1.8±0.2, and the modified HHS score was 72.1±1.3, which significantly improved when compared with preoperative ones ( P<0.05). CONCLUSION The treatment of Cam-type FAI with three-dimensional printed in vitro guide plates assisted hip arthroscopy is safe and feasible, and can achieve good effectiveness.
Humans ; Male ; Female ; Arthroscopy/methods* ; Middle Aged ; Adult ; Femoracetabular Impingement/surgery* ; Prospective Studies ; Printing, Three-Dimensional ; Aged ; Treatment Outcome ; Range of Motion, Articular ; Hip Joint/surgery* ; Young Adult ; Bone Plates

Anatomical right superior segmentectomy has always been a difficult surgical procedure in laparoscopic liver resection. How to accurately judge the interface between liver segments, so as to achieve a true sense of anatomic resection based on portal territory is a new requirement in the era of precision liver surgery. The portal vein puncture and indocyanine green (ICG) fluorescence positive staining technique can effectively solve this problem, which has a series of advantages and certain technical requirements in anatomical right superior segmentectomy. ICG fluorescence staining can intuitively define the three-dimensional range of the liver segment, which is a more accurate navigation mode that helps liver surgeons identify the range of the right superior liver segment, thus conducting surgery more safely and normatively. The authors consult relevant studies and combined with clinical practice to explore the application value of laparoscopic ultrosound guided puncture and positive staining technique in anatomical right superior segmentectomy.

Objective: To generate a new classification for adult temporomandibular joint ankylosis (TMJA), which could effectively guide treatment strategies for adult TMJA patients with various clinical features. Methods: We developed a new "CD" classification system according to the preservation of the condyle (C) and the severity of dentofacial bone deformity (D). From January 2016 to April 2020, 56 TMJ patients (with 73 ankylosed joints) in our department were classified into 4 subgroups by ‘CD’ classification: condylar head preservation but no dentofacial deformities (C+D-), no condylar head preservation and no dentofacial deformities (C-D-), condylar head preservation and dentofacial deformities (C+ D+), and no condylar head preservation but dentofacial deformities (C-D+). Different strategies were used according to the clinical features of each subgroup. The clinical outcomes of these patients were analyzed. Different treatment strategies of temporomandibular joint reconstruction were adopted for different subclasses of patients and were followed. "C +": lateral arthroplasty (LAP) was used to remove the rigidity and preserve the medial residual condyle. "C-": if the ankylosing bone ball is small and the loss of ascending branch height is not obvious, arthroplasty should be performed to relieve ankylosis; however, if the ankylosing bone ball is large and the ascending branch height decreases significantly, joint reconstruction should be carried out after the ankylosis is relieved. "D +": surgical treatment of secondary dental and maxillofacial malformations at the same time or over stages. "D-": orthodontic treatment after operation to improve occlusal relationship and symptomatic treatment of oral diseases. Results: After treatment, all 73 ankylosed joints were completely released, and the average maximal interincisal opening increased from (3.6±3.2 )to (32.8 ± 5.4) mm (P<0.001), with no recurrence of ankylosis found during the 12-48 month follow-up period. Conclusion The generation and elaboration of a ‘CD’ classification system is intended to help as a TMJA reconstruction guide for adult TMJA treatment and be widely used in more hospitals.

Objective:To evaluate the 2-dimension and 3-dimension changes of upper airway of patients who were diagnosed with idiopathic condylar resorption (ICR) and anterior open bite as well as received bilateral temporomandibular joint (TMJ) prostheses replacement or bimaxillary orthognathic surgery.Methods:This study is a retrospective study. Seventeen patients diagnosed as ICR and anterior open bite in Department of Orthognathic and TMJ surgery, West China Hospital of Sichuan University were selected (January 2018 to December 2021) and divided into bilateral TMJ protheses replacement group (group R, n=8) and orthognathic group (group O, n=9), according to which surgery they have performed. In order to compare variation of upper airway before and after surgery in different dimensions and sections within the same group or between groups, Spiral computed tomography data were obtained before (1 month) and after operation (10 to 12 months) to measure the total volume of airway (VT), the maximum sagittal area (MSA), the maximum cross-sectional area (MACA), the minimum cross-sectional area (MICA), the area of the most posterior plane(PPA), the area of soft-palate plane (SPA), the area of the most posterior point of tongue base plane (PTA), the area of the root of epiglottis plane (EA), the oropharyngeal airway volume (VO), the glossopharyngeal airway volume (VG) and the laryngeal airway volume (VL). Wilcoxon signed-rank test were used to complete statistical analyses for VO (T2),SPA (T2),ΔMSA,ΔMACA in group R as well as PTA (T1),EA (T2) in group O. Statistical analyses of other items were performed with student′s t test. Results:VT, VO, VG, VL, MSA, MACA, MIC, PPA, PTA and EA of group R (T2) were significantly increased after TMJ prosthesis with Lefort Ⅰ osteotomy ( P<0.05). Meanwhile the VT, VO, VG, MSA, MACA, MICA, PPA and SPA of group O (T2) were significantly increased ( P<0.05). There were significant difference in ΔVT and ΔVL between group R [(6 854.80±3 197.82) mm 3, (2 252.85±1 527.96) mm 3] and group O [(3 367.91±3 124.62) mm 3, (413.21±1 244.44) mm 3]( t=2.27, P=0.038; t=2.74, P=0.015). Conclusions:Bilateral temporomandibular joint (TMJ) prostheses replacement and bimaxillary orthognathic surgery can both enlarge the areas and volumes of upper airway in patients who suffer from ICR and anterior open bite. Compared with bimaxillary orthognathic surgery, bilateral temporomandibular joint prostheses replacement plays a more pronounced role in enlargement and reconstruction of middle-inferior section of upper airway.

The teaching of orthognathic surgery is difficult because it is complex and emphasizes the combination of theory and practice. The traditional teaching method focuses on theoretical teaching, but due to the limitation of conditions, it is difficult for students to master the operation. In this paper, we apply the digital three-dimensional surgical simulation system combined with 3D printing in specialist training of orthognathic surgery. Digital software and 3D printing are applied in the theoretical teaching, surgical operation, summary and reflection to combine practical teaching with theoretical teaching, so as to stimulate the subjective initiative of the students. The results showed that the teaching evaluation of the experimental group [(3.89±0.84) points] was better than that of the control group [(2.91±1.21) points]. The application of digital three-dimensional surgical simulation system combined with 3D printing has achieved satisfactory results.

Objective: To provide a clinical reference by evaluating the precision of virtual surgical planning in two⁃ jaw orthognathic surgery. Methods : Thirty consecutive patients who required two⁃jaw orthognathic surgery were includ⁃ ed. A composite skull model was reconstructed using data from spiral computed tomography scan and surface scanning of the dental arch. LeFort I osteotomy of the maxilla and bilateral sagittal split ramus osteotomy of the mandible were simulated using Dolphin Imaging 11.7 Premium. Genioplasty was performed if indicated. Virtual plan was then trans⁃ ferred to operation room using 3D⁃printed surgical templates. Frankfort horizontal plane (FHP), midfacial plane (perpen⁃ dicular to the FHP through the nasion), and coronal plane (perpendicular to the FHP through the sella point) were the selected three symmetry planes.Midpoint of the contact of the maxillary and mandibular central incisors (UI, LI), and the mesio⁃buccal cusp of the first maxillary and mandibular molars (U6⁃R,U6⁃L, L6⁃R, L6⁃L) were the six chosen volu⁃metric landmarks. To calculate the linear difference and overall mean linear difference (mean difference of the distance between UI, LI, U6⁃R, U6⁃L, L6⁃R, L6⁃L to FHP, midfacial and coronal plane) between simulated and postoperative models, the distance between selected landmarks and symmetry planes was measured. To calculate the angular differ⁃ ence and overall mean angular difference, values of the angles constructed by the occlusal, palatal, and mandibular plane to FHP and midfacial plane respectively were determined on simulated and postoperative models Results: The virtual surgical planning was successfully transferred to actual surgery with the help of 3D⁃printed surgical templates. All patients were satisfied with the postoperative facial profile and occlusion. The overall mean linear difference was 0.81 mm (0.71 mm for maxilla and 0.91 mm for mandible); and the overall mean angular difference was 0.95° (the mean angular difference relative to FHP was 1.10°, and that relative to midfacial plane was 0.83°) Conclusion Virtual sur⁃ gical planning facilitated the diagnosis, treatment planning, and precise bony segments repositioning in two⁃jaw orthog⁃ nathic surgery.

Objective To understand the infected strains and prevalence of brucellosis in occupational population in Tacheng and Kashgar regions,Xinjiang Uygur Autonomous Region.Methods In September 2015,blood samples from occupational population (including herders,semi-agricultural and semi-pastoral,veterinarians) and non-occupational population (including students and cadres) were collected to detect Brucellaspecific antibody and bacterial nucleic acids by rose bengal plate test (RBPT),serological standard tube agglutination test (SAT) and PCR methods,respectively.The positive products of PCR were sent to Shanghai Sangon Biotechnology Co.,LTD.Then the sequence results were retrieved online using the basic alignment search tool (BLAST) in GenBank web page and uploaded to NCBI (National Center for Biotechnology Information).Results A total of 546 blood samples were tested,including 300 males,aged (55-± 15) years old,and 246 females,aged (54 ± 12) years old.The positive rates were 17.58％ (96/546) and 6.78％ (37/546) in 546 blood samples by serological method and genetic markers targeting omp22 and omp2,respectively.The positive rates were statistically significant (x2 =29.8,P ＜ 0.05).Additionally,based on BLAST analysis of outer membrane protein omp22 and omp2 genes,the positive products were identified as Brucella abortus,and the sequence similarity was 100.00％ (253/253,863/863 bp) to Brucella abortus strain Wisconsin genome assembly,chromosome (LT651712).Conclusions Brucellosis has a high infection rate in the occupational population of some animal husbandry-based groups in Xinjiang.The infection strain is abortive species Brucella,and health education for the occupational population and prevention of brucellosis should be strengthened to reduce the infection rate.