Objective: To explore the application effectiveness of healthcare failure mode and effect analysis (HFMEA) in optimizing intelligent blood logistics transport pathways for safety assurance. Methods: Data from 1 851 cases of intelligent blood logistics transport were collected between September 2023 and March 2025. Based on the implementation phases of HFMEA measures, the cases were divided into a control group (n=120), observation group 1 (n=219), and observation group 2 (n=1 512). Through systematic analysis of the transport processes, hazard scoring and decision tree analysis were conducted for each process, and phased optimization measures were implemented for high-risk failure modes. Results: The transport duration of intelligent blood logistics was 35.5 (20.8, 71.1) min in the control group, 25.1 (10.9, 40.7) min in observation group 1, and 9.9 (4.2, 44.5) min in observation group 2. Observation group 2 exhibited significantly shorter transport time compared to both observation group 1 and the control group, with statistically significant differences between groups (P<0.000 1). Conclusion: The implementation of HFMEA-driven measures significantly reduced intelligent blood logistics transport duration, thereby fostering the evolution of smart hospital ecosystems while enhancing healthcare service quality and operational efficiency.

Background Toluene and chlorobenzene have been designated as surrogate contaminants in the challenge test for evaluating the safety of recycling processes for food-contact recycled polyethylene terephthalate (rPET). Establishing a reliable analytical method is essential for ensuring the compliant use of rPET and safeguarding food safety. Objective To develop a rapid quantitative method for determining toluene and chlorobenzene in rPET using headspace gas chromatography-mass spectrometry (HS-GC-MS), as part of the challenge test for process safety evaluation. Methods The effects of different chromatographic columns and headspace conditions on detection of target analytes were investigated. Three columns HP-5 ms UI (30 m×0.25 mm×0.25 μm), DB-624 (30 m×0.32 mm×1.8 μm), and VF-WAXms (30 m×0.25 mm×0.25 μm) were compared for separation efficiency and peak shape. Headspace equilibration temperatures (50-100 ℃) and equilibration times (10-30 min) were evaluated to determine the optimal instrumental parameters. The effect of sample grinding on recovery was assessed to select the best pretreatment conditions. The established method was validated for selectivity, linearity, sensitivity, accuracy, and precision, and was subsequently applied to the analysis of 12 rPET samples. Results The target analytes achieved good separation and response within 15 min, under the optimized conditions using an HP-5 ms UI column, a headspace equilibration temperature of 60 ℃ and a 10 min equilibration time. Direct analysis without grinding yielded satisfactory recovery rates. Toluene and chlorobenzene showed excellent linearity (0.0030-5.0 mg·kg⁻¹, R²≥0.999). The limits of detection (LOD) and quantification (LOQ) were 0.00003 mg·kg⁻¹ and 0.00011 mg·kg⁻¹ for toluene respectively, and 0.00011 mg·kg⁻¹ and 0.00037 mg·kg⁻¹ for chlorobenzene respectively. The recoveries of the matrix spike at low and high spiking levels ranged from 88.6% to 110%, with relative standard deviations of 0.52%-4.9% (n=6). Among the 12 rPET samples from different recycling stages, three samples contained detectable levels of toluene (0.196-0.250 mg·kg⁻¹) and chlorobenzene (0.704-0.867 mg·kg⁻¹). Conclusion The proposed method is simple, rapid, highly sensitive, and accurate, making it suitable for determining toluene and chlorobenzene in food-contact rPET. It provides a robust technical approach for the safety evaluation of rPET recycling processes.

OBJECTIVE To establish a method for simultaneous determination of plasma concentration of lamotrigine（LTG）， levetiracetam（LEV） and perampanel（PER） in children with epilepsy and apply this method in clinical practice. METHODS Plasma proteins were precipitated with acetonitrile. Using PER-D 5 as internal standard， ultra-high performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） method was adopted. The determination was performed on ACQUITY UPLC HSS T3 C 18 column with mobile phase consisted of 0.1% formic acid with 5 mmol/L ammonium acetate-acetonitrile （gradient elution） at the flow rate of 0.3 mL/min. The column temperature was 40 ℃， and sample size was 5 μL. The analysis time was 5 min. The electrospray ionization source and multiple reaction monitoring mode were used for positive ion scanning. The ion pairs used for quantitative analysis of LTG， LEV， PER and internal standard were m / z 255.9→144.9， m / z 171.1→126.1， m / z 350.1→219.0 and m / z 354.9→220.2， respectively. The steady-state trough concentrations of the aforementioned drugs in the plasma of 14 pediatric epilepsy patients receiving combination therapy were determined using the same UPLC-MS/MS method as above. RESULTS The linear ranges of LTG， LEV and PER were 0.15-24 μg/mL （ R 2 ＞0.993）， 0.312 5-50 μg/mL （ R 2 ＞0.997） and 6.25-1 000 ng/mL （ R 2 ＞0.997）， respectively. The lower limits of quantification were 0.15 μg/mL， 0.312 5 μg/mL and 6.25 ng/mL， respectively. RSDs of intraday and interday precision tests of the three drugs were no more than 9.83%， and the accuracies （relative errors） were between －9.33% and 13.72%（ n ＝6 or n ＝18）； the average extraction recovery rates were 86.4%-97.9%， and the average matrix effects were 86.9%-110.0% （ n ＝6）. The absolute values of the relative errors in the stability tests were all below 15%. The steady-state trough concentrations of LTG， LEV and PER were （5.64±4.03）μg/mL， （10.67±8.78）μg/mL and（450.20±251.27）ng/mL， respectively； the rates of achieving target trough concentrations were 71.4%， 37.5% and 84.6%， respectively. CONCLUSIONS The established UPLC-MS/MS method is specific， rapid and suitable for the plasma concentration monitoring in epileptic children receiving combination therapy.

Background Long working hours, as a common risk factor for occupational stress, is closely related to the occurrence of depressive symptoms. Understanding how long working hours affect occupational stress and depressive symptoms will inform occupational health interventions. Objective To quantify the impact of long working hours exposure on occupational stress and depressive symptoms among Internet industry employees, translate black-box outputs into actionable insights, and demonstrate the value of interpretable machine learning for early-warning occupational-health surveillance. Methods A dataset was derived from a cross-sectional survey involving 2866 internet industry employees in China. This survey was part of the project Risk Assessment Of Long Working Hour Exposure And Its Adverse Health Effects, conducted by the National Institute for Occupational Health and Poisoning Control, Chinese Center for Disease Control and Prevention, from 2021 to 2023. Working hours, occupational stress and depressive symptoms were quantified with a set of structured questionnaires including the Core Occupational Stress Scale and the Patient Health Questionnaire. Pairwise associations were screened by Mantel tests and variance-inflation factors. Key predictors identified through feature selection were fed into six machine-learning risk-prediction models. Visual interpretation was provided by feature importance, Shapley additive explanations (SHAP) and local interpretable model-agnostic explanations (LIME), while directed causal effects and intervention impacts of prolonged working hours exposure on occupational stress and depressive symptoms were dissected with causal explanation of features techniques. Results The positive rates of occupational stress and depressive symptoms among internet employees were 12.9% and 77.8% respectively. Twelve core features for occupational stress and nine for depressive symptoms were retained after selection. After these features were supplied to six predictive algorithms and evaluated on five metrics, the Light Gradient Boosting Machine (LGBM) achieved the highest accuracy—0.89 for occupational stress and 0.79 for depressive symptoms on the hold-out test set. The feature-importance rankings converged on fatigue accumulation and life satisfaction as dominant drivers for both outcomes, whereas weekly working hours and daily overtime emerged as the principal exposure-related predictors. The SHAP summary plots revealed that longer weekly hours and daily overtime systematically elevated the probability of occupational stress. The causal feature explanation further quantified that ascending one category in weekly working hours increased the probability of occupational stress by 7.04%. Conclusion Exposure to long working hours is associated with both occupational stress and depressive symptoms among internet industry employees. Interpretable machine-learning frameworks translate these associations into transparent, defensible drivers, enabling precise identification of the pivotal factors and their interplay. This evidence base equips occupational-health practitioners with actionable insights for designing targeted prevention and intervention strategies.

Severe acute pancreatitis （SAP） is closely related to dysfunction of the spleen-stomach ascent and descent. Due to the influence of modern lifestyle and dietary factors， Qi deficiency in the spleen and stomach has become the pathological basis of SAP. Its pathogenesis is characterized by dampness， heat， pathogenic factors， stasis， stagnation， obstruction， Fu-organs Qi obstruction， pathogenic excess， and healthy Qi deficiency. At different stages of the disease course of SAP， there is a focus on both pathogenic excess and healthy Qi deficiency. It is specifically manifested as Fu-organs stagnation and heat accumulation， as well as pathogenic excess and healthy Qi deficiency， during the systemic inflammatory response phase， intermingling of blood stasis and pathogenic factors， as well as Qi deficiency and blood stasis， during the infection period， and weakness of the spleen and stomach， as well as healthy Qi deficiency and lingering pathogenic factors， during the residual infection period. Based on the theory that "the spleen and stomach are the acquired foundation"， a staged treatment method centered on the core principle of "strengthening healthy Qi to eliminate pathogenic factors" was developed. The staged treatment method included "clearing the Fu-organs to expel turbidity， replenishing Qi to harmonize the stomach， activating blood circulation to expel pathogenic factors， replenishing Qi to relieve pain， promoting digestion to stimulate appetite， and replenishing Qi to invigorate the spleen". In clinical practice， Hewei Tongxie mixture， Yikang mixture， and Shiwei Jianpi Xiaoshi powder were selected for staged treatment of SAP. This article systematically summarized the theoretical basis of traditional Chinese medicine， Western medicine foundation， modern pharmacological mechanisms， and clinical application experience of the staged treatment of SAP with "strengthening the healthy Qi to eliminate pathogenic factors"， providing new ideas for the treatment of SAP with traditional Chinese medicine.

ObjectiveTo investigate the effect and underlying mechanism of the Wulao Qisun prescription on pathological new bone formation in ankylosing spondylitis （AS）. MethodsSynovial fibroblasts were isolated from the hip joints of AS patients and observed under a microscope to assess cell morphology. The cells were identified using immunofluorescence staining. The isolated AS fibroblasts were divided into blank group， low drug-containing serum group， medium drug-containing serum group， high drug-containing serum group， and positive drug group. After drug intervention， cell proliferation was measured using the cell counting kit-8 （CCK-8） assay to observe fibroblast growth and determine the optimal intervention time. Alkaline phosphatase （ALP） activity was measured using the alkaline phosphatase assay. Protein expression of osteocalcin （OCN）， osteopontin （OPN）， and runt-related transcription factor 2 （Runx2） was detected by Western blot. The mRNA expression levels of Wnt5a， β-catenin， and Dickkopf-1 （DKK-1） were measured by real-time quantitative polymerase chain reaction （Real-time PCR）. ResultsCompared with the blank group， each drug-containing serum group of Wulao Qisun prescription and the positive drug group inhibited the proliferation of AS fibroblasts and reduced ALP expression （P<0.01）. Compared with the blank group， the low drug-containing serum group of Wulao Qisun prescription downregulated β-catenin mRNA expression （P<0.05）. The medium and high drug-containing serum groups and the positive drug group significantly downregulated Wnt5a and β-catenin mRNA expression （P<0.05， P<0.01）， with the positive drug group showing the most pronounced effect （P<0.01）. The high drug-containing serum group and the positive drug group significantly upregulated DKK-1 mRNA expression （P<0.01）. Compared with the blank group， the low drug-containing serum group of Wulao Qisun prescription inhibited the expression of OPN and Runx2 proteins （P<0.05， P<0.01）， while the medium and high drug-containing serum groups and the positive drug group inhibited the expression of OCN， OPN， and Runx2 proteins （P<0.05， P<0.01）. ConclusionThe Wulao Qisun prescription can inhibit the proliferation and osteogenic differentiation of AS fibroblasts， thereby delaying the formation of pathological new bone in AS. The possible mechanism involves the regulation of Wnt/β-catenin-related gene expression， further inhibiting the transcription of downstream target genes.

In recent years,the market share of food and medicine homology substances has continued to grow,and various types of contamination issues have become the focus of attention both inside and outside the industry.The contamination not only affects the original medicinal quality,but also leads to the accumulation of toxic substances in the human body,causing acute and chronic severe hazards such as vomiting,poisoning and cancer.Therefore,the development of biosensors that can conveniently,accurately and sensitively detect various pollutants in food and medicine homology substances has become a research hotspot.Aptasensors based on metal-organic frameworks(MOFs)with advantages such as strong specificity,rapid response and simple operation,have been widely used in detection of various pollutants.This review focused on the research progress of aptasensors based on MOFs for detection of food and medicine homology contamination in the past few years,and provided a detailed comparison and analysis for detection of chemical pollutants(such as pesticide residues,heavy metal residues,mycotoxins,etc.)and microbial contamination in food and medicine homology substances.Besides,the development trend and possible challenges of MOFs aptasensors in detection of food and medicine homology substances in the future were discussed,which was anticipated to provide a reference for the development of new MOFs aptasensors.

Chrysophanol(Chr)and physcion(Phy)are primary active ingredients of a well-known traditional Chinese medicine namely rhubarb(Chinese name:Dahuang),and their glucuronides have been revealed as the dominant forms presenting in rats after oral administration.Either Chr or Phy has two glycosylation sites,resulting in a pair of positional isomers for glucuronides of either compound(CG1&CG2 and PG1&PG2).To confirmatively identify these glucuronides,energy-resolved mass spectrometry(ER-MS)was used to pursue the fragmentation trajectories of the targeted fragment ions,and the resultant breakdown graphs that were described by the optimal collision energy(OCE)were expected to exhibit the differences of glycosidic bond cleavage between the isomers.Quantum chemical calculation was thereafter conducted to produce the bond dissociation energy(BDE)of the glycosidic bonds.The isomers were unambiguously identified through applying the positive correlation rule between OCE and BDE.Fortunately,the glucuronides of Chr and Phy in vivo were observed through liver microsomes incubationin vitro.ER-MS was utilized to collect the Gaussian-shaped breakdown graphs in response to the neutral loss of 176 Da,and the absolute values of OCE were compared between positional isomers.The results revealed that CG1(-32.31 eV)>CG2(-31.61 eV),and nonetheless,PG1(-30.00 eV)Chr-8-GluA(-48.787 kJ/mol),and nonetheless,Phy-1-GluA(-48.672 kJ/mol)

A novel analytical method was developed in this study by combining online solid phase extraction with ultra performance liquid chromatography-tandem mass spectrometry(Online SPE-UPLC-MS/MS)for simultaneous determination of 50 kinds of steroid hormones in surface water.Specifically,after high-speed centrifugation of 4 mL water samples,the supernatant was directly injected into an Oasis HLB online SPE column for enrichment and purification.Subsequently,the target compounds were transferred to the analytical column via valve switching for separation and analysis.The chromatographic separation was performed on a Thermo Acclaim RSLC C18 column(100 mm×2.1 mm,2.2 μm),using a mobile phase composed of 5 mmol/L ammonium fluoride aqueous solution and acetonitrile.Mass spectrometric detection was conducted in positive ion mode,utilizing multiple reaction monitoring(MRM)with quantification achieved by the internal standard method.The method validation demonstrated that the limits of detection(LOD)for the 50 kinds of steroid hormones ranged from 0.02 to 0.50 ng/L,while the limits of quantification(LOQ)were between 0.08 and 1.67 ng/L.The average recoveries in surface water samples at spiked concentrations of 5,20 and 200 ng/L were between 74.1％and 119％,with relative standard deviations(RSDs)of 0.2％to 9.9％.This method was applied to analyze 11 surface water samples collected from sites surrounding a pharmaceutical and chemical industrial park.A total of 44 kinds of steroid hormones were detected,with concentrations ranging from 0.11 to 88.6 ng/L,revealing the presence of hormone contamination in the environmental waters surrounding industrial areas.Compared with the traditional offline SPE methods,the proposed online SPE technique significantly reduced sample volume requirements and pretreatment time,while minimizing the loss of target compounds during the pretreatment process.Moreover,compared to reported online SPE techniques,this method achieved high-throughput analysis of multiple classes of steroid hormones,with lower detection limits and higher recoveries.Overall,this method provided rapid sample preparation,high sensitivity,and excellent stability,making it suitable for the direct analysis of trace steroid hormones in surface water.

Phosgene is a highly reactive chemical substance and a prevalent chemical warfare agent,and it is vitally important for rapid and accurate detection of phosgene to counteract terrorist threats and industrial accidents.In this work,a phosgene probe,designated as SX-Pho,which incorporated benzimidazole and hydroxyl groups as recognition motifs,was prepared through Suzuki coupling and Debus-Radziszewski methodologies to incorporate an electron-donating carbazole moiety.This probe exhibited a large Stokes shift(Approximately 130 nm).Upon exposure to triphosgene/triethylamine conditions(in situ phosgene generation),the fluorescence emission of probe at 470 nm underwent significant quenching,with a 20-fold reduction in intensity,while the fluorescence lifetime decreased from 3.30 ns to 3.06 ns.Concentration titration experiments demonstrated that SX-Pho achieved a lower detection limit of 57.8 nmol/L with high specificity and interference resistance.Preton nuclear magnetic resonance spectroscopy(1H NMR),high-resolution mass spectrometry,and density functional theory(DFT)calculations confirmed the cyclization reaction between hydroxyl groups,imines,and phosgene.The extent of overlap between the highest occupied molecular orbital(HOMO)and the lowest unoccupied molecular orbital(LUMO)was notably decreased,leading to the suppression of radiative transitions.The energy gap underwent a reduction of 0.43 eV,while the non-radiative transition was augmented,resulting in fluorescence quenching and achieving rapid detection of phosgene.Based on this,probe-loaded test strips were prepared.The color change under 365 nm illumination allowed visual discrimination of phosgene at concentrations below 20 μL/L.Furthermore,using a smartphone's built-in RGB application to measure the intensity of the blue(B)channel after the test strips were exposed to phosgene enabled both qualitative and quantitative detection.The detection range was 1.82-50 μL/L,with a limit of detection(LOD)of 1.814 μL/L.