BACKGROUND

Caustic ingestion is a major public health problem worldwide [1]. It imposes huge economic burden in terms of medical cost to poorly resourced health system of developing countries [2]. Household cleaning products, such as sodium hypochlorite (NaOCI), are the most common cause of caustic exposure [3]. NaOCI ingestion consistently ranks second in caustic ingestion cases in Northern Mindanao Medical Center (NMMC) based on toxicology census from 2015 to 2018. The aim of this study is to determine the epidemiologic profile, clinical findings and outcome of admitted patients who ingested NaOCI.

This a single-center descriptive, cross-sectional study of 40 cases of sodium hypochlorite ingestion admitted at NMMC from January 2015 to December 2018.

There were a total of 17 males and 23 females. Majority of patients were 0-5 years of age (46.5%; mean age of 2), followed by age range of 18-64 years old (40.0%; mean age of 35). Twenty-nine cases (72. 5%) cases of NaOCI ingestion were accidental and the remaining 11 (27.5%) were non-accidental. The non-accidental cases belong to the 12-17 (mean age 15.3) and 18-64 (mean age 31) years old age groups at 33.3% and 66.7%, respectively, with prevalence in females at 81.8%. Non-accidental cases increase with age, and among females. Majority of all ingested less than 50 ml of NaOCI. Two non-accidental cases (18.2%) ingested more than 100 ml of NaOCI were observed to have more than 2 signs and symptoms. Majority of patients presented with vomiting. Greater portion of non- accidental cases complained of abdominal or epigastric pain (54.5% vs 10%), oropharyngeal erythema (9.1 % vs 6.9), and odynophagia (45.5% vs 0). None of the patients had serious signs and symptoms. All patients were discharged improved and without sequelae.

Most NaOCI cases were accidental especially in children. Non-accidental cases increase significantly with age, with most cases found among adolescents and young adults, with higher prevalence among females. Majority of patients only ingested less than 50 ml, and that ingestion of 100 ml or more of NaOCI is associated with more than 2 signs and symptoms. The most predominant symptom is vomiting. Greater portion of non-accidental cases complained of abdominal or epigastric pain and odynophagia. None of the patients exhibit severe signs and symptoms. This study showed that all 40 cases of sodium hypochlorite ingestion did not have sequelae upon discharge.

OBJECTIVES: This study aimed to compare the effectiveness of ultrasound and acoustic and laser cleaning of curved root canals. METHODS: A total of 92 molars with independent root canals with a curvature of 20°-40° were prepared and standardized at 04 25# and stained with gentian violet solution for 72 h. Among them, 52 were randomly divi-ded into four groups for final rinsing (n=13): NI group, PUI group, EDDY group, and PIPS group. Ten samples in each group were cut horizontally along the long axis perpendicular to the root and divided into curved upper, curved, and apical segments. Images were taken with a stereomicroscope and Image J measurements were taken to calculate the depth of rinse penetration. The remaining three samples from each group were split along the long axis of the dentin, photographed by scanning electron microscope to record the dentin tubule exposure and staining layer, and scored for staining layer by double-blind method. SPSS 26.0 software was used to perform statistical analysis and select the best flushing method. An extra 40 samples were randomly divided into four groups for detection of flushing fluid penetration depth (n=10): 10, 20, 30, and 40 s. RESULTS: In the upper part, the mean depth of infiltration was not significantly different between the experimental and control groups (P>0.05). The PIPS group had a significantly lower smear layer score than the control group and the EDDY group (P<0.01). In the curved segment, the mean depth of infiltration was significantly greater in the PUI group than in the control group (P<0.05); the tarnish layer score was lower in each experimental group than in the control group. At the top, the mean depth of infiltration was greater in the PUI and PIPS groups than in the control group (P<0.05), and the smear layer score was lower in the PIPS group than in the other groups (P<0.05). After the time was changed, the depth of infiltration of PUI increased only in the apical segment as the flushing time increased. CONCLUSIONS The PUI and PIPS methods facilitate the penetration of irrigation solution into the dentin canal in curved root canals, especially in the apical segment. The PIPS technique is effective in removing the smear layer in curved root canals.
Humans ; Dental Pulp Cavity ; Microscopy, Electron, Scanning ; Root Canal Irrigants ; Root Canal Preparation/methods* ; Smear Layer ; Sodium Hypochlorite ; Therapeutic Irrigation/methods* ; Double-Blind Method

OBJECTIVES: Root canal therapy is the most effective and common method for pulpitis and periapical periodontitis. During the root canal preparation, chemical irrigation plays a key role. However, sodium hypochlorite (NaOCl), the widely used irrigation fluid, may impact the bonding strength between dentin and restorative material meanwhile sterilization and dissolving. Therefore, it's important to explore the influence of NaOCl on the adhesion between dentin and restoration materials to ensure clinical efficacy. This study aims to explore the effect of NaOCl on dentine adhesion and evaluate the effect of dentine adhesion induced by sodium erythorbate (ERY), and to provide clinical guidance on dentin bonding after root canal therapy. METHODS: Seventy freshly complete extracted human third molars aged 18-33 years old, without caries and restorations were selected. A diamond saw was used under running water to achieve dentine fragments which were divided into 10 groups with 14 fragments in each group: 2 control [deionized water (DW)±10% ERY] and 8 experimental groups (0.5%, 1%, 2.5%, and 5.25% NaOCl±10% ERY). The dentine specimens in the control group (treated with DW) and the experimental groups (treated with 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl) were immersed for 20 min using corresponding solutions which were renewed every 5 min. The other 5 groups were immersed in 10% ERY for 5 min after an initial washing with DW for 1 min. Then, we selected 4 dentine fragments from all 14 fragments in each group and the numbers and diameters of opening dentinal tubules were observed under scanning electron microscope (SEM). The other 10 dentine fragments from each group were used to make adhesive samples by using self-etch adhesive wand composite resin. All the above adhesive samples were sectioned perpendicular to the bonded interface into 20 slabs with a cross-sectional area of 1 mm×1 mm using a diamond saw under the cooling water, and then the morphology of 10 slabs in each group's bonding interface was observed from aspects of formation of resin tags, depth of tags in dentin, and formation of hybrid layer under SEM. The other 10 slabs of each group's microtensile bond strength and failure modes were also analyzed. RESULTS: Among the 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules gradually increased with the rise of concentration of NaOCl solution (all P<0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, 2.5% NaOCl, and 5.25% NaOCl groups, the number and diameter of patent dentinal tubules increased after using ERY, but without significant difference (all P>0.05). Among the DW, 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, the scores of formation of resin tags under SEM gradually increased with the increase of concentration of NaOCl solution, while the score in the 5.25% NaOCl group decreased significantly compared with the score of the 2.5% NaOCl group (P<0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (all P>0.05). The scores of length of the tags under SEM in the 5.25% NaOCl group was significantly higher than the scores of DW, 0.5% NaOCl, and 1% NaOCl groups (all P<0.05), and it was also higher than the score of the 2.5% NaOCl group, but without significant difference (P>0.05). There was no significant difference between using 10% ERY groups and without using 10% ERY groups (P>0.05). The scores of formation of hybrid layer under SEM in the 2.5% NaOCl and 5.25% NaOCl groups significantly decreased compared with the score of the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). Microtensile bond strength was greater in the 0.5% NaOCl, 1% NaOCl, and 2.5% NaOCl groups, but lower in the 5.25% NaOCl group than that in the DW group (all P<0.05). There were significant differences between the 2.5% NaOCl±10% ERY groups and between the 5.25% NaOCl±10% ERY groups (all P<0.05). The incidence of type "Adhesive" of failure modes in the 5.25% NaOCl group was significantly higher than that in other groups (all P<0.05), while the incidence of type "Adhesive" in the 5.25% NaOCl+10% ERY group was lower than that in the 5.25% NaOCl group (P<0.05). CONCLUSIONS The bonding strength to dentine increases with the increase of NaOCl concentration when the concentration lower than 2.5%; whereas it is decreased at a higher concentration (such as 5.25%). 10% ERY has a definite recovery effect on attenuated bonding strength to 5.25% NaOCl-treated dentine.
Adolescent ; Adult ; Ascorbic Acid ; Dental Bonding ; Dentin ; Dentin-Bonding Agents/pharmacology* ; Diamond/pharmacology* ; Humans ; Materials Testing ; Microscopy, Electron, Scanning ; Resin Cements/pharmacology* ; Sodium Hypochlorite/pharmacology* ; Tensile Strength ; Water/pharmacology* ; Young Adult

The aim of this study was to compare the efficiency of four final irrigation protocols in smear layer removal and bacterial inhibition in root canal systems. Thirty roots inoculated with Enterococcus faecalis were prepared with ProTaper Universal files. The teeth were disinfected by conventional needle irrigation, sonic agitation using the EndoActivator device, passive ultrasonic irrigation, or an M3 Max file. Teeth with no root canal preparation served as blank controls for the establishment of the infection baseline. Teeth with preparation but no final irrigation served as a post-instrumentation baseline. After the final irrigation, the teeth were sectioned in half. One half of each tooth was examined by scanning electron microscopy (SEM) to assess smear layer removal using a five-point scale. The other half was examined by confocal laser scanning microscopy (CLSM) using the LIVE/DEAD BackLight bacterial viability kit to evaluate the depth of bacterial survival in dentinal tubules. SEM analysis revealed no significant difference in smear layer removal throughout the whole canal among the EA, PUI, and M3 Max groups (P > 0.05). CLSM revealed that PUI achieved the greatest bacterial inhibition depth in the coronal ((174.27 ± 31.63) μm), middle ((160.94 ± 37.77) μm), and apical ((119.53 ± 28.49) μm) thirds of the canal (all P < 0.05 vs. other groups). According to this comprehensive SEM and CLSM evaluation, PUI appears to have the best infection control ability in root canal systems.
Dental Pulp Cavity ; Edetic Acid ; Humans ; Microscopy, Electron, Scanning ; Root Canal Irrigants ; Root Canal Preparation ; Smear Layer ; Sodium Hypochlorite

OBJECTIVE: This work aims to uncover the promoting effect of 17% ethylenediaminetetraacetic acid (EDTA) irrigation on the dentin adhesion of Enterococcus faecalis (E. faecalis). METHODS: Forty-eight half split samples and twelve dentin slices were randomly divided into three experimental groups and one control group. The experimental groups and the control group were soaked with EDTA in different time lengths and with normal saline, respectively. E. faecalis was inoculated, and its dentin adhesion was measured via scanning electron microscopy, confocal laser scanning microscopy (CLSM), colony forming unit counts, and histological Gram staining. RESULTS: According to histological Gram staining, the depth showed no statistically significant differences between 1 min group and the control group, 1 min group and 3 min groups (P>0.05). E. faecalis intruded in the dentine tubules (measured by CLSM), and the thickness of the biofilm on the dentin surface and the colony numbers of experimental groups were greater than those of the control group (P<0.05). The differences between the three experimental groups were statistically signi-ficant (P<0.05). CONCLUSIONS EDTA (17%) irrigation can promote E. faecalis adhesion to dentin. This adhesion would in turn prolong EDTA treatment time.
Biofilms ; Dentin ; Edetic Acid ; Enterococcus faecalis ; Microscopy, Confocal ; Root Canal Irrigants ; Sodium Hypochlorite

OBJECTIVE: This study aimed to evaluate the effectiveness of XP-endo Finisher (XPF) file and passive ultrasonic irrigation (PUI) in the smear layer removal of the root canal. METHODS: A total of 60 human single-rooted premolars were selected and decoronated to standardize their canal length to 16 mm. Tooth samples were prepared using a S3 rotary system to prepare root canal with the file size of 3S and then randomly divided into 6 groups according to the final irrigation protocol, as follows: XPF 3 mL of 3% NaOCl for 1 min (group A); XPF 3 mL of 3% NaOCl for 1 min, followed by 4 mL of 17% ethylene diamine tetraacetic acid (EDTA) for 1 min (group B); PUI of 3 mL of 3% NaOCl for 1 min (group C); PUI of 3 mL of 3% NaOCl for 1 min, followed by 4 mL of 17% EDTA for 1 min (group D); 3 mL of 3% NaOCl for 1 min by using a syringe and a 30 G side-vented needle (group E); and 3 mL of 3% NaOCl for 1 min by using a syringe and a 30 G side-vented needle, followed by 4 mL of 17% EDTA for 1 min (group F). After the completion of the root canal preparation, the teeth were split into two longitudinally. The mean numbers of the visible open dentinal tubules in the apical and middle thirds of the root canals were evaluated via scanning electron microscope. RESULTS: The whole surfaces of the root canals in groups A, C, and E were covered by a smear layer. Groups A and C possessed significantly higher number of visible open dentinal tubules than in group E (P<0.05), with statistically insignificant difference between groups A and C (P>0.05). The apical third of the samples in groups B and D and in the middle thirds of canals in group F exhibited a small amount of smear layer, and the dentinal tubules were open or semi-open. The root canal surfaces in the apical third of the samples in group F were covered by a smear layer, and the dentinal tubules were sealed or semisealed. The smear layers in the middle third of the samples in groups B and D were removed, and the dentinal tubules were more visibly open than those of the four other groups (P<0.05). The difference between groups B and D were statistically insignificant (P>0.05). CONCLUSIONS The difference between XPF and PUI in terms of the smear layer removal of the root canals was insignificant. Hence, XPF, as a new irrigation agitation technique, can aid in improving smear layer removal.
Dental Pulp Cavity ; Edetic Acid ; Humans ; Microscopy, Electron, Scanning ; Root Canal Irrigants ; Root Canal Preparation ; Smear Layer ; Sodium Hypochlorite

The purpose of this study was to evaluate the effects of deproteinization and an additional primer treatment on the microtensile bond strength of a newly developed self-adhesive resin cement to dentin. The occlusal dentin of extracted human third molars was randomly divided into four groups according to the surface treatment: a control (CON) with no treatment; applying a deproteinizing agent (DPT) (5% sodium hypochlorite); using a primer (PRI) (G-CEM ONE Adhesive enhancing primer, GC); and applying a deproteinizing agent and a primer (DPT-PRI). Composite resin blocks with a disk shape (diameter, 10 mm; height, 4 mm) were bonded to the treated dentin using a self-adhesive resin cement (G-CEM ONE, GC). The specimens were sectioned into sticks with a cross-section of 1 mm² and tested to failure in tension mode at a crosshead speed of 1 mm/min. All groups showed a significantly higher microtensile bond strength compared to CON (p<0.05). PRI showed the highest microtensile bond strength followed by DPT and DPT-PRI (p<0.05). No significant differences were observed between DPT and DPT-PRI (p>0.05). Within the limitations of this study, a deproteinizing agent or specific primer can enhance the microtensile bond strength of the self-adhesive resin cement to dentin. However, it is not recommended to use a primer in combination with the deproteinizing agents.
Adhesives ; Dentin ; Humans ; Molar, Third ; Resin Cements ; Sodium ; Sodium Hypochlorite

OBJECTIVES: Irrigants are imperative in endodontic therapy for the elimination of pathogens from the infected root canal. The present study compared the antimicrobial efficacy of octenidine dihydrochloride (OCT) with chlorhexidine (CHX) and sodium hypochlorite (NaOCl) against Staphylococcus epidermidis (S. epidermidis) for root canal disinfection. MATERIALS AND METHODS: The minimum inhibitory concentration (MIC) was obtained using serial dilution method. The agar diffusion method was then used to determine the zones of inhibition for each irrigant. Lastly, forty 6-mm dentin blocks were prepared from human mandibular premolars and inoculated with S. epidermidis. Samples were randomly divided into 4 groups of 10 blocks and irrigated for 3 minutes with saline (control), 2% CHX, 3% NaOCl, or 0.1% OCT. Dentin samples were then collected immediately for microbial analysis, including an analysis of colony-forming units (CFUs). RESULTS: The MICs of each tested irrigant were 0.05% for CHX, 0.25% for NaOCl, and 0.0125% for OCT. All tested irrigants showed concentration-dependent increase in zones of inhibition, and 3% NaOCl showed the largest zone of inhibition amongst all tested irrigants (p < 0.05). There were no significant differences among the CFU measurements of 2% CHX, 3% NaOCl, and 0.1% OCT showing complete elimination of S. epidermidis in all samples. CONCLUSIONS: This study showed that OCT was comparable to or even more effective than CHX and NaOCl, demonstrating antimicrobial activity at low concentrations against S. epidermidis.
Agar ; Anti-Bacterial Agents ; Bicuspid ; Chlorhexidine ; Dental Pulp Cavity ; Dentin ; Diffusion ; Disinfection ; Humans ; In Vitro Techniques ; Methods ; Microbial Sensitivity Tests ; Sodium Hypochlorite ; Staphylococcus epidermidis ; Staphylococcus ; Stem Cells

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.
Adhesives ; Cementation ; Computer-Aided Design ; Continental Population Groups ; Dental Pulp Cavity ; Endodontics ; Follow-Up Studies ; Hemorrhage ; Humans ; Inlays ; Molar ; Occlusal Adjustment ; Pulpitis ; Rubber Dams ; Sodium Hypochlorite ; Tooth

PURPOSE: Although dental impression disinfection is determinant to reduce the cross-infection risk, some studies have shown that, in real practice, the disinfection procedures vary considerably. Thus, the aim of this study was to evaluate the antimicrobial effectiveness and the impact on the dimensional stability of addition silicone' impressions of water wash and the most clinically used disinfection solutions: 3% hydrogen peroxide, commercial disinfectant MD520 (Durr) and 1% and 5.25% sodium hypochlorite. MATERIALS AND METHODS: For this investigation, dental impressions were taken on 16 volunteer dental students. The antimicrobial effectiveness of each procedure was evaluated by pour plate method. The dimensional stability was evaluated using a standardized stainless-steel model, according to ANSI/ADA nº19 specification. RESULTS: The study results showed that water wash does not alter the dimensional stability of addition silicone impressions but doesn't reduce the microbial load of the material (P>.05). On the other hand, addition silicone disinfection by immersion with 3% hydrogen peroxide, MD520 (Durr), or sodium hypochlorite at 1% and 5.25% does not alter the dimensional stability significantly but reduces > 99.9% of the microbial load of the impressions (P<.001). CONCLUSION: Addition silicone impressions should always be disinfected after water wash in order to reduce effectively the cross-infection risk. All disinfectants tested showed high antimicrobial efficiency without significant changes in three-dimensional shape of impressions. Hydrogen peroxide and sodium hypochlorite are of particular importance because are easily accessible in dental setting. The less explored hydrogen peroxide could be a valuable alternative for silicone impressions disinfection.
Disinfectants ; Disinfection ; Hand ; Humans ; Hydrogen Peroxide ; Immersion ; Methods ; Silicon ; Silicone Elastomers ; Silicones ; Sodium Hypochlorite ; Students, Dental ; Volunteers ; Water