This study aimed to introduce a minimally invasive technique for maxillary sinus floor elevation using the lateral approach (lSFE) and to determine the factors that influence the stability of the grafted area in the sinus cavity. Thirty patients (30 implants) treated with lSFE using minimally invasive techniques from 2015 to 2019 were included in the study. Five aspects of the implant (central, mesial, distal, buccal, and palatal bone heights [BHs]) were measured using cone-beam computed tomography (CBCT) before implant surgery, immediately after surgery (T0), 6 months after surgery (T1), and at the last follow-up visit (T2). Patients' characteristics were collected. A small bone window (height, (4.40 ± 0.74) mm; length, (6.26 ± 1.03) mm) was prepared. No implant failed during the follow-up period (3.67 ± 1.75) years. Three of the 30 implants exhibited perforations. Changes in BH of the five aspects of implants showed strong correlations with each other and BH decreased dramatically before second-stage surgery. Residual bone height (RBH) did not significantly influence BH changes, whereas smoking status and type of bone graft materials were the potentially influential factors. During the approximate three-year observation period, lSFE with a minimally invasive technique demonstrated high implant survival rate and limited bone reduction in grafted area. In conclusion, lSFE using minimally invasive techniques was a viable treatment option. Patients who were nonsmokers and whose sinus cavity was filled with deproteinized bovine bone mineral (DBBM) had significantly limited bone resorption in grafted area.
Humans ; Animals ; Cattle ; Maxillary Sinus/surgery* ; Retrospective Studies ; Sinus Floor Augmentation ; Bone Resorption ; Cone-Beam Computed Tomography

Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height; however, this surgery is commonly complicated by Schneiderian membrane perforation, which is closely related to anatomical factors. This article aimed to assess anatomical factors on successful augmentation procedures. After review of the current evidence on sinus augmentation techniques, anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed. Schneiderian membrane perforation might occur when local tension exceeds its stretching potential, which is closely related to anatomical variations of the maxillary sinus. Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane. In addition to the residual bone height, clinicians should also consider the stretching potential affected by the membrane health condition, the contours of the maxillary sinus, and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.
Sinus Floor Augmentation ; Decision Trees

OBJECTIVES: This study aims to evaluate the endo-sinus bone remodeling of dental implants placed via osteotome sinus floor elevation (OSFE) after 6 months and using different implant protrusion lengths and bone grafts through cone beam computed tomography (CBCT). METHODS: Ninety-six patients with 124 implants were included and assigned into four groups. Group 1: implant protrusion length<4 mm with bone graft; group 2: implant protrusion length>4 mm with bone graft; group 3: implant protrusion length<4 mm without bone graft; group 4: implant protrusion length>4 mm without bone graft. Apical bone gain (ABG), cortical bone gain (CBG), bone density gain (BDG), and marginal bone loss (MBL) were observed and analyzed at baseline and 6 months after implant surgery. RESULTS: The CBG in grafted groups 1 and 2 was higher than that in non-grafted groups. The ABG and BDG were higher in non-grafted groups 3 and 4 than in grafted groups, and the levels in group 3 were higher than those in group 4. The CBG in grafted group 2 was higher than that in group 1. No significant difference was observed in MBL analysis. CONCLUSIONS The BDG of IPL<4 mm implants was higher than IPL>4 mm implant when bone grafts were not applied. No relevance was observed between IPL and CBG. Bone grafts can accelerate endo-sinus bone remodeling by increasing CBG and dissipating the influence of IPL on BDG.
Dental Implantation, Endosseous ; Dental Implants ; Humans ; Maxilla/surgery* ; Retrospective Studies ; Sinus Floor Augmentation ; Treatment Outcome

OBJECTIVE: To investigate the change of endo-sinus bone height and bone volume in osteotome sinus floor elevation (OSFE) without bone graft but placing implants simultaneously by using cone beam computed tomography (CBCT) and three dimensional analysis, and to find the impacting factors on endo-sinus bone augmentation. METHODS: OSFE was performed in 38 edentulous patients with missing teeth at posterior maxillary region, and 44 implants were placed and referred for OSFE using no graft materials. CBCT was performed pre-surgery and 9－68 months post-surgery when the patients encountered another implant surgery. The gained bone height at mesial, distal, buccal and palatal sites around the implant in sinus were measured, volumetric measurements of the endo-sinus gained bone volume (ESGBV) in the elevated region were calculated by Mimics software. Univariate analysis and multiple linear regression were performed to investigate the impacting factors on the gained bone height and ESGBV. Marginal bone loss was recorded according to the periapical radiography after implant restoration. RESULTS: The mean residual bone height (RBH) pre-surgery was (3.41±1.23) mm, the mean protruded length (PL) into sinus of implant post-surgery was (3.41±1.28) mm, the mean endo-sinus gained bone height was (2.44±1.23) mm at distal sites, (2.88±1.20) mm at mesial sites, (2.83±1.22) mm at buccal sites and (2.96±1.16) mm at palatal sites, the mean endo-sinus gained bone height at distal sites was significantly lower than the other three sites (P < 0.05). The average endo-sinus gained bone height was (2.78±1.13) mm. The mean ESGBV was (122.15± 73.27) mm³. Univariate analysis showed the more RBH, the less bone height gained in sinus, which existed at buccal, lingual, mesial and distal sites (P < 0.001), and the more RBH, the smaller ESGBV gained (P=0.012). The ESGBV was significantly higher in the subjects whose bone generation period was more than 24 months than those whose bone generation period less than 24 months (P=0.034). The more PL, the more bone height and ESGBV gained (P=0.008). Multivariate analysis showed after adjusting factors of gender, age, smoking, width of sinus floor, thickness of sinus membrane pre-surgery, diameter and length of the implant, PL and bone generation period was positively correlated with mean endo-sinus gained bone height and ESGBV, while RBH negatively correlated with mean endo-sinus gained bone height. During the follow-up, the mean marginal bone loss was 0 (0－1.41) mm and all the implants loaded successfully. CONCLUSION OSFE without bone graft but with placed implant simultaneously can increase endo-sinus gained bone height and ESGBV. RBH, PL and bone generation period are the significant factors impacting endo-sinus bone augmentation.
Bone Transplantation ; Dental Implantation, Endosseous ; Dental Implants ; Humans ; Maxilla/surgery* ; Osteotomy ; Radiography ; Sinus Floor Augmentation ; Treatment Outcome

Vertical bone insufficiency in the maxillary posterior teeth is a common clinical situation. At present, the bone insufficiency in the maxillary posterior teeth is mainly overcome by bone grafting through maxillary sinus floor elevation. Compared with traditional axial implantation, tilted implantation can better avoid bone grafting, reduce complications, shorten the treatment cycle, reduce the treatment cost for patients, and gradually be promoted in clinical settings. This article reviews the concept, biomechanics, clinical evaluation, and digital trend of tilted implants of maxillary posterior teeth.
Dental Implantation, Endosseous ; Dental Implants ; Dental Prosthesis Design ; Humans ; Maxilla ; Maxillary Sinus ; Sinus Floor Augmentation

OBJECTIVE: To investigate the effect of three anatomical parameters (maxillary sinus width, maxillary sinus angle, and residual bone height) on the outcomes of transcrestal sinus lift with simultaneous implant placement. METHODS: A total of 60 maxillary sinuses in 42 patients were included in this study. All patients were treated with transcrestal sinus lift procedure associated with simultaneous implant placement using a composite graft material of autogenous bone and Bio-Oss. For each patient, beam computed tomography (CBCT) scans were performed preoperatively, immediately after surgery, and 6 months after surgery. The parameters were measured on the preoperative and postoperative CBCT images. The correlation of three anatomical parameters with graft resorption was analyzed using Pearson's correlation test. RESULTS: The average residual bone height was (4.46±1.55) mm. The average width of maxillary sinus was (13.86±2.71) mm. The average sinus angle was 78.09°±10.27°. A significant positive correlation was observed between maxillary sinus width and graft resorption (P<0.01). A positive association was also found between sinus angle and graft resorption (P<0.01). CONCLUSIONS The findings show that graft bone resorption in elevated sinus has a positive correlation with the sinus width and sinus angle.
Bone Resorption ; Dental Implantation, Endosseous ; Dental Implants ; Humans ; Maxillary Sinus/surgery* ; Sinus Floor Augmentation ; Tomography, X-Ray Computed

OBJECTIVE: To explore the changes in bone height of the maxillary sinus floor at different sinus ridge heights after transcrestal sinus floor elevation (tSFE) with the simultaneous implantation of short implants. METHODS: A total of 74 Bicon short implants were implanted into 37 patients during the same period of maxillary sinus elevation. The residual bone height (RBH)<4 mm group has 43 sites, and the RBH≥4 mm group has 31 sites. After 5 years of follow-up observation, the implant survival rate and the change in bone height achieved in the maxillary sinus over time were measured and analyzed via clinical examination and X-ray imaging. RESULTS: In the 74 implantation sites, the elevation height of the sinus floor was (6.64±1.32) mm and the bone height of the sinus floor was (3.35±1.29) mm 5 years after loading. No statistical difference was observed in the bone resorption of the implant neck between the RBH<4 mm and RBH≥4 mm groups. Meanwhile, a statistical difference was noted in the bone height obtained in the maxillary sinus between the two groups. CONCLUSIONS When RBH in the maxillary posterior tooth area was <4 mm, the simultaneous implantation of Bicon short implants with tSFE can achieve a high implant survival rate and bone gain in the maxillary sinus, but does not increase the absorption of the alveolar ridge bone.
Dental Implantation, Endosseous ; Dental Implants ; Humans ; Maxilla ; Maxillary Sinus/surgery* ; Retrospective Studies ; Sinus Floor Augmentation ; Treatment Outcome

Maxillary sinus cystic lesions can often be found in cone-beam computed tomography (CBCT) images. However, whether this change affects the implementation of maxillary sinus floor augmentation remains unclear. Combining the common cystic change performance of CBCT, image classification diagnosis of maxillary sinus cystic change was introduced, and the indications and surgical methods of maxillary sinus floor augmentation and postoperative radiographic changes of mucous were analyzed. This procedure may help clinicians evaluate the feasibility and methods of maxillary sinus augmentation in maxillary sinus cystic changes.
Cone-Beam Computed Tomography ; Maxilla ; Maxillary Sinus ; Sinus Floor Augmentation

OBJECTIVE: To evaluate the long-term clinical outcomes of two-stage closed sinus lift for the maxillary sinus with residual bone height (RBH) of 1-3 mm in the posterior maxillary. METHODS: Seventy-eight patients with maxillary posterior tooth loss (1 mm≤RBH≤3 mm and alveolar ridge width ≥5 mm) were treated with two-stage closed sinus lift at the Dental Implantation Center of our hospital between March, 2012 and December, 2014. Coral hydroxyapatite powder and 148 implants were implanted. The superstructure was fixed within 6 months after the operation and the patients were followed up for 1-5 years for assessing the patients' satisfaction, postoperative response, stability and survival rates of the implant, soft tissue condition, bone height of maxillary sinus floor elevation and the marginal bone loss. RESULTS: Perforation of the maxillary sinus floor occurred in 3 (3.85%) of the cases. Twenty-three (30.67%) patients complained of mild pain, and 52 (69.33%) did not experience headache or fever or reported obvious pain or swelling after the operation. The overall response to the operation was favorable. The ISQ value was 58.39±1.39 immediately after the operation, and increased significantly to 81.88±1.22 at 6 months ( < 0.05). During the healing period and the follow-up, none of the implants fell off, and the implant survival rate was 100%. The peri-implant probing depth and modified sulcus bleeding index at 1 year after sinus lifting were similar to those at 5 years after the operation ( > 0.05), but the sinus floor elevation and marginal bone resorption at the two time points differed significantly ( < 0.05). CONCLUSIONS Compared with lateral wall lifting, two-stage close lifting of the maxillary sinus floor is associated with less trauma and less discomfort, and effectively solves the problem of severe alveolar bone height deficiency in the maxillary posterior region to achieve favorable long-term clinical outcomes.
Bone Resorption ; Dental Implantation, Endosseous ; Follow-Up Studies ; Humans ; Maxilla ; Maxillary Sinus ; Sinus Floor Augmentation ; Treatment Outcome

PURPOSE: To determine the benefits of autogenous tooth bone (ATB) graft in combination with platelet-rich plasma (PRP) in the rates of success and survival of dental implants placed simultaneously with maxillary sinus floor augmentation (MSFA). MATERIALS AND METHODS: Patients who visited the Department of Oral and Maxillofacial Surgery at Ulsan University Hospital from 2012 to 2014 and underwent simultaneous placement of implants with MSFA using ATB plus PRP were included in the study. Success and survival rates of the implants were evaluated based on the parameters of age and sex of the patient, site, follow-up period, residual bone height before surgery, diameter, and length of implant, sinus mucosa impairment, and postoperative complications. RESULT: A total of 23 patients and 67 implants were included in this study. The average age of the patients was 53.78±10.00 years. The average follow-up period after installation of the prosthesis was 53±5 months. The success and survival rates of the implants after placement of prosthesis were 95.52% and 97.01%, respectively. CONCLUSION: Combination of ATB and PRP showed high overall success rate, and it can be concluded that this combination is a predictable bone graft procedure for MSFA.
Bone Substitutes ; Dental Implantation ; Dental Implants ; Follow-Up Studies ; Humans ; Maxillary Sinus ; Mucous Membrane ; Platelet-Rich Plasma ; Postoperative Complications ; Prostheses and Implants ; Sinus Floor Augmentation ; Surgery, Oral ; Survival Rate ; Tooth ; Transplants ; Ulsan