OBJECTIVE: Recent studies have overturned the traditional concept of the lung as a "sterile organ" revealing that pulmonary microbiota dysbiosis and abnormal surfactant proteins (SPs) expression are involved in the progression of silicosis. This study aimed to investigate the relationship between abnormal SPs expression and dysbiosis of lung microbiota in silica-induced lung fibrosis, providing insights into mechanisms of silicosis. METHODS: Lung pathology, SPs expression, and microbiota composition were evaluated in silica-exposed mice. A mouse model of antibiotic-induced microbiota depletion was established, and alveolar structure and SPs expression were assessed. The roles of the lung microbiota and SPs in silicosis progression were further evaluated in mice with antibiotic-induced microbiota depletion, both with and without silica exposure. RESULTS: Silica exposure induced lung inflammation and fibrosis, along with increased expression of SP-A expression. Antibiotics (Abx)-induced microbiota depletion elevated SP-A and SP-D expression. Furthermore, silica exposure altered lung microbiota composition, enriching potentially pathogenic taxa. However, antibiotic-induced microbiota depletion prior to silica exposure reduced silica-mediated lung fibrosis and inflammation. CONCLUSION Lung microbiota is associated with silica-induced lung injury. Overproduction of SP-A and SP-D, induced by Abx-induced microbiota depletion, may enhance the resistance of mouse lung tissue to silica-induced injury.
Animals ; Silicosis/prevention & control* ; Lung/metabolism* ; Mice ; Anti-Bacterial Agents/pharmacology* ; Microbiota/drug effects* ; Silicon Dioxide/toxicity* ; Mice, Inbred C57BL ; Male ; Pulmonary Surfactant-Associated Proteins/genetics*

OBJECTIVES: Calcium silicate (CSO) is modified to give it photothermal antibacterial properties. Its application potential in tooth mineralization and oral antibacterial is evaluated. METHODS: Based on defect-engineering modification strategy, a series of CSO-T samples (CSO-300, CSO-400, CSO-500, CSO-600) was obtained by introducing oxygen vacancy into CSO through thermal reduction using sodium borohydride. The samples were tested using scanning electron microscopy (SEM), X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet near-infrared absorption spectroscopy, and infrared thermography. The powder samples with the best photothermal performance and the most suitable material concentration (CSO-500, 500 μg/mL) were selected for subsequent experiments. High resolution transmission electron microscopy was used to analyze the microstructure and morphology of the sample, and MTT assay and Calcein AM/PI live/dead cell staining were used to evaluate the toxicity and compatibility of the sample to human oral keratinocytes. Escherichia coli and Staphylococcus aureus were selected for photothermal antibacterial experiments to evaluate their in vitro antibacterial performance. SEM, energy dispersive spectrometer, and micro Vickers hardness tester were used to evaluate the ability of materials to induce in vitro remineralization of detached teeth. RESULTS: Oxygen vacancies changed the crystal type and lattice spacing of CaSiO₃, broadened the light-absorption range, and gave it a good photothermal conversion ability in response to near infrared. Invitro experiments showed that the modified CaSiO₃ could promote the formation of hydroxyapatite on the tooth surface, thereby promoting the remineralization of teeth and improving the teeth hardness. Moreover, it had photothermal antibacterial properties and no cytotoxicity. CONCLUSIONS Defect-modified black calcium silicate has multiple functions, such as promoting tooth remineralization and photothermal bacteriostatic. When combined with the infrared luminescent toothbrush, it can simply and effectively treat tooth enamel erosion and oral bacteriostatic diseases caused by the excessive consumption of carbonated beverages and other daily bad living habits. This combination is expected to achieve the synergic treatment effect of tooth remineralization and oral bacteriostatic through daily cleaning is expected.
Calcium Compounds/pharmacology* ; Silicates/pharmacology* ; Humans ; Staphylococcus aureus/drug effects* ; Tooth Remineralization ; Escherichia coli/drug effects* ; Anti-Bacterial Agents/pharmacology* ; Keratinocytes/drug effects* ; Microscopy, Electron, Scanning

Humans ; Nutrition Assessment ; Prognosis ; Silicosis/prevention & control* ; Occupational Diseases ; China/epidemiology* ; Occupational Exposure ; Silicon Dioxide

The chemical compositions of Rodgersia aesculifolia were isolated and purified using a combination of silica gel, reverse phase silica gel, Sephadex LH-20 column chromatography, and semi-preparative HPLC. The structures were determined according to the physicochemical properties and spectroscopic data. The MTT method and the ABTS kit were used to measure the cytotoxicity and antioxidant capacity of all isolates, respectively. Thirty-four compounds were isolated from R. aesculifolia and elucidated as stigmastane-6β-methoxy-3β,5α-diol(1), stigmastane-3β,5α,6β triol(2), β-sitosterol(3), β-daucosterol(4), stigmast-4-en-3-one(5), bergenin(6), 11-β-D-glucopyranosyl-bergenin(7), 11-O-galloybergenin(8), 1,4,6-tri-O-galloyl-β-D-glucose(9), gallic acid(10), 3,4-dihydroxybenzoic acid methyl ester(11), ethyl gallate(12), ethyl 3,4-dihydroxybenzoate(13), caffeic acid ethyl ester(14), p-hydroxybenzeneacetic acid(15), 4-hydroxybenzoic acid(16), 2,3-dihydroxy-1-(4-hydroxy-3-methoxyphenyl)-propan-1-one(17), 3,7-dimethyl-2-octene-1,7-diol(18), crocusatin-B(19), neroplomacrol(20), geniposide(21), 3-hydroxyurs-12-en-27-oic acid(22), 3β-trans-p-coumaroyloxy-olean-12-en-27-oic acid(23), aceriphyllic acid G(24), isolariciresinol(25), trans-rodgersinine B(26), cis-rodgersinine A(27), neo-olivil(28),(7S,8R)-dihydro-3'-hydroxy-8-hydroxy-methyl-7-(4-hydroxy-3-methoxy phenyl)-1'-benzofuranpropanol(29), 5,3',4'-trihydroxy-7-methoxyflavanone(30), quercetin 3-rutinoside(31), catechin-[8,7-e]-4β-(3,4-dihydroxy-phenyl)-dihydro-2(3H)-pyranone(32), ethyl α-L-arabino-furanoside(33), and l-linoleoylglycerol(34). One new compound was discovered(compound 1), 25 compounds were first isolated from R. aesculifolia, and 22 compounds were first isolated from the Rodgersia plant. The results indicated that compounds 22-24 possessed cytotoxicity for HepG2, MCF-7, HCT-116, BGC-823, and RAFLS cell lines(IC_(50) ranged from 5.89 μmol·L~(-1) to 20.5 μmol·L~(-1)). Compounds 8-14 and 30-32 showed good antioxidant capacity, and compound 9 showed the strongest antioxidant activity with IC_(50) of(2.00±0.12) μmol·L~(-1).
Antioxidants/analysis* ; Silica Gel/analysis* ; Plant Roots/chemistry*

The α-amino acid ester acyltransferase (SAET) from Sphingobacterium siyangensis is one of the enzymes with the highest catalytic ability for the biosynthesis of l-alanyl-l-glutamine (Ala-Gln) with unprotected l-alanine methylester and l-glutamine. To improve the catalytic performance of SAET, a one-step method was used to rapidly prepare the immobilized cells (SAET@ZIF-8) in the aqueous system. The engineered Escherichia coli (E. coli) expressing SAET was encapsulated into the imidazole framework structure of metal organic zeolite (ZIF-8). Subsequently, the obtained SAET@ZIF-8 was characterized, and the catalytic activity, reusability and storage stability were also investigated. Results showed that the morphology of the prepared SAET@ZIF-8 nanoparticles was basically the same as that of the standard ZIF-8 materials reported in literature, and the introduction of cells did not significantly change the morphology of ZIF-8. After repeated use for 7 times, SAET@ZIF-8 could still retain 67% of the initial catalytic activity. Maintained at room temperature for 4 days, 50% of the original catalytic activity of SAET@ZIF-8 could be retained, indicating that SAET@ZIF-8 has good stability for reuse and storage. When used in the biosynthesis of Ala-Gln, the final concentration of Ala-Gln reached 62.83 mmol/L (13.65 g/L) after 30 min, the yield reached 0.455 g/(L·min), and the conversion rate relative to glutamine was 62.83%. All these results suggested that the preparation of SAET@ZIF-8 is an efficient strategy for the biosynthesis of Ala-Gln.
Escherichia coli/genetics* ; Glutamine ; Zeolites/chemistry* ; Amino Acids

Objective: Differential flora and differential metabolites shared by the intestinal and respiratory tracts of rats were screened to analyze the possible role of changes in intestinal flora and metabolites in the progression of pneumoconiosis in rats. Methods: In April 2020, 18 SD rats were randomly divided into three groups (control group, coal mine dust group and silica group, 6 in each group) , rats in the coal mine dust group and silica group were perfused with 1 ml of 50 mg/ml coal mine well dust suspension and silica suspension by nontracheal exposure, respectively. While rats in the control group were perfused with an equal dose of sterilized normal saline. Twenty four weeks after dust staining, rat feces, throat swabs, and lung lavages were collected. 16SrDNA gene sequencing and UHPLC-QTOF-MS untargeted metabolomics were used to analyze the flora and metabolites in feces, throat swabs and lung lavage fluid of rats in each group, to screen for shared differential flora and shared differential metabolites in intestinal and respiratory tract, and the correlation analysis between the differential flora and metabolites was performed using Spearman's statistics. Results: Compared with the control group, a total of 9 species shared differential flora between intestinal and respiratory tract were screened at phylum level, and a total of 9 species shared differential genus between intestinal and respiratory tract were screened at genus level in the coal mine dust group, mainly Firmicutes, Actinobacteria, Streptococcus, Lactobacillus, etc. Compared with the control group, a total of 9 shared differential flora were screened at the phylum level, and a total of 5 shared differential genus were screened at the genus level in the silica group, mainly Proteobacteria, Actinobacteria, Allobactera, Mucilaginibacter, etc. Compared with the control group, a total of 7 shared differential metabolites were screened for up-regulation of Stigmatellin, Linalool oxide and Isoleucine-leucine in both intestinal and respiratory tract in the coal mine dust group. Compared with the control group , a total of 19 shared differential metabolites werescreened in the silica group, of which Diethanolamine, 1-Aminocyclopropanecarboxylic acid, Isoleucine-leucine, Sphingosine, Palmitic acid, D-sphinganine, 1, 2-dioleoyl-sn-glycero-3-phosphatidylcholine, and 1-Stearoyl-2-oleoyl-sn-glycerol 3-phosphocholine were up-regulated in both the intestinal and respiratory tract. Conclusion: There is a translocation of intestinal and respiratory flora in pneumoconiosis rats, and rats have an imbalance of lipid metabolism during the progression of pneumoconiosis.
Rats ; Animals ; Isoleucine ; Leucine ; Coal Mining ; Rats, Sprague-Dawley ; Pneumoconiosis ; Dust/analysis* ; Silicon Dioxide ; Coal

OBJECTIVE: To explore the influence of the thickness of mixed cardboard on the compressive strength of glass ionomer cement and the associated factors. METHODS: Three different types of glass ionomer cements were mixed on the top of 60, 40, 20 and 1 pieces of paper (P60, P40, P20 and P1), respectively. The compressive strength of the materials was tested after solidification, and the bubble rate was calculated with the assistance of scanning electron microscope. RESULTS: (1) Compressive strength: ① ChemFil Superior glass ionomer (CF): The average compressive strength of P1 group was the highest, which was significantly different from that of P40 and P60 groups (P values were 0.041 and 0.032 respectively); ② To Fuji IX GP glass ionomer (IX): The average compressive strength of P1 group was the highest, which was statistically different from that of P40 and P60 groups (P values were 0.042 and 0.038 respectively); ③ Glaslonomer FX-Ⅱ glass ionomer cement (FX): The average compressive strength of P1 group was the highest, which was statistically different from that of P20, P40 and P60 groups (P values were 0.031, 0.040 and 0.041 respectively), but there was no statistical difference among the other groups. All the three materials showed that the compressive strength of glass ions gradually increased with the decrease of the thickness of the blended paperboard, and the two materials had a highly linear negative correlation, the correlation coefficients of which were CF-0.927, IX-0.989, FX-0.892, respectively. (2) Scanning electron microscope: P1 group had the least bubbles among the three materials. CONCLUSION It indicates that the thickness of mixed cardboard has a negative correlation with the compressive strength of glass ions. The thicker the mixed cardboard is, the greater the elasticity is. Excessive elasticity will accelerate the mixing speed when the grinding glass ions. Studies have shown that the faster the speed of artificial mixing is, the more bubbles is produced.The thicker ther mixed cardboard is, the more bubblesn are generated by glass ionomer cement, and the higher the compressive strength is. Using one piece of paper board to mix glass ionomer cement has the least bubbles and can obtain higher compressive strength.
Compressive Strength ; Materials Testing ; Glass Ionomer Cements ; Silicon Dioxide

OBJECTIVE: To investigate the effects of novel bioactive glasses (BG) including PSC with high phosphorus component and FBG with fluorine-doped element on promoting remineralization of artificial dentin caries. METHODS: (1) BGs were used in this study as follows: PSC (10.8%P₂O₅-54.2%SiO₂-35.0%CaO, mol.%) were synthesized using phytic acid as the phosphorus precursor through sol-gel method. FBG (6.1%P₂O₅-37.0%SiO₂-53.9%CaO-3.0%CaF₂, mol.%) and 45S5(6.0%P₂O₅-45.0%SiO₂-24.5%CaO-24.5%Na₂O, mol.%) were synthesized by traditional melt method. (2) The above BGs were soaked in simulated body fluid (SBF) for 24 hours. Then X-ray diffraction (XRD) was used to analyze the formation of hydroxyapatite (HA) crystals. (3) Prepared 1 mm thick dentin slices were soaked in 17% ethylene diamine tetraacetic acid (EDTA) for 1 week to demineralize the dentin. Then the dentin slices treated by BG were soaked in SBF for 1 week. Field emission scanning electron micro-scopy (FE-SEM) was used to observe the surface morphology of the dentin slices. (4) Four cavities were prepared to 1 mm depth in each 2 mm thick dentin slice, then were treated with lactic acid for 2 weeks to form the artificial dentin caries. Wax, mineral trioxide aggregate (MTA), PSC and FBG were used to fill four cavities as blank control group, MTA group, PSC group and FBG group respectively. Then the spe-cimens were soaked in SBF for 4 weeks. The changes of depth and density of demineralized dentin were analyzed using Micro-CT before filling and after 2 and 4 weeks filling. RESULTS: (1) PSC and FBG promoted mineral formation on the surfaces of the demineralized dentin. And the speed was faster and crystallinity was higher in PSC group than the FBG and 45S5 groups. (2) The increased mineral density of artificial dentin caries in PSC group were (185.98 ± 55.66) mg/cm³ and (213.64 ± 36.01) mg/cm³ 2 and 4 weeks after filling respectively, which were significantly higher than the control group [(20.38 ± 7.55) mg/cm³, P=0.006; (36.46 ± 10.79) mg/cm³, P=0.001]. At meanwhile, PSC group was also higher than MTA group [(57.29 ± 10.09) mg/cm³; (111.02 ± 22.06) mg/cm³], and it had statistical difference (P=0.015; P=0.006). The depth of remineralized dentin in PSC group were (40.0 ± 16.9) μm and (54.5 ± 17.8) μm 2 and 4 weeks respectively, which were also statistically different from the control group (P =0.010;P=0.001). There were no statistical differences between the control group and MTA group. The above effects of FBG group were between PSC and MTA. CONCLUSION PSC has advantages in the speed, quality and depth of mineral deposition in the demineralized layer of artificial dentin caries. It would be expected to be an ideal material to promote the remineralization of dentin caries.
Dentin ; Silicon Dioxide/pharmacology* ; Dental Caries Susceptibility ; Minerals/pharmacology* ; Phosphorus/pharmacology* ; Tooth Remineralization/methods*

OBJECTIVE: To compare the clinical effects of pulpotomy with two kinds of calcium silicate materials, and to evaluate the formation of dentin bridge and pulp calcification after pulpotomy of adult permanent teeth. METHODS: Patients who visited the General Department of Peking University School and Hospital of Stomatology from November 2017 to September 2019 and planned for pulpotomy on permanent premolars and molars with carious exposed pulp were selected. They were randomly divided into two groups. Bioceramic putty material iRoot BP (iRoot group, n=22) and mineral trioxide aggregate MTA (MTA group, n=21) were used as pulp capping agents, respectively. The patients were recalled after one year and two years. The clinical efficacy, dentin bridge index (DBI) and pulp calcification index (PCI) were recorded. Blinding method was used for the patients and evaluators. RESULTS: There was no significant difference in gender, mean age, dentition and tooth position between the two groups (P>0.05). Seven cases were lost during the first year (4 cases in iRoot group and 3 cases in MTA group). In the iRoot group, 1 case had transient sensitivity at the time of 1-year follow-up. The cure rate of the two groups was 100% at the time of 2-year follow-up. The proportion of dentin bridge formation was 38.9% one year after operation, 55.6% two years after operation. The proportion of partial or even complete disappearance of root canal image was 5.6% before operation, 38.9% and 55.6% one and two years after operation, respectively. The difference was statistically significant by rank sum test (P < 0.05). There was no significant difference in dentin bridge formation and pulp calcification between the two groups (P < 0.05). DBI and PCI after operation was as the same as those before operation (44.4% cases of DBI and 25% cases of PCI) or gradually increased (55.6% cases of DBI and 75% cases of PCI). Spearman's nonparametric correlation analysis showed that age was positively correlated with preoperative pulp calcification index (PCI0, P < 0.05), but not with the dentin bridge index (DBI1, DBI2), pulp calcification index (PCI1, PCI2) and the degree of change (DBI2 vs. DBI1, PCI1 vs. PCI0, PCI2 vs. PCI0) 1-year and 2-year after operation (P>0.05). CONCLUSION According to this study, good clinical effects were obtained within 2-year after pulpotomy of adult permanent teeth with MTA and iRoot. In some cases, the root canal system had a tendency of calcification aggravation, and there was no statistical difference in the development of this trend between the two groups.
Humans ; Adult ; Pulpotomy/methods* ; X-Rays ; Calcium Compounds/therapeutic use* ; Dentition, Permanent ; Molar/surgery* ; Treatment Outcome ; Silicates/therapeutic use* ; Aluminum Compounds/therapeutic use* ; Oxides ; Drug Combinations ; Dental Pulp Capping

OBJECTIVE: To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application. METHODS: Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05). RESULTS: The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05). CONCLUSION The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.
Humans ; Silicon ; Materials Testing ; Friction ; Lithium ; Cicatrix ; Surface Properties ; Silicon Dioxide ; Zirconium/chemistry* ; Ceramics ; Dental Porcelain