Silicon-based microring resonator (SMRR), as a typical application of label-free detection in optical biosensors, performs advantages such as small size, high sensitivity, and ease of integration, making it suitable for detecting physical, chemical, and biological signals. Alzheimer's disease (AD) is a common neurodegenerative disorder with high concealment, while early intervention can effectively slow its progression. For early diagnosis of AD, optical detection platforms based on SMRR can effectively overcome the challenges posed by low-abundance biomarkers and interfering factors in blood screening, demonstrating the potential for ultra-sensitive detection with low false positives. However, the clinical application of SMRR in AD detection is currently limited due to significant differences in optimized designs, the lack of commercial off-the-shelf chips and unified detection platforms, and high costs. Additionally, the biomarkers for early AD diagnosis are controversial, limiting their diagnostic utility. This paper reviews the sensing principles of SMRR and summarizes its research progress in the biomedical field. With AD as the research focus, we have discussed the main application limitations of SMRR-based detection technology and its clinical potential in early AD diagnosis. In the future, the standardization, integration, and universal applicability of silicon-based microring resonator technology may emerge as key development directions, aiming to develop mature commercial detection instruments and promote their widespread application in clinical diagnosis.
Silicon/chemistry* ; Biosensing Techniques/methods* ; Humans ; Alzheimer Disease/diagnosis* ; Biomarkers/analysis*

OBJECTIVE: To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application. METHODS: Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05). RESULTS: The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 μm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 μm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05). CONCLUSION The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.
Humans ; Silicon ; Materials Testing ; Friction ; Lithium ; Cicatrix ; Surface Properties ; Silicon Dioxide ; Zirconium/chemistry* ; Ceramics ; Dental Porcelain

Attapulgite(ATP), as a fertilizer slow-release agent and soil conditioner, has shown remarkable effect in improving the utilization rate of fertilizer and the yield and quality of agricultural products and Chinese medicinal materials. This study aims to explore the effect of ATP on the growth and root quality of Angelica sinensis. To be specific, Mingui 1 was used, and through the pot(soil culture) experiment in the Dao-di producing area, the effects of conventional chemical fertilizer added with ATP on the morphology, photosynthesis, soil respiration, and content of ferulic acid and volatile oil in roots of Mingui 1 were detected. The underlying mechanism was discussed from the perspective of source-sink relationship. The results showed that ATP, via the fertilizer slow-release effect, could meet the needs of A. sinensis for nutrients at the root expansion stage, improve the net photosynthetic rate of leaves and aboveground biomass of plants, and promote the transfer and accumulation of nutrients from the aboveground part(source) to the underground root(sink) in advance during the dry matter accumulation period of roots, so as to improve the root weight per plant. ATP can increase the content of total ferulic acid(the sum of free ferulic acid and coniferyl ferulate), the main effective component of Angelicae Sinensis Radix, by promoting the synthesis of ferulic acid in the roots and the transformation to coniferyl ferulate. However, it had little effect on the content of volatile oil. ATP had certain influence on soil respiration, which needs to be further explored from root activity, rhizosphere microorganisms, and soil microorganisms. This study can lay a basis for soil remediation and improvement and ecological cultivation of A. sinensis.
Adenosine Triphosphate ; Angelica sinensis/chemistry* ; Coumaric Acids ; Fertilizers/analysis* ; Magnesium Compounds ; Oils, Volatile/chemistry* ; Plant Roots/chemistry* ; Silicon Compounds ; Soil

The chemical constituents in Urtica dioica fruits were investigated by silica gel chromatography, preparative HPLC, NMR, and HR-MS for the first time. As a result, 21 compounds were isolated from the fruits of U. dioica and identified 7R,8S,8'R-olivil(1), oleic acid(2), α-linoleic acid(3), palmic acid(4), methyl palmitate(5), α-linolenic acid(6), α-linolenic acid methyl ester(7), 5-O-caffeoyl-shikimic acid(8), vanillic acid(9), p-coumaric acid(10), 5-O-p-coumaroylshikimic acid(11), cinnamic acid(12), quinic acid(13), shikimic acid(14), ethyl caffeate(15), coniferyl ferulate(16), ferulic acid(17), caffeic acid(18), chlorogenic acid(19), pinoresinol(20), and quercetin(21). Compound 1 was a new compound and compounds 2-16 were isolated from U. dioica for the first time.
Chlorogenic Acid ; Fruit ; Linoleic Acid ; Oleic Acid ; Quercetin/chemistry* ; Quinic Acid ; Shikimic Acid ; Silicon Dioxide ; Urtica dioica/chemistry* ; Vanillic Acid ; alpha-Linolenic Acid

Objective: To evaluate the effect of shear bond strength between resin cement and zirconia using SiO₂-ZrO₂ slurry coating. Methods: One hundred and forty pre-sintered zirconia discs were randomly divided into seven groups (n=20) according to the surface treatments: AS (as-sintered), SB (sand blasting with Al₂O₃), 2SiO₂-1ZrO₂ (2∶1 mole ratio SiO₂-ZrO₂ coating), 1SiO₂-1ZrO₂ (mole ratio 1∶1 SiO₂-ZrO₂ coating), 1SiO₂-2ZrO₂ (mole ratio 1∶2 SiO₂-ZrO₂ coating), 1SiO₂-3ZrO₂ (mole ratio 1∶3 SiO₂-ZrO₂ coating), 1SiO₂-4ZrO₂ (mole ratio 1∶4 SiO₂-ZrO₂ coating). Each zirconia disc was bonded to composite resin cylinder using resin cement. All specimens were stored in distilled water (37 ℃, 24 h). Each group was divided into two subgroups in which half specimens were tested using universal testing machine and another half specimens accepted artificial aging of 5 000 times thermocycling then tested. Scaning electron microscopy (SEM) was used to observe the micro-morphology of coating surface etched by hydrofluoric acid,then the coating thickness was measured. Results: Before artificial aging, 1SiO₂-1ZrO₂ showed a higher shear bond strength [(41.69±6.28) MPa] than all the other group (P<0.05). 1SiO₂-2ZrO₂ gained a higher strength than AS, SB, 1SiO₂-3ZrO₂ and 1SiO₂-4ZrO₂ (P<0.05). However, 1SiO₂-2ZrO₂ did not get a significant higher shear bond strength than 2SiO₂-1ZrO₂ (P>0.05). No significant differences were found among SB, 2SiO₂-1ZrO₂ and 1SiO₂-3ZrO₂ (P>0.05). After artificial aging, shear bond strength of all groups were decreased significantly besides 2SiO₂-1ZrO₂. 2SiO₂-1ZrO₂, 1SiO₂-1ZrO₂ and 1SiO₂-2ZrO₂ [(24.13±5.50), (22.28±4.40), (23.11±4.80) MPa] showed higher shear bond strength than SB and 1SiO₂-3ZrO₂ (P<0.05),no intergroup differences were observed (P>0.05). Shear bond strength of AS and 1SiO₂-4ZrO₂ fell to 0 MPa approximately. The SEM images of etched coating surface showed contraction fissure due to different thermal expansion coefficient between SiO₂ and ZrO₂ and intercrystal pores of zirconia. The thickness of coating was measured to be less than 30 μm. Conclusions: Mole ratio 1∶1 SiO₂-1ZrO₂ slurry coating showed the highest shear bond strength of resin cement to zirconia.
Dental Bonding ; Materials Testing ; Resin Cements/chemistry* ; Silicon Dioxide ; Surface Properties ; Zirconium

OBJECTIVETo study the effects of Astragalus polysaccharide (APS), the primary effective component of the Chinese herb medicine Astragalus membranaceus (frequently used for its anti-hepatic fibrosis effects), on nanoscale mechanical properties of liver sinusoidal endothelial cells (SECs).

METHODSUsing endothelial cell medium as the control, 5 experimental groups were established utilizing different concentrations of APS, i.e. 12.5, 25, 50, 100, and 200 μg/mL. By using atomic force microscopy along with a microcantilever modified with a silicon dioxide microsphere as powerful tools, the value of Young's modulus in each group was calculated. SAS 9.1 software was applied to analyze the values of Young's modulus at the pressed depth of 300 nm. Environmental scanning electron microscopy was performed to observe the surface microtopography of the SECs.

RESULTSThe value of Young's modulus in each APS experimental group was significantly greater than that of the control group: as APS concentration increased, the value of Young's modulus presented as an increasing trend. The difference between the low-concentration (12.5 and 25 μg/mL) and high-concentration (200 μg/mL) groups was statistically significant (P<0.05), but no significant differences were observed between moderateconcentration (50 and 100 μg/mL) groups versus low- or high-concentration groups (P>0.05). Surface topography demonstrated that APS was capable of increasing the total area of fenestrae.

CONCLUSIONSThe values of Young's modulus increased along with increasing concentrations of APS, suggesting that the stiffness of SECs increases gradually as a function of APS concentration. The observed changes in SEC mechanical properties may provide a new avenue for mechanistic research of anti-hepatic fibrosis treatments in Chinese medicine.

Animals ; Astragalus Plant ; chemistry ; Biomechanical Phenomena ; drug effects ; Elastic Modulus ; Endothelial Cells ; cytology ; ultrastructure ; Liver ; cytology ; Microscopy, Atomic Force ; Microspheres ; Nanotechnology ; Polysaccharides ; pharmacology ; Rats ; Silicon Dioxide ; chemistry ; Surface Properties

OBJECTIVEThe effect of the silica nanoparticles (SNs) on lungs injury in rats was investigated to evaluate the toxicity and possible mechanisms for SNs.

METHODSMale Wistar rats were instilled intratracheally with 1 mL of saline containing 6.25, 12.5, and 25.0 mg of SNs or 25.0 mg of microscale SiO2 particles suspensions for 30 d, were then sacrificed. Histopathological and ultrastructural change in lungs, and chemical components in the urine excretions were investigated by light microscope, TEM and EDS. MDA, NO and hydroxyproline (Hyp) in lung homogenates were quantified by spectrophotometry. Contents of TNF-α, TGF-β1, IL-1β, and MMP-2 in lung tissue were determined by immunohistochemistry staining.

RESULTSThere is massive excretion of Si substance in urine. The SNs lead pulmonary lesions of rise in lung/body coefficients, lung inflammation, damaged alveoli, granuloma nodules formation, and collagen metabolized perturbation, and lung tissue damage is milder than those of microscale SiO2 particles. The SNs also cause increase lipid peroxidation and high expression of cytokines.

CONCLUSIONThe SNs result into pulmonary fibrosis by means of increase lipid peroxidation and high expression of cytokines. Milder effect of the SNs on pulmonary fibrosis comparing to microscale SiO2 particles is contributed to its elimination from urine due to their ultrafine particle size.

Air Pollutants ; toxicity ; Animals ; Dose-Response Relationship, Drug ; Lung ; drug effects ; pathology ; ultrastructure ; Male ; Microscopy, Electron, Transmission ; Nanoparticles ; toxicity ; Pulmonary Fibrosis ; chemically induced ; metabolism ; pathology ; Random Allocation ; Rats ; Rats, Wistar ; Silicon Dioxide ; toxicity ; Specific Pathogen-Free Organisms ; Spectrometry, X-Ray Emission ; Urine ; chemistry

OBJECTIVETo investigate the effect of short and long term exposure to SiO2 nanoparticles on microRNA expression level in human bronchial epithelial cells(16HBE cells).

METHODSThe 16HBE cells were exposed to 5, 10, 15, 20, 25, 30 and 40 μg/ml SiO2 nanoparticles for 24 h to detect the cell viability by using CCK-8 assay. The inhibition rate of proliferation activity and half inhibitory concentration (IC50) were calculated. The 16HBE cells were exposed to 10 μg/ml SiO2 nanoparticles for 10 and 30 generations, named P10 and P30, and the control P0 was set. The cells were treated with SiO2 nanoparticles at 0, 1/4 IC50, 1/2 IC50 and IC50 concentration and μm-SiO2 at IC50 concentration for 24 h, and the control serum-free culture medium was set. Agilent miRNAs microarray chip was used to screen differentially expressed miRNAs in P10, P30 and P0 groups. The expression level of miRNA was detected by reverse transcription fluorescence quantitative polymerase chain reaction (qRT-PCR).

RESULTSThe inhibition rate of proliferation activity of 5, 10, 15, 20, 25,30,40 μg/ml group were (-3.33 ± 3.80)%, (20.40 ± 11.73)%, (39.08 ± 5.53)%, (55.10 ± 5.78)%, (66.42 ± 9.60)%, (71.67 ± 7.34)%, (81.43 ± 5.37)%, respectively; F=129.11, P<0.001. The IC50 (95%CI) was 18.35 (15.82-20.72) μg/ml. The expression level of miRNA-494-3p in P0, P10 and P30 were 1.00, 0.45 ± 0.08, 0.28 ± 0.07, respectively; F=60.77, P<0.001. miRNA-19a-3p were 1.00, 2.27 ± 0.45, 1.06 ± 0.19, respectively; F=30.05, P<0.001. miRNA-148b-3p were 1.00, 1.78 ± 0.29, 0.88 ± 0.19, respectively; F=30.23, P<0.001. Compared to control group, the expression level of miRNA-494-3p in 5, 10, 20 μg/ml SiO2 nanoparticles groups and 20 μg/ml μm-SiO2 group were 0.99 ± 0.04, 1.38 ± 0.19, 2.13 ± 0.14, 0.81 ± 0.25, respectively; F=57.03, P<0.001. miRNA-19a-3p were 0.91 ± 0.03, 1.12 ± 0.03, 0.53 ± 0.01, 0.86 ± 0.01, respectively; F=408.78, P<0.001. miRNA-148b-3p were 0.95 ± 0.02, 1.22 ± 0.00, 0.54 ± 0.02, 1.15 ± 0.04 respectively; F=264.14, P<0.001.

CONCLUSIONShort and long term exposure to SiO2 nanoparticles can affect the expression level of miRNAs in 16HBE cells. The expressions of miRNA-494-3p after long and short period exposure are different.

Cells, Cultured ; Epithelial Cells ; drug effects ; metabolism ; Humans ; MicroRNAs ; metabolism ; Nanoparticles ; chemistry ; Oligonucleotide Array Sequence Analysis ; Silicon Dioxide ; chemistry

Hot-melt extrusion was applied to prepare mesoporous silica/ethylcellulose mini-matrix for sustained release, and fenofibrate was used as a model drug, ethylcellulose and xanthan gum were chosen as sustained-release agent and releasing moderator, respectively. This novel matrix obtained the controlled release ability by combining mesoporous silica drug delivery system and hot-melt extrusion technology. And mesoporous silica particle (SBA-15) was chosen as drug carrier to increase the dissolution rate of fenofibrate in this martix. Scanning electron microscope, transmission electron microscope, small angle X-ray powder diffraction and N2 adsorption-desorption were introduced to determine the particle morphology, particle size and pore structure of the synthesized SBA-15. The results showed that SBA-15 had a very high Brunauer-Emmett-Teller specific surface area, a narrow pore size distribution, large pore volume and a ordered two-dimensional hexagonal structure of p6mm symmetry. Differential scanning calorimetry and X-ray powder diffraction results demonstrated that fenofibrate dispersed in an amorphous state inside the pores of the mesoporous silica which contributed to the improvement in the dissolution rate. The drug release of mini-matrices was influenced by ethylcellulose viscosity grades and xanthan gum concentration, which increased with the increasing of xanthan gum concentration and decreasing of ethylcellulose viscosity. Mini-matrix containing 22% xanthan gum exhibited a good sustained release performance, and the drug release behavior followed the first-order kinetics.
Adsorption ; Calorimetry, Differential Scanning ; Cellulose ; analogs & derivatives ; Delayed-Action Preparations ; Drug Carriers ; chemistry ; Particle Size ; Porosity ; Powder Diffraction ; Powders ; Silicon Dioxide ; Solubility ; X-Ray Diffraction

This paper is to prepare curcumin (Cur) loaded mesoporous silica nanoparticle (Cur-MSN), evaluate its release behavior and anti-cancer activity in vitro. Mesoporous silica nanoparticle (MSN) was prepared by polymerization method and Cur-MSN was obtained using solvent evaporation method and impregnation centrifugation method. The preparation method was optimized using entrapment efficiency (EE) and loading efficiency (LE) as indexes. Cur-MSN was characterized with scanning electron microscope and its particle size and zeta potential were determined. Finally, in vitro release behavior in 0.2% SDS solution and its cell-killing effect on HeLa cells were also evaluated. The Cur-MSN prepared with process optimization method was round and uniform and exhibited typical mesoporous characterization. The mean particle size and Zeta potential of Cur-MSN were 75.8 nm and -30.1 mV, respectively. EE and LE of three batches of Cur-MSN were (72.55 ± 2.01)% and (16.21 ± 1.12)%, respectively. In vitro release behavior of Cur-MSN showed a sustained release profile with 83.5% cumulative release within 96 h. The killing effect of Cur-MSN on HeLa cells was dose-dependent with IC50 of 19.40 mg x L(-1), which was similar to that of Cur.
Antineoplastic Agents, Phytogenic ; chemistry ; pharmacology ; Curcumin ; chemistry ; pharmacology ; Drug Carriers ; chemistry ; Drugs, Chinese Herbal ; chemistry ; pharmacology ; Humans ; Nanoparticles ; chemistry ; Neoplasms ; drug therapy ; Particle Size ; Porosity ; Silicon Dioxide ; chemistry