OBJECTIVES: This study aimed to compare the osteogenic performance differences of titanium surface coatings modified by dopamine or silanized graphene oxide, and to provide a more suitable modification scheme for titanium surface graphene oxide coatings. METHODS: Titanium was subjected to alkali-heat treatment and then modified with dopamine and silanization, respectively, followed by coating with graphene oxide. Control and experimental groups were designed as follows: pure titanium (Ti) group; titanium after alkali-heat treatment (Ti-NaOH) group; titanium after alkali-heat treatment and silanization modification (Ti-APTES) group; titanium after alkali-heat treatment and dopamine modification (Ti-DOPA) group; titanium with silanization-modified surface decorated with graphene oxide (Ti-APTES/GO) group; titanium with dopamine-modified surface decorated with graphene oxide (Ti-DOPA/GO) group. The physical and chemical properties of the material surfaces were analyzed using scanning electron microscopy (SEM), contact angle goniometer, X-ray photoelectron spectroscopy (XPS), and Raman spectrometer. The proliferation and adhesion morphology of mouse embryonic osteoblast precursor cells MC3T3-E1 on the material surfaces were observed by cell viability detection and immunofluorescence staining followed by laser confocal microscopy. The effects on the osteogenic differentiation of MC3T3-E1 cells were studied by alkaline phosphatase (ALP) staining, alizarin red staining and quantification, and real-time quantitative polymerase chain reaction. RESULTS: After modification with graphene oxide coating, a thin-film-like structure was observed on the surface under SEM. The hydrophilicity of all experimental groups was improved, among which the Ti-DOPA/GO group had the best hydrophilicity. XPS and Raman spectroscopy analysis showed that the modified materials exhibited typical D and G peaks, and XPS revealed the presence of a large number of oxygen-containing functional groups on the surface. CCK8 assay showed that all groups of materials had no cytotoxicity, and the proliferation level of the Ti-APTES/GO group was higher than that of the Ti-DOPA/GO group. Under the laser confocal microscope, the cells in the Ti-DOPA/GO and Ti-APTES/GO groups spread more fully. The Ti-DOPA/GO and Ti-APTES/GO groups had the deepest ALP staining, and the Ti-APTES/GO group had the most alizarin red-stained mineralized nodules and the highest quantitative result of alizarin red staining. In the Ti-DOPA/GO and Ti-APTES/GO groups, the expression of the early osteogenic-related gene RUNX2 reached a relatively high level, while in the expression of the late osteogenic-related genes OPN and OCN, the Ti-APTES/GO group performed better than the Ti-DOPA/GO group. CONCLUSIONS Ti-APTES/GO significantly outperformed Ti-DOPA/GO in promoting the adhesion, proliferation, and in vitro osteogenic differentiation of MC3T3-E1 cells.
Titanium/chemistry* ; Graphite/chemistry* ; Dopamine/chemistry* ; Animals ; Mice ; Osteogenesis ; Osteoblasts/cytology* ; Surface Properties ; Cell Proliferation ; Silanes/chemistry* ; Cell Adhesion ; Coated Materials, Biocompatible/chemistry* ; Cell Differentiation ; Alkaline Phosphatase/metabolism* ; Microscopy, Electron, Scanning

OBJECTIVE: To investigate the effect of interference of CTPS gene on toosendanin-induced apoptosis of gastric cancer MKN-45 cells. METHODS: Bioinformatic analysis was used to analyze CTPS gene expression in human gastric cancer tissues and the overall survival of gastric cancer patients with high CTPS gene expression. Human gastric cancer MKN-45 cells were transfected with a short hairpin interfering RNA targeting CTPS gene, and 48 h later, qRT-PCR and Western blotting were used to detect cellular expression CTPS at both the mRNA and protein levels. MKN-45 cells with CTPS knockdown were treated with 80 nmol/L toosendanin for 48 h, and the cell viability was assessed with MTT assay; the cell morphology was observed using laser confocal microscope, and the expression of γH2AX was detected with immunofluorescence assay. RESULTS: Bioinformatic analysis suggested that CTPS was highly expressed in human gastric cancer tissues, and gastric cancer patients with high CTPS gene expression had a shorter overall survival. MKN-45 cells transfected with Sh-CTPS interference vector showed significantly lowered cell survival rate (P < 0.01) with obvious cell shrinkage, irregular morphology, typical apoptotic changes, and increased cell apoptosis rate (P < 0.05). Treatment of the transfected cells with 80 nmol/L toosendanin for 48 h resulted in further reduction of the cell survival rate (P < 0.001), and the cells showed an increased apoptotic rate (P < 0.05) with appearance of apoptotic bodies. CONCLUSION Interference of CTPS gene can promote TSN-induced apoptosis of gastric cancer MKN-45 cells.
Apoptosis ; Cell Line, Tumor ; Humans ; RNA, Small Interfering/metabolism* ; Silanes ; Stomach Neoplasms/metabolism* ; Triterpenes

Cell Line, Tumor ; Drugs, Chinese Herbal ; Humans ; Silanes ; Stomach Neoplasms/drug therapy*

OBJECTIVE: To evaluate the microtensile bond strength of resin composite to glass ceramic, and the effect of surface treatment of resin composite and thermal cycling aging on the microtensile bond strength. METHODS: Rectangular blocks were made with dentin of extracted molars, resin composite or feldspathic glass ceramic respectively. The bonding surfaces of these rectangular blocks were sanded by 600-grit silicon carbide paper before luting. A self-etching resin cement was used as luting agent. The specimens were divided into groups according to the types of substrates of adhesion (dentin/glass ceramic or resin composite/glass ceramic), the way of surface treatments and whether thermal cycling aging ocurred. The dentin blocks were adhered to ceramic blocks as controls (group A1 and A2). The resin composite blocks were adhered to the ceramic blocks as experiment groups. The resin composite surfaces were treated by different ways before luting: no extra surface treatment (group B1 and B2), treated by ethyl methacrylate solution (group C1 and C2) or silane coupling agent (group D1 and D2), coarsened by 360-grit silicon carbide paper (group E1 and E2) or polished by 1 200-grit silicon carbide paper (group F1 and F2). After luting, the microtensile bond strength of the specimens were tested before (group A1-F1) or after (group A2-F2) thermal cycling aging. After microtensile bond strength test, the fracture bonding surfaces of the specimens were observed by a scanning electron microscopy to determine the type of bonding failure. The data were statistically analyzed using one-way analysis of variance. RESULTS: The microtensile bond strength of resin composite to glass ceramic with no extra treatment achieved high bond values before and after thermal cycling [B1 (30.02±3.85) MPa, B2 (26.83±3.14) MPa], which were statistically different from those of the control groups [A1 (20.55±4.51) MPa, A2 (12.94±0.69) MPa, P < 0.05]. The microtensile bond strength between the glass ceramic and resin composite did not increase after different surface treatments of resin composite. CONCLUSIONS The microtensile bond strength between resin composite and glass ceramic achieved as similar bond strength as that between dentin and glass ceramic and even better. Surface treatment of resin composite via methyl methacrylate solution, silane coupling agent, coarsening, or polishing did not increase the microtensile bond strength effectually.
Acid Etching, Dental ; Ceramics ; Composite Resins ; Dental Bonding ; Materials Testing ; Resin Cements ; Silanes ; Surface Properties ; Tensile Strength

A new, simple and sensitive method was developed for the determination of silicon tetrahydride in the air of workplace in this study. The alkaline resin-based spherical activated carbon was used to collect sample of silicon tetrahydride at workplace. Silicon tetrahydride was then desorbed from active carbon in 100°C hot water. After reacting with ammonium molybdate, oxalic acid and 1,2,4-trichlorobenzene alpha-naphthol amino sulfonic acid under acid condition, silicon tetrahydride was transformed into silicon molybdenum blue. The absorbance of silicon molybdenum blue was quantitatively measured at the wavelength of 680 nm. The results showed that the average sampling efficiency and desorption efficiency were 97.53% and 94.94%, respectively by this method. Detection limits were 0.054 μg/mL for the spectrophotometric method and 0.14 mg/m(3) for the determination of silicon tetrahydride in the air of workplace (sampling volume was 7.5 L). The conversion rate of silicon tetrahydride gradually decreased when storage time of samples was extended. The descent rate of sample was less than 10% when the sample was sealed for 7 days in the room temperature. It was concluded that this spectrophotometric method can be successfully used to determine silicon tetrahydride in the worksites.
Air Pollutants, Occupational ; analysis ; Humans ; Limit of Detection ; Reproducibility of Results ; Silanes ; analysis ; Spectrophotometry ; methods ; Workplace

The objective of this research is to evaluate the effects of different silane coupling agents on the bond strength between Ceramco3 opaque porcelain and indirect composite resin. Five groups of Co-Cr metal alloy substrates were fabricated according to manufacturer's instruction. The surface of metal alloy with a layer of dental opaque porcelain was heated by fire. After the surface of opaque porcelain was etched, five different surface treatments, i.e. RelyX Ceramic Primer (RCP), Porcelain Bond Activator and SE Bond Primer (mixed with a proportion of 1:1) (PBA), Shofu Porcelain Primer (SPP), SE bond primer (SEP), and no primer treatment (as a control group), were used to combine P60 and opaque porcelain along with resin cement. Shear bond strength of specimens was tested in a universal testing machine. The failure modes of specimens in all groups were observed and classified into four types. Selected specimens were subjected to scanning electron microscope and energy disperse spectroscopy to reveal the relief of the fracture surface and to confirm the failure mode of different types. The experimental results showed that the values of the tested items in all the tested groups were higher than that in the control group. Group PBA exhibited the highest value [(37.52 +/- 2.14) MPa] and this suggested a fact that all of the specimens in group PBA revealed combined failures (failure occurred in metal-porcelain combined surface and within opaque porcelain). Group SPP and RCP showed higher values than SEP (P < 0.05) and most specimens of SPP and RCP performed combined failures (failure occurred in bond surface and within opaque porcelain or composite resin) while all the specimens in group SEP and control group revealed adhesive failures. Conclusions could be drawn that silane coupling agents could reinforce the bond strength of dental composite resin to metal-opaque porcelain substrate. The bond strength between dental composite resin and dental opaque porcelain could meet the clinical requirements.
Acrylic Resins ; chemistry ; Ceramics ; chemistry ; Composite Resins ; chemistry ; Dental Bonding ; Dental Porcelain ; chemistry ; Humans ; Polyurethanes ; chemistry ; Resin Cements ; chemistry ; Silanes ; chemistry

OBJECTIVETo investigate the influence of three primers on the shear bond strength between cast titanium (Ti) and composite resin.

METHODSThe disks (n = 40) were cast by commercially pure (CP) Ti, which diameter were 8 mm and thick were 3 mm. The titanium surfaces were polished with silicon carbide sand papers under running water and then treated by sandblasting and acid (4%HF) etching. They were divided into four groups: control group (group A), treated with KH-570 (group B), treated with Alloy Primer (group C), treated with Metal photo primer (group D). After treatment, the specimens were evaluated for their shear bond strengths by universal testing machine. The values were statistically analyzed. The fractured surfaces were observed by scanning electron microscope (SEM).

RESULTSThe shear bond strengths of group A, B, C, D were (9.773 +/- 0.67), (11.463 +/- 0.82), (14.224 +/- 0.75), (13.157 +/- 0.73) MPa. There were significant differences in bond strength between A and B, C, D (P < 0.01). B and C, D had significant differences (P < 0.01). C and D had no significant differences (P>0.05).

CONCLUSIONKH-570, Alloy Primer, Metal photo primer significantly improve the bond strength of ceramage composite resin to cast titanium. KH-570 group bonding strength is lower than the the Alloy Primer group and Metal photo primer group.

In this study, we evaluate the influence of post surface pre-treatments on the bond strength of four different cements to glass fiber posts. Eighty extracted human maxillary central incisors and canines were endodontically treated and standardized post spaces were prepared. Four post pre-treatments were tested: (i) no pre-treatment (NS, control), (ii) sandblasting (SA), (iii) silanization (SI) and (iv) sandblasting followed by silanization (SS). Per pre-treatment, four dual-cure resin cements were used for luting posts: DMG LUXACORE Smartmix Dual, Multilink Automix, RelyX Unicem and Panavia F2.0. All the specimens were subjected to micro push-out test. Two-way analysis of variance and Tukey post hoc tests were performed (α=0.05) to analyze the data. Bond strength was significantly affected by the type of resin cement, and bond strengths of RelyX Unicem and Panavia F2.0 to the fiber posts were significantly higher than the other cement groups. Sandblasting significantly increased the bond strength of DMG group to the fiber posts.
Aluminum Oxide ; chemistry ; Composite Resins ; chemistry ; Curing Lights, Dental ; classification ; Cuspid ; pathology ; Dental Bonding ; Dental Etching ; methods ; Dental Materials ; chemistry ; Dental Stress Analysis ; instrumentation ; Glass ; chemistry ; Humans ; Incisor ; pathology ; Materials Testing ; Microscopy, Electron, Scanning ; Polymerization ; Post and Core Technique ; instrumentation ; Resin Cements ; chemistry ; Root Canal Preparation ; methods ; Self-Curing of Dental Resins ; methods ; Silanes ; chemistry ; Stress, Mechanical ; Surface Properties ; Tooth, Nonvital ; therapy

BACKGROUND: There is a lack of research on the status of clinical trial pharmacy and clinical trial pharmacist (CTP) in Korea. This study was aimed to investigate the current status of clinical trial pharmacy and clinical trial pharmacists. METHODS: The survey was performed using the 41-item questionnaire designed to investigate information on the following; (1) current status of clinical trial pharmacy designated by Korea Food and Drug Administration, (2) current status of working condition, management, and satisfaction index of CTP. Data collected was analyzed by t-test and chi2. RESULTS: Among the CTPs who responded, 92.7% belonged to department of pharmacy, and 7.3% to clinical trial center. 90.2% of the respondents were women. Forty-two point seven percents of the respondents had more than 3 years of experience in the clinical trial field. 36.6% answered that the current number of CTPs in the institution was '2'. Sixty-three point four percents answered that they subsumed an additional post. Regarding the question on "whether the equipment and working environment of your clinical trials pharmacy is adequate", 65.1% of the respondents answered as 'Inadequate'. Ninety-eight point eight percents answered that work-related education is needed. Ninety-three point nine percents answered that the quality of clinical trials is related to the improvement of the working environment of CTP. CONCLUSION: Clinical trial pharmacy's facility and number of actually working CTP were insufficient. Proper and continuous education and training for CTPs are needed to improve the quality of clinical trials conducted in Korea, with strong institution support and timely regulation change.
Cytidine Triphosphate ; Surveys and Questionnaires ; Female ; Humans ; Korea ; Pharmacists ; Pharmacy ; Silanes ; United States Food and Drug Administration

Authors studied how Claude Bernard, the first founder of experimental medicine, contributed significantly to establishment of modernism and influenced European modern culture. Authors first studied his views on modernity, comparing with Descartes and Magendie, and on the similarity between "Experimental medicine" and the European literature in the 19th century. Bernard was not exclusively against vitalism, but the dogmatic misuse of vitalism. His objective thinking could be a useful model for the authors, who considered science to be an origin of modernity in literature of naturalism. Especially, Emile Zola was strongly influenced by Bernard's "An introduction to the study of Experimental medicine" and published "Experimental novel," a manifesto of naturalism. Although Bernard's experimental methodology and determinism deeply influenced modern European culture, the relationship between his Experimental medicine and modernism have not been fully investigated yet. His experimental medicine also needs to be discussed from the ecological viewpoints. His anthropo-centrism was unique since he emphasized any human theory could not surpass the principle of nature. Conventional anthropo-centrism claims that human beings are superior enough to own and govern the nature. And Bernard's the necessary determinism contains the ecological principle that all life forms and inanimate objects are organically related and intertwined to each other, irrespectively of their usefulness for the human beings. Although there were some ethical debates related to his medical experiments on living bodies of animal, his strict principle to perform experiments only after animal or human body died was worth considering as an effort to sustain ecological viewpoints. He was also unique in terms of being realistic and candid about his situation which was limited by the 19th century's scientific and medical development. In conclusion, the significance of convergence of literature and medical science in Experimental medicine and the importance of Bernard's ecological viewpoints, need to be further studied in the field of medical history.
Animals ; Ecology ; Human Body ; Humans ; Photosensitizing Agents ; Silanes ; Thinking ; Vitalism