BACKGROUND:Developmental dysplasia of hip refers to the deformity of acetabulum and proximal femur,which can lead to hip instability and hip osteoarthritis. Periacetabular osteotomy is the main treatment for non-terminal developmental dysplasia of hip in adolescents and adults. Pelvic inclination plays an important role in biomechanics of hip joint,which determines the stress direction of hip joint. In hip joint diseases,pelvic compensatory tilt can occur to minimize the abnormal stress of hip joint.OBJECTIVE:To observe whether periacetabular osteotomy changes pelvic sagittal tilt in patients with developmental dysplasia of hip,and to investigate the effect of acetabular covering on pelvic sagittal tilt.METHODS:A retrospective analysis was performed on 29 patients who underwent periacetabular osteotomy due to developmental dysplasia of hip in West China Hospital of Sichuan University from August 2019 to June 2022. Anteroposterior X-rays of the standing pelvis were collected before and 6 months after surgery. The pelvic tilt parameters,including the lateral center-edge angle,pubic symphysis to sacroiliac joint distance,pubic symphysis to sacroiliac joint midline distance,sacrofemoral-pubic angle,and pelvic tilt,were measured. Hip functions of all patients were assessed by hip disability and osteoarthritis score and Harris score before and 6 months after surgery.RESULTS AND CONCLUSION:(1) The lateral center-edge angle,pubic symphysis to sacroiliac joint midline distance,and sacrofemoral-pubic angle were significantly increased 6 months postoperatively compared to preoperative values (P<0.05). Tonnis angle and pelvic tilt were significantly decreased (P<0.05). There was no significant difference in pubic symphysis to sacroiliac joint distance between preoperative and postoperative measurements (P>0.05). (2) The hip disability and osteoarthritis scores and Harris scores were significantly increased 6 months after operation (P<0.01). (3) It is indicated that periacetabular osteotomy surgery can significantly improve acetabular coverage and the pelvis showed significant anteversion changes in patients with developmental dysplasia of hip.

BACKGROUND:Developmental dysplasia of hip refers to the deformity of acetabulum and proximal femur,which can lead to hip instability and hip osteoarthritis. Periacetabular osteotomy is the main treatment for non-terminal developmental dysplasia of hip in adolescents and adults. Pelvic inclination plays an important role in biomechanics of hip joint,which determines the stress direction of hip joint. In hip joint diseases,pelvic compensatory tilt can occur to minimize the abnormal stress of hip joint.OBJECTIVE:To observe whether periacetabular osteotomy changes pelvic sagittal tilt in patients with developmental dysplasia of hip,and to investigate the effect of acetabular covering on pelvic sagittal tilt.METHODS:A retrospective analysis was performed on 29 patients who underwent periacetabular osteotomy due to developmental dysplasia of hip in West China Hospital of Sichuan University from August 2019 to June 2022. Anteroposterior X-rays of the standing pelvis were collected before and 6 months after surgery. The pelvic tilt parameters,including the lateral center-edge angle,pubic symphysis to sacroiliac joint distance,pubic symphysis to sacroiliac joint midline distance,sacrofemoral-pubic angle,and pelvic tilt,were measured. Hip functions of all patients were assessed by hip disability and osteoarthritis score and Harris score before and 6 months after surgery.RESULTS AND CONCLUSION:(1) The lateral center-edge angle,pubic symphysis to sacroiliac joint midline distance,and sacrofemoral-pubic angle were significantly increased 6 months postoperatively compared to preoperative values (P<0.05). Tonnis angle and pelvic tilt were significantly decreased (P<0.05). There was no significant difference in pubic symphysis to sacroiliac joint distance between preoperative and postoperative measurements (P>0.05). (2) The hip disability and osteoarthritis scores and Harris scores were significantly increased 6 months after operation (P<0.01). (3) It is indicated that periacetabular osteotomy surgery can significantly improve acetabular coverage and the pelvis showed significant anteversion changes in patients with developmental dysplasia of hip.

Objective:To explore the clinical efficacy of hip arthroscopy (HA) and periacetabular osteotomy (PAO) in the treatment of borderline developmental dysplasia of the hip (BDDH).Methods:The clinical data of 57 patients with BDDH treated with HA or PAO from July 2016 to June 2020 were retrospectively studied. According to surgical methods, they were divided into HA group and PAO group. There were 32 patients (6 males and 26 females) in HA group, with an average age of 34.5±6.4 years, ranging from 19 to 47 years. There were 25 patients (5 males and 20 females) in the PAO group, with an average age of 37.2±6.9 years, ranging from 21 to 50 years. Patients were followed up till May 2023. Imaging data of patients before the surgery and during follow-up were collected including lateral center edge angle (LCEA), anterior center edge angle (ACEA), extrusion index, T?nnis angle, femoral neck anteversion angle, and T?nnis grade. The modified Harris hip score (mHSS), non-arthritic hip score (NAHS) and hip outcome score activity of daily living scale (HOS-ADL) were evaluated at 6 months, 12 months and the final follow-up.Results:All patients were followed up for an average of 54.2±8.2 months in HA group and 55.5±9.4 months in PAO group separately. Before surgery, there were no significant differences in LCEA, ACEA, T?nnis angle, extrusion index, femoral neck anteversion angle and T?nnis grade between the two groups ( P>0.05). α angle of HA was 60.8°±5.8°, which was significant different from α angle of PAO 53.0°±5.9° ( t=5.07, P<0.001). At the final follow-up, in HA group, LCEA, ACEA, T?nnis angle, extrusion index were 20.0°±2.1°, 20.0°±2.6°, 30.6%±2.3%, 10.8°±1.6°, 39.8°±5.4, which were all significantly different from pre-operation data ( P<0.05). While there was no significant difference between pre- and post-operation in T?nnis grade (χ 2=5.72, P=0.057). In PAO group, LCEA, ACEA, T?nnis angle, extrusion index were 33.0°±3.0°, 33.3°±4.0°, 15.0%±4.0%, 2.8°±1.7° which were all significantly different from pre-operation data ( P<0.05). While there were no significant differences between pre- and post-operation in α angle and Tonnis grade ( P>0.05). Between HA group and PAO group, there were significant differences in LCEA, ACEA, T?nnis angle, extrusion index and α angle ( P<0.05), while no significant difference was found in T?nnis grade (χ 2=3.024, P=0.996). There were no significant differences between the two groups in preoperative mHHS, NAHS and HOS-ADL ( P>0.05). At 6 months,12 months and the final follow-up after operation, the mHHS, NAHS and HOS-ADL were significantly improved compared to pre-operation data ( P<0.05). At 6 months and 12 months after operation, the three hip function scores in HA group were significantly better than those in PAO group ( P<0.05). At the final follow-up, there was no significant difference in three hip scores between the HA group and the PAO group ( P>0.05). Conclusion:Both HA and PAO can achieve good short- and mid-term clinical efficacy in the treatment of BDDH. Specifically, HA is superior to PAO in the early clinical efficacy, and the mid-term clinical efficacy is similar. PAO is able to improve the acetabular radiographic parameters of BDDH (except α angle) while HA can only improve α angle. However, they all can effectively delay the imaging progression of hip osteoarthritis.

OBJE CTIVE To prepare and characterize evodiamine phospholipid complex self-microemulsifying drug delivery system（EVO-PC-SMEDDS），and to investigate its gastric mucosal permeability. METHODS EVO-PC-SMEDDS was prepared ， and particle size ，polydispersity（PDI）and Zeta potential were tested ，and microscopic observation was carried out. The stability of EVO-PC-SMEDDS in simulated gastric liquid with different pH （1.2，2.0，4.0，7.0）was investigated. The entrapment efficiency and drug-loading amount of the preparation were determined ，and the in vitro release was investigated. The gastric mucosal permeability of EVO-PC-SMEDDS was studied by combining rat gastric mucosal tissue and Ussing Chamber technology. RESULTS The particle size of EVO-PC-SMEDDS was （53.63±1.51）nm，PDI and Zeta potential were 0.217±0.017 and （－12.20±0.15）mV，entrapment efficiency was （95.25±0.97）％ and drug-loading amount was （19.30±1.21）mg/g. EVO-PC- SMEDDS exhibited a uniformly dispersed round spherical shape under transmission electron microscope. Stability experiments showed that EVO-PC-SMEDDS exhibited no significant change in particle size ，PDI and Zeta potential under the simulated gastric fluid with different pH and showed excellent stability. Results of in vitro release test showed that compared with evodiamine （EVO），in vitro accumulative release of EVO-PC-SMEDDS were enhanced 6.83-fold，which was in line with the first-order kinetic release model. Results of gastric mucosal permeability showed that gastric mucosal permeation transport ，permeation rate ， permeation flux and area under curve of cumulative permeability of EVO-PC-SMEDDS were higher than those of EVO ， respectively. CONCLUSIONS EVO-PC-SMEDDS is prepared N successfully and shows good stability. It could significantly improve the release behavior and gastric mucosal permeability of EVO.

OBJECTIVE：To optimize the form ulation of Zuojin pectin c apsules，and to prepare modern Zuojin pectin capsules with protective effects against gastric ulcers. METHODS ：The formulation of Zuojin pectin capsules was optimized with orthogonal test with the contents of pectin ，soluble starch and dextrin as factors ，using formability ，moisture absorption and flow ability as indicators. Zuojin pectin capsule was prepared by wet granulation filling method with Zuojin extract powder as raw material. The contents of palmatine hydrochloride ，berberine hydrochloride ，evodiamine and rutaecarpin were evaluated by HPLC. Basket method was used to investigate the release behavior of the capsule in 0.1 mol/L HCl solution. The gastric ulcer model of rats was established by intragastric administration of 75％ ethanol. Gastric ulcer index ，the inhibition rate of gastric ulcer and the pathological sections were used as indexes to investigate the protective effect of Zuojin pectin capsules （the doses were 54，108， 216 mg/kg）on gastric ulcer. RESULTS ：The optimal formulation of Zuojin pectin capsules included 45％ pectin，12％ soluble starch，27％ dextrin and 1％ xylitol. Results of in vitro drug ， release showed that palmatine hydrochloride and berberine， hydrochloride in Zuojin pectin capsules released 53.76％ and No.54.82％ respectively within 1 h，completely released at about 8 h， and conformed to the zero-order release behavior. 2492109374@qq.com Different doses of Zuojin pectin capsule could improve the ulcer injury of gastric tissue in gastric ulcer model rats to different extent ，and significantly reduced the gastric ulcer index（P＜0.01），significantly increased the inhibition rate of gastric ulcer and the percentage of positive expression area of Schiff ’s iodate staining （P＜0.01）. CONCLUSIONS ：Zuojin pectin capsule with protective effect on gastric ulcer and certain sustained- release effect is successfully prepared.

Objective: To isolate a bacteriophage against pan-drug resistant Klebsiella pneumoniae in a burn patient, and to study its biological characteristics, genomic information, and effects on bacterial biofilm. Methods: (1) In 2018, pan-drug resistant Klebsiella pneumoniae UA168 (hereinafter referred to as the host bacteria) solution isolated from the blood of a burn patient in Ruijin Hospital Affiliated to Shanghai Jiao Tong University School of Medicine (hereinafter referred to as Ruijin Hospital) was used to isolate and purify the bacteriophage against pan-drug resistant Klebsiella pneumoniae from the sewage of Ruijin Hospital with sewage co-culture method, drip plate method, and double-agar plate method. The bacteriophage was named as phage KP168 and the plaque morphology was observed. (2) The phage KP168 solution was taken for cesium chloride density gradient centrifugation and dialysis, and then the morphology of phage KP168 was observed through transmission electron microscope after phosphotungstic acid negative staining. (3) The phage KP168 solution was taken to determine the lytic ability of the phage KP168 against 20 strains of pan-drug resistant Klebsiella pneumoniae isolated from the burned patients′ blood in Ruijin Hospital by the drip plate method, and then the lysis rate was calculated. (4) The phage KP168 solution at a initial titer of 9.3×10¹¹ plaque-forming unit (PFU)/mL (400 μL per tube) and the host bacteria solution at a concentration of 1×10⁹ colony-forming unit (CFU)/mL (4 mL per tube) were conventionally shaking cultured together for 4 hours at multiplicity of infection (MOI) of 10.000, 1.000, 0.100, 0.010, or 0.001, respectively (1 tube per MOI). The titer of phage KP168 was measured by the double-agar plate method (the measurement method was the same below) to select the optimal MOI. The experiment was repeated three times. (5) The host bacteria solution at a concentration of 1×10⁹ CFU/mL (4 mL per tube) and the phage KP168 solution at an adjusted titer of 5×10⁷ PFU/mL (400 μL per tube) were mixed at the MOI of 0.005. The plaques were counted 0 (immediately), 1, 2, 3, 4, 5, 15, and 30 minutes (1 tube at each time point) after mixing by the double-agar plate method (the counting method was the same below), and the percentage of adsorbed phages was calculated to screen for the optimal adsorption time. The experiment was repeated three times. (6) The host bacteria solution at a concentration of 1×10⁹ CFU/mL (300 μL per tube) and the phage KP168 solution at a titer of 5×10⁸ PFU/mL (60 μL per tube) were mixed at MOI of 0.005 and conventionally shaking cultured after standing for the optimal adsorption time. The phage KP168 titer was measured 0 (immediately), 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100 minutes after culture, and a one-step growth curve was drawn. The experiment was repeated three times. (7) The phage KP168 solution at a titer of 2.5×10¹⁰ PFU/mL was left to stand for 1 hour at 37, 40, 50, 60, or 70 ℃ (3 tubes at each time point, 1 mL per tube) for counting the plaques, and then the thermal stability curve was drawn. SM buffer at a pH values of 5.0, 6.0, 7.0, 7.4, 8.0, 9.0, or 10.0 were added to the phage KP168 solution at a titer of 3.0×10¹⁰ PFU/mL, respectively. The mixed solution was left to stand for 1 hour at 37 ℃ (3 tubes of each pH, each tube containing 100 μL phage KP168 solution and 900 μL SM buffer), and then the plaques were counted, and an acid-base stability curve was drawn. (8) The phage KP168 solution was taken for DNA extraction and sequencing after dialysis as in experiment (2). The whole genome was annotated with Prokka to obtain the coding sequence of phage KP168. Nucleotide′s BLAST function was used to proceed nucleic acid sequence alignment for finding a known phage with the highest similarity to the phage KP168 nucleic acid sequence, and Blastx function was used to translate the coding sequence into protein for its function prediction. The comparison with Antibiotic Resistance Genes Database and Virulence Factors Database was proceeded. (9) In a 96-well plate, at a MOI of 1.000, 0.100, 0.010 or 0.001 (3 wells per MOI), 20 μL phage KP168 solution at a initial titer of 5.8×10¹⁰ PFU/mL was added to 200 μL host bacteria solution at a concentration of 1.5×10⁸ CFU/mL (the same concentration below) for co-cultivation for 48 hours. After 200 μL host bacteria solution was left to stand for 48 hours, 20 μL phage KP168 solution at a titer of 1×10^6, 1×10^7, 1×10^8, 1×10^9, or 1×10¹⁰ PFU/mL (3 wells per titer) was added respectively for action for 4 hours. In both experiments, 200 μL host bacteria solution added with 20 μL SM buffer (3 wells) acted as a negative control, and 220 μL LB culture medium (3 wells) acted as a blank control. Absorbance values were measured by a microplate reader, and inhibition/destruction rates of biofilm were calculated. The experiments were both repeated three times. Results: (1) The plaques of phage KP168 successfully isolated and purified were transparent and round, and its diameter was approximately 1.5 mm. (2) The phage KP168 has a regular polyhedron structure with a diameter of about 50 nm and without a tail. (3) The phage KP168 could lyse 13 of 20 strains of Klebsiella pneumoniae from burned patients, with a lysis rate of 65.0%. (4) When MOI was 1.000, the titer was the highest after co-culturing the phage KP168 with the host bacteria for 4 hours, which was the optimal MOI. (5) After the mixing of the phage KP168 with the host bacteria for 4 minutes, the percentage of the adsorbed phage reached the highest, which was the optimal adsorption time. (6) The one-step growth curve showed that during the lysis of the host bacteria by phage KP168, the incubation period was about 10 minutes, and the lysis period was about 40 minutes. (7) With the condition of 40 ℃ or pH 7.4, the number of plaques and the activity of phage KP168 reached the highest. (8) The genome of phage KP168 was a linear double-stranded DNA with a length of 40 114 bp. There were 48 possible coding sequences. It had the highest similarity to Klebsiella phage_vB_Kp1. The most similar known proteins corresponding to the translated proteins of coding sequences contained 23 hypothetical proteins and 25 proteins with known functions. No resistance genes or virulence factor genes were found. The GeneBank accession number was KT367885. (9) After 48 hours of co-cultivation of the phage KP168 and the host bacteria at each MOI, the inhibition rates of biofilm were similar, with an average of about 45%. After the phage KP168 with a titer of 1×10⁹ PFU/mL acted on the biofilm formed by the host bacteria for 4 h, the destruction rate of biofilm was the highest, reaching an average of 42%. Conclusions In this study, a bacteriophage against pan-drug resistant Klebsiella pneumoniae from a burn patient, phage KP168, is isolated from sewage, which belongs to the tailless phage. It has a wide host spectrum, short adsorption time, and short incubation period, with certain thermal and acid-base stability. Its genomic information is clear, and it does not contain resistance genes or virulence factor genes. It also has an inhibitory effect on the formation of bacterial biofilm and a destructive effect on the formed bacterial biofilm.