Metabolic-associated fatty liver disease (MAFLD) and osteoporosis (OP) are two very common metabolic diseases. A growing body of experimental evidence supports a pathophysiological link between MAFLD and OP. MAFLD is often associated with the development of OP. Rutaecarpine (RUT) is one of the main active components of Chinese medicine Euodiae Fructus. Our previous studies have demonstrated that RUT has lipid-lowering, anti-inflammatory and anti-atherosclerotic effects, and can improve the OP of rats. However, whether RUT can improve both fatty liver and OP symptoms of MAFLD mice at the same time remains to be investigated. In this study, we used C57BL/6 mice fed a high-fat diet (HFD) for 4 months to construct a MAFLD model, and gave the mice a low dose (5 mg·kg^-1) and a high dose (15 mg·kg^-1) of RUT by gavage for 4 weeks. The effects of RUT on liver steatosis and bone metabolism were then evaluated at the end of the experiment [this experiment was approved by the Experimental Animal Ethics Committee of Institute of Medicinal Biotechnology, Chinese Academy of Medical Sciences (approval number: IMB-20190124D₃03)]. The results showed that RUT treatment significantly reduced hepatic steatosis and lipid accumulation, and significantly reduced bone loss and promoted bone formation. In summary, this study shows that RUT has an effect of improving fatty liver and OP in MAFLD mice.

The rationale for the design of control groups in tuina clinical trial is the foundation for rigorously validating the effectiveness and safety of this therapy. This article reviewed the current state of the design of tuina placebo in control groups of clinical trials， pointed out the necessity of setting up tuina placebo in clinical trials of tuina， analyzed the challenges in implementing blinding of tuina manipulation， and concluded that tuina placebo is still challenged by the placebo effect， the diversification of tuina manipulation but the lack of standardization， and the difficulty of implementing blinding due to the high level of public awareness of tuina. This article also summarized the design of placebo manipulation in three types of clinical trials， including spinal manipulation， acupressure， and paediatric tuina， and proposed four strategies for designing placebo tuina manipulation-controlling placebo effects， developing operational standards for placebo tuina manipulation， ensuring the rigor of blinding implementation， and applying new technologies to enhance the standardization and blinding capacity of placebo tuina methods. So the article is aimed at improving the methodological quality of tuina clinical trial designs， and promoting the standardization and scientificity of tuina clinical trial design.

Qualitative and quantitative analysis methods for chemical components of different processed products of Corni Fructus were established to systematically characterize and identify these components, and the content of the main differential components was determined. The chemical components of different processed products of Corni Fructus were collected using ultra-high performance liquid chromatography-quadrupole time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS). Through analysis of self-built databases, literature, and reference standards, a total of 93 components were obtained, including 19 iridoids, 15 flavonoids, 16 organic acids, eight triterpenoids, eight tannins, four amino acids, two polysaccharides, five olefins, and 16 other compounds. Additionally, by using multivariate statistical methods, the differential components between different processed products of Corni Fructus were screened under the conditions of VIP>1.0 and FC<0.5 or FC>2.0 and P<0.05. The PCA and OPLS-DA results showed differences in the chemical components between different processed products of Corni Fructus. A total of 21 differential components were screened, including tartaric acid, morroniside, and rutin. On this basis, ultra-high performance liquid chromatography-triple quadrupole tandem mass spectrometry(UPLC-QqQ-MS/MS) was used to determine the content of 10 main common differential components, including gallic acid, morroniside, ursolic acid, loganin, swertiamarin, rutin, 5-hydroxymethylfurfural, cornuside Ⅰ, quercetin, and oleanolic acid. The above 10 components showed a good linear relationship within the determined concentration range, with the precision, stability, repeatability, and sample recovery rate all meeting the requirements. Compared with that in Corni Fructus, the content of iridoid glycosides in wine-prepared Corni Fructus and wine-and honey-prepared Corni Fructus decreased, while the content of gallic acid, rutin, quercetin, 5-hydroxymethylfurfural, ursolic acid, and oleanolic acid increased. Compared with wine-prepared Corni Fructus, wine-and honey-prepared Corni Fructus showed varying degrees of increase in all other components, except for a slight decrease in gallic acid content. In summary, this study clarified the influence of different processing methods on the chemical components of Corni Fructus, providing a theoretical basis for the scientific connotation, overall quality evaluation, and clinically rational application of Corni Fructus processing in the future.
Tandem Mass Spectrometry/methods* ; Chromatography, High Pressure Liquid/methods* ; Cornus/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Fruit/chemistry*

Diabetic foot (DF) is one of the most serious chronic complications of diabetes. The incidence rate among global diabetes patients is as high as 15% to 25%, and about 50% of patients will develop contralateral foot ulcers within 5 years after the first unilateral ulcer. As a non-invasive prevention and control solution, the application progress of functional insoles is mainly reflected in the following aspects:(1) Material innovation. The application of new composite materials and smart materials has significantly enhanced the pressure reduction effect and comfort. (2) Structural optimization. The development of multi-layer design and local pressure reduction structure has achieved more precise pressure distribution regulation. (3) Manufacturing process. 3D printing and parametric design have enabled the personalized customization of functional insoles. (4) Intelligent monitoring. It integrates functions such as pressure sensing and temperature monitoring, achieving real-time monitoring and early warning of foot conditions. Clinical research has confirmed that personalized functional insoles could reduce the incidence of foot ulcers and shorten the healing time of ulcers. At present, the research hotspots mainly focus on the development of smart materials, the construction of multi-functional integration and remote monitoring systems. However, in-depth research is still needed in the aspects of biomechanical mechanisms, standardized evaluation systems and long-term efficacy assessment. The development of future functional insoles should focus on the coordinated advancement of "personalization-intelligence-standardization", with the aim of providing more effective solutions for the prevention and treatment of DF.
Humans ; Diabetic Foot/therapy* ; Foot Orthoses

To investigate the impact of preoperative serum follicle-stimulating hormone (FSH) levels on the probability of testicular sperm retrieval, we conducted a study of nonobstructive azoospermic (NOA) men with different testicular volumes (TVs) who underwent microdissection testicular sperm extraction (micro-TESE). A total of 177 NOA patients undergoing micro-TESE for the first time from April 2019 to November 2022 in Shenzhen Zhongshan Obstetrics and Gynecology Hospital (formerly Shenzhen Zhongshan Urology Hospital, Shenzhen, China) were retrospectively reviewed. The subjects were divided into four groups based on average TV quartiles. Serum hormone levels in each TV group were compared between positive and negative sperm retrieval subgroups. Overall sperm retrieval rate was 57.6%. FSH levels (median [interquartile range]) were higher in the positive sperm retrieval subgroup compared with the negative outcome subgroup when average TV was <5 ml (first quartile [Q1: TV <3 ml]: 43.32 [17.92] IU l -1 vs 32.95 [18.56] IU l -1 , P = 0.048; second quartile [Q2: 3 ml ≤ TV <5 ml]: 31.31 [15.37] IU l -1 vs 25.59 [18.40] IU l -1 , P = 0.042). Elevated serum FSH levels were associated with successful micro-TESE sperm retrieval in NOA men whose average TVs were <5 ml (adjusted odds ratio [OR]: 1.06 per unit increase; 95% confidence interval [CI]: 1.01-1.11; P = 0.011). In men with TVs ≥5 ml, larger TVs were associated with lower odds of sperm retrieval (adjusted OR: 0.84 per 1 ml increase; 95% CI: 0.71-0.98; P = 0.029). In conclusion, elevated serum FSH levels were associated with positive sperm retrieval in micro-TESE in NOA men with TVs <5 ml. In men with TV ≥5 ml, increases in average TVs were associated with lower odds of sperm retrieval.
Humans ; Male ; Azoospermia/surgery* ; Sperm Retrieval/statistics & numerical data* ; Adult ; Follicle Stimulating Hormone/blood* ; Retrospective Studies ; Testis/pathology* ; Microdissection ; Organ Size

Thoracic aortic aneurysm (TAA) significantly endangers the lives of individuals with Marfan syndrome (MFS), yet the intricacies of their biomechanical origins remain elusive. Our investigation delves into the pivotal role of hemodynamic disturbance in the pathogenesis of TAA, with a particular emphasis on the mechanistic contributions of the mammalian target of rapamycin (mTOR) signaling cascade. We uncovered that activation of the mTOR complex 1 (mTORC1) within smooth muscle cells, instigated by the oscillatory wall shear stress (OSS) that stems from disturbed flow (DF), is a catalyst for TAA progression. This revelation was corroborated through both an MFS mouse model (Fbn1 ^+/C1039G) and clinical MFS specimens. Crucially, our research demonstrates a direct linkage between the activation of the mTORC1 pathway and the intensity in OSS. Therapeutic administration of rapamycin suppresses mTORC1 activity, leading to the attenuation of aberrant SMC behavior, reduced inflammatory infiltration, and restoration of extracellular matrix integrity-collectively decelerating TAA advancement in our mouse model. These insights posit the mTORC1 axis as a strategic target for intervention, offering a novel approach to manage TAAs in MFS and potentially pave insights for current treatment paradigms.

Objective To analyze the cellular and histopathological characteristics of underdiagnosed thyroid nodules of Chinese thyroid imaging reporting and data system(C-TIRADS) categories 3 and 4a,thus improving the understanding of these lesions. Methods The data of ultrasound and fine needle aspiration cytology were collected from 683 nodules diagnosed based on pathological evidence in 549 patients undergoing thyroid surgery.The cellular and histopathological characteristics of C-TIRADS 3 and 4a nodules were analyzed. Results Two hundred and sixty-eight nodules were classified as C-TIRADS category 3,including 236 benign nodules,12 low-risk ones,and 20 (7.46%) malignant ones.Two hundred and twenty-one nodules were classified as C-TIRADS category 4a,including 133 benign nodules,7 low-risk ones,and 81 (36.65%) malignant ones.The malignancy rates differed between C-TIRADS 3 and 4a nodules (χ²=58.93,P<0.001),and both were higher than the recommended malignancy rate in the guidelines for malignancy risk stratification of thyroid nodules (C-TIRADS) (both P<0.001).According to the pathological evidence,the underdiagnosed C-TIRADS 3/4a nodules were mainly papillary thyroid carcinoma,especially in patients with Hashimoto thyroiditis.There was not a consistent one-to-one match between each ultrasound result and each cytological classification of low-risk thyroid nodules.Conclusions When the malignant features in preoprative ultrasound imaging are atypical or absent,papillary thyroid carcinoma (especially with Hashimoto thyroiditis),follicular carcinoma,and medullary carcinoma are likely to be underdiagnosed as C-TIRADS 3 or 4a nodules.Therefore,efforts should be made to fully understand the cellular and pathological characteristics of these lesions.
Humans ; Thyroid Nodule/diagnostic imaging* ; Female ; Male ; Middle Aged ; Adult ; Ultrasonography ; Biopsy, Fine-Needle ; Aged ; Young Adult ; Thyroid Neoplasms/diagnostic imaging* ; Adolescent

Objective To construct a three-dimensional statistical shape model of the pelvis and analyze the individual variation and gender differences of the three-dimensional shape of the pelvis.Methods We collected CT data from 201 Chinese individuals and used deep learning to automatically reconstruct three-dimensional models of the pelvis.Through three-dimensional model registration,dense correspondence mesh mapping,and the use of statistical shape modelling(SSM)and principal component(PC)analysis method,we extracted models of variations(MoV)of pelvic shape changes and statistically compared the shape MoV between males and females.Results We analysed the top 10 principal components of shape variations,which accounted for 86.1％of the total variability.Among them,PC01,PC02,and PC04 showed significant differences between genders(P＜0.001),accounting for a total variability of 60.1％.PC08 and PC 10 demonstrated pelvic asymmetry,accounting for a total variability of 3.8％.Conclusion We constructed a three-dimensional statistical shape model of the pelvis in Chinese individuals,revealing the morphological variation and sex differences of Chinese pelvis.

Objective To design and evaluate a dilation incision device capable of facilitating stable support and flexible adjustment during neurosurgical procedures.Methods The dilation incision device was composed of a support plate,an adjustment assembly,a brain support ring,a rotation assembly,an electric motor,an expansion assembly and a neck support ring.The support plate was made of high-strength stainless steel;the adjustment assembly was made up of a first screw,a lifting groove,a slide bar and a nut;the brain support ring was fixed to the adjustment assembly through a support rod,with an outer layer of medical-grade silicone and an inner layer of stainless steel skeleton;the rotation assembly connected the brain support ring with the expansion assembly and consisted of a rotating shaft,a connecting rod and a rotating lug;a high-precision direct current servo motor was selected for the device;the expansion assembly included a spring,an expansion plate and a moving plate,which realized auto expansion or contraction through spring pressure;the neck support ring had its outer layer made of flexible polyurethane foam and inner layer being a stainless steel skeleton.The device had its stability and safety evaluated by static and dynamic tests at different heights(50,100,150 mm)and angles(0°,30°,60°),which was compared with the traditional fixation device to verify its application effect.Results Static and dynamic tests indicated the device showed high stability and safety in different heights and angles,and gained advantages over the traditional device in stability,convenient operation and surgical field visualization.Conclusion The device developed meets the requirements of neurosurgical procedures,and enhances the safety and portability of neurosurgical procedures.[Chinese Medical Equipment Journal,2024,45(10):37-40]