Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Objective To detect the isocenter of a medical linear accelerator using an optical surface monitoring system (OSMS) combined with a self-made 3D-printed phantom, and compare with the conventional front pointer measurement method. Methods A phantom that could be fixed to the front pointer of the accelerator was fabricated using 3D printing technology. The front pointer method and OSMS were used to detect the rotation isocenter deviations of the accelerator. During the experiments, the collimator, gantry, and couch linear displacement readings were recorded at different angles. We also recorded the measurement time of different surveyors. Results Compared to the front pointer measurement method, the OSMS method showed lower standard deviations. The reductions in standard deviations showed statistical significance in the Lat direction for the collimator rotation isocenter as well as in the Lat and Vrt directions for the gantry rotation isocenter. The mean deviation of Mag values for the collimator rotation isocenter using the OSMS method was 0.50 mm, which was larger than the 0.42 mm using the front pointer method. However, the standard deviation was 0.06 using the OSMS method, which was smaller than the 0.18 using the front pointer method. The mean deviation and standard deviation of Sag values for the gantry rotation isocenter using the OSMS method were 1.03 mm and 0.12, respectively, which were both larger than 0.47 mm and 0.06 using the front pointer method. For the couch rotation isocenter, the mean deviation and standard deviation using the OSMS method were 0.32 mm and 0.04, respectively, which were both smaller than the 0.55 mm and 0.20 using the front pointer method. All surveyors spent less time in isocenter measurements using the OSMS method compared to the front pointer method. Conclusion Compared with the front pointer method, the OSMS method significantly reduces the standard deviation among surveyors, effectively reduces the influence of the angle deviation of the accelerator on the measurement results, reduces detection time, improves detection efficiency, and provides a powerful practical basis for the application of OSMS in detecting the mechanical accuracy of the linear accelerator.

Ureaplasma urealyticum (UU) is one of the most commonly occurring pathogens associated with genital tract infections in infertile males, but the impact of seminal UU infection in semen on intrauterine insemination (IUI) outcomes is poorly understood. We collected data from 245 infertile couples who underwent IUI at The First Affiliated Hospital of USTC (Hefei, China) between January 2021 and January 2023. The subjects were classified into two groups according to their UU infection status: the UU-positive group and the UU-negative group. We compared semen parameters, pregnancy outcomes, and neonatal birth outcomes to investigate the impact of UU infection on IUI outcomes. There were no significantly statistical differences in various semen parameters, including semen volume, sperm concentration, total and progressive motility, sperm morphology, leukocyte count, the presence of anti-sperm antibody, and sperm DNA fragmentation index (DFI), between the UU-positive and UU-negative groups of male infertile patients (all P > 0.05). However, the high DNA stainability (HDS) status of sperm differed between the UU-positive and UU-negative groups, suggesting that seminal UU infection may affect sperm nuclear maturation ( P = 0.04). Additionally, there were no significant differences in pregnancy or neonatal birth outcomes between the two groups (all P > 0.05). These results suggest that IUI remains a viable and cost-effective option for infertile couples with UU infection who are facing infertility issues.
Humans ; Male ; Ureaplasma Infections/complications* ; Female ; Infertility, Male/therapy* ; Ureaplasma urealyticum/isolation & purification* ; Pregnancy ; Adult ; Pregnancy Outcome ; Semen Analysis ; Insemination, Artificial ; Semen/microbiology* ; China

To investigate the impact of preoperative serum follicle-stimulating hormone (FSH) levels on the probability of testicular sperm retrieval, we conducted a study of nonobstructive azoospermic (NOA) men with different testicular volumes (TVs) who underwent microdissection testicular sperm extraction (micro-TESE). A total of 177 NOA patients undergoing micro-TESE for the first time from April 2019 to November 2022 in Shenzhen Zhongshan Obstetrics and Gynecology Hospital (formerly Shenzhen Zhongshan Urology Hospital, Shenzhen, China) were retrospectively reviewed. The subjects were divided into four groups based on average TV quartiles. Serum hormone levels in each TV group were compared between positive and negative sperm retrieval subgroups. Overall sperm retrieval rate was 57.6%. FSH levels (median [interquartile range]) were higher in the positive sperm retrieval subgroup compared with the negative outcome subgroup when average TV was <5 ml (first quartile [Q1: TV <3 ml]: 43.32 [17.92] IU l -1 vs 32.95 [18.56] IU l -1 , P = 0.048; second quartile [Q2: 3 ml ≤ TV <5 ml]: 31.31 [15.37] IU l -1 vs 25.59 [18.40] IU l -1 , P = 0.042). Elevated serum FSH levels were associated with successful micro-TESE sperm retrieval in NOA men whose average TVs were <5 ml (adjusted odds ratio [OR]: 1.06 per unit increase; 95% confidence interval [CI]: 1.01-1.11; P = 0.011). In men with TVs ≥5 ml, larger TVs were associated with lower odds of sperm retrieval (adjusted OR: 0.84 per 1 ml increase; 95% CI: 0.71-0.98; P = 0.029). In conclusion, elevated serum FSH levels were associated with positive sperm retrieval in micro-TESE in NOA men with TVs <5 ml. In men with TV ≥5 ml, increases in average TVs were associated with lower odds of sperm retrieval.
Humans ; Male ; Azoospermia/surgery* ; Sperm Retrieval/statistics & numerical data* ; Adult ; Follicle Stimulating Hormone/blood* ; Retrospective Studies ; Testis/pathology* ; Microdissection ; Organ Size

Investigating the correlation between micronucleus formation and male infertility has the potential to improve clinical diagnosis and deepen our understanding of pathological progression. Our study enrolled 2252 male patients whose semen was analyzed from March 2023 to July 2023. Their clinical data, including semen parameters and age, were also collected. Genetic analysis was used to determine whether the sex chromosome involved in male infertility was abnormal (including the increase, deletion, and translocation of the X and Y chromosomes), and subsequent semen analysis was conducted for clinical grouping purposes. The participants were categorized into five groups: normozoospermia, asthenozoospermia, oligozoospermia, oligoasthenozoospermia, and azoospermia. Patients were randomly selected for further study; 41 patients with normozoospermia were included in the control group and 117 patients with non-normozoospermia were included in the study group according to the proportions of all enrolled patients. Cytokinesis-block micronucleus (CBMN) screening was conducted through peripheral blood. Statistical analysis was used to determine the differences in micronuclei (MNi) among the groups and the relationships between MNi and clinical data. There was a significant increase in MNi in infertile men, including those with azoospermia, compared with normozoospermic patients, but there was no significant difference between the genetic and nongenetic groups in azoospermic men. The presence of MNi was associated with sperm concentration, progressive sperm motility, immotile spermatozoa, malformed spermatozoa, total sperm count, and total sperm motility. This study underscores the potential utility of MNi as a diagnostic tool and highlights the need for further research to elucidate the underlying mechanisms of male infertility.
Humans ; Male ; Infertility, Male/genetics* ; Adult ; Micronucleus Tests ; Semen Analysis ; Oligospermia/genetics* ; Azoospermia/genetics* ; Chromosome Aberrations ; Sperm Count ; Micronuclei, Chromosome-Defective ; Middle Aged

OBJECTIVE: To explore the safety and efficacy of high-dose etoposide (VP-16) combined with recombinant human granulocyte colony-stimulating factor (rhG-CSF) as salvage mobilization for peripheral blood stem cells (PBSC) in newly diagnosed multiple myeloma (NDMM) patients. METHODS: From April 2021 to May 2023, eight NDMM patients who had failed to yield sufficient PBSC during initial mobilization with high-dose cyclophosphamide (CTX) combined with rhG-CSF underwent salvage mobilization with 1.2 g/m2 etoposide combined with rhG-CSF 10 μg/(kg·d). The effects and adverse reactions of initial mobilization and salvage mobilization were analyzed. RESULTS: For salvage mobilization and initial mobilization, the numbers of PBSC collections were 16 and 18, respectively. The mean value of total collected CD34⁺ cells were (11.90±5.75)×10⁶/kg and (1.67±0.75)×10⁶/kg (P =0.0010) in salvage mobilization group and initial mobilization group, respectively. The proportion of patients with a total collection of CD34⁺ cell count≥2×10⁶/kg were 100% and 37.5% (P =0.0625), and the proportion of patients with a total collection of CD34⁺ cell count≥5×10⁶/kg were 87.5% and 0% (P =0.0156) in salvage mobilization group and initial mobilization group, respectively. For five patients who underwent high-dose CTX initial mobilization but had a total CD34⁺ cell count < 2×10⁶/kg, successful collection was achieved through salvage mobilization with high-dose VP-16. Salvage mobilization with high-dose VP-16 was scheduled 2-3 weeks after failure of CTX mobilization. Adverse reactions of high-dose VP-16 mobilization did not increase compared to the initial mobilization with high-dose CTX. CONCLUSION As a salvage mobilization regimen, VP-16 1.2 g/m² combined with rhG-CSF is safe and highly effective in NDMM patients who failed to initial mobilization with high-dose CTX combined with rhG-CSF.
Humans ; Multiple Myeloma/therapy* ; Etoposide/therapeutic use* ; Hematopoietic Stem Cell Mobilization/methods* ; Cyclophosphamide/therapeutic use* ; Granulocyte Colony-Stimulating Factor ; Salvage Therapy ; Peripheral Blood Stem Cells ; Male ; Middle Aged ; Female ; Peripheral Blood Stem Cell Transplantation

OBJECTIVE: To elucidate the mechanism of Banxia Houpo Decoction (BHD) in treating gastroesophageal reflux disease (GERD) by integrating and utilizing the compound analysis, network pharmacology, and empirical verification. METHODS: Ultra-high performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS) was utilized to identify the primary compounds in BHD. Network pharmacology was employed to retrieve target genes. A GERD rat model was developed and 32 SD rats were randomly divided into model, BHD-L (3 g/kg), BHD-H (6 g/kg), and mosapride (0.75 mg/kg) groups using a random number table, 8 rats in each group. Eight rats without the construction of a GERD model were selected as the blank group. Esophageal damage was evaluated through visualization and histopathology evaluation. 5-hydroxytryptamine (5-HT) levels in serum and lower esophageal sphincter (LES) were determined by ELISA. LES contractility was measured with a force transducer, and serotonin transporter (SERT) and 5-HT4R expressions in LES were assessed by RT-PCR, Western blot, and immunofluorescence staining, respectively. RESULTS: UPLC-HRMS analysis identified 37 absorption peaks and 157 compounds in BHD. Functional enrichment identified SERT as a significant target for LES contractility. Histopathological findings indicated less severe esophageal mucosal damage in the BHD-H group compared with the model group. Although serum 5-HT levels showed no significant difference, 5-HT concentration in LES tissue was notably higher in the BHD-H group (P<0.05). Within the range from 10^-10 to 10^-7 mmol/L, LES contractility in the BHD-H and mosapride groups was significantly increased (P<0.05). Within the range from 3 × 10^-7 to 3 × 10^-6 mmol/L 5-HT, LES contractility in the BHD-H group was increased (P<0.05). No significant difference was detected within the range from 10^-5 to 10^-4 mmol/L 5-HT. Notably, SERT expression in the BHD-H group assessed by RT-PCR, Western blot, and immunofluorescence staining were significantly lower than that in the model group (all P<0.01); while 5-HT4R expression remained unchanged. CONCLUSION BHD may increase LES contractility by inhibiting SERT expression in LES tissue.
Animals ; Gastroesophageal Reflux/physiopathology* ; Drugs, Chinese Herbal/chemistry* ; Rats, Sprague-Dawley ; Network Pharmacology ; Male ; Serotonin/metabolism* ; Rats ; Disease Models, Animal ; Serotonin Plasma Membrane Transport Proteins/metabolism* ; Esophagus/drug effects*

Extensive epigenetic reprogramming involves in memory CD8+ T-cell differentiation. The elaborate epigenetic rewiring underlying the heterogeneous functional states of CD8+ T cells remains hidden. Here, we profile single-cell chromatin accessibility and map enhancer-promoter interactomes to characterize the differentiation trajectory of memory CD8+ T cells. We reveal that under distinct epigenetic regulations, the early activated CD8+ T cells divergently originated for short-lived effector and memory precursor effector cells. We also uncover a defined epigenetic rewiring leading to the conversion from effector memory to central memory cells during memory formation. Additionally, we illustrate chromatin regulatory mechanisms underlying long-lasting versus transient transcription regulation during memory differentiation. Finally, we confirm the essential roles of Sox4 and Nrf2 in developing memory precursor effector and effector memory cells, respectively, and validate cell state-specific enhancers in regulating Il7r using CRISPR-Cas9. Our data pave the way for understanding the mechanism underlying epigenetic memory formation in CD8+ T-cell differentiation.
CD8-Positive T-Lymphocytes/metabolism* ; Cell Differentiation ; Chromatin/immunology* ; Animals ; Mice ; Immunologic Memory ; Epigenesis, Genetic ; SOXC Transcription Factors/immunology* ; NF-E2-Related Factor 2/immunology* ; Mice, Inbred C57BL ; Gene Regulatory Networks ; Enhancer Elements, Genetic

BACKGROUND: A growing body of research is exploring the role of antioxidant and anti-inflammatory dietary supplements in the treatment of osteoarthritis, highlighting an increasing emphasis on non-pharmacological interventions. Although more patients are turning to supplements to manage osteoarthritis, their actual effectiveness remains uncertain. OBJECTIVE: This study aims to provide a comprehensive evaluation of the available evidence concerning the efficacy of various dietary supplements in osteoarthritis treatment. SEARCH STRATEGY: We searched PubMed, Embase, Cochrane Library and Web of Science for studies on the use of various dietary supplements in the treatment of osteoarthritis from the creation of each database until Jan 20, 2025. INCLUSION CRITERIA: (1) Research object: osteoarthritis. (2) Intervention measures: patients in the treatment group received dietary supplements, while the control group received placebos. (3) Research type: randomized controlled trials (RCTs). DATA EXTRACTION AND ANALYSIS: Two researchers independently examined the literature and retrieved data based on predefined criteria. The information gathered included the first author, year of publication, sample size, participant demographics, length of the follow-up period, intervention and control measures, and inclusion indications. RCTs comparing dietary supplements to placebo with the pain and function subscales of the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) among patients with osteoarthritis were included. The optimal dietary supplement was identified based on the total ranking by summing the surface under the cumulative ranking curve (SUCRA) of these two scores. Furthermore, the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) was used to confirm the quality of the evidence. RESULTS: Overall, 23 studies covering 21 dietary supplements and involving 2455 participants met the inclusion criteria. In the WOMAC pain score, the SUCRA of passion fruit peel extract was 91% (mean difference [MD]: -9.2; 95% confidence interval [CI]: [-16.0, -2.3]), followed by methylsulfonylmethane (89%), undenatured type II collagen (87%), collagen (84%), and Lanconone (82%). The SUCRA (99%) of passion fruit peel extract (MD: -41.0; 95% CI: [-66.0, -16.0]) ranked first in terms of the WOMAC function score, followed by Lanconone (95%), collagen (86%), ParActin (84%), and Lactobacillus casei strain Shirota (83%). The top three total rankings are passion fruit peel extract (95.0%), Lanconone (88.5%), and collagen (85.0%). However, the GRADE revealed low evidence quality. CONCLUSION Passion fruit peel extract was the best supplement for improving WOMAC pain and function scores in patients with osteoarthritis, followed by Lanconone and collagen. However, further large-scale, well designed RCTs are required to substantiate these promising findings. Please cite this article as: Chen CS, Wen L, Yang F, Deng YC, Ji JH, Chen RJ, Chen Z, Chen G, Gu JY. Effects of dietary supplements on patients with osteoarthritis: A systematic review and network meta-analysis. J Integr Med. 2025; 23(4): 357-369.
Humans ; Dietary Supplements ; Osteoarthritis/drug therapy* ; Randomized Controlled Trials as Topic