An integrated extraction-purification process was established in this work for efficient phycocyanin production from dried Spirulina platensispowder.Initially,phycocyanin was extracted from algal biomass using a combined swelling-enzymatic lysis strategy.Single-factor experiments were carried out to systematically evaluate the effects of critical parameters,including system pH,enzymatic hydrolysis duration,and temperature,on phycocyanin extraction yield.Subsequently,a three-factor,three-level Box-Behnken response surface methodology design was employed to optimize the extraction process,with phycocyanin concentration and purity in the extract serving as response variables.A predictive regression model identified optimal conditions as follows:pH 6.4,hydrolysis time 3.2 h,and temperature 35.4℃.Experimental validation under these conditions yielded a phycocyanin recovery of 26.6%.Following extraction,purification was achieved via a polyethylene glycol-phosphate aqueous two-phase extraction system,which elevated the final purity to 4.21.Results demonstrated that the swelling-enzymatic lysis approach effectively disrupted algal cellular structures,significantly enhancing phycocyanin release efficiency.Concurrently,the aqueous two-phase system enabled selective partitioning and enrichment of the target protein under mild conditions.The integrated process exhibited high extraction efficiency,gentle purification,and robust operability,rendering it suitable for the scalable production of natural phycocyanin.This work provided both methodological foundations and technical support for advancing phycocyanin applications in natural pigments,biomedicine,and analytical detection.

OBJECTIVE: To summarize the early clinical results and safety of Stand-alone OLIF application of lumbar lesions, and explored its surgical indications. METHODS: Total of 92 cases of lumbar spine lesions treated with Stand-alone OLIF at two medical centers from October 2014 to December 2018 were retrospectively analyzed, including 30 males and 62 females with an average age of (61.20±12.94) years old ranged from 32 to 83 years old. There were 20 cases of lumbar spinal stenosis, 15 cases of lumbar disc degeneration, 11 cases of lumbar degenerative spondylolisthesis, 6 cases of discogenic low back pain, 7 cases of giant lumbar disc herniation, 13 cases of primary lumbar discitis, 6 cases of adjacent vertebral disease after lumbar internal fixation surgery, and 14 cases of degenerative lumbar scoliosis. Pre-operative dual energy X-ray bone density examination 31 cases' T-values ranged from -1 to -2.4, 8 cases' T-values ranged from -2.5 to -3.5, and the rest had normal bone density. The number of fusion segments: 68 cases of single segment, 9 cases of two segment, 12 cases of three segment , and 3 cases of four segment. Fusion site:L_1,2 1 case, L_2,3 4 cases, L_3,4 10 cases, L_4,5 53 cases, L_2,3-L_3,4 3 cases, L_3,4-L_4,5 6 cases, L_1,2L_2,3L_3,4 1 case, L_1,2L_3,4L_4,5 1 case, L_2,3L_3,4L_4,5 10 cases, L_1,2L_2,3L_3,4L_4,5 3 cases. The clinical results and imaging results of this group of cases were observed, as well as the complications. RESULTS: The surgical time ranged from 40 to 140 minutes with an average of (60.92±27.40) minutes. The intraoperative bleeding volume was 20 to 720 ml with an average of (68.22±141.60) ml. The patients had a follow-up period of 6 to 84 months with an average of (38.50±12.75) months. The height of the intervertebral space recovered from (9.23±1.94) mm in preoperative to (12.68±2.01) mm in postoperative, and (9.11±1.72) mm at the last follow-up, there was a statistically significant difference(F=6.641, P=0.008);there was also a statistically significant difference between the postoperative and preoperative height of the intervertebral space(t=9.27, P<0.000 1);and there was also a statistically significant difference (t=10.06, P<0.000 1) between the last follow-up and postoperative height of the intervertebral space. At the last follow-up, cage subsidence grading was as follows:level 0 in 69 cases (76 segments), levelⅠin 17 cases (43 segments), level Ⅱin 5 cases (14 segments), and level Ⅲ in 1 case (1 segment);according to the number of segments, normal subsidence accounts for 56.72%, abnormal subsidence accounts for 43.28%. Bone mineral desity of normal subsidence groups was -0.50±0.07 whinch was better than that the abnormal subsidence groups -2.10±0.43, and the difference was statistically significant(χ²=2.275, P=0.014). As well as there was a statistically significant difference in the patient's VAS of backache from (6.28±2.11) in preoperative to (1.48±0.59) in last follow-up(t=8.56, P<0.05). The ODI recovered from (36.30±7.52)% before surgery to (10.20±2.50)% at the last follow-up, with a statistically significant difference (t=7.79, P<0.000 1). Complications involved 4 cases of intraoperative vascular injury, 21 cases of endplate injury, and 4 cases of combined vertebral fractures. The incision skin has no necrosis or infection. There were 4 cases of left sympathetic chain injury, 4 cases of transient left hip flexion weakness, 2 cases of left thigh anterolateral numbness with quadriceps femoris weakness, and 1 case of incomplete intestinal obstruction;8 cases were treated with posterior pedicle screw fixation due to fusion cage settlement accompanied by stubborn lower back pain, and 6 cases were treated with fusion cage settlement and lateral displacement. According to the actual number of cases, there were 38 complications, with an incidence rate of 41.3%. CONCLUSION The application of Stand alone OLIF in lumbar spine disease fusion has achieved good early results, with obvious clinical advantages, but also there are high probability of complications. It is recommended to choose carefully. It is necessary to continuously summarize and gradually clarify and complete the surgical indications and specific case selection criteria.
Humans ; Male ; Female ; Middle Aged ; Spinal Fusion/methods* ; Lumbar Vertebrae/injuries* ; Aged ; Adult ; Retrospective Studies ; Aged, 80 and over

Investigating the correlation between micronucleus formation and male infertility has the potential to improve clinical diagnosis and deepen our understanding of pathological progression. Our study enrolled 2252 male patients whose semen was analyzed from March 2023 to July 2023. Their clinical data, including semen parameters and age, were also collected. Genetic analysis was used to determine whether the sex chromosome involved in male infertility was abnormal (including the increase, deletion, and translocation of the X and Y chromosomes), and subsequent semen analysis was conducted for clinical grouping purposes. The participants were categorized into five groups: normozoospermia, asthenozoospermia, oligozoospermia, oligoasthenozoospermia, and azoospermia. Patients were randomly selected for further study; 41 patients with normozoospermia were included in the control group and 117 patients with non-normozoospermia were included in the study group according to the proportions of all enrolled patients. Cytokinesis-block micronucleus (CBMN) screening was conducted through peripheral blood. Statistical analysis was used to determine the differences in micronuclei (MNi) among the groups and the relationships between MNi and clinical data. There was a significant increase in MNi in infertile men, including those with azoospermia, compared with normozoospermic patients, but there was no significant difference between the genetic and nongenetic groups in azoospermic men. The presence of MNi was associated with sperm concentration, progressive sperm motility, immotile spermatozoa, malformed spermatozoa, total sperm count, and total sperm motility. This study underscores the potential utility of MNi as a diagnostic tool and highlights the need for further research to elucidate the underlying mechanisms of male infertility.
Humans ; Male ; Infertility, Male/genetics* ; Adult ; Micronucleus Tests ; Semen Analysis ; Oligospermia/genetics* ; Azoospermia/genetics* ; Chromosome Aberrations ; Sperm Count ; Micronuclei, Chromosome-Defective ; Middle Aged

Pulmonary alveolar proteinosis(PAP)is a rare progressive respiratory dysfunction disease of the lung characterized by insidious onset and non-specific clinical manifestations,often leading to misdiagnosed and mistreated.Herein,we reported a case of PAP patient admitted to Jiading District Central Hospital with an atypical appearance of alveolar lavage fluid and whose condition improved significantly after treatment with subcutaneous injection of recombinant human granulocyte-macrophage colony stimulating factor(GM-CSF).Additionally,we have reviewed and summarized the relevant literature to enhance the understanding of the diagnosis and treatment of this disease.

Objective To deeply understand the anatomical basis of temporomandibular joint disorders,and explore and master the pathological characteristics of anterior displacement of temporomandibular joint disc through cadaveric dissection and 3D printing technology.Methods By dissecting the temporomandibular joints of 40 head and neck specimens,the bilateral structures of the temporomandibular joints were measured to obtain condyle and articular disc data.3D modeling was carried out using 3ds Max software and printed out a model of temporomandibular joint.The pathological model of the anterior disc displacement with reduction(ADDwR)was simulated by adjusting the opening degree,the position of the articular disk,and the position of the condyle of the model.Results The precise data of the right and left temporomandibular joint discs and condyle were successfully obtained by dissection and measurement.The thickness of the anterior band of left temporomandibular joint discs was(2.02±0.57)mm,the thickness of the middle band was(1.46±0.33)mm,the thickness of the posterior band was(3.00±0.46)mm,the anterior-posterior diameter was(9.60±0.72)mm,and the internal-external diameter was(17.73±0.84)mm.While the thickness of the anterior band of right temporomandibular joint discs was(1.84±0.35)mm,and the thickness of the middle band was(1.43±0.28)mm,the thickness of posterior band was(3.08±0.49)mm,the anterior-posterior diameter was(9.30±0.88)mm,and the internal-external diameter was(17.38±1.10)mm.The internal-external diameter of the left temporomandibular joint condyle was(18.97±0.41)mm,and the anterior-posterior diameter was(8.56±0.43)mm;the internal-external diameter of the right temporomandibular joint condyle was(18.86±0.75)mm,and the anterior-posterior diameter was(8.40±0.30)mm.The standard temporomandibular joint model was printed out by the measured data.The model was utilized to simulate the physiological state of temporomandibular joint under normal conditions,as well as the three pathological states of closed mouth,closed mouth to open mouth,and open mouth in the case of ADDwR.Conclusion The temporomandibular joint model can more intuitively present the changes of anatomical structure in reversible temporoman-dibular joint disorders,which is helpful for understanding and mastering the different classification of this disease.

Objective To deeply understand the anatomical basis of temporomandibular joint disorders,and explore and master the pathological characteristics of anterior displacement of temporomandibular joint disc through cadaveric dissection and 3D printing technology.Methods By dissecting the temporomandibular joints of 40 head and neck specimens,the bilateral structures of the temporomandibular joints were measured to obtain condyle and articular disc data.3D modeling was carried out using 3ds Max software and printed out a model of temporomandibular joint.The pathological model of the anterior disc displacement with reduction(ADDwR)was simulated by adjusting the opening degree,the position of the articular disk,and the position of the condyle of the model.Results The precise data of the right and left temporomandibular joint discs and condyle were successfully obtained by dissection and measurement.The thickness of the anterior band of left temporomandibular joint discs was(2.02±0.57)mm,the thickness of the middle band was(1.46±0.33)mm,the thickness of the posterior band was(3.00±0.46)mm,the anterior-posterior diameter was(9.60±0.72)mm,and the internal-external diameter was(17.73±0.84)mm.While the thickness of the anterior band of right temporomandibular joint discs was(1.84±0.35)mm,and the thickness of the middle band was(1.43±0.28)mm,the thickness of posterior band was(3.08±0.49)mm,the anterior-posterior diameter was(9.30±0.88)mm,and the internal-external diameter was(17.38±1.10)mm.The internal-external diameter of the left temporomandibular joint condyle was(18.97±0.41)mm,and the anterior-posterior diameter was(8.56±0.43)mm;the internal-external diameter of the right temporomandibular joint condyle was(18.86±0.75)mm,and the anterior-posterior diameter was(8.40±0.30)mm.The standard temporomandibular joint model was printed out by the measured data.The model was utilized to simulate the physiological state of temporomandibular joint under normal conditions,as well as the three pathological states of closed mouth,closed mouth to open mouth,and open mouth in the case of ADDwR.Conclusion The temporomandibular joint model can more intuitively present the changes of anatomical structure in reversible temporoman-dibular joint disorders,which is helpful for understanding and mastering the different classification of this disease.

Pulmonary alveolar proteinosis(PAP)is a rare progressive respiratory dysfunction disease of the lung characterized by insidious onset and non-specific clinical manifestations,often leading to misdiagnosed and mistreated.Herein,we reported a case of PAP patient admitted to Jiading District Central Hospital with an atypical appearance of alveolar lavage fluid and whose condition improved significantly after treatment with subcutaneous injection of recombinant human granulocyte-macrophage colony stimulating factor(GM-CSF).Additionally,we have reviewed and summarized the relevant literature to enhance the understanding of the diagnosis and treatment of this disease.

Objective To compare the efficacy and safety between hypofractionated radiotherapy(HyRt)and conventional radiotherapy after breast-conserving surgery.Methods This study was a single-center,prospective,randomized controlled study.Eighty-three patients with pTis-T2N0M0 breast cancer admitted to Tangshan People's Hospital from May 2017 to May 2019 were included.The patients received breast-conserving surgery+sentinel lymph node biopsy(SLNB).After surgery,they were treated with intensity modulated radiation therapy(IMRT).According to random table method,patients were divided into HyRt group(n=41)and conventional radiotherapy group(n=42).The dose of organs at risk,treatment efficacy,treatment failure modes,and radiotherapy related adverse reactions were analyzed in the two groups.The radiotherapy-related adverse reactions were evaluated according to NCI CTC AE Version 3.0,including radiation dermatitis,radiation pneumonia,breast/skin fibrosis,pulmonary fibrosis,etc.Results Eighty-three patients with breast cancer were included,with a median age of 44(26-67)years.There was no statistically significant difference in clinical parameters such as age(P=0.443),TNM stage(P=0.335),molecular typing(P=0.333),degree of differentiation(P=0.617),and pathological type(P=0.127)between the two groups of patients.Compared with conventional radiotherapy group,the V5(25.6％vs.33.8％,P=0.015),V20(13.3％vs.17.2％,P=0.042),and the mean radiation dose(MLD;7.4 Gy vs.10.4 Gy,P=0.020)of the affected lung of HyRt group significantly decreased.Only 3 patients in this study experienced distant metastasis,and no regional lymph node metastasis or local recurrence was observed.There was no significant difference in PFS rate at 2 years between HyRt group and conventional radiotherapy group(94.4％vs.85.2％,P=0.818).Compared with conventional radiotherapy group,the incidence of≥grade Ⅱ irradiation dermatitis in HyRt group was significantly reduced(2.4％vs.21.4％,P=0.015).There was no difference in the incidence of grade Ⅰ breast/skin fibrosis(19.5％vs.14.3％,P=0.570)between the two groups,and no grade Ⅲ radiotherapy-related side effects were observed in the two groups.Conclusions Compared with conventional radiotherapy with simultaneously integrated boosting-intensity modulated radiotherapy,the patients who received HyRt after breast-conserving surgery for early-stage breast cancer have good tolerance and low incidence of adverse reactions.HyRt can be used as the first option of radiation therapy.

Objective To observe the cage subsidence after oblique lateral interbody fusion(OLIF)for lumbar spondylo-sis,summarize the characteristics of the cage subsidence,analyze causes,and propose preventive measures.Methods The data of 144 patients of lumbar spine lesions admitted to our hospital from October 2015 to December 2018 were retrospectively ana-lyzed.There were 43 males and 101 females,and the age ranged from 20 to 81 years old,with an average of(60.90±10.06)years old.Disease types:17 patients of lumbar intervertebral disc degenerative disease,12 patients of giant lumbar disc hernia-tion,5 patients of discogenic low back pain,33 patients of lumbar spinal stenosis,26 patients of lumbar degenerative spondy-lolisthesis,28 patients of lumbar spondylolisthesis with spondylolisthesis,11 patients of adjacent vertebral disease after lumbar internal fixation,7 patients of primary spondylitis in the inflammatory outcome stage,and 5 patients of lumbar degenerative scoliosis.Preoperative dual-energy X-ray bone mineral density examination showed 57 patients of osteopenia or osteoporosis,and 87 patients of normal bone density.The number of fusion segments:124 patients of single-segment,11 patients of two-seg-ment,8 patients of three-segment,four-segment 1 patient.There were 40 patients treated by stand-alone OLIF,and 104 patients by OLIF combined with posterior pedicle screw.Observed the occurrence of fusion cage settlement after operation,conducted monofactor analysis on possible risk factors,and observed the influence of fusion cage settlement on clinical results.Results All operations were successfully completed,the median operation time was 99 min,and the median intraoperative blood loss was 106 ml.Intraoperative endplate injury occurred in 30 patients and vertebral fracture occurred in 5 patients.The mean follow-up was(14.57±7.14)months from 6 to 30 months.During the follow-up,except for the patients of primary lumbar interstitial in-flammation and some patients of lumbar spondylolisthesis with spondylolisthesis,the others all had different degrees of cage subsidence.Cage subsidence classification:119 patients were normal subsidence,and 25 patients were abnormal subsidence(23 patients were grade Ⅰ,and 2 patients were grade Ⅱ).There was no loosening or rupture of the pedicle screw system.The height of the intervertebral space recovered from the preoperative average(9.48±1.84)mm to the postoperative average(12.65±2.03)mm,and the average(10.51±1.81)mm at the last follow-up.There were statistical differences between postop-erative and preoperative,and between the last follow-up and postoperative.The interbody fusion rate was 94.4％.The low back pain VAS decreased from the preoperative average(6.55±2.2 9)to the last follow-up(1.40±0.82),and there was statistically significant different.The leg pain VAS decreased from the preoperative average(4.72±1.49)to the final follow-up(0.60± 0.03),and the difference was statistically significant(t=9.13,P＜0.000 1).The ODI index recovered from the preoperative av-erage(38.50±6.98)％to the latest follow-up(11.30±3.27)％,and there was statistically significant different.The complication rate was 31.3％(45/144),and the reoperation rate was 9.72％(14/144).Among them,8 patients were reoperated due to fusion cage subsidence or displacement,accounting for 57.14％(8/14)of reoperation.The fusion cage subsidence in this group had obvious characteristics.The monofactor analysis showed that the number of abnormal subsidence patients in the osteopenia or osteoporosis group,Stand-alone OLIF group,2 or more segments fusion group,and endplate injury group was higher than that in the normal bone mass group,OLIF combined with pedicle screw fixation group,single segment fusion group,and no endplate injury group,and the comparison had statistical differences.Conclusion Cage subsidence is a common phenomenon after 0-LIF surgery.Preoperative osteopenia or osteoporosis,Stand-alone OLIF,2 or more segments of fusion and intraoperative end-plate injury may be important factors for postoperative fusion cage subsidence.Although there is no significant correlation be-tween the degree of cage subsidence and clinical symptoms,there is a risk of cage migration,and prevention needs to be strengthened to reduce serious complications caused by fusion of cage subsidence,including reoperation.

Objective:To explore the effects of posterior malleolar fracture fixation on the rotational stability of the ankle joint.Methods:A total of 20 fresh cadaveric specimens of lower limbs were anatomized to measure the area of attachment of the posterior inferior tibiofibular ligament and transverse ligament complex to the posterior surface of the tibia. One healthy volunteer was selected to construct a finite element model for the intact tibiofibular and ankle joints and finite element models for posterior malleolar fracture with different posterior projection areas. A load of 600 N was vertically applied to the inferior calcaneus along the tibial mechanical axis. The contact area and maximum Von Mises stress of the distal tibial articular surface were analyzed to verify the validity of the model for the intact tibiofibular and ankle joints. In the finite element models for the posterior malleolar fracture (S, 1/2S, 1/4S, 1/8S and 1/16S model groups, with S standing for the complete projection area of the ligament complex on the posterior surface of the tibia), the width increase in the tibiofibular clear space was measured when a vertical load of 600 N and external rotation load of 5 N·m were applied to the ankle joint after the reduction and fixation of posterior malleolar fracture. The cutoff value of the posterior projection area of posterior malleolar fracture that could maintain the rotational stability of the ankle joint was assessed.Results:The measurement results of the cadaveric specimens showed that the area of attachment of the posterior inferior tibiofibular ligament and transverse ligament complex to the posterior surface of the tibia was relatively large. It was attached to the posterolateral area of the distal tibia with the highest point located at (45.2±5.6)mm from the articular surface. With the increase in the distance from the joint line, the width of the posterior attachment area of the ligament complex was decreased. Results of the finite element analysis showed that in the finite element model for the intact tibiofibular and ankle joints, the tibiotalar joint contact area was 324.02 mm 2 and the maximum Von Mises stress was 4.495 1 MPa with a vertical load of 600 N. In the finite element models for the posterior malleolar fracture, the distal tibiofibular clear spaces of the S, 1/2S, 1/4S and 1/8S model groups increased by less than 2 mm following loading, while it was increased by 3.445 8 mm in the 1/16S model group. The cutoff value of the posterior tibial projection area that could maintain the rotational stability of the ankle joint was 1/8S. Conclusions:The attachment area of the posterior inferior tibiofibular ligament and transverse ligament complex to the posterior surface of the tibia is large. Both the axial stability and rotational stability of the ankle joint should be considered in the treatment selection for posterior malleolar fracture. Simple posterior malleolar fixation is recommended to restore the rotational stability and axial stability of the ankle joint when tibiofibular syndesmosis is unstable and the cutoff value is larger than or equal to 1/8, while tibiofibular syndesmosis screws must be implanted when tibiofibular syndesmosis is unstable and the cutoff value is less than 1/8.