Objective:To develop a 3D-printed extraocular muscle teaching model and evaluate its teaching effect and learning experience among residents in standardized training.Methods:A total of 24 residents in standardized training who entered the Department of Ophthalmology, Peking Union Medical College Hospital from 2022 to 2024 were included, with 10, 7, and 7 residents in the first, second, and third grades, respectively. A simulated orbit and movable eyeball were constructed based on 3D printing technology. Tractionable elastic silicone bands were arranged on it to simulate healthy extraocular muscles, and non-elastic ropes were used to simulate diseased extraocular muscles. The model was applied in teaching rounds. Before and after the rounds, the residents were tested on basic knowledge (including diagnosis and judgment of surgical indications, with a full score of 40) and core knowledge (including judgment of mainly involved extraocular muscles and surgical design, with a full score of 60). Pearson correlation analysis was used to evaluate the correlation between the residents′ grades and their scores before the rounds, scores after the rounds, and score increments. A questionnaire survey (full score of 100) was conducted to assess their learning experience.Results:Before the teaching rounds, the average basic knowledge score of all residents was (21.0±7.5) and the core knowledge score was (11.3±7.7). These scores were positively correlated with the residents′ grades ( r=0.74, 0.69, all P<0.001) but generally low. After the teaching rounds, the basic knowledge score increased to (31.7±4.6), and the core knowledge score increased significantly to (48.5±3.8). There were no statistically significant differences in these scores among different grades ( P=0.22, P=0.83). The increments of basic knowledge and core knowledge scores decreased with the increase of residents′ grades, with statistically significant correlations ( r=-0.60, -0.65; P=0.002, P=0.001). The average scores of all residents in appearance, convenience, effectiveness, and total score were (18.2±1.1), (26.6±2.2), (40.0±4.0), and (84.8±5.0), respectively. There was no statistically significant correlation between these scores and the residents′ grades ( P=0.24, P=0.84, P=0.25, P=0.58). Suggestions for improving the current teaching model included: increasing the model size for long-distance viewing; enhancing the adhesion between silicone bands (simulating eye muscles) and the simulated eyeball; reducing the friction between the inner sphere and outer shell of the simulated eyeball to improve the model′s maneuverability and flexibility. Conclusions:The 3D-printed extraocular muscle teaching model can help residents of all grades quickly master the key and difficult points in learning restrictive strabismus caused by thyroid-associated ophthalmopathy. In clinical teaching of complex ocular diseases related to systemic diseases, constructing physical teaching models can effectively improve teaching effects and students′ learning experience.

Objective:To evaluate the clinical efficacy of a novel reduction device in the treatment of A3N0/1 thoracolumbar fracture using navigation-assisted techniques.Methods:A retrospective analysis was conducted on 45 patients (29 males, 16 females; mean age 40.67±16.11 years, range 24-57) with thoracolumbar fractures who underwent fracture reduction and pedicle screw fixation via the Wiltse approach at Zhengzhou Orthopaedic Hospital between January 2022 and January 2023. Injury levels included: T 10 in 2 cases, T 11 in 5 cases, T 12 in 13 cases, L 1 in 20 cases, L 2 in 3 cases, L 3 in 2 cases. All patients underwent fracture reduction via the Wiltse approach using the spinal fracture reduction instrument for vertebral body reduction. Among them, 20 patients received O-arm navigation-assisted internal fixation and vertebral reduction (O-arm group), while 25 received C-arm fluoroscopy-guided internal fixation and vertebral reduction (C-arm group). Operative time, intraoperative blood loss, vertebral reduction time using the instrument, first-time screw placement success rate, screw placement accuracy, and complications were compared. Mid-vertebral body height ratio (MVBHr), local Cobb angle of the fractured vertebra, visual analogue scale (VAS) score, and Oswestry disability index (ODI) were compared preoperatively, at 1 week postoperatively, 3 months postoperatively, and final follow-up. Results:All surgeries were successfully completed in both groups. Operative time was significantly shorter in the O-arm group (106.8±14.4 min) than in the C-arm group (119.1±16.4 min, P<0.05). All patients were followed up for a mean duration of 15.9±3.9 months (range 12-20 months). Vertebral reduction time was significantly shorter in the O-arm group (11.0±2.2 min) than in the C-arm group (20.4±5.7 min, P<0.05). The first-time screw placement success rate was significantly higher in the O-arm group (100%) than in the C-arm group (95.3%, P<0.05). Screw placement accuracy (Grade I) was significantly higher in the O-arm group (117 screws, 97.5%) than in the C-arm group (136 screws, 90.7%, P<0.05). No cases of wrong-level surgery, infection, or spinal cord/nerve injury occurred. Both groups showed significant improvements in MVBHr, Cobb angle, VAS, and ODI at all postoperative time points compared to preoperative values ( P<0.05). At final follow-up, the O-arm group demonstrated significantly better outcomes than the C-arm group in MVBHr (90.6%±4.5% vs. 86.4%±6.9%, P<0.05), Cobb angle (7.6°±1.8° vs. 10.1°±3.2°, P<0.05), VAS (1.3±0.4 vs. 1.7±0.6, P<0.05), and ODI (4.6%±1.9% vs. 7.7%±2.0%, P<0.01). Conclusion:O-arm navigation-assisted intrasegmental push reduction for A3N0/1 type thoracolumbar fractures demonstrates advantages including faster and more accurate screw placement, precise reduction with improved outcomes, and significant postoperative pain relief.

As the number of patients with compromised immune function increases and fungal resistance develops, so does the risk of contracting deadly fungi in humans. Both fungi and humans are eukaryotes, so identifying unique targets for antifungal drug development is difficult. In addition, the existing antifungal drugs are limited by toxicity, drug interaction and drug resistance in practical application, which leads to the increasing incidence and fatal rate of fungal infections. Therefore, it is urgent to develop new antifungal drugs. The semi-synthetic technology using microbial fermentation products from natural sources as lead compounds has become the most used method in structural modification of antifungal drugs due to its advantages of few reaction steps and easy operation. This paper will introduce the current status of natural antifungal drugs in clinical use, as well as the latest progress in the research and development of new semi-synthetic antifungal drugs, and summarize their mechanism of action, structural modifications, advantages and disadvantages, so as to provide reference for the subsequent development of new antifungal drugs.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective To assess the situation and influencing factors of occupational burnout among the staff at the Center for Disease Control and Prevention (CDC) in Sichuan Province. Methods A total of 1 038 CDC staff members in Sichuan Province were selected as the study subjects using the stratified random sampling method. Occupational burnout of the staff was assessed using the Maslach Burnout Inventory General Survey via an online questionnaire. Results The detection rate of occupational burnout was 42.3% (439/1 038). Binary logistic regression analysis result showed that, after controlling for confounding factors such as education level and alcohol consumption, CDC staffs aged at 20-<31, 31-<41, and 41-<51 years were at higher risk of occupational burnout compared with those ≥51 years (all P<0.05). CDC staffs with 5-<10 or ≥10 years of service had higher occupational burnout risk compared with those with <5 years (both P<0.05). CDC staffs with poor or fair health status, irregular diet, and poor sleep quality had higher risk of occupational burnout compared with those healthy, have regular diet, and good sleep quality (all P<0.05). The risk of occupational burnout increased with higher overtime frequency (all P<0.05). Conclusion Occupational burnout among CDC staffs in Sichuan Province is relatively high. Age, years of service, health status, diet, sleep quality, and overtime frequency are key influencing factors.

OBJECTIVE: To investigate the association between ABO blood types and gestational diabetes mellitus (GDM) risk. METHODS: A prospective birth cohort study was conducted. ABO blood types were determined using the slide method. GDM diagnosis was based on a 75-g, 2-h oral glucose tolerance test (OGTT) according to the criteria of the International Association of Diabetes and Pregnancy Study Groups. Logistic regression was applied to calculate the odds ratios ( ORs) and 95% confidence intervals ( CIs) between ABO blood types and GDM risk. RESULTS: A total of 30,740 pregnant women with a mean age of 31.81 years were enrolled in this study. The ABO blood types distribution was: type O (30.99%), type A (26.58%), type B (32.20%), and type AB (10.23%). GDM was identified in 14.44% of participants. Using blood type O as a reference, GDM risk was not significantly higher for types A ( OR = 1.05) or B ( OR = 1.04). However, women with type AB had a 19% increased risk of GDM ( OR = 1.19, 95% CI = 1.05-1.34; P < 0.05), even after adjusting for various factors. This increased risk for type AB was consistent across subgroup and sensitivity analyses. CONCLUSION The ABO blood types may influence GDM risk, with type AB associated with a higher risk. Incorporating it-either as a single risk factor or in combination with other known factors-could help identify individuals at risk for GDM before or during early pregnancy.
Humans ; Female ; Pregnancy ; Diabetes, Gestational/etiology* ; ABO Blood-Group System ; Adult ; Prospective Studies ; Risk Factors ; Young Adult

Objective:To evaluate the clinical efficacy of a novel reduction device in the treatment of A3N0/1 thoracolumbar fracture using navigation-assisted techniques.Methods:A retrospective analysis was conducted on 45 patients (29 males, 16 females; mean age 40.67±16.11 years, range 24-57) with thoracolumbar fractures who underwent fracture reduction and pedicle screw fixation via the Wiltse approach at Zhengzhou Orthopaedic Hospital between January 2022 and January 2023. Injury levels included: T 10 in 2 cases, T 11 in 5 cases, T 12 in 13 cases, L 1 in 20 cases, L 2 in 3 cases, L 3 in 2 cases. All patients underwent fracture reduction via the Wiltse approach using the spinal fracture reduction instrument for vertebral body reduction. Among them, 20 patients received O-arm navigation-assisted internal fixation and vertebral reduction (O-arm group), while 25 received C-arm fluoroscopy-guided internal fixation and vertebral reduction (C-arm group). Operative time, intraoperative blood loss, vertebral reduction time using the instrument, first-time screw placement success rate, screw placement accuracy, and complications were compared. Mid-vertebral body height ratio (MVBHr), local Cobb angle of the fractured vertebra, visual analogue scale (VAS) score, and Oswestry disability index (ODI) were compared preoperatively, at 1 week postoperatively, 3 months postoperatively, and final follow-up. Results:All surgeries were successfully completed in both groups. Operative time was significantly shorter in the O-arm group (106.8±14.4 min) than in the C-arm group (119.1±16.4 min, P<0.05). All patients were followed up for a mean duration of 15.9±3.9 months (range 12-20 months). Vertebral reduction time was significantly shorter in the O-arm group (11.0±2.2 min) than in the C-arm group (20.4±5.7 min, P<0.05). The first-time screw placement success rate was significantly higher in the O-arm group (100%) than in the C-arm group (95.3%, P<0.05). Screw placement accuracy (Grade I) was significantly higher in the O-arm group (117 screws, 97.5%) than in the C-arm group (136 screws, 90.7%, P<0.05). No cases of wrong-level surgery, infection, or spinal cord/nerve injury occurred. Both groups showed significant improvements in MVBHr, Cobb angle, VAS, and ODI at all postoperative time points compared to preoperative values ( P<0.05). At final follow-up, the O-arm group demonstrated significantly better outcomes than the C-arm group in MVBHr (90.6%±4.5% vs. 86.4%±6.9%, P<0.05), Cobb angle (7.6°±1.8° vs. 10.1°±3.2°, P<0.05), VAS (1.3±0.4 vs. 1.7±0.6, P<0.05), and ODI (4.6%±1.9% vs. 7.7%±2.0%, P<0.01). Conclusion:O-arm navigation-assisted intrasegmental push reduction for A3N0/1 type thoracolumbar fractures demonstrates advantages including faster and more accurate screw placement, precise reduction with improved outcomes, and significant postoperative pain relief.

Objective: To investigate the effect and mechanism of methyltransferase-like3(METTL3),which functions as m6A modification methyltransferase,on the cellular proliferation,clone formation and migration of nonsmall cell lung cancer(NSCLC) cells. Methods: The METTL3 level and patient overall survival were analyzed by bioinformatics.In the transfected A549 cells,the expression of METTL3 was detected by RT-PCR and Western blot assays,the m6A level was detected by m6A RNA Methylation Assay kit,the cellular viability and growth were detected by CCK-8 assay,the apoptosis was detected by immunofluorescent assay,the colony growth was detected by clone formation assay,the cell migration growth was detected by scratch. Results : Bioinformatics showed that METTL3 was highly expressed in NSCLC and negatively correlated with patient overall survival.The RT-PCR and Western blot data showed that the METTL3 level was higher in NSCLC cells.Moreover,higher METTL3 significantly promoted m6A level,cell proliferation,colony formation,migration,inhibited cell apoptosis,increased the mRNA and protein expressions of EMT-related marker Vimentin but inhibited apoptosis and decreased the mRNA and protein expressions of EMT-related marker E-cadherin in the A549 cells.Furthermore,the contrasting results were obtained in the A549 cells with the knockdown of METTL3. Conclusion The over-expressed METTL3 increases the m6A levels in NSCLC cells and promotes cellular proliferation,colony formation,and migration growth,thereby laying a theoretical foundation for future research on early diagnosis and targeted drug development for NSCLC by targeting METTL3.

Catechol(CC)is a highly toxic phenolic pollutant,and its sensitive detection holds significant importance for environmental monitoring.Herein,graphene was used as a template to prepare graphdiyne/graphene(GDY/GR)heterogeneous materials,serving as high-performance electrochemical sensing materials for CC determination.GR played the role of an epitaxial template during the growth of GDY.The electrochemical experiment results demonstrated that the glassy carbon electrode(GCE)modified with GDY/GR showed excellent electrochemical response to CC,with a wide linear detection range(1-900 μmol/L)and a low detection limit(0.11 μmol/L).Meanwhile,GDY/GR/GCE also exhibited good anti-interference ability,stability and reproducibility.More importantly,the practicality of GDY/GR/GCE was evaluated and satisfactory results were obtained in actual water samples,which showed significant potential for practical applications in environmental monitoring.