Objective:To investigate the value of coronary CTA (CCTA)-based traditional features and radiomics of plaque in the identification of culprit lesions that caused acute myocardial infarction (AMI).Methods:This was a retrospective multicenter study. From July 2016 to November 2023, a total of 344 patients from the Affiliated Hospital of Qingdao University (training cohort, n=184), Shandong Provincial Hospital Affiliated to Shandong First Medical University (validation cohort, n=88) and Qilu Hospital of Shandong University (test cohort, n=72) who received percutaneous coronary intervention (PCI) due to AMI and underwent CCTA within 48 hours of AMI were enrolled. The culprit plaques and non-culprit plaques were identified using a combination of electrocardiogram, CCTA, and angiographic findings. The vessel, plaque location, plaque type, Coronary Artery Disease-Reporting and Data System (CAD-RADS) score, high-risk plaque characteristics, plaque length, plaque volume, and burden were analyzed, and 1 904 radiomics features were extracted for each plaque. The traditional imaging model, the radiomics model, and the combined model were established by using multivariate Logistic regression analysis. The area under the receiver operating characteristic curve (AUC) was used to evaluate the performance of each model in identifying culprit lesions. The DeLong test was used for the comparison of AUC between every two models. The net reclassification index (NRI) was used to evaluate the incremental value of the combined model to the traditional imaging model and the radiomics model. The decision curve analysis (DCA) was used to assess the clinical net benefit of these models. A correlation heatmap was used to evaluate the correlation between the radiomics score and traditional CCTA factors. The interpretable analysis of the decision process of the combined model was performed by the Shapley Additive exPlanations (SHAP). Results:In the validation cohort and the test cohort, the AUC of the traditional imaging model developed by the vessel, plaque type, positive remodeling and CAD-RADS score was 0.898 (95% CI 0.869-0.922) and 0.881 (95% CI 0.848-0.910), respectively. The radiomics model developed by six radiomics features was 0.863 (95% CI 0.831-0.891) and 0.863 (95% CI 0.827-0.864), respectively. The AUC of the combined model was 0.930 (95% CI 0.905-0.950)and 0.919 (95% CI 0.889-0.942), respectively. In the validation cohort and the test cohort, the AUC of the combined model was higher than that of the traditional imaging model ( Z=4.013, 4.272, P<0.001) and that of the radiomics model ( Z=4.819, 3.784, P<0.001), respectively. In the validation cohort, the combined model yielded an NRI of 20.43% (95% CI 10.43%-30.44%, P<0.001) and 20.21% (95% CI 9.62%-30.80%, P<0.001) for identifying culprit lesions compared with the traditional imaging model and the radiomics model, respectively. In the test cohort, the combined model yielded an NRI of 28.05% (95% CI 16.72%-39.38%, P<0.001) and 23.57% (95% CI 13.58%-33.56%, P<0.001) for identifying culprit lesions compared with the traditional imaging model and the radiomics model, respectively. DCA showed the combined model had the highest clinical net benefit. The correlation heatmap showed the radiomics score was not correlated or only weakly correlated with traditional CCTA factors. SHAP indicated the radiomics and CAD-RADS score contributed significantly to the model. Conclusion:The CCTA-based traditional features and radiomics of plaque have favorable performance for the identification of culprit plaques in patients with AMI.

Objective:To investigate the value of coronary CTA (CCTA)-based traditional features and radiomics of plaque in the identification of culprit lesions that caused acute myocardial infarction (AMI).Methods:This was a retrospective multicenter study. From July 2016 to November 2023, a total of 344 patients from the Affiliated Hospital of Qingdao University (training cohort, n=184), Shandong Provincial Hospital Affiliated to Shandong First Medical University (validation cohort, n=88) and Qilu Hospital of Shandong University (test cohort, n=72) who received percutaneous coronary intervention (PCI) due to AMI and underwent CCTA within 48 hours of AMI were enrolled. The culprit plaques and non-culprit plaques were identified using a combination of electrocardiogram, CCTA, and angiographic findings. The vessel, plaque location, plaque type, Coronary Artery Disease-Reporting and Data System (CAD-RADS) score, high-risk plaque characteristics, plaque length, plaque volume, and burden were analyzed, and 1 904 radiomics features were extracted for each plaque. The traditional imaging model, the radiomics model, and the combined model were established by using multivariate Logistic regression analysis. The area under the receiver operating characteristic curve (AUC) was used to evaluate the performance of each model in identifying culprit lesions. The DeLong test was used for the comparison of AUC between every two models. The net reclassification index (NRI) was used to evaluate the incremental value of the combined model to the traditional imaging model and the radiomics model. The decision curve analysis (DCA) was used to assess the clinical net benefit of these models. A correlation heatmap was used to evaluate the correlation between the radiomics score and traditional CCTA factors. The interpretable analysis of the decision process of the combined model was performed by the Shapley Additive exPlanations (SHAP). Results:In the validation cohort and the test cohort, the AUC of the traditional imaging model developed by the vessel, plaque type, positive remodeling and CAD-RADS score was 0.898 (95% CI 0.869-0.922) and 0.881 (95% CI 0.848-0.910), respectively. The radiomics model developed by six radiomics features was 0.863 (95% CI 0.831-0.891) and 0.863 (95% CI 0.827-0.864), respectively. The AUC of the combined model was 0.930 (95% CI 0.905-0.950)and 0.919 (95% CI 0.889-0.942), respectively. In the validation cohort and the test cohort, the AUC of the combined model was higher than that of the traditional imaging model ( Z=4.013, 4.272, P<0.001) and that of the radiomics model ( Z=4.819, 3.784, P<0.001), respectively. In the validation cohort, the combined model yielded an NRI of 20.43% (95% CI 10.43%-30.44%, P<0.001) and 20.21% (95% CI 9.62%-30.80%, P<0.001) for identifying culprit lesions compared with the traditional imaging model and the radiomics model, respectively. In the test cohort, the combined model yielded an NRI of 28.05% (95% CI 16.72%-39.38%, P<0.001) and 23.57% (95% CI 13.58%-33.56%, P<0.001) for identifying culprit lesions compared with the traditional imaging model and the radiomics model, respectively. DCA showed the combined model had the highest clinical net benefit. The correlation heatmap showed the radiomics score was not correlated or only weakly correlated with traditional CCTA factors. SHAP indicated the radiomics and CAD-RADS score contributed significantly to the model. Conclusion:The CCTA-based traditional features and radiomics of plaque have favorable performance for the identification of culprit plaques in patients with AMI.

Objective To investigate the diagnostic value of multimodality-enhanced CT-based radiomics nomogram for muscle-inva-sive bladder urothelial carcinoma.Methods A retrospective analysis was performed on the preoperative data of 644 patients with pathologically confirmed bladder urothelial carcinoma from three medical centers.Region of interest(ROI)were drawn on preopera-tive contrast-enhanced CT images,and radiomics features were extracted.Patients from medical center 1 were randomly divided into training set and internal validation set in a 7∶3 ratio,while patients from medical centers 2 and 3 were combined as an external val-idation set.The diagnostic performance of the models was evaluated using receiver operating characteristic(ROC)curve.Results In the external validation set,the area under the curve(AUC)for diagnosing muscle-invasive bladder urothelial carcinoma using the multi-phase fusion radiomics model was 0.861[95％ confidence interval(CI)0.811-0.911].The nomogram constructed by combi-ning the multi-phase fusion radiomics model with clinical factors achieved an AUC of 0.901(95％ CI 0.862-0.939).Conclusion The nomogram combining multimodality-enhanced CT-based radiomics with clinical factors can effectively diagnose muscle-invasive bladder urothelial carcinoma.

OBJECTIVE: To compare the effectiveness of a zero-profile three-dimensiaonal (3D)-printed microporous titanium alloy Cage and a conventional titanium plate combined with a polyether-ether-ketone (PEEK)-Cage in the treatment of single-segment cervical spondylotic myelopathy (CSM) by anterior cervical discectomy and fusion (ACDF). METHODS: The clinical data of 83 patients with single-segment CSM treated with ACDF between January 2022 and January 2023 were retrospectively analyzed, and they were divided into 3D-ZP group (35 cases, using zero-profile 3D-printed microporous titanium alloy Cage) and CP group (48 cases, using titanium plate in combination with PEEK-Cage). There was no significant difference in gender, age, disease duration, surgical intervertebral space, and preoperative Japanese Orthopaedic Association (JOA) score, visual analogue scale (VAS) score, neck disability index (NDI), vertebral height at the fusion segment, Cobb angle, and other baseline data between the two groups (P>0.05). The operation time, intraoperative blood loss, hospital stay, complications, interbody fusion, and prosthesis subsidence were recorded and compared between the two groups. VAS score, NDI, and JOA score were used to evaluate the improvement of pain and function before operation, at 3 months after operation, and at last follow-up, and the vertebral height at the fusion segment and Cobb angle were measured by imaging. The degree of dysphagia was assessed by the Bazaz dysphagia scale at 1 week and at last follow-up. RESULTS: The operation was successfully completed in all the 83 patients. There was no significant difference in intraoperative blood loss and hospital stay between the two groups (P>0.05), but the operation time in the 3D-ZP group was significantly shorter than that in the CP group (P<0.05). Patients in both groups were followed up 24-35 months, with an average of 25.3 months, and there was no significant difference in the follow-up time between the two groups (P>0.05). The incidence and grade of dysphagia in CP group were significantly higher than those in 3D-ZP group at 1 week after operation and at last follow-up (P<0.05). There was no dysphagia in 3D-ZP group at last follow-up. There was no complication such as implant breakage or displacement in both groups. The intervertebral fusion rates of 3D-ZP group and CP group were 65.71% (23/35) and 60.42% (29/48) respectively at 3 months after operation, and there was no significant difference between the two groups [OR (95%CI)=1.256 (0.507, 3.109), P=0.622]. The JOA score, VAS score, and NDI significantly improved in the 3D-ZP group at 3 months and at last follow-up when compared with preoperative ones (P<0.05), but there was no significant difference between the two groups (P>0.05). There was no significant difference in the improvement rate of JOA between the two groups at last follow-up (P>0.05). At 3 months after operation and at last follow-up, the vertebral height at the fusion segment and Cobb angle significantly improved in both groups, and the two indexes in 3D-ZP group were significantly better than those in CP group (P<0.05). At last follow-up, the incidence of prosthesis subsidence in 3D-ZP group (8.57%) was significantly lower than that in CP group (29.16%) (P<0.05). CONCLUSION The application of zero-profile 3D-printed Cage and titanium plate combined with PEEK-Cage in single-segment ACDF can both reconstruct the stability of cervical spine and achieve good effectiveness. Compared with the latter, the application of the former in ACDF can shorten the operation time, reduce the incidence of prosthesis subsidence, and reduce the incidence of dysphagia.
Humans ; Spinal Fusion/instrumentation* ; Titanium ; Cervical Vertebrae/surgery* ; Diskectomy/instrumentation* ; Bone Plates ; Male ; Printing, Three-Dimensional ; Female ; Retrospective Studies ; Middle Aged ; Treatment Outcome ; Benzophenones ; Adult ; Spondylosis/surgery* ; Aged ; Polymers ; Ketones ; Polyethylene Glycols

Invasive Aspergillosis (IA) is a severe filamentous fungal infection caused by opportunistic pathogenic Aspergillus. Due to its insidious incidence and high mortality rate, accurate diagnosis of IA is in urgent need. Recent advances in molecular diagnostic techniques have enabled novel approaches for Aspergillus detection in clinical fungal laboratory. To this end, this paper summarizes recent progress in molecular detection of Aspergillus nucleic acids and discusses its value in IA diagnosis. The findings provide guidance for both current diagnostic approaches and the development of new in vitro diagnostic technologies for IA.

Obesity is a significant risk factor for cancer and is associated with breast cancer metastasis. Nevertheless, the mechanism by which alterations in systemic metabolism affect tumor microenvironment (TME) and consequently influence tumor metastasis remains inadequately understood. Herein, we found that perturbations in circulating metabolites induced by obesity promote metastasis-like phenotypes in breast cancer. Oleoylcarnitine (OLCarn) concentrations were elevated in the serum of obese mice and humans. Administration of exogenous OLCarn induces metastasis-like characteristics in breast cancer cells. Mechanistically, OLCarn directly interacts with the Arg176 site of adenylate cyclase 10 (ADCY10), leading to the activation of ADCY10 and enhancement of cAMP production. Mutations at Arg176 prevent OLCarn from binding to ADCY10, disrupting the ADCY10-mediated activation of cyclic adenosine monophosphate (cAMP) signaling pathway. This activation promotes transcription factor 4 (TCF4)-dependent kinesin family member C1 (KIFC1) transcription, thereby driving breast cancer metastasis. Conversely, the neutralization of both ADCY10 and KIFC1 through knockdown or pharmacological inhibition abrogates the oncogenic effects mediated by OLCarn. Hence, obesity-induced systemic environmental changes lead to the aberrant accumulation of OLCarn within the TME, making it a potential therapeutic target and biomarker for breast cancer.

Objective To investigate the diagnostic value of multimodality-enhanced CT-based radiomics nomogram for muscle-inva-sive bladder urothelial carcinoma.Methods A retrospective analysis was performed on the preoperative data of 644 patients with pathologically confirmed bladder urothelial carcinoma from three medical centers.Region of interest(ROI)were drawn on preopera-tive contrast-enhanced CT images,and radiomics features were extracted.Patients from medical center 1 were randomly divided into training set and internal validation set in a 7∶3 ratio,while patients from medical centers 2 and 3 were combined as an external val-idation set.The diagnostic performance of the models was evaluated using receiver operating characteristic(ROC)curve.Results In the external validation set,the area under the curve(AUC)for diagnosing muscle-invasive bladder urothelial carcinoma using the multi-phase fusion radiomics model was 0.861[95％ confidence interval(CI)0.811-0.911].The nomogram constructed by combi-ning the multi-phase fusion radiomics model with clinical factors achieved an AUC of 0.901(95％ CI 0.862-0.939).Conclusion The nomogram combining multimodality-enhanced CT-based radiomics with clinical factors can effectively diagnose muscle-invasive bladder urothelial carcinoma.

Invasive Aspergillosis (IA) is a severe filamentous fungal infection caused by opportunistic pathogenic Aspergillus. Due to its insidious incidence and high mortality rate, accurate diagnosis of IA is in urgent need. Recent advances in molecular diagnostic techniques have enabled novel approaches for Aspergillus detection in clinical fungal laboratory. To this end, this paper summarizes recent progress in molecular detection of Aspergillus nucleic acids and discusses its value in IA diagnosis. The findings provide guidance for both current diagnostic approaches and the development of new in vitro diagnostic technologies for IA.

The COVID-19 epidemic has spread to the whole world for three years and has had a serious impact on human life, health and economic activities. China's epidemic prevention and control has gone through the following stages: emergency unconventional stage, emergency normalization stage, and the transitional stage from the emergency normalization to the "Category B infectious disease treated as Category B" normalization, and achieved a major and decisive victory. The designated hospitals for prevention and control of COVID-19 epidemic in Tianjin has successfully completed its tasks in all stages of epidemic prevention and control, and has accumulated valuable experience. This article summarizes the experience of constructing a hospital infection prevention and control system during the "Category B infectious disease treated as Category A" period in designated hospital. The experience is summarized as the "Cluster" hospital infection prevention and control system, namely "three rings" outside, middle and inside, "three districts" of green, orange and red, "three things" before, during and after the event, "two-day pre-purification" and "two-director system", and "one zone" management. In emergency situations, we adopt a simplified version of the cluster hospital infection prevention and control system. In emergency situations, a simplified version of the "Cluster" hospital infection prevention and control system can be adopted. This system has the following characteristics: firstly, the system emphasizes the characteristics of "cluster" and the overall management of key measures to avoid any shortcomings. The second, it emphasizes the transformation of infection control concepts to maximize the safety of medical services through infection control. The third, it emphasizes the optimization of the process. The prevention and control measures should be comprehensive and focused, while also preventing excessive use. The measures emphasize the use of the least resources to achieve the best infection control effect. The fourth, it emphasizes the quality control work of infection control, pays attention to the importance of the process, and advocates the concept of "system slimming, process fattening". Fifthly, it emphasizes that the future development depends on artificial intelligence, in order to improve the quality and efficiency of prevention and control to the greatest extent. Sixth, hospitals need to strengthen continuous training and retraining. We utilize diverse training methods, including artificial intelligence, to ensure that infection control policies and procedures are simple. We have established an evaluation and feedback mechanism to ensure that medical personnel are in an emergency state at all times.

BACKGROUND:With the innovation of examination technique,the number of patients with spinal metastases in different stages is increasing year by year.Percutaneous vertebroplasty is an important treatment for spinal metastases;however,there is no report on the biomechanical effect in different stages and different activities after operation. OBJECTIVE:To simulate thoracic T10 bone stress and displacement of the different locations of the tumor metastasis based on the three-dimensional finite element model. METHODS:According to thoracic three-dimensional CT images of a 30-year-old healthy male,Mimics software was used to construct a three-dimensional geometric model of thoracic vertebrae(T9-T11),including ribs,ligaments and intervertebral discs.Three-dimensional models of T9-T11 vertebral bodies and different parts of the posterior thoracic vertebrae invaded by thoracic metastatic tumors were simulated,including the control group with intact vertebral structure,unilateral metastasis involving the vertebral body area(experimental group 1),unilateral metastasis involving the vertebral body and pedicle area(experimental group 2),unilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 3),and bilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 4).Abaqus software was used to create a three-dimensional finite element model.The von Mises stress distribution and the displacement of the model were analyzed under the loading condition,buckling condition,extension condition,and rotation condition. RESULTS AND CONCLUSION:(1)In the study of the maximum total displacement of loading points in different experimental groups under loading,flexion,extension,and rotation conditions,with the increase of metastatic tumor invasion site and invasion surface,the total displacement of loading points increased,and the overall stiffness decreased,especially the total displacement of loading points in experimental group 4 was the largest.(2)Under flexion condition,the maximum Von Mises stress value increased significantly after vertebral body and pedicle destruction,while the maximum Von Mises stress value was almost unchanged when the thoracocostal joint destruction was added.(3)On the basis of finite element analysis and simulation of bone tumor model,the elements in the bone cement region were set as a single set,and the bone cement region was set as the corresponding material properties to simulate bone cement filling.The results showed that the maximum total displacement under loading,flexion,extension,and rotation conditions was less than that of each experimental group.(4)The maximum stress values of the simulated percutaneous vertebroplasty patients in the loading,flexion,extension and rotation conditions were significantly lower than those of the femoral model.(5)It is concluded that the three-dimensional finite element model based on thoracic T9-T11 conducive to the biomechanics characteristics of thoracic vertebrae tumor metastasis,and on the basis of the thoracic vertebrae tumor metastasis model can accurately simulate load point after percutaneous vertebral body under different conditions of total displacement and the maximum Von Mises stress situation.