Occupational pneumoconiosis remains the most common occupational disease in China, with occupational mineral dust exposure being its primary causative factor. Although national standards for online monitoring and early warning systems of coal mine dust concentrations have been established, national occupational health standards for rapid and online monitoring of dust concentration and particle size distribution in other industries are still limited. Among dust concentration sensor technologies, the light scattering method is the preferred choice for online dust monitoring owing to its wide measurement range and low cost. The beta-ray absorption method is mature but highly sensitive to humidity. The electrostatic induction method offers high sensitivity, simple structure, and low maintenance costs but exhibits high errors in low-concentration dust monitoring. The tapered element oscillating microbalance method is highly sensitive but costly. Multi-sensor data fusion technology can improve monitoring reliability, however, mature domestic products are not yet available. For monitoring dust particle size distribution, sieving and sedimentation methods are cumbersome. The aerodynamic method shows broad prospects in the online monitoring of respirable dust but has obvious measurement errors for larger dust particles. The use of optical measurement method is limited by dust morphology and is not suitable for monitoring coal dust particle size distribution. The electrical mobility method is primarily applicable to submicron dust. Future research should focus on promoting the application of monitoring technology for respirable dust particle size distribution in online monitoring of industrial dust. By integrating Internet of Things, data mining, and artificial intelligence technologies, along with multi-sensor data fusion and numerical simulation, dust concentration prediction models can be established to achieve accurate dust concentration monitoring and early warning of exceedances. The advancements of technologies will provide scientific support for the assessment of industrial dust hazards and the prevention and control of occupational pneumoconiosis.

Objective To obtain the protective performance parameters of barium sulfate mortar against positron nuclide γ-rays, provide reference data for precise shielding calculations, and guide the design, evaluation, and construction of radiation shielding. Methods The FLUKA program was used to build a model for simulating the dose equivalent rate variation around points of interest under the irradiation of the most commonly used positron nuclide ¹⁸F with changes in the thicknesses of lead and barium sulfate mortar. The transmission curves of lead and barium sulfate mortar were fitted, and the half-value layer (HVL) and lead equivalence of barium sulfate mortar were calculated based on the fitted curves. Results The ambient dose equivalent rate coefficient of positron nuclide ¹⁸F was 1.339 4×10⁻¹ μSv·m²/MBq·h and the HVL for lead was 4.037 mm, with deviations of 0.043% and 1.53% compared to the values provided in the AAPM Report No. 108, respectively. The HVLs for γ-rays produced by ¹⁸F, using barium sulfate mortar with apparent densities of 4.20, 4.00, and 3.90 g/cm³ mixed with 35.2-grade cement in a 4∶1 mass ratio, were 2.914, 2.969, and 3.079 cm, respectively. The lead equivalences were 0.1385, 0.1360, and 0.1311 mmPb/mm, respectively. Conclusion The three types of barium sulfate mortar can provide good protection against γ-rays in positron imaging locations. As the apparent density of barium sulfate increases, its protective effect improves slightly but remains significantly better than common construction materials like concrete and solid bricks.

Objective To analyze the distribution characteristics of the single nucleotide polymorphism (SNP) site rs76206423 in the promoter region of the interleukin-2 receptor (IL-2R) β gene among Han males in a high radiation background area (HBRA) in Yangjiang City. Methods A total of 48 male participants from Tangkou Town, Yangxi County, Yangjiang City (HBRA group), and 51 male participants from Hengpo Town, Enping City (control group) were selected as the research subjects using the random number table method. Peripheral venous blood samples of participants from both groups were collected, and genomic DNA was extracted. The genotyping and allele frequency distribution of the rs76206423 (A/G) site in the IL-2R β promoter region was detected among the participants in both groups using the SNP detection method. The difference of allele frequencies between population in HBRA group and five area of East Asia, South Asia, Africa, Europe, and the Americas published in the Human Genome Project database from National Center for Biotechnology Information were analyzed. Results The allele frequencies of rs76206423 of population in both groups conformed to Hardy-Weinberg equilibrium (P>0.05). In the HBRA group, the AA genotype was predominant (64.6%), while the AG genotype was the most common in the control group (51.0%), with a significant difference (P<0.05). Population in both groups showed a predominance of the variant allele A (78.1% and 72.5%, respectively), with no significant difference (P>0.05). The frequency of the G allele of rs76206423 in the population in HBRA group was higher than those in South Asian, African, European, and American populations (all P<0.01), but showed no significant difference compared with East Asian populations (P>0.05). Conclusion In the Han male population from the HBRA in Yangjiang City, the rs76206423 site in the IL-2R β gene promoter region is predominantly composed of the wild-type A allele and AA genotype, indicating genetic stability and a relatively high degree of variation at this locus.

Objective:To investigate the use of earplugs among noise-exposed workers (Homo sapiens) in Bao'an District, Shenzhen, measure the personal attenuation rating (PAR) of earplugs when wearing earplugs, (Homo sapiens), analyze factors influencing the protective effect of earplugs, and evaluate the role of targeted wearing interventions in improving protective efficacy.Methods:From December 2022 to January 2023, 220 workers in noise-exposed positions from 3 enterprises in Bao'an District, Shenzhen were selected as subjects using the convenience sampling method. The Personal Attenuation Rating (PAR) values of workers wearing earplugs were measured using a fit testing system. Combined with the results of a questionnaire survey, the individual differences in workers' baseline PAR were described. A multivariate logistic regression model was used to analyze the influencing factors for earplugs to achieve the protective effect. One-on-one wearing interventions were implemented for workers who failed to achieve the protective effect, and repeated PAR tests were conducted. The changes in PAR of 120 workers before and after the intervention were compared.Results:The median baseline PAR for 220 workers was 7 (0, 14) dB, and the intervention rate was 54.55% (120/220). There were differences in the baseline PAR of workers with different length of service, earplugs wearing time and experience, daily noise exposure time and intensity, training and the comfort of earplug use ( P<0.05). The results of multivariate regression analysis showed that workers The comfort with earplugs wearing ( OR=2.81, 95% CI: 1.49~5.33, P<0.01) and training ( OR=6.60, 95% CI: 1.70~25.63, P<0.05) were the influencing factors of achieving the protective requirement. The median PAR was increased to 13 (11, 16) dB after intervention. Conclusion:The baseline protective effect of earplugs worn by workers is significantly influenced by comfort and enterprise training. One-on-one interventions can effectively improve the protective efficacy of those who fail to meet the requirements.

Objective:To observe the current status of the use of personal protective equipment (PPE) by the dust working population, and to analyze the factors affecting its use, so as to provide a reference basis for proposing scientific intervention methods.Methods:From October to December 2023, random sampling method was used to conduct a self-designed Questionnaire on the Use of Personal Protective Equipment by the Dust Working Population. A total of 1216 dust workers were randomly selected from each city in Guangdong Province, and their mask wearing status was evaluated. The Wilcoxon rank sum test was used for comparison between measurement data sets, and the Chi-square test or Fisher exact probability method was used for counting data. A binary logistic regression model was used to analyze the factors affecting the use of PPE in dust workers.Results:The correct rate of wearing PPE in dust working group was 66.12% (804/1216). In univariate analysis, there were statistical significances in different knowledge score, wearing PPE to reduce exposure to dust particles, wearing occupational health protective equipment such as masks was uncomfortable, wearing occupational health protective equipment such as masks reduced work efficiency, attending pre-employment occupational health examination, attending occupational health examination on a regular basis, receiving occupational health training during work in the enterprise, being urged or reminded by workmates, supervisors, or family members to use PPE, the correct use of PPE when workers or shift leaders were exposed to dust particles, second-hand smoke inhalation, smoking, and alcohol consumption ( P<0.05). Multiple logistic regression results showed that gender ( OR=2.00, 95% CI: 1.48-2.72), knowledge score ( OR=1.18, 95% CI: 1.11-1.26), neutral attitude towards the discomfort of wearing occupational health protective equipment such as masks during work ( OR=1.64, 95% CI: 1.18-2.27), and participation in pre-job occupational health examination ( OR=0.23, 95% CI: 0.10-0.54) were the main influencing factors on the use of PPE to be worn correctly ( P<0.05) . Conclusion:The rate of correct wearing of PPE for dust working population still needs to be improved. Factors such as gender, knowledge score, neutral attitude towards the discomfort of wearing masks during work, and participation in pre-job occupational health examination may be the influencing factors on the use of PPE for dust working population.

Objective:To analyze the correct use of personal protective equipment (PPE) among noise-exposed workers and its influencing factors, providing reference information for noise intervention efforts.Methods:In September 2023, a stratified sampling method was employed. Based on the 2022 gross domestic product (GDP) rankings of cities in Guangdong Province, 21 prefecture-level cities were divided into economically developed and less developed groups. Two cities were randomly selected from each group, and 16 to 17 enterprises were randomly chosen from each city as study sites. Twenty workers were included from each enterprise as study subjects. A total of 1200 questionnaires were distributed and collected, and 1099 were valid, with an effective recovery rate of 91.6%. The correctness of hearing protector usage was evaluated according to the GB/T 23466-2009 "Guidelines for the Selection of Hearing Protectors", and the personal attenuation rating values of the workers' hearing protectors were measured. A self-designed Questionnaire on the Use of Hearing Protectors by Noise-Exposed Workers was used to investigate PPE-related usage. Multivariate logistic regression analysis was conducted to identify factors influencing the correct use of PPE.Results:A total of 429 (39.0%) noise-exposed workers were able to use PPE correctly during work. Multivariate logistic regression analysis showed that age, working hours, gender, occupational noise protection knowledge score, whether PPE was checked after use, and the frequency of peer supervision on PPE usage were significant factors influencing the effective use of PPE ( P<0.05) . Conclusion:The correct use of PPE by noise-exposed workers still needs to be improved. The level of occupational health education in enterprises should be enhanced to promote the correct use of PPE by noise-exposed workers.

Objective:To understand the occupational injury situation of front-line workers in metallurgical and shipbuilding and repairing industry, and explore the risk factors of occupational injury.Methods:From September 2023 to March 2024, using cluster sampling method, front-line workers from 2 metallurgical enterprises in Shaoguan and Jinan City and 2 shipbuilding and repairing enterprises in Jiangmen and Shenzhen City were selected as the investigation objects. 6248 questionnaires were distributed and collected, and 6178 were effective questionnaires, with a effective recovery rate of 98.88%. The basic information, living habits, working system, protection and occupational injury of workers were investigated, and the data of occupational injury in factories was collected. The types, jobs and main causes of occupational injuries in different industries were analyzed, and the influencing factors of occupational injuries were analyzed by univariate and multi-factor logistic regression.Results:The incidence of occupational injury was 3.13% (128/4086) in metallurgical industry and 4.02% (84/2092) in shipbuilding and repairing industry. The top three occupational injuries in the metallurgical industry were furnace worker (17.19%, 22/128), steel rolling worker (14.84%, 19/128), maintenance worker (10.16%, 13/128), and the top three injury types were mechanical injury (24.22%, 31/128), height fall (20.31%, 26/128) and object strikes (17.97%, 23/128). The top three occupational injuries in shipbuilding and repairing industry were welder (20.24%, 17/84), riveter (9.52%, 8/84) and crane (8.33%, 7/84). The top three injury types were hit by objects (34.52%, 29/84), hit by falling objects (22.62%, 19/84), and lifting injury (20.24%, 17/84). The injuries of workers in metallurgical industry and shipbuilding and repairing industry were mainly fractures, accounting for 32.03% (41/128) and 60.71% (51/84), respectively. The incidence of occupational injury was higher in males, with sleep disorder, high temperature exposure and chemical toxicity exposure ( P<0.05). There were significant differences in age, smoking degree, working age and emotional state between workers with occupational injury and those without occupational injury ( P<0.05). Multivariate analysis showed that male, age above 50 years old, moderate smoking, working years of 5-9 years, mild anxiety, poor health status and high temperature exposure were risk factors for occupational injury ( OR=25.57, 3.72, 14.27, 2.09, 1.50, 4.36, 0.66, P<0.05) . Conclusion:The incidence of occupational injury is higher in shipbuilding and repairing industry, and fracture is the main type of occupational injury. The occurrence of occupational injury is affected by gender, age, smoking, working age, emotional state, health status and high temperature exposure.

Sepsis is a life-threatening organ dysfunction caused by a dysregulated host response to infection，with immune dysregulation serving as the central mechanism. Interleukin-10，a pivotal cytokine in the immunopathological cascade of sepsis，plays dual roles in balancing inflammatory and anti-inflammatory responses. This article provided a concise review of the latest research advances regarding the role of interleukin-10 in the pathogenesis，early diagnosis，prognostic evaluation，and therapeutic strategies of sepsis，aiming to enhance clinical understanding of its diagnostic，therapeutic，and prognostic implications in sepsis management.

Objective:To investigate the use of earplugs among noise-exposed workers (Homo sapiens) in Bao'an District, Shenzhen, measure the personal attenuation rating (PAR) of earplugs when wearing earplugs, (Homo sapiens), analyze factors influencing the protective effect of earplugs, and evaluate the role of targeted wearing interventions in improving protective efficacy.Methods:From December 2022 to January 2023, 220 workers in noise-exposed positions from 3 enterprises in Bao'an District, Shenzhen were selected as subjects using the convenience sampling method. The Personal Attenuation Rating (PAR) values of workers wearing earplugs were measured using a fit testing system. Combined with the results of a questionnaire survey, the individual differences in workers' baseline PAR were described. A multivariate logistic regression model was used to analyze the influencing factors for earplugs to achieve the protective effect. One-on-one wearing interventions were implemented for workers who failed to achieve the protective effect, and repeated PAR tests were conducted. The changes in PAR of 120 workers before and after the intervention were compared.Results:The median baseline PAR for 220 workers was 7 (0, 14) dB, and the intervention rate was 54.55% (120/220). There were differences in the baseline PAR of workers with different length of service, earplugs wearing time and experience, daily noise exposure time and intensity, training and the comfort of earplug use ( P<0.05). The results of multivariate regression analysis showed that workers The comfort with earplugs wearing ( OR=2.81, 95% CI: 1.49~5.33, P<0.01) and training ( OR=6.60, 95% CI: 1.70~25.63, P<0.05) were the influencing factors of achieving the protective requirement. The median PAR was increased to 13 (11, 16) dB after intervention. Conclusion:The baseline protective effect of earplugs worn by workers is significantly influenced by comfort and enterprise training. One-on-one interventions can effectively improve the protective efficacy of those who fail to meet the requirements.

Sepsis is a life-threatening organ dysfunction caused by a dysregulated host response to infection，with immune dysregulation serving as the central mechanism. Interleukin-10，a pivotal cytokine in the immunopathological cascade of sepsis，plays dual roles in balancing inflammatory and anti-inflammatory responses. This article provided a concise review of the latest research advances regarding the role of interleukin-10 in the pathogenesis，early diagnosis，prognostic evaluation，and therapeutic strategies of sepsis，aiming to enhance clinical understanding of its diagnostic，therapeutic，and prognostic implications in sepsis management.