ObjectiveTo explore the clinical efficacy and mechanism of Bupi Qingfei prescription （BPQF） in treating stable bronchiectasis in the patients with syndromes of lung-spleen Qi deficiency and phlegm-heat accumulation in the lungs. MethodsA randomized， double-blind， placebo-controlled trial was conducted. Patients were randomized into BPQF and placebo control （PC） groups. On the basis of conventional Western medicine treatment， the BPQF granules and placebo were respectively administered at 10 g each time， twice a day， for a course of 24 weeks. The TCM symptom scores， Quality of Life Questionnaire for Bronchiectasis （QOL-B） scores， lung function indicators， T lymphocyte subsets， level of inflammatory factors in the sputum， level of neutrophil elastase （NE） in the sputum， and occurrence of adverse reactions were observed before and after treatment in the two groups. ResultsA total of 64 patients completed the study， encompassing 32 in the BPQF group and 32 in the PC group. After treatment， the BPQF group showed decreased TCM symptom scores （P<0.01）， increased QOL-B scores （P<0.01）， and declined levels of tumor necrosis factor （TNF）-α and NE （P<0.05， P<0.01）. The PC group showed decreased TCM symptom （except spleen deficiency） scores （P<0.01）， increased the QOL-B health cognition and respiratory symptom domain scores （P<0.05， P<0.01）， and a declined TNF-α level （P<0.01）. Moreover， the BPQF group had lower TCM symptom （except chest tightness） scores （P<0.05， P<0.01）， higher QOL-B （except treatment burden） scores （P<0.05， P<0.01）， and lower levels of interleukin-6 and TNF-α （P<0.05） than the PC group. Neither group showed serious adverse reactions during the treatment process. ConclusionBPQF can ameliorate the clinical symptoms of stable bronchiectasis patients who have lung-spleen Qi deficiency or phlegm-heat accumulation in the lungs by regulating the immune balance and inhibiting airway inflammatory responses.

Objective:To investigate the trajectory of frailty in elderly patients on maintenance hemodialysis(MHD)following SARS-CoV-2 infection and its associated risk factors.Methods:This prospective cohort study focused on elderly patients who underwent baseline frailty assessment(T0)during hemodialysis treatment at Beijing Friendship Hospital for over 3 months between December 1st, 2022, and December 31th, 2022, and were diagnosed with SARS-CoV-2 infection.The Fried Frailty Phenotype was evaluated at 1 month(T1), 3 months(T2), and 6 months(T3)post-infection.Frailty trajectory after infection was analyzed using repeated measurement ANOVA.Patients were divided into stable/improvement or exacerbation groups based on their frailty status at T0 and T3, with logistic regression analysis employed to identify risk factors for different frailty trajectories.Results:A total of 130 elderly maintenance hemodialysis patients, with a median age of 66 years(range: 63-71 years)and 62 males(47.7%), were included in the study.Six months after the infection, a majority of surviving patients saw their frailty scores return to baseline levels.Specifically, 72 patients(55.4%)either maintained or improved to robust or pre-frail states, while 9 patients(6.9%)progressed to a pre-frail state, 18 patients(13.8%)progressed to a frail state, and 31 patients(23.8%)remained in a frail state.Results from multivariate logistic regression analysis indicated that low grip strength( OR: 6.30, 95% CI: 1.48-26.73)and all-cause hospitalization( OR: 5.01, 95% CI: 1.19-21.03)were identified as risk factors for non-frail patients transitioning to frailty( P<0.05). Conclusions:The majority of elderly maintenance hemodialysis patients who survived SARS-CoV-2 infection returned to their baseline level of frailty or showed improvement within 6 months.Non-frail patients with low grip strength or those who were hospitalized were more likely to deteriorate towards frailty.

Objective This study aimed to investigate the antimicrobial resistance profiles of bacterial strains isolated from pediatric intensive care units(PICU)in China for better antimicrobial therapy.Methods Clinical isolates were collected from 17 institutions,including tertiary care children's hospitals and pediatric department of tertiary general hospitals in China from January 1,2020 to December 31,2022.Antimicrobial susceptibility testing was carried out according to a unified protocol using Kirby-Bauer method or automated systems.Results were interpreted according to the breakpoints released by the Clinical and Laboratory Standards Institute(CLSI)in 2020.Results A total of 10 688 isolates were collected,including gram-positive organisms(39.2％)and gram-negative organisms(60.8％).The top three organisms were S.aureus(13.6％,1 453/10 688),A.baumannii(10.0％,1 067/10 688),and coagulase-negative Staphylococcus(9.9％,1 058/10 688).Multi-drug resistant organisms(MDROs)were very common in children.The prevalence of methicillin-resistant Staphylococcus aureus(MRSA),carbapenem-resistant Enterobacterales(CRE),carbapenem-resistant E.coli,carbapenem-resistant K.pneumoniae(CRKP),carbapenem-resistant A.baumannii(CRAB),and carbapenem-resistant P.aeruginosa(CRPA)was 41.1％,19.4％,8.8％,30.9％,67.4％,and 28.8％,respectively.Overall,more than 50％of Enterobacteriales isolates were resistant to cephalosporins,while nearly 25％of Enterobacteriales isolates were resistant to carbapenems.MDROs were highly resistant to commonly used antibiotics.More than 80％of CRE and CRAB strains were resistant to all beta-lactam antibiotics.CRE and CRAB showed low resistance rates to tigecycline and polymyxin.CRPA showed lower resistance rates to piperacillin,beta-lactamase inhibitor combinations than the resistance rates to third and fourth generation cephalosporins.All of the Staphylococcus and Enterococcus isolates were susceptible to vancomycin and tigecycline.None of PRSP strains isolated from meningitis and nonmeningitis samples were resistant to rifampicin,vancomycin,or linezolid.The prevalence of β-lactamase-negative ampicillin-resistant(BLNAR)strains was 43.3％in Haemophilus influenzae.Conclusions MDROs were prevalent in PICU.It is necessary to establish an effective multidisciplinary team(MDT)to control the antimicrobial resistance.

Objective This study aimed to investigate the antimicrobial resistance profiles of bacterial strains isolated from pediatric intensive care units(PICU)in China for better antimicrobial therapy.Methods Clinical isolates were collected from 17 institutions,including tertiary care children's hospitals and pediatric department of tertiary general hospitals in China from January 1,2020 to December 31,2022.Antimicrobial susceptibility testing was carried out according to a unified protocol using Kirby-Bauer method or automated systems.Results were interpreted according to the breakpoints released by the Clinical and Laboratory Standards Institute(CLSI)in 2020.Results A total of 10 688 isolates were collected,including gram-positive organisms(39.2％)and gram-negative organisms(60.8％).The top three organisms were S.aureus(13.6％,1 453/10 688),A.baumannii(10.0％,1 067/10 688),and coagulase-negative Staphylococcus(9.9％,1 058/10 688).Multi-drug resistant organisms(MDROs)were very common in children.The prevalence of methicillin-resistant Staphylococcus aureus(MRSA),carbapenem-resistant Enterobacterales(CRE),carbapenem-resistant E.coli,carbapenem-resistant K.pneumoniae(CRKP),carbapenem-resistant A.baumannii(CRAB),and carbapenem-resistant P.aeruginosa(CRPA)was 41.1％,19.4％,8.8％,30.9％,67.4％,and 28.8％,respectively.Overall,more than 50％of Enterobacteriales isolates were resistant to cephalosporins,while nearly 25％of Enterobacteriales isolates were resistant to carbapenems.MDROs were highly resistant to commonly used antibiotics.More than 80％of CRE and CRAB strains were resistant to all beta-lactam antibiotics.CRE and CRAB showed low resistance rates to tigecycline and polymyxin.CRPA showed lower resistance rates to piperacillin,beta-lactamase inhibitor combinations than the resistance rates to third and fourth generation cephalosporins.All of the Staphylococcus and Enterococcus isolates were susceptible to vancomycin and tigecycline.None of PRSP strains isolated from meningitis and nonmeningitis samples were resistant to rifampicin,vancomycin,or linezolid.The prevalence of β-lactamase-negative ampicillin-resistant(BLNAR)strains was 43.3％in Haemophilus influenzae.Conclusions MDROs were prevalent in PICU.It is necessary to establish an effective multidisciplinary team(MDT)to control the antimicrobial resistance.

Objective To study the influences of the structural parameters of the pump head flow channel on the energy dissipation of injection pumps and optimize the pump head flow channel structural parameters.Methods Firstly,three structural parameters of the injection pump head flow channel,namely the input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter,were selected as the experimental factors for orthogonal experimental design,and the total entropy production values of the injection pump head flow channels with different structures were obtained through entropy production analysis;secondly,the effects of the three structural parameters on the total entropy production values were explored with the range method;finally,the Kriging interpolation proxy model analysis and computational fluid dynamics(CFD)numerical analysis of the injection pump head flow channel were carried out to determine the effects of the combinations of the three structural parameters by pairs on the total entropy production values,and the structural parameters of the injection pump head flow channel were optimized with the objective of energy dissipation.Results The minimum total entropy production value was 2 783 970 mW/K,which was 29.8%lower than that in case of the initial structure(3 966 072 mW/K),when the input chamber diameter was 4.8 mm,the connecting chamber diameter was 0.32 mm and the plunger rod chamber diameter was 1.0 mm;the three structural parameters had significant differences in the effects on the total entropy production value,ordered as the plunger rod chamber diameter,the input chamber diameter and the connecting chamber diameter;considering the energy dissipation,the total entropy production value was minimized in case of the minimal input chamber diameter,the maximal connecting chamber diameter and the medium-sized plunger rod chamber diameter.Conclusion The input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter have differences in the sensitivity to the effects on the energy dissipation of the injection pump head flow channel,and the structural parameters of the head flow path can be optimized accordingly with the goal of minimizing energy dissipation.[Chinese Medical Equipment Journal,2025,46(9):28-32]

Objective To study the influences of the structural parameters of the pump head flow channel on the energy dissipation of injection pumps and optimize the pump head flow channel structural parameters.Methods Firstly,three structural parameters of the injection pump head flow channel,namely the input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter,were selected as the experimental factors for orthogonal experimental design,and the total entropy production values of the injection pump head flow channels with different structures were obtained through entropy production analysis;secondly,the effects of the three structural parameters on the total entropy production values were explored with the range method;finally,the Kriging interpolation proxy model analysis and computational fluid dynamics(CFD)numerical analysis of the injection pump head flow channel were carried out to determine the effects of the combinations of the three structural parameters by pairs on the total entropy production values,and the structural parameters of the injection pump head flow channel were optimized with the objective of energy dissipation.Results The minimum total entropy production value was 2 783 970 mW/K,which was 29.8%lower than that in case of the initial structure(3 966 072 mW/K),when the input chamber diameter was 4.8 mm,the connecting chamber diameter was 0.32 mm and the plunger rod chamber diameter was 1.0 mm;the three structural parameters had significant differences in the effects on the total entropy production value,ordered as the plunger rod chamber diameter,the input chamber diameter and the connecting chamber diameter;considering the energy dissipation,the total entropy production value was minimized in case of the minimal input chamber diameter,the maximal connecting chamber diameter and the medium-sized plunger rod chamber diameter.Conclusion The input chamber diameter,the connecting chamber diameter and the plunger rod chamber diameter have differences in the sensitivity to the effects on the energy dissipation of the injection pump head flow channel,and the structural parameters of the head flow path can be optimized accordingly with the goal of minimizing energy dissipation.[Chinese Medical Equipment Journal,2025,46(9):28-32]

Articular cartilage is a crucial tissue structure in humans.With ongoing exploration of joint tissue structure and the emergence of innovative biotechnological organoids,various sources of stem cells can be selected for induction to differentiate into articular cartilaginous organoids based on the articular cartilage tissue structure,which can be applied to the treatment of cartilage defects,drug testing,and precision medicine and biological development.This article presents a review of the research progress concerning articular cartilaginous organoids,in order to provide a reference for clinical practice.

Articular cartilage is a crucial tissue structure in humans.With ongoing exploration of joint tissue structure and the emergence of innovative biotechnological organoids,various sources of stem cells can be selected for induction to differentiate into articular cartilaginous organoids based on the articular cartilage tissue structure,which can be applied to the treatment of cartilage defects,drug testing,and precision medicine and biological development.This article presents a review of the research progress concerning articular cartilaginous organoids,in order to provide a reference for clinical practice.

Objective To design a pairs of detection gloves for orthopedic manipulation to solve the problems of orthopedic manipulation in accurate,visual and quantitative description and reproduction in teaching.Methods The orthopedic manipulation detection gloves were mainly composed of a detection body worn on the hands,a main control module and a data visualization system.The detection body was made of multi-layer flexible materials such as rubber,cotton and non-woven fabrics,which integrated inertial sensors,pressure sensors and a data acquisition device;the main control module consisted of a filter circuit,an A/D converter(MCP3008)and a main controller(ARM-STM32 microcontroller);the data visualization system was designed based on the Unity 3D platform.Results The orthopedic manipulation detection gloves effectively detected the rotation angle of the knuckle during the orthopedic process with a high accuracy rate.Conclusion The orthopedic manipulation detection gloves can quantitatively display the abstract orthopedic manipulation,and can provide support for intelligent orthopedic teaching and orthopedic manipulation optimization.[Chinese Medical Equipment Journal,2025,46(7):27-33]

Objective To investigate the efficacy of an interpretable integrated learning model combining clinical indicators,CT image features and radiomics features for the differential diagnosis of lung squamous cell carcinoma and adenocarcinoma,so as to provide references for clincal treatment decisions.Methods A retrospective analysis was conducted on clinical and imaging data from 220 patients(231 lesions)with primary non-small cell lung cancer at Jiangjin Central Hospital of Chongqing(Center 1)and 83 patients(84 lesions)at Chongqing General Hospital(Center 2).In Center 1,the squamous cell carcinoma group consisted of 60 patients(60 lesions),while the adenocarcinoma group included 160 patients(171 lesions).In Center 2,the squamous cell carcinoma group comprised 18 patients(18 lesions),and the adenocarcinoma group involved 65 patients(66 lesions).The patients were categorized into squamous cell carcinoma and adenocarcinoma groups based on pathological findings.Center 1 was randomly partitioned into a training set and a validation set at a 7∶3 ratio,while Center 2 served as the independent test set.Firstly,a deep learning model,VB-Net,was used to automatically segment the tumor region on the lung window image;secondly,the SMOTE(synthetic minority oversampling technique)method was used to balance the categories in the training set and standardize the extracted features with Z-scores;thirdly,the least absolute shrinkage and selection operator(LASSO)were used to select the optimal radiomics features and calculate the radiomics score(Radscore),and univariate and multivariate logistic regression was used to screen clinical indicators and independent clinical factors for differentiating lung squamous cell carcinoma and adenocarcinoma in CT image features;finally,three ensemble learning algorithms(AdaBoost,Bagging decision tree and XGBoost)were used to combine independent clinical factors and Radscore to construct the model.The receiver operating characteristic(ROC)curve was used to evaluate the diagnostic performance of the models.SHAP technique was used to analyze the feature contribution and model decision-making process.Results Among the evaluated ensemble models,AdaBoost and Bagging decision trees demonstrated overfitting tendencies.In contrast,the XGBoost model showed the best performance,achieving AUC values of 0.939,0.887 and 0.853 in the training,validation and independent test sets,respectively.SHAP indicated that Radscore was the most important feature affecting the performance of the model.The decision diagram enabled the visualization of the diagnostic process of the model.Conclusion The interpretable integrated learning model based on clinical indicators,CT image and radiomics features is expected to non-invasively diagnose lung squamous cell carcinoma and adenocarcinoma before treatment and assist clinicians make treatment decisions as early as possible.[Chinese Medical Equipment Journal,2025,46(7):12-20]