The conversion of abundant and low-cost biomass waste into highly efficient two-electron oxygen reduction(ORR)electrocatalyst is an important link in the degradation of pollutants in industrial wastewater through the electro-Fenton process.In this work,porous biocarbon materials doped with manganese and nitrogen(MnNBC)were prepared from corn stalk.The H2O2 selectivity of MnNBC in acidic media was up to 81% @0.6 Vvs RHE,also MnNBC exhibited a long-term stability in a 10-h uninterrupted lifetime test.The ORR activity of MnNBC could be attributed to the synergistic effect of the hierarchical porous structure,improved defect level and heteroatom doping.Moreover,MnNBC as a cathode material for the electro-Fenton system could completely degrade four kinds of common organic dye pollutants,e.g.,Rhodamine B,methyl orange,methylene blue and crystal violet(25 mg/L),respectively,within 40?60 min.The present study provided valuable insights into the transformation of corn stalk waste into efficient cathode materials for the electro-Fenton process.

An effective method for simultaneously detecting four semivolatile earthy-musty odors in freshwater fish by gas chromatography-mass spectrometry(GC-MS)was developed.The concurrent extraction of geosmin(GSM),2-methylisoborneol(MIB),2-isopropyl-3-methoxypyrazine(IPMP),and 2-isobutyl-3-methoxypyrazine(IBMP)in fish tissue was conducted with n-hexane.The optimized QuEChERS material was implemented,and it was found that C18,primary secondary amine(PSA)and MgSO4 could adsorb the target analytes in n-hexane.So only the graphitized carbon black(GCB)could be used to purify the extraction.The adsorption rates of different materials for the four kinds of odors materials were explored in n-hexane and ethyl acetate.The experimental results revealed that the adsorption rates of silica for the four targets were 99.5%-100%in n-hexane and 0.7%-5.0%in ethyl acetate respectively.Then the silica solid phase extraction(SPE)method was utilized to eluent the compounds using 1.0 mL n-hexane/ethyl acetate in different proportions.The results of the comparative analysis demonstrated that n-hexane/ethyl acetate(4∶1,V/V)was the optimized eluent.Based on the obtained results,n-hexane extraction and GCB purification combined with silica SPE were used to isolate GSM,MIB,IPMP and IBMP from fish and the method was validated.It was found that the method showed good linearity in the range of 0.5-200 ng/mL,and with detection limits of 0.6 μg/kg for GSM and MIB,0.2 μg/kg for IPMP and IBMP.The limits of quantitation(LOQ)were 1.0 μg/kg for GSM and MIB,0.6 μg/kg for IPMP and IBMP.Good recoveries(77.5%-112.0%)and relative standard deviations(1.56%-9.42%)were also obtained.The use of silica SPE greatly mitigated the issue that the off-flavor compounds were easily lost in the gas blowing concentration process.There was no cross contamination in this method because the sample pretreatments were conducted separately,which was different with the most commonly used HS-SPME method for detecting semi-volatile substances.The sensitivity of this method was high enough to produce good quantitative results below the odor thresholds of the examined off-flavor compounds.

Introducing fingerprint level 3 features(especially sweat pores)in fingerprint recognition can significantly improve the value of fingerprints.However,conventional fingerprint visualization methods suffer from issues such as poor stability and reproducibility,insufficient resolution,and feature masking in detecting level 3 features.Electrospun membrane has unique advantages in latent fingerprint(LFP)detection due to its excellent adsorption performance and high specific surface area,and thus its application potential in LFP visualization urgently need to be explored.A novel pore visualization method based on core-shell structured PAN-Flu/PVP composite nanofibrous membrane was proposed in this work.Specifically,the PAN-Flu/PVP composite nanofibrous membrane was prepared via coaxial electrospinning technology,with polyacrylonitrile(PAN)loaded with fluorescein(Flu)as the core and polyvinylpyrrolidone(PVP)as the shell.The experimental results showed that the prepared PAN Flu/PVP composite nanofibrous membrane had a porous structure and excellent adsorption performance.Based on the water solubility of the outer shell PVP and the water induced fluorescence enhancement effect of the core Flu,high-resolution visualization of sweat pores could be achieved within 2 s.The optimization experiment showed that the best quality of sweat latent fingerprints was obtained when the Flu content was 4 mg/mL,the spinning time was 1 h,and the sweating time was 2 min.Through repeated fingerprinting and live fingerprint comparison experiment,the strong stability and high reproducibility of the as-produced membrane in displaying fingerprint sweat pores were finally verified.In summary,the development method could quickly,stably and accurately extract the spatial distribution and activity level of fingerprint sweat pores,which was of great significance for improving the utilization and value of fingerprints.

The major components of Olaflur raw material were characterized using ultra performance liquid chromatography-quadrupole time-of-flight-mass spectrometry(UPLC-Q-TOF/MS).The results revealed that cetyl amine fluoride(C16-AmF),octadecene amine fluoride(C18:1-AmF),and octadecyl amine fluoride(Olaflur)were the main components.The contents of C16-AmF,C18:1-AmF,and Olaflur in oral care products were determined via ultra performance liquid chromatography-charged aerosol detector coupled with solid-phase extraction(SPE-UPLC-CAD).The oral care sample was dispersed evenly with a 50%ethanol aqueous solution,and then vortexed with ethanol.The supernatant was collected by centrifugation,concentrated to near dryness,and redissolved with ultrapure water.The re-dissolved sample was loaded onto a Poly-Sery HLB Pro SPE column for purification and elution.The acetonitrile eluate was collected and concentrated to 1.0 mL.Finally,a prepared test solution was separated on a Thermo Acclaim Surfactant Plus chromatographic column(2.1 mm×150 mm,3 μm).Acetonitrile and 100 mmol/L acetic acid-ammonium acetate aqueous solution(pH=4.8)were used as the mobile phases for gradient elution.The flow rate was 0.3 mL/min and cloumn temperature was maintained at 40℃.The sample was detected using a charged aerosol detector,and quantified using an external standard method.The experimental results indicated that the three organic fluorinated amines showed good linear relationship in their respective concentration ranges.The correlation coefficients(r)were greater than 0.99.The limit of detection(LOD)and the limit of quantification(LOQ)of C16-AmF were 2.0 and 8.0 μg/mL,respectively.The LOD and LOQ of C18:1-AmF were 2.0 and 8.0 μg/mL,respectively.The LOD and LOQ of Olaflur were 3.0 μg/mL and 10.0 μg/mL,respectively.The spiked recoveries of the three organic fluorinated amines were 84.3%-104.2%,with relative standard deviations(RSDs)of 4.93%-5.82%.The 28 batches of commercial oral care samples were detected by this method and the results indicated that three organic fluorinated amines were detected in 18 samples and the total content were 22.2-11477.8 μg/g.This method had high sensitivity and good reproducibility.It was suitable for verifying the authenticity of the claims of oral care products promoted with Olaflur as the main efficacy ingredient and selling point,and provided a valuable reference for establishing and improving the standard analytical method for Olaflur.

In recent years,micro photoionization detectors(μPID),with their rapid response speed and excellent sensitivity,have attracted widespread attention in both scientific research and industry.This study developed a portable gas chromatograph based on μPID technology(GC-μPID),and examined its key performance characteristics such as reproducibility,sensitivity,and online analytical capability.The results showed that the method's relative standard deviation(RSD)was controlled within 2.7%,demonstrating good reproducibility;for the standard curves of 27 kinds of volatile organic compounds(VOCs),the linearity was excellent(R2≥0.99),with detection limits of≤10 μg/m3 and benzene series compounds reaching detection limits as low as 0.5 μg/m3.In field applications at an industrial park,this method successfully identified and quantified 17 kinds of VOCs,accurately capturing their diurnal concentration variations.The results above validated that the method developed here had the capability of onsite real-time monitoring and provided an effective tool for in situ monitoring atmospheric pollutants.

OBJECTIVE: To investigate the effectiveness of TiRobot-assisted minimally invasive treatment for fragility fractures of the pelvis (FFP) in elderly patients. METHODS: A retrospective analysis was conducted on the clinical data of 176 patients with FFP who were admitted between July 2018 and July 2024 and met the selection criteria. Among them, 95 patients underwent TiRobot-assisted closed reduction and minimally invasive cannulated screw fixation (robot group), while 81 patients underwent traditional open reduction and plate screw fixation (control group). There was no significant difference in baseline data such as gender, age, fracture classification, disease duration, and preoperative visual analogue scale (VAS) pain scores between the two groups ( P>0.05). The following parameters were recorded and compared between the two groups, including operation time, intraoperative blood loss, intraoperative transfusion rate, volume of intraoperative blood transfusion, maximum incision length, hospital stay, maximum residual displacement, reduction quality, fracture healing time, incidence of complications, VAS scores, Majeed pelvic function scores, and functional grading. RESULTS: All surgeries in both groups successfully completed. The robot group exhibited significantly shorter operation time, reduced intraoperative blood loss, lower intraoperative transfusion rate, smaller volume of intraoperative blood transfusion, shorter maximum incision length, and shorter hospital stay compared to the control group ( P<0.05). In the robot group, a total of 14 INFIX internal fixation frames and 280 cannulated screws were implanted, among which 250 screws were rated as excellent, 17 as good, and 13 as poor, resulting in a screw placement excellent and good rate of 95.36%. Radiological review revealed that the excellent and good rate of reduction quality was in 91.58% (87/95) in the robot group and 81.48% (66/81) in the control group, with no significant difference in postoperative maximum residual fracture displacement or reduction quality between the two groups (P>0.05). All patients in both groups were followed up 12-66 months, with an average of 28.9 months, and there was no significant difference in follow-up time between the two groups ( P>0.05). The fracture healing time in the robot group was significantly shorter than that in the control group ( P<0.05). At last follow-up, both groups showed significant improvement in VAS scores compared to preoperative values ( P<0.05); the change values of VAS scores, Majeed scores, and the excellent and good rate of Majeed pelvic function were significantly higher in the robot group than in the control group ( P<0.05). Regarding postoperative complications, there was no significant difference between the two groups in terms of gait changes, secondary surgeries, heterotopic ossification, incision infections, walking difficulties, internal fixation failure, or mortality rates ( P>0.05); however, the incidence of delayed wound healing was significantly lower in the robot group than in the control group ( P<0.05). CONCLUSION TiRobot-assisted minimally invasive treatment of elderly FFP is superior to traditional open reduction and internal fixation in terms of surgical trauma control, postoperative rehabilitation speed, and functional recovery.
Humans ; Male ; Retrospective Studies ; Female ; Minimally Invasive Surgical Procedures/instrumentation* ; Fracture Fixation, Internal/instrumentation* ; Pelvic Bones/surgery* ; Aged ; Bone Screws ; Bone Plates ; Robotic Surgical Procedures/methods* ; Aged, 80 and over ; Treatment Outcome ; Osteoporotic Fractures/surgery* ; Operative Time ; Blood Loss, Surgical ; Fracture Healing ; Fractures, Bone/surgery*

Protrusive facial deformities, characterized by the forward displacement of the teeth and/or jaws beyond the normal range, affect a considerable portion of the population. The manifestations and morphological mechanisms of protrusive facial deformities are complex and diverse, requiring orthodontists to possess a high level of theoretical knowledge and practical experience in the relevant orthodontic field. To further optimize the correction of protrusive facial deformities, this consensus proposes that the morphological mechanisms and diagnosis of protrusive facial deformities should be analyzed and judged from multiple dimensions and factors to accurately formulate treatment plans. It emphasizes the use of orthodontic strategies, including jaw growth modification, tooth extraction or non-extraction for anterior teeth retraction, and maxillofacial vertical control. These strategies aim to reduce anterior teeth and lip protrusion, increase chin prominence, harmonize nasolabial and chin-lip relationships, and improve the facial profile of patients with protrusive facial deformities. For severe skeletal protrusive facial deformities, orthodontic-orthognathic combined treatment may be suggested. This consensus summarizes the theoretical knowledge and clinical experience of numerous renowned oral experts nationwide, offering reference strategies for the correction of protrusive facial deformities.
Humans ; Orthodontics, Corrective/methods* ; Consensus ; Malocclusion/therapy* ; Patient Care Planning ; Cephalometry

The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

ObjectiveINF2 is a member of the formins family. Abnormal expression and regulation of INF2 have been associated with the progression of various tumors, but the expression and role of INF2 in hepatocellular carcinoma (HCC) remain unclear. HCC is a highly lethal malignant tumor. Given the limitations of traditional treatments, this study explored the expression level, clinical value and potential mechanism of INF2 in HCC in order to seek new therapeutic targets. MethodsIn this study, we used public databases to analyze the expression of INF2 in pan-cancer and HCC, as well as the impact of INF2 expression levels on HCC prognosis. Quantitative real time polymerase chain reaction (RT-qPCR), Western blot, and immunohistochemistry were used to detect the expression level of INF2 in liver cancer cells and human HCC tissues. The correlation between INF2 expression and clinical pathological features was analyzed using public databases and clinical data of human HCC samples. Subsequently, the effects of INF2 expression on the biological function and Drp1 phosphorylation of liver cancer cells were elucidated through in vitro and in vivo experiments. Finally, the predictive value and potential mechanism of INF2 in HCC were further analyzed through database and immunohistochemical experiments. ResultsINF2 is aberrantly high expression in HCC samples and the high expression of INF2 is correlated with overall survival, liver cirrhosis and pathological differentiation of HCC patients. The expression level of INF2 has certain diagnostic value in predicting the prognosis and pathological differentiation of HCC. In vivo and in vitro HCC models, upregulated expression of INF2 triggers the proliferation and migration of the HCC cell, while knockdown of INF2 could counteract this effect. INF2 in liver cancer cells may affect mitochondrial division by inducing Drp1 phosphorylation and mediate immune escape by up-regulating PD-L1 expression, thus promoting tumor progression. ConclusionINF2 is highly expressed in HCC and is associated with poor prognosis. High expression of INF2 may promote HCC progression by inducing Drp1 phosphorylation and up-regulation of PD-L1 expression, and targeting INF2 may be beneficial for HCC patients with high expression of INF2.

Biomolecular condensates are formed through phase separation of biomacromolecules such as proteins and RNAs. These condensates exhibit liquid-like properties that can futher transition into more stable material states. They form complex internal structures via multivalent weak interactions, enabling precise spatiotemporal regulations. However, the use of inconsistent and non-standardized terminology has become increasingly problematic, hindering academic exchange and the dissemination of scientific knowledge. Therefore, it is necessary to discuss the terminology related to biomolecular condensates in order to clarify concepts, promote interdisciplinary cooperation, enhance research efficiency, and support the healthy development of this field.