The medical ultrasonic nebulizer was introduced in terms of composition,working principle and testing principle and method of the maximum nebulization rate.The testing characteristics of the volumetric and gravimetric methods were compared.A series of experiments were conducted using the whole-unit gravimetric approach.The initial liquid charge was indicated to be the primary factor affecting the maximum nebulization rate,and the influence increased significantly when the nebulizer's nominal volume got expanded.References were provided for medical testing staffs in selecting testing methods.

Objective To analyze the characteristics of oral and maxillofacial injuries from military training and provide references for related prevention and treatment.Methods A retrospective analysis was conducted of the medical records of 111 patients with oral and maxillofacial military training injuries treated between 2014 and 2023.Results From 2014 to 2023,the number of hospitalized patients with maxillofacial military training injuries in the hospital trended upward.The top 3 training injuries in the spectrum of diseases were maxillofacial fractures(45.08％),maxillofacial space infections(28.83％),and temporomandibular joint injuries(18.92％).The average number of hospitalizations for all maxillofacial military training injuries was 1.33(1-4),and the median length of hospital stay was 8(5,12)days.The median hospitalization cost was 14 793.23(5236.18,24 255.25)yuan,and the improvement rate was 95.50％.Conclusion The number of patients hospitalized due to oral and maxillofacial military training injuries in this hospital is increasing year by year,and the injuries are mostly jaw fractures.Precautions should be taken to prevent maxillofacial training injuries.

The medical ultrasonic nebulizer was introduced in terms of composition,working principle and testing principle and method of the maximum nebulization rate.The testing characteristics of the volumetric and gravimetric methods were compared.A series of experiments were conducted using the whole-unit gravimetric approach.The initial liquid charge was indicated to be the primary factor affecting the maximum nebulization rate,and the influence increased significantly when the nebulizer's nominal volume got expanded.References were provided for medical testing staffs in selecting testing methods.

Objective:To explore the incidence status,influencing factors and short-term prognosis characteristics of early onset coronary heart disease in women in Wansheng District of Chongqing,and to provide scientific basis for formulating regional prevention and treatment strategies.Methods:This study was a single-center retrospective study,100 coronary heart disease in women from January 2022 to December 2023 at Chongqing Wansheng Economic and Technological Development Zone People's Hospital were prospective selected,and they were divided into early onset group of 40 cases(≤ 65 years old)and late onset group of 60 cases(＞65 years old)based on their age of onset.Another 60 healthy women who underwent physical examinations during the same period to exclude coronary heart disease were selected as the control group.Univariate factor and multiple factor logistic regression analysis were used to identify independent risk factors for early onset coronary heart disease in women.Draw receiver operating characteristic(ROC)curve for the subjects,the efficacy of risk factors in predicting early onset coronary heart disease based on the area under the curve(AUC)of ROC curve were evaluated.Patients were followed up for 1 year to observe the occurrence of major adverse cardiovascular events(MACE).Result:Among 100 fcoronary heart disease in women,the early onset group accounted for 40.00％(40/100).Univariate analysis showed that age,hyperlipidemia history,smoking history,hypertension history,family history,diabetes history,total cholesterol(TC),low-density lipoprotein cholesterol(LDL-C)were related to the early onset coronary heart disease.Multivariate analysis showed that,hyperlipidemia history(OR=4.124,95％CI:2.343-7.217),smoking history(OR=3.564),hypertension(OR=3.253),family history(OR=2.981),diabetes history(OR=2.873)were independent risk factors.ROC curve analysis results showed that joint evaluation had the best predictive value,with AUC of 0.829,which was higher than the AUC of individual evaluation for each factor.The incidence of MACE in the early onset group(45.00％)was significantly higher than that in the late onset group(P＜0.05).Conclusion:Early onset coronary heart disease in women in Wansheng District of Chongqing is related to the hyperlipidemia history,smoking,hypertension history,family history and diabetes history.The incidence of MACE in early-onset patients followed up for 1 year is higher than that in late-onset patients.

Objective:To explore the incidence status,influencing factors and short-term prognosis characteristics of early onset coronary heart disease in women in Wansheng District of Chongqing,and to provide scientific basis for formulating regional prevention and treatment strategies.Methods:This study was a single-center retrospective study,100 coronary heart disease in women from January 2022 to December 2023 at Chongqing Wansheng Economic and Technological Development Zone People's Hospital were prospective selected,and they were divided into early onset group of 40 cases(≤ 65 years old)and late onset group of 60 cases(＞65 years old)based on their age of onset.Another 60 healthy women who underwent physical examinations during the same period to exclude coronary heart disease were selected as the control group.Univariate factor and multiple factor logistic regression analysis were used to identify independent risk factors for early onset coronary heart disease in women.Draw receiver operating characteristic(ROC)curve for the subjects,the efficacy of risk factors in predicting early onset coronary heart disease based on the area under the curve(AUC)of ROC curve were evaluated.Patients were followed up for 1 year to observe the occurrence of major adverse cardiovascular events(MACE).Result:Among 100 fcoronary heart disease in women,the early onset group accounted for 40.00％(40/100).Univariate analysis showed that age,hyperlipidemia history,smoking history,hypertension history,family history,diabetes history,total cholesterol(TC),low-density lipoprotein cholesterol(LDL-C)were related to the early onset coronary heart disease.Multivariate analysis showed that,hyperlipidemia history(OR=4.124,95％CI:2.343-7.217),smoking history(OR=3.564),hypertension(OR=3.253),family history(OR=2.981),diabetes history(OR=2.873)were independent risk factors.ROC curve analysis results showed that joint evaluation had the best predictive value,with AUC of 0.829,which was higher than the AUC of individual evaluation for each factor.The incidence of MACE in the early onset group(45.00％)was significantly higher than that in the late onset group(P＜0.05).Conclusion:Early onset coronary heart disease in women in Wansheng District of Chongqing is related to the hyperlipidemia history,smoking,hypertension history,family history and diabetes history.The incidence of MACE in early-onset patients followed up for 1 year is higher than that in late-onset patients.

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

Peri-implant keratinized mucosa (PIKM) augmentation refers to surgical procedures aimed at increasing the width of PIKM. Consensus reports emphasize the necessity of maintaining a minimum width of PIKM to ensure long-term peri-implant health. Currently, several surgical techniques have been validated for their effectiveness in increasing PIKM. However, the selection and application of PIKM augmentation methods may present challenges for dental practitioners due to heterogeneity in surgical techniques, variations in clinical scenarios, and anatomical differences. Therefore, clear guidelines and considerations for PIKM augmentation are needed. This expert consensus focuses on the commonly employed surgical techniques for PIKM augmentation and the factors influencing their selection at second-stage surgery. It aims to establish a standardized framework for assessing, planning, and executing PIKM augmentation procedures, with the goal of offering evidence-based guidance to enhance the predictability and success of PIKM augmentation.
Humans ; Consensus ; Dental Implants ; Mouth Mucosa/surgery* ; Keratins

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

Methods:A total of 392 patients with seasonal allergic rhinitis were selected from the population of the epidemiological investigation project of allergic diseases in Hohhot, Inner Mongolia. The project was led by Department of Allergy, Beijing Shijitan Hospital, Capital Medical University, and assisted by Hohhot First Hospital from April to May 2023. The patients were randomly divided into a spleen aminopeptide group (296 cases) and control group (96 cases) at a ratio of 3∶1, and the enrollment period was from June 1 to 14, 2023. The treatment group was treated with spleen aminopeptide oral solution for 12 weeks starting from 4-6 weeks (±7 days) before the pollen dispersal period, while the control group was treated with a simulated agent of spleen aminopeptide oral solution. Both the treatment group and the control group were treated with oral antihistamines and/or nasal glucocorticoids as needed during the pollen dispersal period. Evaluate the therapeutic effect by comparing the symptom scores, drug scores and quality of life scores of the two groups, and detect the expression levels of cytokines in serum. Symptom scores, quality of life scores, drug scores and laboratory results were compared by independent sample t test/Kruskal-Wallis test and χ2 test/Fisher′s exact test. Results:Compared with the control group, spleen aminopeptide treatment for 12 weeks significantly improved symptoms of nasal congestion [ M( Q1, Q3):2(1, 2) vs. 2(1, 3), H=6.308, P<0.05], nasal itching [ M( Q1, Q3):2(1, 2) vs. 2(1, 3), H=4.966, P<0.05], sneezing [ M( Q1, Q3):2(1, 2) vs. 2(1, 3), H=5.245, P<0.05], runny nose [ M( Q1, Q3):2(1, 2) vs. 2(1, 3), H=5.41, P<0.05] and tearing [ M( Q1, Q3):1(0, 2) vs. 1(0, 3), H=4.664, P<0.05]. At 12 weeks of treatment, the scores of nasal symptoms and ocular symptoms in control group and experimental group were significantly increased compared with baseline ( P<0.05). In experimental group, nasal congestion [ M( Q1, Q3):1(0, 1) vs. 1(0, 2), H=4.042, P<0.05], eye itching/foreign body sensation/redness symptom scores [ M( Q1, Q3):1(0, 2) vs. 1(0, 2), H=5.302, P<0.05] and total scores [ M( Q1, Q3):4(-1, 9) vs. 5(0, 12.5), H=3.958, P<0.05] were significantly increased. The antihistamine drug score of the splenic peptide treatment group at 6 weeks were lower than that of the control group ( H=4.232, P<0.05). After 12 weeks of treatment, the antihistamine drug score [ M( Q1, Q3):10(0, 24) vs. 19(2, 36.5), H=6.67, P<0.05] and the total drug score [ M( Q1, Q3):28.5(5, 77.5) vs. 46(6, 155.5), H=3.995, P<0.05] were significantly lower than those of the control group. The serum IL-17A levels of the treatment group were significantly lower than those of the control group after 6 weeks (0.7±1.77 vs. 0.85±1.67 ,H=10.08, P<0.05) and 12 weeks (0.81±1.63 vs. 0.94±1.73, H=5.196, P<0.05) of splenic aminopeptide treatment. Conclusions:Early treatment with spleen aminopeptide oral solution can significantly improve nasal and ocular symptoms of patients with seasonal allergic rhinitis, reduce the use of drugs during the onset period, and improve the quality of life. It may exert an immunomodulatory effect by reducing the expression level of IL-17A in the serum of patients.Objects:To conduct a study on the prevention and treatment of seasonal allergic rhinitis in Hohhot, Inner Mongolia, evaluate the preventive and therapeutic effects of spleen aminopeptide oral solution on seasonal allergic rhinitis, and explore its related mechanisms.