Metabolic associated fatty liver disease (MAFLD) is fundamentally driven by an imbalance in hepatic fatty-acid flux: the influx of fatty acids exceeds the liver’s capacity for disposal, resulting in excessive hepatic lipid accumulation, predominantly in the form of triglycerides (TGs). The occurrence and progression of MAFLD depend on disordered regulation across multiple metabolic steps, including fatty-acid uptake, de novo lipogenesis (DNL), fatty-acid oxidation (FAO), and very low-density lipoprotein (VLDL) export. Forkhead box protein O1 (FOXO1) is a key transcriptional regulator within the hepatic network coordinating glucose and lipid metabolism. Under metabolic stress and insulin resistance (IR), FOXO1 expression is frequently increased, whereas its inhibitory phosphorylation is reduced. These changes enhance FOXO1 nuclear localization and transcriptional activity, thereby reprogramming the expression of genes related to metabolism in the liver. Because hepatic lipid deposition is the central pathological feature of MAFLD, the functional status of FOXO1 directly influences hepatic lipid homeostasis. Growing evidence suggests that FOXO1 can exert bidirectional, environment-dependent effects on hepatic lipid accumulation; however, the molecular basis for this functional switch remains incompletely understood. This review systematically summarizes the biological functions and regulatory mechanisms of FOXO1 and its roles in hepatic lipid metabolism, with a particular focus on its crosstalk with insulin signaling. FOXO1 expression is shaped by RNA modifications and epigenetic regulation mediated by non-coding RNAs. Its transcriptional output is precisely governed by post-translational modifications—such as phosphorylation and acetylation—as well as by coordinated nucleocytoplasmic shuttling. Notably, these regulatory patterns vary markedly across nutritional states, degrees of insulin resistance, and stages of disease. In the fed state, insulin/IGF-1 signaling activates the PI3K-AKT pathway, promoting the inhibitory phosphorylation of FOXO1 and facilitating additional modifications, including acetylation, methylation, and ubiquitination. Together, these events drive FOXO1 export from the nucleus and dampen its transcriptional activity, suppressing gluconeogenesis and constraining lipogenic programs. Conversely, during fasting or when insulin signaling is weakened, FOXO1 inhibition is relieved. FOXO1 accumulates in the nucleus, binds to DNA, and regulates the transcription of downstream target genes. Mechanistically, FOXO1 can aggravate hepatic lipid accumulation by activating genes involved in TG synthesis while repressing FAO-related pathways, thereby favoring storage over oxidation. However, under specific conditions, FOXO1 may also alleviate the hepatic lipid burden by promoting TG hydrolysis and enhancing VLDL secretion, thereby reducing the net hepatic lipid load. In addition, lipotoxic signals mediated by ceramides and diacylglycerols (Cer/DAG) activate atypical protein kinase C (aPKC), further exacerbating the disruption of the AKT-FOXO1 axis. This vicious cycle ultimately produces a metabolic paradox in which increased hepatic glucose output coexists with persistent, insulin-independent lipogenesis, accelerating MAFLD progression. Importantly, FOXO1 regulation is not uniform: during early metabolic overload, insulin-mediated suppression may remain effective, whereas in advanced insulin resistance, the loss of AKT control permits sustained FOXO1 activity. Such stage-dependent dynamics may help explain why FOXO1 can either promote steatosis or, in certain contexts, support programs that facilitate lipid turnover. Accordingly, interventions should be liver-specific and tuned to the disease stage, aiming to curb maladaptive FOXO1 signaling while preserving its capacity to promote triglyceride hydrolysis and VLDL secretion when advantageous. Overall, this review offers an important perspective on MAFLD pathogenesis, emphasizing FOXO1 as a potential therapeutic target and providing a theoretical basis for developing liver-specific, disease-course-dependent precision interventions.

Emodin is a hydroxyanthraquinone compound that is widely distributed and has multiple pharmacological activities, including anti-diarrheal, anti-inflammatory, and liver-protective effects. Research indicates that emodin may be one of the main components responsible for inducing hepatotoxicity. However, studies on the mechanisms of liver injury are relatively limited, particularly those related to bile acids(BAs) metabolism. This study aims to systematically investigate the effects of different dosages of emodin on BAs metabolism, providing a basis for the safe clinical use of traditional Chinese medicine(TCM)containing emodin. First, this study evaluated the safety of repeated administration of different dosages of emodin over a 5-week period, with a particular focus on its impact on the liver. Next, the composition and content of BAs in serum and liver were analyzed. Subsequently, qRT-PCR was used to detect the mRNA expression of nuclear receptors and transporters related to BAs metabolism. The results showed that 1 g·kg~(-1) emodin induced hepatic damage, with bile duct hyperplasia as the primary pathological manifestation. It significantly increased the levels of various BAs in the serum and primary BAs(including taurine-conjugated and free BAs) in the liver. Additionally, it downregulated the mRNA expression of farnesoid X receptor(FXR), retinoid X receptor(RXR), and sodium taurocholate cotransporting polypeptide(NTCP), and upregulated the mRNA expression of cholesterol 7α-hydroxylase(CYP7A1) in the liver. Although 0.01 g·kg~(-1) and 0.03 g·kg~(-1) emodin did not induce obvious liver injury, they significantly increased the level of taurine-conjugated BAs in the liver, suggesting a potential interference with BAs homeostasis. In conclusion, 1 g·kg~(-1) emodin may promote the production of primary BAs in the liver by affecting the FXR-RXR-CYP7A1 pathway, inhibit NTCP expression, and reduce BA reabsorption in the liver, resulting in BA accumulation in the peripheral blood. This disruption of BA homeostasis leads to liver injury. Even doses of emodin close to the clinical dose can also have a certain effect on the homeostasis of BAs. Therefore, when using traditional Chinese medicine or formulas containing emodin in clinical practice, it is necessary to regularly monitor liver function indicators and closely monitor the risk of drug-induced liver injury.
Emodin/administration & dosage* ; Bile Acids and Salts/metabolism* ; Animals ; Male ; Liver/injuries* ; Chemical and Drug Induced Liver Injury/genetics* ; Drugs, Chinese Herbal/adverse effects* ; Humans ; Rats, Sprague-Dawley ; Mice ; Rats

Objective To investigate the efficacy and safety of CT-guided radioactive 125I seed implantation(ISI)for blocking celiac plexus in the treatment of refractory abdominal cancerous pain.Methods The clinical data of 60 patients with refractory cancerous pain caused by abdominal malignancies(visual analogue scale score ≥4 points)were retrospectively analyzed.Patients of group A(n=29)received anhydrous ethanol injection treatment and patients of group B(n=29)received ISI treatment.The primary endpoints were pain score(visual analogue scale,VAS),daily morphine consumption(DMC),and local tumor control(LTC)rate.Secondary endpoints included the success rate of the procedure and postoperative complications.Results The technical success rate of surgery was 100％in both groups,and no serious complications occurred after surgery.The VAS pain scores in both groups showed a continuous decline from 1 to 8 weeks after surgery,but the difference was not statistically significant.However,the VAS scores in group A was significantly increased at T8 to T12 weeks(P＜0.01).In contrast,the pain relief time in group B remained stable until T16 to T24 weeks when an increase in pain improvement was observed.At T8 week,the LTC rate in group B was significantly better than that in group A,and the difference was statistically significant(P＜0.01).Conclusion Celiac plexus block with ISI can effectively alleviate the refractory cancerous pain caused by abdominal tumors.Compared with anhydrous ethanol injection,ISI has a longer pain relief time(up to T16-T24 weeks)and can effectively control the growth of local tumor,which is worthy of clinical promotion and application.

Objective Based on the finite element simulation analysis of the patient's torso-spine model and combined with theoretical calculation data,an individualized scoliosis orthosis was designed,and the effectiveness of the orthosis was verified through three-dimensional(3D)printing.Methods A patient with idiopathic scoliosis was chosen as the research object.Reverse engineering technology and computer-aided technology were used to establish the torso-spine model of the patient.The finite element method was used to analyze the model,and the optimal position and magnitude of the corrective force were determined by combining literature theory calculation.Based on this,an orthosis was designed.To verify the orthopedic effect,the patient's X-rays before and after wearing the orthosis were compared and evaluated,and the patient was followed up 6 months later.Results The optimal position and magnitude of the initial corrective force were determined through theoretical calculations and finite element simulations.Specifically,a 62.95 N corrective force applied to the L3 vertebral body and the left posterior region corresponding to the upper and lower intervertebral discs in the patient's lateral curvature segment of the spine to achieve the optimal orthopedic effect.On this basis,the orthosis was designed,followed by relevant experimental tests before and after wearing the designed orthosis.By comparing X-ray images of the patient before and after wearing the orthosis and combining them with follow-up data six months later,the optimized design of the orthosis met the expected clinical requirements for orthopedic effects.Conclusions The design of orthosis needs to be personalized according to the specific situation of patients with scoliosis.This study takes a patient with idiopathic scoliosis as the research object,providing new ideas and methods for the design of orthosis for patients with idiopathic scoliosis.

Objective Based on the finite element simulation analysis of the patient's torso-spine model and combined with theoretical calculation data,an individualized scoliosis orthosis was designed,and the effectiveness of the orthosis was verified through three-dimensional(3D)printing.Methods A patient with idiopathic scoliosis was chosen as the research object.Reverse engineering technology and computer-aided technology were used to establish the torso-spine model of the patient.The finite element method was used to analyze the model,and the optimal position and magnitude of the corrective force were determined by combining literature theory calculation.Based on this,an orthosis was designed.To verify the orthopedic effect,the patient's X-rays before and after wearing the orthosis were compared and evaluated,and the patient was followed up 6 months later.Results The optimal position and magnitude of the initial corrective force were determined through theoretical calculations and finite element simulations.Specifically,a 62.95 N corrective force applied to the L3 vertebral body and the left posterior region corresponding to the upper and lower intervertebral discs in the patient's lateral curvature segment of the spine to achieve the optimal orthopedic effect.On this basis,the orthosis was designed,followed by relevant experimental tests before and after wearing the designed orthosis.By comparing X-ray images of the patient before and after wearing the orthosis and combining them with follow-up data six months later,the optimized design of the orthosis met the expected clinical requirements for orthopedic effects.Conclusions The design of orthosis needs to be personalized according to the specific situation of patients with scoliosis.This study takes a patient with idiopathic scoliosis as the research object,providing new ideas and methods for the design of orthosis for patients with idiopathic scoliosis.

Objective To develop an intelligent horizontal rotating cell culture device with high modularity,easy operation,easy disinfection,low cost and high stability.Methods The cell culture device consisted of a rotating culture module,a dirve module,a control module and control software,with the shells of all the modules being manufactured by 3D printing.The rotating culture module was composed of a tubular electrospun scaffold,a cell culture chamber,a magnetic coupling rotor and polypropylene pipeline;the drive module was made up of a N20 reduction motor and a magnetic coupling rotor;the control module included an ESP-8266 chip and a printed circuit board;the control software was developed with Blinker IoT platform and C++language.The device was used to culture human intrahepatic bile duct epithelial cells to verify its effects.Results Light microscopy and scanning electron microscopy images showed that a uniform and continuous cell layer was formed on the surface of the tubular electrospun scaffold.Conclusion The intelligent horizontal rotating cell culture device achieves uniform growth of cells on the inner surface of tubular electrospun scaffolds,and can be used as an effective platform for cell culture on tubular scaffolds.[Chinese Medical Equipment Journal,2024,45(9):41-45]

Objective To monitor the susceptibility of clinical isolates to antimicrobial agents in healthcare facilities in major regions of China in 2023.Methods Clinical isolates collected from 73 hospitals across China were tested for antimicrobial susceptibility using a unified protocol based on disc diffusion method or automated testing systems.Results were interpreted using the 2023 Clinical & Laboratory Standards Institute (CLSI) breakpoints.Results A total of 445199 clinical isolates were collected in 2023,of which 29.0％ were gram-positive and 71.0％ were gram-negative.The prevalence of methicillin-resistant strains in Staphylococcus aureus,Staphylococcus epidermidis and other coagulase-negative Staphylococcus species (excluding Staphylococcus pseudintermedius and Staphylococcus schleiferi) (MRSA,MRSE and MRCNS) was 29.6％,81.9％ and 78.5％,respectively.Methicillin-resistant strains showed significantly higher resistance rates to most antimicrobial agents than methicillin-susceptible strains (MSSA,MSSE and MSCNS).Overall,92.9％ of MRSA strains were susceptible to trimethoprim-sulfamethoxazole and 91.4％ of MRSE strains were susceptible to rifampicin.No vancomycin-resistant strains were found.Enterococcus faecalis had significantly lower resistance rates to most antimicrobial agents tested than Enterococcus faecium.A few vancomycin-resistant strains were identified in both E.faecalis and E.faecium.The prevalence of penicillin-susceptible Streptococcus pneumoniae was 93.1％ in the isolates from children and and 95.9％ in the isolates from adults.The resistance rate to carbapenems was lower than 15.0％ for most Enterobacterales species except for Klebsiella,22.5％ and 23.6％ of which were resistant to imipenem and meropenem,respectively .Most Enterobacterales isolates were highly susceptible to tigecycline,colistin and polymyxin B,with resistance rates ranging from 0.6％ to 10.0％.The resistance rate to imipenem and meropenem was 21.9％ and 17.4％ for Pseudomonas aeruginosa,respectively,and 67.5％ and 68.1％ for Acinetobacter baumannii,respectively.Conclusions Increasing resistance to the commonly used antimicrobial agents is still observed in clinical bacterial isolates.However,the prevalence of important crabapenem-resistant organisms such as crabapenem-resistant K.pneumoniae,P.aeruginosa,and A.baumannii showed a slightly decreasing trend.This finding suggests that strengthening bacterial resistance surveillance and multidisciplinary linkage are important for preventing the occurrence and development of bacterial resistance.

Objective To monitor the susceptibility of clinical isolates to antimicrobial agents in tertiary hospitals in major regions of China in 2022.Methods Clinical isolates from 58 hospitals in China were tested for antimicrobial susceptibility using a unified protocol based on disc diffusion method or automated testing systems.Results were interpreted using the 2022 Clinical &Laboratory Standards Institute(CLSI)breakpoints.Results A total of 318 013 clinical isolates were collected from January 1,2022 to December 31,2022,of which 29.5％were gram-positive and 70.5％were gram-negative.The prevalence of methicillin-resistant strains in Staphylococcus aureus,Staphylococcus epidermidis and other coagulase-negative Staphylococcus species(excluding Staphylococcus pseudintermedius and Staphylococcus schleiferi)was 28.3％,76.7％and 77.9％,respectively.Overall,94.0％of MRSA strains were susceptible to trimethoprim-sulfamethoxazole and 90.8％of MRSE strains were susceptible to rifampicin.No vancomycin-resistant strains were found.Enterococcus faecalis showed significantly lower resistance rates to most antimicrobial agents tested than Enterococcus faecium.A few vancomycin-resistant strains were identified in both E.faecalis and E.faecium.The prevalence of penicillin-susceptible Streptococcus pneumoniae was 94.2％in the isolates from children and 95.7％in the isolates from adults.The resistance rate to carbapenems was lower than 13.1％in most Enterobacterales species except for Klebsiella,21.7％-23.1％of which were resistant to carbapenems.Most Enterobacterales isolates were highly susceptible to tigecycline,colistin and polymyxin B,with resistance rates ranging from 0.1％to 13.3％.The prevalence of meropenem-resistant strains decreased from 23.5％in 2019 to 18.0％in 2022 in Pseudomonas aeruginosa,and decreased from 79.0％in 2019 to 72.5％in 2022 in Acinetobacter baumannii.Conclusions The resistance of clinical isolates to the commonly used antimicrobial agents is still increasing in tertiary hospitals.However,the prevalence of important carbapenem-resistant organisms such as carbapenem-resistant K.pneumoniae,P.aeruginosa,and A.baumannii showed a downward trend in recent years.This finding suggests that the strategy of combining antimicrobial resistance surveillance with multidisciplinary concerted action works well in curbing the spread of resistant bacteria.

As artificial intelligence technology rapidly advances, its deployment within the medical sector presents substantial ethical challenges. Consequently, it becomes crucial to create a standardized, transparent, and secure framework for processing medical data. This includes setting the ethical boundaries for medical artificial intelligence and safeguarding both patient rights and data integrity. This consensus governs every facet of medical data handling through artificial intelligence, encompassing data gathering, processing, storage, transmission, utilization, and sharing. Its purpose is to ensure the management of medical data adheres to ethical standards and legal requirements, while safeguarding patient privacy and data security. Concurrently, the principles of compliance with the law, patient privacy respect, patient interest protection, and safety and reliability are underscored. Key issues such as informed consent, data usage, intellectual property protection, conflict of interest, and benefit sharing are examined in depth. The enactment of this expert consensus is intended to foster the profound integration and sustainable advancement of artificial intelligence within the medical domain, while simultaneously ensuring that artificial intelligence adheres strictly to the relevant ethical norms and legal frameworks during the processing of medical data.
Artificial Intelligence/legislation & jurisprudence* ; Humans ; Consensus ; Computer Security/standards* ; Confidentiality/ethics* ; Informed Consent/ethics*

Objective To monitor the susceptibility of clinical isolates to antimicrobial agents in healthcare facilities in major regions of China in 2023.Methods Clinical isolates collected from 73 hospitals across China were tested for antimicrobial susceptibility using a unified protocol based on disc diffusion method or automated testing systems.Results were interpreted using the 2023 Clinical & Laboratory Standards Institute (CLSI) breakpoints.Results A total of 445199 clinical isolates were collected in 2023,of which 29.0％ were gram-positive and 71.0％ were gram-negative.The prevalence of methicillin-resistant strains in Staphylococcus aureus,Staphylococcus epidermidis and other coagulase-negative Staphylococcus species (excluding Staphylococcus pseudintermedius and Staphylococcus schleiferi) (MRSA,MRSE and MRCNS) was 29.6％,81.9％ and 78.5％,respectively.Methicillin-resistant strains showed significantly higher resistance rates to most antimicrobial agents than methicillin-susceptible strains (MSSA,MSSE and MSCNS).Overall,92.9％ of MRSA strains were susceptible to trimethoprim-sulfamethoxazole and 91.4％ of MRSE strains were susceptible to rifampicin.No vancomycin-resistant strains were found.Enterococcus faecalis had significantly lower resistance rates to most antimicrobial agents tested than Enterococcus faecium.A few vancomycin-resistant strains were identified in both E.faecalis and E.faecium.The prevalence of penicillin-susceptible Streptococcus pneumoniae was 93.1％ in the isolates from children and and 95.9％ in the isolates from adults.The resistance rate to carbapenems was lower than 15.0％ for most Enterobacterales species except for Klebsiella,22.5％ and 23.6％ of which were resistant to imipenem and meropenem,respectively .Most Enterobacterales isolates were highly susceptible to tigecycline,colistin and polymyxin B,with resistance rates ranging from 0.6％ to 10.0％.The resistance rate to imipenem and meropenem was 21.9％ and 17.4％ for Pseudomonas aeruginosa,respectively,and 67.5％ and 68.1％ for Acinetobacter baumannii,respectively.Conclusions Increasing resistance to the commonly used antimicrobial agents is still observed in clinical bacterial isolates.However,the prevalence of important crabapenem-resistant organisms such as crabapenem-resistant K.pneumoniae,P.aeruginosa,and A.baumannii showed a slightly decreasing trend.This finding suggests that strengthening bacterial resistance surveillance and multidisciplinary linkage are important for preventing the occurrence and development of bacterial resistance.