Objective To analyze the distribution status of the end digits of standardized blood pressure measurement recordings in the clinic and the effectiveness of standardized blood pressure measurement for community hypertension screening. Methods The first visit blood pressure measurement data from the Community Health Service Center in Jing'an District, Shanghai from June 2023 to May 2024 were collected and analyzed. According to different measurement methods, the data were divided into two groups: standardized blood pressure measurement and conventional blood pressure measurement. SPSS 19.0 software was used for data analysis. The differences in the distribution balance of the end digits of blood pressure values and the detection rate of blood pressure elevation between the two different groups were analyzed. Results The frequency range of the end digits of blood pressure recorded values in the standardized pressure measurement group was 9.42% to 10.83%, and the detection rate of elevated blood pressure was 24.89%. The conventional pressure measurement group had a preference of the end digit ^"0^", and the detection rate of elevated blood pressure was only 2.12%. The results of multiple logistic regression analysis showed that gender, age, season, and different blood pressure measurement modes were all influencing factors for the detection rate of elevated blood pressure. Conclusion The standardized blood pressure measurement mode in the clinic is suitable for community hypertension screening and pressure measurement, with higher data quality than the conventional pressure measurement mode.

ObjectiveThe malaria parasites remodel the host erythrocyte structure by exporting parasite proteins that interact with the membrane skeleton proteins of red blood cells (RBCs), facilitating their intracellular survival and pathogenicity. Skeleton-binding protein 1 (SBP1) is a conserved exported protein across Plasmodium species. In Plasmodium falciparum, SBP1 has been reported to interact with erythrocyte membrane skeleton proteins 4.1R and spectrin, while its contribution to erythrocyte remodeling and parasite virulence in Plasmodium berghei (Pb) remains unclear. This study aims to determine whether PbSBP1 associates with the host cytoskeletal protein 4.1R and to investigate its role in the remodeling of host RBCs and the pathogenicity of Plasmodium berghei. MethodsIn Plasmodium berghei, the relationship between PbSBP1 and the erythrocyte cytoskeletal protein 4.1R was examined using co-immunoprecipitation. A Pbsbp1 gene knockout mutant of Plasmodium berghei (Pbsbp1∆) was generated based on the principle of double crossover homologous recombination. The deformability of erythrocytes infected with Pbsbp1∆ parasites was assessed using microfluidic methods. Microchannels with an array of cylindrical pillars were used to detect modifications in infected RBC deformability. The infected RBCs were squashed between the rows and recovered between the columns and the transit velocity (μm/s) of infected RBCs travelling through the microchannel was recorded. The component of the erythrocyte membrane skeleton junctional complex, tropomodulin (TMOD), was fluorescently labeled, and the cytoskeletal network of infected erythrocytes was imaged using super-resolution stochastic optical reconstruction microscopy (STORM) to analyze ultrastructural changes in the cytoskeleton of wild-type (WT) and Pbsbp1∆-infected erythrocytes. Actin-based junctional complexes were displayed as individual clusters by the labeled TMOD in the STORM images, and the cluster densities and distances between adjacent clusters of infected RBCs were calculated. Additionally, rodent malaria models (BALB/c mice) and experimental cerebral malaria models (C57BL/6 mice) were employed to monitor the growth of Pbsbp1∆ and WT parasites during the intraerythrocytic stage and their capacity to induce cerebral malaria in mice. ResultsPbSBP1 may participate in the remodeling of infected erythrocytes through direct or indirect interaction with the erythrocyte cytoskeletal protein 4.1R. Microfluidic assays revealed that the deformability of erythrocytes infected with Pbsbp1∆ parasites was significantly enhanced compared to those infected with WT parasites. STORM imaging further demonstrated that the ultrastructure of the erythrocyte cytoskeleton in Pbsbp1∆-infected cells was altered relative to that in WT-infected erythrocytes. The distances between nearest neighbors of clusters had a tendency to increase while the cluster densities were decreased in Pbsbp1∆-infected RBCs compared to WT-infected RBCs. Subsequent phenotypic analysis indicated that the growth rate of Pbsbp1∆ parasites during the intraerythrocytic stage was significantly slower than that of WT parasites, and their ability to induce cerebral malaria in mice was also attenuated. These findings suggest that PbSBP1 is involved in the remodeling of the erythrocyte membrane skeleton, likely through its direct or indirect interaction with protein 4.1R, thereby regulating the deformability of infected erythrocytes and influencing the pathogenicity of the blood-stage parasites. ConclusionThis study establishes a role for PbSBP1 in host erythrocyte remodeling and parasite virulence, providing new research strategies for the prevention and treatment of malaria.

Blood standardization is a crucial means of promoting the healthy and sustainable development of China's blood industry. The construction of a blood standard system serves as the foundational work for blood standardization. To facilitate the continuous improvement of blood standardization efforts, this paper begins by describing the current status and analyzing the issues within China's blood standard system. Through systematic research, it proposes a framework for constructing a blood standard system and offers revision recommendations for its enhancement. Based on the first five editions of the blood standard system developed by Sub-Committee of Blood Standards of National Committee of Health Standards, this study further refines the revision and detailed construction of the standards framework—the primary task in establishing the blood standard system. It provides specific guidance for both the construction and application of the blood standard system. This work serves as a reference and basis for the reasonable and standardized formulation and revision of blood standards, as well as for the management and implementation of blood standardization efforts.

ObjectiveCerebrospinal fluid (CSF) plays a crucial role in maintaining the homeostasis of the central nervous system (CNS). CSF rapidly exchanges with interstitial fluid (ISF) via the glymphatic system within the brain parenchyma. CSF-ISF circulation and its associated mechanisms are often referred to as the brain lymphatic system. This system is connected directly to meningeal lymphatic vessels (mLVs), jointly performing the function of clearing metabolic waste from the CNS. Emerging evidence indicates that this system is closely associated with the onset and progression of neurodegenerative diseases (NDs) such as Alzheimer’s disease (AD). Importantly, abnormal CSF circulation is not only a downstream consequence of AD pathology, but also a risk factor. In AD, the dynamics of CSF flow within the CNS are diminished, immune dysregulation occurs, and this may increase the risk of AD by exacerbating the burden of amyloid β-protein (Aβ). In the mouse model of AD, impaired CSF flow compromises this clearance function, leading to cognitive deficits. Clinically, acupuncture at cognition-related acupoints is commonly used for the prevention and treatment of AD. However, whether its therapeutic effects are mediated through the modulation of CSF dynamics remains unclear. This study aimed to evaluate the impact of acupuncture on CSF flow and investigate its acupoint specificity. MethodsMice were randomly assigned to experimental groups for the different electroacupuncture groups with the following acupoints: Baihui point (GV 20), Ear point, Neiguan point (PC 6), and Tianshu point (ST 25). Wild-type mice on a C57BL/6J background were used as controls. Fluorescent tracer was injected into the cisterna magna to label CSF flow. Fluorescence imaging was employed to assess the distribution of CSF within the brain before and after acupuncture stimulation. ResultsFollowing tracer injection into the cisterna magna, fluorescence signals rapidly reached the cerebellum and medulla—the regions closest to the injection site. Fluorescence intensity was higher in ventral brain regions compared to dorsal regions, likely due to greater vascular density in ventral areas facilitating CSF-ISF exchange. Electroacupuncture at the GV 20 produced the most pronounced enhancement of CSF across the whole brain, while stimulation at the ST 25 primarily augmented flow within subcortical regions. In contrast, electroacupuncture at the Ear point or the PC 6 had no observable effect on CSF in mice. ConclusionElectroacupuncture promotes CSF flow into the brain parenchyma in an acupoint-specific manner, with GV 20 exhibiting the most pronounced enhancement of CSF dynamics. These findings suggest that acupuncture-mediated facilitation of CSF flow may represent a potential therapeutic strategy for preventing or delaying age-related cognitive decline.

ObjectiveCerebrospinal fluid (CSF) plays a crucial role in maintaining the homeostasis of the central nervous system (CNS). CSF rapidly exchanges with interstitial fluid (ISF) via the glymphatic system within the brain parenchyma. CSF-ISF circulation and its associated mechanisms are often referred to as the brain lymphatic system. This system is connected directly to meningeal lymphatic vessels (mLVs), jointly performing the function of clearing metabolic waste from the CNS. Emerging evidence indicates that this system is closely associated with the onset and progression of neurodegenerative diseases (NDs) such as Alzheimer’s disease (AD). Importantly, abnormal CSF circulation is not only a downstream consequence of AD pathology, but also a risk factor. In AD, the dynamics of CSF flow within the CNS are diminished, immune dysregulation occurs, and this may increase the risk of AD by exacerbating the burden of amyloid β-protein (Aβ). In the mouse model of AD, impaired CSF flow compromises this clearance function, leading to cognitive deficits. Clinically, acupuncture at cognition-related acupoints is commonly used for the prevention and treatment of AD. However, whether its therapeutic effects are mediated through the modulation of CSF dynamics remains unclear. This study aimed to evaluate the impact of acupuncture on CSF flow and investigate its acupoint specificity. MethodsMice were randomly assigned to experimental groups for the different electroacupuncture groups with the following acupoints: Baihui point (GV 20), Ear point, Neiguan point (PC 6), and Tianshu point (ST 25). Wild-type mice on a C57BL/6J background were used as controls. Fluorescent tracer was injected into the cisterna magna to label CSF flow. Fluorescence imaging was employed to assess the distribution of CSF within the brain before and after acupuncture stimulation. ResultsFollowing tracer injection into the cisterna magna, fluorescence signals rapidly reached the cerebellum and medulla—the regions closest to the injection site. Fluorescence intensity was higher in ventral brain regions compared to dorsal regions, likely due to greater vascular density in ventral areas facilitating CSF-ISF exchange. Electroacupuncture at the GV 20 produced the most pronounced enhancement of CSF across the whole brain, while stimulation at the ST 25 primarily augmented flow within subcortical regions. In contrast, electroacupuncture at the Ear point or the PC 6 had no observable effect on CSF in mice. ConclusionElectroacupuncture promotes CSF flow into the brain parenchyma in an acupoint-specific manner, with GV 20 exhibiting the most pronounced enhancement of CSF dynamics. These findings suggest that acupuncture-mediated facilitation of CSF flow may represent a potential therapeutic strategy for preventing or delaying age-related cognitive decline.

Background: Malignant pleural effusion (MPE), a common complication of advanced cancers, is associated with poor prognosis and reduced quality of life. Although host–tumor interactions are known to drive MPE development, the associated immune dynamics during disease progression remain unclear. Using a Lewis lung carcinoma-induced MPE model in C57BL/6JNidfc mice, we systematically evaluated general parameters and immune cell changes at two-day intervals throughout disease progression. Results: The day of Lewis lung carcinoma cell injection into the pleural space was designated as day 0. By day 10 post-injection (p.i.), MPE-bearing mice exhibited ~ 10% body weight loss, marking the experimental endpoint. Pleural tumor mass and pleural effusion volume were minimal up to day 4 p.i. but increased sharply from day 6 onward.CD45⁺ immune cell counts rose over time, and days 6, 8, and 10 p.i. marked key stages of MPE progression. On day 6, B cells, T cells, and natural killer cells, but not macrophages and neutrophils, increased significantly compared to earlier timepoints. By day 8, all immune cell subsets except T cells exceeded day 6 levels, and at day 10, natural killer cell numbers declined while others continued to increase. Besides, the numbers of CD8⁺ T cells, Th1 cells, regulatory T cells, and M2 macrophages progressively increased from day 6 to 10. Based on these data, days 6 and 10 were defined as early and advanced MPE stages, respectively, with distinct immune phenotypes. In advanced MPE, CD8⁺ T cells displayed reduced IFN-γ, TNF-α, Granzyme B, Perforin, FasL, and Ki-67, but upregulated PD-1 and CTLA-4 relative to early stage. Similarly, Th1 cells showed decreased IFN-γ, TNF-α, and IL-2 production along with reduced Ki-67 expression. Advanced-stage M2 macrophages exhibited lower MHC-II levels and impaired phagocytosis, but higher PD-L1 and IL-10 production, while neutrophils showed reduced TNF-α release and phagocytic activity. Conclusions Our findings characterize the temporal immune dynamics associated with MPE progression in a mouse model, revealing a transition from an early immunostimulatory state to a late immunosuppressive state. This study enhances our understanding of MPE immunopathogenesis and provides a foundation for developing precise, stagespecific therapeutic strategies.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

This consensus will introduce the characteristics of fillers used in the surgical cavities of domestic nasal surgery patients based on relevant literature and expert opinions. It will also provide recommendations for the selection of cavity fillers for different nasal diseases, with chronic sinusitis as a representative example.
Humans ; Nasal Cavity/surgery* ; Nasal Surgical Procedures ; China ; Consensus ; Sinusitis/surgery* ; Dermal Fillers

In current clinical practice, various dermal templates and skin substitutes are used to enhance wound healing. However, the role of wound commensal microbiome in regulating scaffold performance and the healing process remains unclear. In this study, we investigated the influence of both natural and synthetic scaffolds on the wound commensal microbiome and wound repair in three distinct models including diabetic wounds, burn injuries, and germ-free (GF) wounds. Remarkably, synthetic electrospun polycaprolactone (PCL) scaffolds were observed to positively promote microbiome diversity, leading to enhanced diabetic wound healing compared to the natural scaffolds Integra® (INT) and MatriDerm® (MAD). In contrast, both natural and synthetic scaffolds exhibited comparable effects on the diversity of the microbiome and the healing of burn injuries. In GF wounds with no detectable microorganisms, a reversed healing rate was noted showing natural scaffold (MAD) accelerated wound repair compared to the open or the synthetic scaffold (PCL) treatment. Furthermore, the response of the wound commensal microbiome to PCL scaffolds appears pivotal in promoting anti-inflammatory factors during diabetic wound healing. Our results emphasize that the wound commensal microbiome, mediated by different scaffolds plays an important role in the wound healing process.