ObjectiveTo investigate the current awareness and optimization recommendations on pneumonia with unknown etiology (PUE) surveillance among Shanghai healthcare professionals, and to provide evidence for the improvement of the surveillance system. MethodsIn December 2024, healthcare professional participants from diverse medical and health institutions were randomly selected within each stratum using a stratified cluster sampling method in all 16 districts of Shanghai for questionnaire surveys on their knowledge and suggestions for optimization of the PUE surveillance system. Descriptive statistics analyses, multivariate logistic regressions, and content analyses were used for data analyses. ResultsA total of 385 survey subjects were involved in the study, including 119 professional staffs from disease prevention and control centers and 266 from medical institutions. Those who understood the case definition for PUE correctly accounted for 67.01% (258/385). Multivariate regression model analyses showed that female gender (aOR=2.22, 95%CI: 1.36‒3.66), professionals from disease control institutions (aOR=2.02, 95%CI: 1.12‒3.72), and those who self-assessed as being familiar with the monitoring system (aOR=2.18, 95%CI:1.23‒3.89) had better understanding of the definition. Overall, 89.61% (345/385) of the survey subjects acknowledged the necessity of the surveillance system. Small number of cases meeting the case definition (54.46%, 214/379), insufficient diagnostic awareness (39.84%, 151/379), and lack of incentives for case reporting (29.29%, 111/379) were major problems for the current surveillance system, with variations observed across different types of institutions. Suggested segments for optimizing the surveillance system included monitoring purpose, case definition, form of monitoring and reporting procedure, organization mechanism, and epidemiological investigation and response. ConclusionThe necessity of PUE surveillance is commonly recognized among healthcare workers. However, the existing system falls short in terms of mastery of case definition and overall surveillance adaptability. There is an urgent need for optimization and improvement to enhance the capacity for preventing and controlling emerging and sudden respiratory infectious diseases.

The prevalence of metabolic dysfunction-associated steatotic liver disease (MASLD) is higher among individuals with inflammatory bowel disease (IBD) than in the general population. Emerging evidence indicates that the development of MASLD in patients with IBD may occur independently of traditional metabolic risk factors, suggesting a unique pathophysiological mechanism distinct from conventional MASLD pathways. Bile acids (BAs), which act as critical signaling molecules in enterohepatic circulation, play an essential role in maintaining gastrointestinal homeostasis through bidirectional gut–liver axis communication. These molecules are increasingly recognized as pivotal regulators in the progression of both MASLD and IBD. While previous studies have characterized the dynamics of BA in blood or fecal samples under both conditions, a comprehensive understanding of their metabolic profiles and the associated interactions within the gut–liver axis is still lacking. This review synthesizes current evidence from studies employing BA metabolomics to investigate IBD and MASLD. By focusing on BA signatures, we summarize conserved alterations between these two conditions and their potential mechanisms of disease progression. Our review advances understanding of BA-mediated pathways in IBD and MASLD, providing a foundation for assessing their roles in contributing to the pathogenesis of MASLD in patients with IBD.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: To investigate the clinical efficacy of transurethral 450 nm blue laser vaporization of prostate (BVP) and transurethral plasmakinetic resection of the prostate (PKRP) in the treatment of frail elderly patients with benign prostatic hyperplasia (BPH). Methods: A retrospective analysis was conducted on the clinical data of 62 frail elderly BPH patients undergoing BVP (n=32) or PKRP (n=30) in our hospital during Jan.2023 and Jun.2024.The two groups were compared in terms of postoperative hemoglobin drop, operation time, hospital stay, catheter indwelling time, bladder irrigation time, preoperative and postoperative 3-month postvoid residual (PVR), maximum urinary flow rate (Qmax), international prostate symptom score (IPSS), quality of life score (QoL), and postoperative complications. Results: The postoperative hemoglobin drop was lower in the BVP group than in the PKRP group [(1.62±1.04) g/L vs.(7.37±2.37) g/L, P＜0.001].The operation time [(24.53±7.52) min vs. (47.77±11.12) min], hospital stay [(2.78±1.62) d vs. (8.13±0.82) d], catheter indwelling time [(1.84±0.99) d vs. (5.40±0.81) d], and bladder irrigation time [(7.37±2.35) h vs. (51.60±19.72) h] were significantly shorter in the BVP group than in the PKRP group (all P＜0.001).At 3 months postoperatively, both groups showed significant improvements in IPSS, QoL, Qmax, and PVR compared to preoperative levels (P＜0.05), but there were no significant differences between the two groups (P>0.05).The overall incidence of early postoperative complications in the BVP group was lower than that in PKRP group (18.75% vs. 43.33%, P＜0.05).After 3 months of follow-up, there was no significant difference in the incidence of complications between the BVP group and PKRP group(3.13% vs. 13.33%, P=0.14). Conclusion: BVP for the treatment of frail elderly BPH patients is safe and reliable, associated with minimal bleeding, short operation time, catheterization time and hospital stay, and there is no need to discontinue anticoagulant drugs.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

BACKGROUND: Disease-modifying therapies have been approved for the treatment of relapsing multiple sclerosis (RMS). The present study aims to examine the safety of teriflunomide in Chinese patients with RMS. METHODS: This non-randomized, multi-center, 24-week, prospective study enrolled RMS patients with variant (c.421C>A) or wild type ABCG2 who received once-daily oral teriflunomide 14 mg. The primary endpoint was the relationship between ABCG2 polymorphisms and teriflunomide exposure over 24 weeks. Safety was assessed over the 24-week treatment with teriflunomide. RESULTS: Eighty-two patients were assigned to variant ( n  = 42) and wild type groups ( n  = 40), respectively. Geometric mean and geometric standard deviation (SD) of pre-dose concentration (variant, 54.9 [38.0] μg/mL; wild type, 49.1 [32.0] μg/mL) and area under plasma concentration-time curve over a dosing interval (AUC tau ) (variant, 1731.3 [769.0] μg∙h/mL; wild type, 1564.5 [1053.0] μg∙h/mL) values at steady state were approximately similar between the two groups. Safety profile was similar and well tolerated across variant and wild type groups in terms of rates of treatment emergent adverse events (TEAE), treatment-related TEAE, grade ≥3 TEAE, and serious adverse events (AEs). No new specific safety concerns or deaths were reported in the study. CONCLUSION: ABCG2 polymorphisms did not affect the steady-state exposure of teriflunomide, suggesting a similar efficacy and safety profile between variant and wild type RMS patients. REGISTRATION NCT04410965, https://clinicaltrials.gov .
Humans ; Crotonates/adverse effects* ; Toluidines/adverse effects* ; Nitriles ; Hydroxybutyrates ; Female ; Male ; Adult ; ATP Binding Cassette Transporter, Subfamily G, Member 2/genetics* ; Middle Aged ; Multiple Sclerosis, Relapsing-Remitting/genetics* ; Prospective Studies ; Young Adult ; Neoplasm Proteins/genetics* ; East Asian People

Polygonati Rhizoma demonstrates significant potential for addressing both chronic and hidden hunger. The supply of high-quality seedlings is a primary factor influencing the development of the Polygonati Rhizoma industry. Warm water soaking is often used in agriculture to promote the rapid germination of seeds, while its application and molecular mechanism in Polygonati Rhizoma have not been reported. To rapidly obtain high-quality seedlings, this study treated Polygonatum kingianum var. grandifolium seeds with sand storage at low temperatures, warm water soaking, and cultivation temperature gradients. The results showed that the culture at 25 ℃ or sand storage at 4 ℃ for 2 months rapidly broke the seed dormancy of P. kingianum var. grandifolium, while the culture at 20 ℃ or sand storage at 4 ℃ for 1 month failed to break the seed dormancy. Soaking seeds in 60 ℃ warm water further increased the germination rate, germination potential, and germination index. Specifically, the seeds soaked at 60 ℃ and cultured at 25 ℃ without sand storage treatment(Aa25) achieved a germination rate of 78. 67%±1. 53% on day 42 and 83. 40%±4. 63% on day 77. The seeds pretreated with sand storage at 4 ℃ for 2 months, soaked in 60 ℃ water, and then cultured at 25 ℃ achieved a germination rate comparable to that of Aa25 on day 77. Transcriptomic analysis indicated that warm water soaking might promote germination by triggering reactive oxygen species( ROS), inducing the expression of heat shock factors( HSFs) and heat shock proteins( HSPs), which accelerated DNA replication, transcript maturation, translation, and processing, thereby facilitating the accumulation and turnover of genetic materials. According to the results of indoor controlled experiments and field practices, maintaining a germination and seedling cultivation environment at approximately 25 ℃ was crucial for the one-year seedling cultivation of P. kingianum var. grandifolium.
Germination ; Seedlings/genetics* ; Water/metabolism* ; Seeds/metabolism* ; Polygonatum/genetics* ; Temperature ; Plant Proteins/genetics* ; Plant Dormancy