OBJECTIVE To investigate the effects of baicalin （BC） on insulin resistance in rats with gestational diabetes mellitus （GDM） and its underlying mechanism based on the adenosine monophosphate-activated protein kinase （AMPK）/suppressor of variegation 3-9 homolog 1 （SUV39H1）/histone H3 lysine 9 trimethylation （H3K9me3） axis. METHODS A GDM rat model was established by a combination of a high-fat diet and streptozotocin injection. The successfully modeled rats were divided into the GDM group， BC low-dose group， BC high-dose group， and high-dose of BC+AMPK inhibitor （Compound C） group， with 10 rats in each group. Another 10 pregnant rats fed a normal diet served as the control group. Rats in each group were given corresponding drugs/normal saline intragastrically and/or intraperitoneally， once daily for 2 consecutive weeks. After the last administration， the levels of fasting blood glucose （FBG）， pancreatic function indexes [fasting insulin （FINS）， homeostasis model assessment of insulin resistance （HOMA-IR）， insulin sensitivity index （ISI）]， blood lipid indexes （total cholesterol， triglyceride， low-density lipoprotein cholesterol）， liver function indexes （alanine transferase， aspartate transferase， alkaline phosphatase）， inflammatory indicators （C-reactive protein， interleukin-1β， interleukin-6）， metabolic regulatory protein [complement-C1q/tumor necrosis factor-related protein 3 （CTRP3）]， insulin sensitivity related factors [glucose transporter 4 （GLUT4）， adiponectin]， and oxidative stress indicators [superoxide dismutase （SOD）， catalase （CAT）， malondialdehyde （MDA）] were measured. Pathological changes in liver tissue were observed， and the expressions of proteins related to the AMPK/SUV39H1/H3K9me3 axis in liver tissue were detected. RESULTS Compared with the GDM group， rats in the BC low- and high-dose groups showed varying degrees of improvement in pathological changes such as disordered cell arrangement， vacuolar degeneration， lipid deposition， and inflammatory cell infiltration in liver tissue. Their FBG and FINS levels， HOMA-IR， the levels of blood lipid indexes， liver function indexes， inflammatory indicators and MDA， and the expressions of SUV39H1 and H3K9me3 were significantly decreased or down-regulated， while metabolic regulatory protein， insulin sensitivity-related factors and AMPK protein phosphorylation levels were significantly increased （ P ＜0.05）. The improvement was more significant in the BC high-dose group （ P ＜0.05）. Compound C could significantly reverse the ameliorative effects of high-dose BC on the above quantitative indicators （ P ＜0.05）. CONCLUSIONS BC can significantly reduce oxidative stress and inflammatory responses， increase serum levels of CTRP3， GLUT4 and adiponectin， thereby improving insulin resistance in GDM rats. These effects may be related to the activation of AMPK and inhibition of SUV39H1-mediated H3K9me3 modification.

Objective:To investigate the short-term clinical efficacy of implantation with a 3D-printed microporous titanium prosthesis in the treatment of large segmental infectious tibial defects.Methods:A retrospective analysis was conducted of the electronic medical records of the 47 patients with large segmental tibial defects who had been treated with 3D-printed microporous titanium prostheses at Department of Orthopaedics, 920th Hospital of Joint Logistics Support Force from January 2019 to February 2024. The cohort included 36 males and 11 females, with an age of (46.2±11.8) years and a mean bone defect length of 12.3 (8.0, 16.8) cm. In the 19 patients complicated with soft tissue defects, the area of soft tissue defects ranged from 10.0 cm × 6.0 cm to 33.0 cm × 10.0 cm. For the 28 patients without soft tissue defects at the lower leg, the bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage; for the 19 patients complicated with soft tissue defects, the soft tissue defects at the lower limb were repaired using an anterolateral thigh flap with vascular anastomosis at the same time when bone defects were filled with vancomycin-loaded calcium sulfate bone cement at the first stage. After infection control at 2 to 8 months after surgery, individualized 3D-printed microporous titanium prostheses were implanted at the second stage to reconstruct the bone defects. Postoperative observations included the patients' first standing time, crutch walking time, full weight-bearing time, osseointegration of the tibial fracture and the prosthesis, and complications during follow-up.Results:The follow-up period for the 47 patients was (34.7±14.3) months. The first standing time was (2.2±0.6) months, crutch walking time (3.8±1.1) months, and full weight-bearing time (5.3±1.2) for this cohort. The evaluation by the Paley's bone healing score resulted in 25 excellent cases, 18 good cases, 1 medium case, and 3 poor cases, giving an excellent and good rate of 91.5% (43/47). One year after operation, the X-ray films showed that the tibial fractures and prostheses were well integrated in the 43 patients. Two patients developed recurrent tibial infection which was responded to replacement of the vancomycin-loaded calcium sulfate spacer. The fixation screws for tibial prosthesis were broken in one patient, but no recurrence of infection was observed after revision. The overall incidence of complications was 6.4% (3/47).Conclusion:In the treatment of large segmental infectious tibial defects, by facilitating rapid functional recovery and ensuring a low incidence of complications, implantation with a 3D-printed microporous titanium prosthesis demonstrates fine short-term clinical efficacy.

This research investigated the contamination level,distribution of drug-resistant strains,and molecular epidemiologi-cal characteristics of Campylobacter,and further explored transmission pathways and prevention strategies.Cecum,chicken carcass,chicken product,and environmental samples,as well as swabs from workers'hands,were collected from a slaughterhouse in a large broiler group in the Jiaodong area between August 2023 and July 2024.Quantitative contamination assessment of Campylobacter in chicken carcasses and chicken products was performed.After microbial mass spectrometry identification,the representative strains of different links were selected for drug resistance testing and whole genome sequencing(WGS).On the basis of the sequencing results,the resistance genes,virulence genes,multilocus sequence typing(MLST),and phylogenetic characteristics of representative strains were analyzed.Homology comparisons were performed between isolates and strains from patients with diarrhea in the NCBI database.A total of 297 Campylobacter strains were isolated from 806 samples,and the overall detection rate was 36.85%.The detection rate of Campylobacter was highest in the evisceration process(47.33%),followed by the cutting process(35.64%).Overall,the Campylo-bacter detection rate first increased,then decreased,and subsequently increased.Drug sensitivity testing revealed that 90 isolates were resistant to nalidixic acid and ciprofloxacin,and 94.97%of isolates were resistant to tetracycline.WGS showed that both Campylo-bacter jejuni(C.jejuni)and Campylobacter coli(C.coli)carried many drug resistance and virulence genes.ST-14176 of C.jejuni was isolated for the first time herein.The predominant ST-8261 strain of C.jejuni and ST-860,ST-829,and ST-1586 strains of C.coli are known to cause human diarrhea.LOS expression genes associated with Guillain-Barré syndrome(GBS)were detected in both C.jejuni isolates from the slaughter chain and patients with GBS.Some strains exhibited close genetic relatedness to human-derived Campylo-bacter strains from the NCBI database.The detection rate of Campylobacter in the slaughterhouse first increased,then decreased,and subsequently increased,and the quantitative contamination level of each link was similar to the detection rate.Quantitative analysis of chicken carcasses/products revealed that the average bacterial load was highest in eviscerated carcasses(102.80 cfu/g),and the high-est amount of Campylobacter in chicken products reached 451.80 cfu/g.Abundant drug resistance genes and virulence genes were iden-tified,and the drug resistance genes were highly correlated with the drug resistance rate.Therefore,surveillance intensity and control measures for Campylobacter in slaughter processes should be strengthened.

Abelmoschi Corolla, the dried corolla of Abelmoschus manihot, has anti-inflammatory, antioxidant, and anti-fibrosis activities. Its chemical constituents mainly include flavonoids, organic acids, steroids, and polysaccharides. This study reviewed the research progress in the chemical constituents and pharmacological activities of Abelmoschi Corolla in recent 20 years. According to the concept of quality marker(Q-marker), the Q-markers of Abelmoschi Corolla were predicted from plant phylogeny, chemical constituent specificity, traditional efficacy, chemical constituent measurability, and absorbed constituents. The primary Q-markers for Abelmoschi Corolla were anticipated to include quercetin-3'-O-β-D-glucopyranoside, gossypetin-8-O-β-D-glucuronide, isoquercetin, myricetin,quercetin, and hyperoside, with the aim of providing reference data for improving the quality evaluation system of Abelmoschi Corolla.
Abelmoschus/chemistry* ; Drugs, Chinese Herbal/pharmacology* ; Flowers/chemistry* ; Humans ; Animals ; Quality Control ; Flavonoids/chemistry*

Microbial detection and control of traditional Chinese medicine(TCM) decoction pieces are crucial for the quality control of TCM preparations. It is also a key area of research in the measurement technology and equipment development for TCM manufacturing. Guided by TCM manufacturing measurement methodologies, this study presented a design of a novel portable microbial detection device, using Atractylodis Macrocephalae Rhizoma decoction pieces as a demonstration. Immunomagnetic separation technology was employed for specific isolation and labeling of target microorganisms. Enzymatic signal amplification was utilized to convert weak biological signals into colorimetric signals, constructing an optical biosensor. A self-developed smartphone APP was further applied to analyze the colorimetric signals and quantify target concentrations. A portable and automated detection system based on Arduino microcontroller was developed to automatically perform target microbial separation/extraction, as well as mimetic enzyme labeling and catalytic reactions. The developed equipment specifically focuses on the rapid and quantitative microbial analysis of TCM active pharmaceutical ingredients, intermediates in TCM manufacturing, and final TCM products. Experimental results demonstrate that the equipment could detect Salmonella in samples within 2 h, with a detection limit as low as 5.1 × 10~3 CFU·mL~(-1). The equipment enables the rapid detection of microorganisms in TCM decoction pieces, providing a potential technical solution for on-site rapid screening of microbial contamination indicators in TCM. It has broad application prospects in measurement technology for TCM manufacturing and offers strong technical support for the modernization, industrialization, and intelligent development of TCM.
Drugs, Chinese Herbal/analysis* ; Atractylodes/microbiology* ; Rhizome/microbiology* ; Biosensing Techniques/methods* ; Medicine, Chinese Traditional ; Colorimetry/instrumentation* ; Quality Control

OBJECTIVE: To analyze the effectiveness of single three-dimensional (3D)-printed microporous titanium prostheses and flap combined prostheses implantation in the treatment of large segmental infectious bone defects in limbs. METHODS: A retrospective analysis was conducted on the clinical data of 76 patients with large segmental infectious bone defects in limbs who were treated between January 2019 and February 2024 and met the selection criteria. Among them, 51 were male and 25 were female, with an age of (47.7±9.4) years. Of the 76 patients, 51 had no soft tissue defects (single prostheses group), while 25 had associated soft tissue defects (flap combined group). The single prostheses group included 28 cases of tibial bone defects, 11 cases of femoral defects, 5 cases of humeral defects, 4 cases of radial bone defects, and 3 cases of metacarpal, or carpal bone defects, with bone defect length ranging from 3.5 to 28.0 cm. The flap combined group included 3 cases of extensive dorsum of foot soft tissue defects combined with large segmental metatarsal bone defects, 19 cases of lower leg soft tissue defects combined with large segmental tibial bone defects, and 3 cases of hand and forearm soft tissue defects combined with metacarpal, carpal, or radial bone defects, with bone defect length ranging from 3.8 to 32.0 cm and soft tissue defect areas ranging from 8 cm×5 cm to 33 cm×10 cm. In the first stage, vancomycin-loaded bone cement was used to control infection, and flap repair was performed in the flap combined group. In the second stage, 3D-printed microporous titanium prostheses were implanted. Postoperative assessments were performed to evaluate infection control and bone integration, and pain release was evaluated using the visual analogue scale (VAS) score. RESULTS: All patients were followed up postoperatively, with an average follow-up time of (35.2±13.4) months. In the 61 lower limb injury patients, the time of standing, walk with crutches, and fully bear weight were (2.2±0.6), (3.9±1.1), and (5.4±1.1) months, respectively. The VAS score at 1 year postoperatively was significantly lower than preoperative one ( t=-10.678, P<0.001). At 1 year postoperatively, 69 patients (90.8%) showed no complication such as infection, fracture, prosthesis displacement, or breakage, and X-ray films indicated good integration at the prosthesis-bone interface. According to the Paley scoring system for the healing of infectious bone defects, the results were excellent in 37 cases, good in 29 cases, fair in 3 cases, and poor in 7 cases. In the single prostheses group, during the follow-up, there was 1 case each of femoral prostheses fracture, femoral infection, and tibial infection, with a treatment success rate of 94.1% (48/51). In lower limb injury patients, the time of fully bear weight was (5.0±1.0) months. In the flap combined group, during the follow-up, 1 case of tibial fixation prostheses screw fracture occurred, along with 2 cases of recurrent foot infection in diabetic patients and 1 case of tibial infection. The treatment success rate was 84.0% (21/25). The time of fully bear weight in lower limb injury patients was (5.8±1.2) months. The overall infection eradication rate for all patients was 93.4% (71/76). CONCLUSION The use of 3D-printed microporous titanium prostheses, either alone or in combination with flaps, for the treatment of large segmental infectious bone defects in the limbs results in good effectiveness with a low incidence of complications. It is a feasible strategy for the reconstruction of infectious bone defects.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Titanium ; Retrospective Studies ; Surgical Flaps ; Adult ; Prosthesis Implantation/methods* ; Plastic Surgery Procedures/methods* ; Treatment Outcome ; Prostheses and Implants ; Bone Diseases, Infectious/surgery* ; Extremities/surgery* ; Prosthesis Design

OBJECTIVES: To investigate the effects of methylenetetrahydrofolate reductase (MTHFR) rs1801133 and γ-glutamyl hydrolase (GGH) rs11545078 gene polymorphisms on plasma concentrations and toxicity following high-dose methotrexate (MTX) therapy in children with acute lymphoblastic leukemia (ALL). METHODS: Children with ALL treated at the Xuzhou Children's Hospital of Xuzhou Medical University from January 2021 to April 2024 were selected for this study. Genotypes of MTHFR rs1801133 and GGH rs11545078 were determined using multiplex polymerase chain reaction. MTX plasma concentrations were measured by enzyme-multiplied immunoassay technique, and toxicity was graded according to the Common Terminology Criteria for Adverse Events version 5.0. The relationships between MTHFR rs1801133 and GGH rs11545078 genotypes and both MTX plasma concentrations and associated toxicities were analyzed. RESULTS: In the low-risk ALL group, the MTHFR rs1801133 genotype was associated with increased MTX plasma concentrations at 72 hours (P<0.05). In the intermediate- to high-risk group, the MTHFR rs1801133 genotype was associated with increased MTX plasma concentrations at 48 hours (P<0.05), and the GGH rs11545078 genotype was associated with increased MTX plasma concentrations at 48 hours (P<0.05). In the intermediate- to high-risk group, the MTHFR rs1801133 genotype was associated with the occurrence of reduced hemoglobin (P<0.05), and the GGH rs11545078 genotype was associated with the occurrence of thrombocytopenia (P<0.05). CONCLUSIONS Detection of MTHFR rs1801133 and GGH rs11545078 genotypes can be used to predict increased MTX plasma concentrations and the occurrence of toxic reactions in high-dose MTX treatment of ALL, enabling timely interventions to enhance safety.
Humans ; Methotrexate/toxicity* ; Methylenetetrahydrofolate Reductase (NADPH2)/genetics* ; Precursor Cell Lymphoblastic Leukemia-Lymphoma/blood* ; Male ; Female ; Child ; Child, Preschool ; gamma-Glutamyl Hydrolase/genetics* ; Antimetabolites, Antineoplastic/adverse effects* ; Infant ; Polymorphism, Genetic ; Adolescent ; Genotype ; Polymorphism, Single Nucleotide

OBJECTIVES: To study the effect of prophylactic phenytoin (PHT) or levetiracetam (LEV) on busulfan (BU) blood concentration in children undergoing hematopoietic stem cell transplantation. METHODS: Pediatric patients conditioned with BU plus cyclophosphamide and fludarabine at the First People's Hospital of Chenzhou from September 2023 to February 2025 were retrospectively included. Patients were grouped by prophylactic antiepileptic regimen into PHT (n=24) and LEV (n=26). BU blood concentrations at the end of infusion (0 hour) and at 1, 2, and 4 hours post-infusion were compared between groups. RESULTS: At 0 hour post-infusion, BU blood concentrations did not differ significantly between groups (P>0.05). At 1, 2, and 4 hours post-infusion, BU blood concentrations were higher in the LEV group than in the PHT group (P<0.05). The area under the concentration-time curve from 0 to ∞ (AUC_0-∞) was greater in the LEV group (P<0.001), and the attainment rate of AUC_0-∞ was higher in the LEV group than in the PHT group (73% vs 21%, P<0.001). No significant differences were observed between groups in time to hematopoietic engraftment or in the incidence of BU-related adverse drug reactions (P>0.05). CONCLUSIONS Compared with PHT, LEV prophylaxis is associated with higher BU blood concentration and a higher AUC_0-∞ attainment rate. There is no observed difference in BU efficacy or safety between PHT and LEV.
Humans ; Levetiracetam/therapeutic use* ; Busulfan/pharmacokinetics* ; Hematopoietic Stem Cell Transplantation ; Male ; Female ; Child ; Child, Preschool ; Phenytoin/pharmacology* ; Infant ; Retrospective Studies ; Anticonvulsants/pharmacology* ; Adolescent