In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

ObjectiveTo compare the clinical efficacy of traditional Chinese medicine （TCM） manipulative reduction combined with small splint fixation versus surgical treatment for type A distal radius fracture （DRF） and to explore the factors influencing the choice of treatment. MethodsA multi-center retrospective study was conducted， collecting data from 1237 type A DRF patients treated in 11 hospitals in Jiangsu province from September， 2023 to April， 2025. Among them， 851 patients in the TCM group received manipulative reduction combined with small splint fixation， and 386 patients in the surgical group underwent open reduction and internal fixation. Visual analog scale （VAS） scores for pain and radiographic indicators including palmar tilt， ulnar deviation， and radial height were compared before treatment， 5-7 days after treatment， and 4-6 weeks after treatment. The wrist joint function scores including Dienst and Gartland-Werley scores at 12 weeks after treatment were recorded. Subgroup analysis was conducted for the excellent rate of Dienst and Gartland-Werley scores， stratified by age （＜50， 50-59， 60-69， ≥70 years old） and AO subtypes （A1， A2， A3）. A multivariate logistic regression model was used to identify independent factors influencing treatment choice. ResultsOn 5-7 days after treatment， the surgical group had lower VAS scores than the TCM group， while 4-6 weeks after treatment， the TCM group showed lower VAS scores than the surgical group （P＜0.01）. In terms of radiographic indicators， except for the palmar tilt before treatment being higher in the surgical group than in the TCM group （P＜0.01）， there were no significant differences in palmar tilt， ulnar deviation， and radial height at other timepoints （P＞0.05）. Twelve weeks after treatment， the surgical group had a higher average Gartland-Werley score and the excellent rate than the TCM group （P＜0.01）. Subgroup analysis showed that in patients with A2 type DRF aged 50-59 and 60-69 years old， the excellent rates of Dienst and Gartland-Werley scores in the TCM group were higher than those in the surgical group （P＜0.05）. Multivariate logistic regression analysis revealed that age， palmar tilt， ulnar deviation， and the degree of swelling on the affected side were independent factors influencing the choice of treatment （P＜0.05）. ConclusionBoth TCM manipulative reduction combined with small splint fixation and surgical treatment for type A DRF can achieve good therapeutic effects. TCM manipulative reduction combined with small splint fixation has certain advantages in medium- and long-term pain relief， especially in elderly patients， where wrist joint function recovery is more stable. Age， palmar tilt， ulnar deviation， and swelling degree are the main factors influencing the treatment choice.

ObjectiveTo observe the clinical efficacy and radiographic outcomes of manipulative reduction combined with small splint fixation in the treatment of distal radius fractures. MethodsThe clinical data of 1051 patients with distal radius fractures were retrospectively collected from five hospitals included in the Jiangsu Diagnosis and Treatment Data Platform for Traditional Chinese Medicine（TCM） Dominant Diseases. Propensity score matching at a 1∶4 ratio was applied， resulting in 580 cases selected for final analysis， which comprised 448 patients in the TCM group（manipulative reduction plus small splint fixation） and 132 in the surgical treatment group（open reduction and internal fixation）. Each group was further stratified into type A， B， and C subgroups based on AO fracture classification. Radiographic indicators including palmar tilt， radial inclination， and radial height were compared between groups before treatment and 1 day， 1 week， and 4-6 weeks after treatment， and pain visual analog scale（VAS） scores before treatment and 1 week and 4-6 weeks after treatment were also compared. Wrist joint function was assessed 12 weeks after treatment， using the Dienst wrist function score and the Gartland and Werley（G-W） wrist function score. Additionally， the radiographic indicators at different timepoints and the 12-week wrist function levels were compared between groups across different fracture types. ResultsNo statistically significant difference was observed in radiographic indicators and VAS scores at all timepoints before and after treatment， as well as wrist joint function grades assessed by the Dienst score and the G-W score at 12 weeks after treatment （P＞0.05）. Compared to those before treatment， both groups showed increased palmar tilt， radial inclination， and radial height 1 week and 4-6 weeks after treatment， and decreased VAS scores （P＜0.05）. Compared to those 1 week after treatment， both groups showed a decrease in palmar tilt， an increase in radial inclination and radial height， and a reduction in VAS score 4-6 weeks after treatment（P＜0.05）. In type A and B subgroups， the surgical treatment group had a higher radial inclination than the TCM group 4-6 weeks after treatment， while in the type C subgroup， a higher radial height was shown in the surgical treatment group than in the TCM group 4-6 weeks after treatment（P＜0.05）. In type C subgroup， there was significant difference between groups in the wrist joint function by G-W scores 12 weeks after treatment（P＜0.05）. ConclusionManipulative reduction combined with small splint fixation can maintain fracture alignment and alleviate pain in treating distal radius fractures， which achieves therapeutic outcomes comparable to surgical treatment. It is particularly suitable for type A and B fractures and can be considered an effective treatment option for distal radius fractures.

ObjectiveTo construct an automatic measurement model for palmar tilt and radial inclination suitable for traditional Chinese medicine （TCM） clinical scenarios， and to validate its accuracy and efficiency in TCM manipulative reduction settings. MethodsData on anteroposterior （AP） and lateral X-rays of distal radius fractures were collected from patients admitted to 18 TCM/ integrated TCM and western medicine hospitals in Jiangsu province between September 1st， 2023， and September 1st， 2024， via the Jiangsu Diagnosis and Treatment Big Data Platform for TCM Dominant Diseases. A medical image segmentation framework based on multi-scale feature fusion and edge-awareness was employed， combined with anatomical knowledge specific to TCM orthopedics， to optimize the feature extraction strategy of an artificial intelligence （AI） model. This framework enabled automatic segmentation of fracture regions and measurement of distal radius palmar tilt and radial inclination. The accuracy of the AI model in measuring radial inclination and volar tilt was validated， and the measurement time and average time gain rate of the AI model were compared to those of manual measurement. ResultsA total of 15,444 AP and lateral X-ray images of distal radius fractures were collected， and were divided into a training set （11,144 images， 5066 AP and 6078 lateral）， a validation set （3700 images， 1840 AP and 1860 lateral）， and an independent test set （600 images， 300 AP and 300 lateral） after preprocessing. In the measurement of 300 AP X-rays in the independent test set for radial inclination， when the degree error between AI measurement and manual measurement was ＜3° and ＜5°， AI measurement accuracy was 83% and 93%， respectively. In 300 lateral X-rays in the test set for palmar tilt， when AI measurements had an error of ＜3° and ＜5° compared to manual measurements， corresponding accuracy rate was 78% and 90%， respectively. For 50 X-ray images， AI measurement time was （1.37±0.05） min for radial inclination while manual measurement time was （22.57±2.52） min （P＜0.001）； in terms of palmar tilt， the AI measurement time was （1.33±0.14） min， shorter than （23.70±2.80） min for manual measurement time （P＜0.001）. Average time gain rates for manual and AI measurements were 93.93% and 94.39% respectively. ConclusionAn automatic measurement model for palmar tilt and radial inclination in distal radius fractures has been established， enabling more accurate and efficient assessment as well as providing a tool to support the quantitative evaluation of the efficacy of TCM manipulative reduction and large-sample clinical research.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Sesquiterpenes are natural terpenes containing 15 carbon atoms. They are widely used in the perfume, pharmaceutical, and biofuel industries due to their remarkable biological activities. The traditional production of sesquiterpenes relies on chemical synthesis or plant extraction, which has the disadvantages of low yields and waste of resources. The construction of microbial cell factories for the efficient synthesis of sesquiterpenes by means of synthetic biology provides a new option. In recent years, with the development of metabolic engineering and synthetic biology, the heterologous synthesis of a variety of sesquiterpenes has been successfully achieved by metabolic engineering of the oleaginous yeast, Yarrowia lipolytica. In this paper, we review the research progress in the heterologous synthesis of different sesquiterpenes by Y. lipolytica, discuss the synthetic biology strategies commonly used in this field, and make an outlook on the research directions and engineering approaches to further enhance the sesquiterpene yield in this host. This paper provides a reference for strategies such as synergistic optimization of synthetic biology and metabolic engineering, enhanced precursors, and opens up new directions for the application of synthetic biology in green chemistry and sustainable production.
Yarrowia/genetics* ; Sesquiterpenes/metabolism* ; Metabolic Engineering/methods* ; Synthetic Biology/methods*

By systematically combing ancient and modern literature， this paper examined Tribuli Fructus and Astragali Complanati Semen（ACS） used in the famous classical formulas from the aspects of name， origin， production area， harvesting and processing， clinical efficacy， so as to provide a basis for the development of famous classical formulas containing such medicinal materials. The results showed that the names of Tribuli Fructus in the past dynasties were mostly derived from its morphology， and there were nicknames such as Baijili， Cijili and Dujili. The name of ACS in the past dynasties were mostly originated from its production areas， and there were nicknames such as Baijili， Shayuan Jili and Tongjili. Because both of them had the name of Baijili， confusion began to appear in the Song dynasty. In ancient and modern times， the main origin of Tribuli Fructus were Tribulus terrestris， and ancient literature recorded the genuine producing areas of Tribuli Fructus was Dali in Shaanxi and Tianshui in Gansu， but today it is mainly cultivated in Anhui and Shandong. The fruit is the medicinal part， harvested in autumn throughout history. There is no description of the quality of Tribuli Fructus in ancient times， and the plump， firm texture， grayish-white color is the best in modern times. Traditional processing methods for Tribuli Fructus included stir-frying and wine processing， while modern commonly used is purified， fried and salt-processed. The ancient records of Tribuli Fructus were spicy， bitter， and warm in nature， with modern research adding that it is slightly toxic. The main effects of ancient and modern times include treating wind disorders， improving vision， promoting muscle growth， and treating vitiligo. The mainstream base of ACS used throughout history is Astragalus complanatus. Ancient texts indicated ACS primarily originated from Shaanxi province. Today， the finest varieties come from Tongguan and Dali in Shaanxi. The medicinal part is the seed， traditionally harvested in autumn. Modern harvesting occurs in late autumn or early winter， followed by sun-drying. Ancient texts valued seeds with a fragrant aroma as superior， while modern standards prioritize plump， uniform and free of impurities. Traditional processing methods for ACS included frying until blackened and wine-frying， while modern practice commonly employs purification methods. In terms of medicinal properties， the ancient and modern records are sweet and warm in nature. Due to originally classified under Tribuli Fructus， its effects were thus regarded as equivalent to those of Tribuli Fructus， serving as the medicine for treating wind disorders， additional functions included tonifying the kidneys and treating vitiligo. The present record of its efficacy is to tonify the kidney and promote Yang， solidify sperm and reduce urine， nourish the liver and brighten the eye， etc. Based on the textual research results， it is suggested that when developing the famous classical formulas of Tribuli Fructus medicinal materials， we should pay attention to the specific reference object of Baijili， T. terrestris and A. complanatus should be identified and selected， and the processing method should be in accordance with the requirements of the formulas.

Traditional Chinese medicine(TCM) resources are the essential material foundation for the development of TCM. The national survey of TCM resources serves as a periodic summary of these resources, ensuring the continuity, prosperity, and development of TCM in China. Since 1949, four national surveys of TCM resources have been conducted. The fourth survey incorporated an investigation into traditional knowledge related to TCM resources, including the traditional medicinal knowledge of Chinese ethnic minorities, with the goal of systematically exploring, preserving, and inheriting this knowledge. This manuscript provides an overview of the basic findings from the first three national surveys of TCM resources, while also clarifying the concepts, categories, forms, carriers, and acquisition pathways of traditional knowledge related to TCM resources. A preliminary summary of the findings from traditional knowledge investigations reported in current literature is also presented. Based on the fourth survey, this manuscript emphasizes the urgency of developing public medical knowledge through empirically-based investigations, the excavation, and compilation of traditional knowledge. It also outlines the potential for conducting "precise" investigations based on first-hand data obtained from the survey, as well as facilitating the discovery and evaluation of new medicines using traditional knowledge related to ethnic minority medicinal practices. This manuscript is expected to provide valuable insights for promoting the health and industrial development of ethnic minority populations in the post-"survey" phase.
Humans ; Medicine, Chinese Traditional ; China/ethnology* ; Minority Groups ; Ethnicity ; Drugs, Chinese Herbal/therapeutic use* ; Health Knowledge, Attitudes, Practice/ethnology* ; Surveys and Questionnaires

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child