In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Guided by the theory of "fire and original qi are restricted"， it is believed that original qi depletion is the root of the cutaneous immune-related adverse events （cirAEs） related to immune checkpoint inhibitors （ICIs）， and the yin fire exuberance is the branch. Among them， original qi depletion is the internal foundation of the disease， while the drug toxicity of ICIs harming original qi is the initiating factor， and exuberant yin fire is the key pathogenesis. In clinical practice， the general treatment principle advocates banking up original qi to consolidate the root and draining fire to raise yang. Buzhong Yiqi Decoction （补中益气汤） can be used to activate transportation of middle jiao （焦） and promote ascent and dispersion of clear yang， thereby restoring the balance of qi and fire， and medicinals such as Huangqin （Radix Scutellariae）， Huanglian （Rhizoma Coptidis） and Huangbai （Cortex Phellodendri Chinensis） can be supplementetd to clear and drain yin fire. At the same time， considering the accompanying symptoms such as dampness-stasis and fluids depletion， the methods of removing dampness and dispelling stasis， supplementing blood and nourishing yin should be added flexibly. This approach can provide a new perspective and treatment strategy for reducing ICIs-related cirAEs in malignant tumors.

Objective To analyze the epidemiological characteristics and spatiotemporal clustering of varicella in Lu'an City from 2005 to 2023, and to provide a scientific basis for optimizing varicella prevention and control strategies. Methods Data on varicella cases were collected through the Chinese Center for Disease Control and Prevention Information System. Descriptive epidemiology, temporal trend analysis, seasonal analysis, spatiotemporal clustering analysis, and spatial autocorrelation analysis were conducted using QGIS, JoinPoint, SaTScan and GeoDa software. Results The average annual reported incidence rate of varicella in Lu'an City from 2005 to 2023 was 34.55/100,000, showing a trend of initial increase followed by a decrease. The peak incidence occurred from October to January of the following year (RR=1.97, LLR=1743.95, P=0.001). Students aged 0 to 19 was the primary affected group. Spatiotemporal scan analysis revealed four types of spatiotemporal clusters, with the cluster in Jin'an District from October 2017 to December 2023 being particularly prominent (RR=2.87，LLR=1734.15，P<0.001). Spatial autocorrelation analysis indicated significant clustering of varicella cases in the main urban area (Moran's I=0.216，Z=4.786，P=0.003). Conclusion The incidence of varicella in Lu'an City exhibits distinct seasonal and spatial clustering, and schools and kindergartens in the main urban area are the key to varicella prevention and control. It is necessary to enhance the monitoring of disease outbreaks during peak periods and in key areas, and to increase the two-dose vaccination rate for varicella in areas with case aggregation and among key populations.

The interactions between microorganisms and medicinal plants are crucial to the quality improvement of medicinal plants. Medicinal plants attract microorganisms to colonize by secreting specific compounds and provide niche and nutrient support for these microorganisms, with a symbiotic network formed. These microorganisms grow in the rhizosphere, phyllosphere, and endophytic tissues of plants and significantly improve the growth performance and medicinal component accumulation of medicinal plants by promoting nutrient uptake, enhancing disease resistance, and regulating the synthesis of secondary metabolites. Microorganisms are also widely used in the ecological planting of medicinal plants, and the growth conditions of medicinal plants are optimized by simulating the microbial effects in the natural environment. The interactions between microorganisms and medicinal plants not only significantly improve the yield and quality of medicinal plants but also enhance their geoherbalism, which is in line with the concept of green agriculture and eco-friendly development. This study reviewed the research results on the interactions between medicinal plants and microorganisms in recent years and focused on the analysis of the great potential of microorganisms in optimizing the growth environment of medicinal plants, regulating the accumulation of secondary metabolites, inducing systemic resistance, and promoting the ecological planting of medicinal plants. It provides a scientific basis for the research on the interactions between medicinal plants and microorganisms, the research and development of microbial agents, and the application of microorganisms in the ecological planting of medicinal plants and is of great significance for the quality improvement of medicinal plants and the green and sustainable development of TCM resources.
Plants, Medicinal/metabolism* ; Bacteria/genetics* ; Symbiosis

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Objective To compare the accuracy differences of three-dimensional reconstruction of zygomatic-maxillary complex using cone beam computed tomography(CBCT)and multi-slice spiral computed tomography(MSCT)in the parameters related to zygomatic implantation.Methods Five adult skull specimens(10 zygomatic-maxillary complexes in total)were selected.According to the clinical application characteristics of zygomatic implantation,the parameter location for each skull specimen was conducted,and then CBCT and MSCT were used for scanning and three-dimensional reconstruction.Four parameters were measured on both skull specimens and reconstructed models:the thickness of the maxillary zygomatic process at the intersection of the zygomatic implant path and zygomaticomaxil-lary suture(LB-B1),the thickness of the zygomatic bone at the intersection of the zygomatic implant path and the midpoint of the zygomatic bone surface(LC-C1),the width of the alveolar ridge between the second premolar and the first molar(LAR),and the buccolingual width of the first molar(LM).The specimen group was measured by electronic vernier caliper,and the CBCT group and MSCT group were measured based on CBCT and MSCT.The absolute and relative errors of these four parameters were calculated,and the accuracy of the CBCT and MSCT three-dimensional reconstruction models were analyzed.Results All parameters demonstrated excellent measurement reliability and repeatability,with intra-class correlation coefficient(ICC)≥0.90.The measurement results of each parameter in the CBCT group and the MSCT group showed statistically significant differences compared with those in the specimen group(P<0.05).The measurement result of LM in the CBCT group was smaller than that in the MSCT group,and the difference was statistically significant(P<0.05).However,the measurement results of LB-B1,LC-C1 and LAR in the CBCT group showed no statistically significant difference compared with those in the MSCT group(P>0.05).The mean absolute error and relative error of the LM measurement results to the specimen group in the CBCT group were both smaller than those in the MSCT group,and the differences were statistically significant(P<0.05).There was no statistically significant difference in the mean absolute error or relative error of the LB-B1,LC-C1 and LAR measurement results to the specimen group between the CBCT group and the MSCT group(P>0.05).Conclusion CBCT and MSCT demonstrat comparable accuracy in three-dimensional reconstruction of the zygomatic-maxillary complex.However,CBCT exhibits superior accuracy for fine structures such as dental tissues,which is recommended as the primary choice for imaging data acquisition in zygomatic implantation.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.