Purpose: Overactive bladder (OAB) symptoms may improve following surgical correction of cystocele. This study aimed to evaluate changes in urgency, the primary symptom of OAB, and identify factors associated with improvement in urgency after surgical treatment for cystocele. Methods: We conducted a retrospective analysis of medical records for patients who underwent surgical treatment for cystocele and had preoperative urgency measuring ≥3 on a 5-point urinary sensation scale. Patients were categorized into 2 groups based on their urgency status 3 months postsurgery: those with improved urgency and those without improvement. Improvement was defined as a reduction of 2 or more points on the scale following surgery. We compared preoperative clinical and urodynamic factors between the 2 groups. Results: A total of 137 patients were included in the study, with 98 (71.5%) showing improvement in urgency symptoms after surgery. The improved group had a significantly higher prevalence of preoperative urgency urinary incontinence (UUI) (62.2% vs. 30.8%, P=0.001) and bladder outlet obstruction (43.9% vs. 20.5%, P=0.011) compared to the nonimproved group. Urodynamic evaluations indicated that the detrusor pressure at maximum flow rate (PdetQmax) was significantly higher in the improved group than in the nonimproved group (P=0.004). Multivariate logistic regression analysis identified preoperative UUI, higher PdetQmax, and lower vaginal parity as independent predictors of improvement in urgency postoperatively. Conclusions Preoperative UUI, higher PdetQmax, and lower vaginal parity were significant predictors of postoperative improvement in urgency. Both clinical and urodynamic factors may help identify patients with cystocele and preoperative urgency who are most likely to benefit from anatomical correction.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Background: There are few safe effective ways to relieve osteoarthritis (OA) pain; as a result, off-label psychotropic drug prescriptions have increased worldwide. This study examined the change in psychotropic drug prescriptions for patients with OA from 2011 to 2020 using the Korean National Health Insurance Service dataset. Methods: The study population consisted of patients with hip or knee OA aged ≥ 65 years.Psychotropic drugs included opioids, benzodiazepines, non-benzodiazepine hypnotics (Z-drugs), anti-epileptics, tricyclic antidepressants, selective serotonin reuptake inhibitors (SSRIs), serotonin and norepinephrine reuptake inhibitors (SNRIs), typical antipsychotics, atypical antipsychotics, and anxiolytics. The prevalence and long-term (> 3 months) prescription rates of psychotropic drugs in OA patients were calculated. Results: The study included 1,821,158 patients with OA (mean age 71.7 years; 65.32% female).Of the cohort, 49% had comorbidities for which psychotropics were indicated. The prevalence of psychotropic prescriptions decreased from 58.2% to 52.0% in 2018 and then leveled off.The long-term prescription rate remained constant until 2018 and then increased slightly.The most commonly prescribed psychotropics were opioids and long- and short-acting benzodiazepines. The prescription rates of opioids and long-acting benzodiazepines decreased from 2011 to 2020. For those with psychiatric co-morbidities, the prescription rates of anti-epileptics and SNRIs increased, while the prescription rates of anti-epileptics, SSRIs, other antidepressants, and atypical psychotropics increased for those without such co-morbidities. The most commonly prescribed psychotropics were diazepam and alprazolam, excluding tramadol and tramadol–acetaminophen combination. For those with psychiatric co-morbidities, the prescription rates of gabapentin and fentanyl increased, while for those without such co-morbidities, the prescription rates of lorazepam, fentanyl, escitalopram and quetiapine increased. Conclusion A significant number of older Korean patients with OA were prescribed psychotropic drugs in the absence of comorbidities requiring such drugs, including drugs that have little effect on OA and unfavorable safety profiles in older adults.

Background: There are few safe effective ways to relieve osteoarthritis (OA) pain; as a result, off-label psychotropic drug prescriptions have increased worldwide. This study examined the change in psychotropic drug prescriptions for patients with OA from 2011 to 2020 using the Korean National Health Insurance Service dataset. Methods: The study population consisted of patients with hip or knee OA aged ≥ 65 years.Psychotropic drugs included opioids, benzodiazepines, non-benzodiazepine hypnotics (Z-drugs), anti-epileptics, tricyclic antidepressants, selective serotonin reuptake inhibitors (SSRIs), serotonin and norepinephrine reuptake inhibitors (SNRIs), typical antipsychotics, atypical antipsychotics, and anxiolytics. The prevalence and long-term (> 3 months) prescription rates of psychotropic drugs in OA patients were calculated. Results: The study included 1,821,158 patients with OA (mean age 71.7 years; 65.32% female).Of the cohort, 49% had comorbidities for which psychotropics were indicated. The prevalence of psychotropic prescriptions decreased from 58.2% to 52.0% in 2018 and then leveled off.The long-term prescription rate remained constant until 2018 and then increased slightly.The most commonly prescribed psychotropics were opioids and long- and short-acting benzodiazepines. The prescription rates of opioids and long-acting benzodiazepines decreased from 2011 to 2020. For those with psychiatric co-morbidities, the prescription rates of anti-epileptics and SNRIs increased, while the prescription rates of anti-epileptics, SSRIs, other antidepressants, and atypical psychotropics increased for those without such co-morbidities. The most commonly prescribed psychotropics were diazepam and alprazolam, excluding tramadol and tramadol–acetaminophen combination. For those with psychiatric co-morbidities, the prescription rates of gabapentin and fentanyl increased, while for those without such co-morbidities, the prescription rates of lorazepam, fentanyl, escitalopram and quetiapine increased. Conclusion A significant number of older Korean patients with OA were prescribed psychotropic drugs in the absence of comorbidities requiring such drugs, including drugs that have little effect on OA and unfavorable safety profiles in older adults.

Background: and Purpose We aimed to determine the proportion of Korean patients with early Alzheimer’s disease (AD) who are eligible to receive lecanemab based on the United States Appropriate Use Recommendations (US AUR), and also identify the barriers to this treatment. Methods: We retrospectively enrolled 6,132 patients with amnestic mild cognitive impairment or mild amnestic dementia at 13 hospitals from June 2023 to May 2024. Among them, 2,058 patients underwent amyloid positron emission tomography (PET) and 1,199 (58.3%) of these patients were amyloid-positive on PET. We excluded 732 patients who did not undergo brain magnetic resonance imaging between June 2023 and May 2024. Finally, 467 patients were included in the present study. Results: When applying the criteria of the US AUR, approximately 50% of patients with early AD were eligible to receive lecanemab treatment. Among the 467 included patients, 36.8% did not meet the inclusion criterion of a Mini-Mental State Examination (MMSE) score of ≥22. Conclusions Eligibility for lecanemab treatment was not restricted to Korean patients with early AD except for those with an MMSE score of ≥22. The MMSE criteria should therefore be reconsidered in areas with a higher proportion of older people, who tend to have lower levels of education.