Buttock augmentation is an increasingly popular cosmetic procedure designed to enhance buttock contour, size, and shape. However, the safety profile of this procedure remains insufficiently established, and it carries risks of complications, including foreign body reactions and infections. These complications may be exacerbated by filler migration, resulting in large soft-tissue cavities that resemble pseudocysts. In this study, we describe two patients who developed severe complications following massive filler injections to the buttocks. A 56-year-old female patient presented with a 6×5 cm soft-tissue defect associated with an extensive underlying dead space, sinus tract formation, and a large pocket extending across the buttock. Additionally, a 50-year-old female patient developed diffuse cellulitis and multiple abscesses secondary to migration of an infected filler-related pseudocyst. Both patients underwent successful en bloc capsulectomy, resulting in marked clinical improvement without recurrence or postoperative complications. These cases underscore the serious complications associated with large-volume filler injections and highlight the importance of comprehensive surgical management in addressing late-stage adverse outcomes.

Spinal melanocytoma (SMC) is a rare, slow-growing tumor arising from melanocytes in the spinal cord. We report a patient with a cervical intra- and extradural spinal tumor causing progressive weakness and numbness. On magnetic resonance imaging (MRI), the lesion showed intense homogeneous enhancement, similar to that seen in common neurogenic spinal tumors. After complete resection, pathological examination confirmed melanocytoma. A review of previously reported cases identified 26 reports of this tumor in the cervical spine, most of which were treated with complete surgical resection. Gross total resection is the preferred treatment, although radiation therapy may be considered when residual tumor remains. We report a 25-year-old male patient who presented with progressive weakness and numbness in both the upper and lower extremities for 3 months. MRI showed homogeneous enhancement. The mass compressed the spinal cord at C6–7 and extended through the neural foramen. Based on the MRI findings, spinal schwannoma was suspected preoperatively. Surgical resection was performed with laminectomy, durotomy, and right facetectomy. A dark-colored mass with well-demarcated margins was exposed and removed. Postoperative MRI confirmed complete removal of the mass. The patient recovered well, and his preoperative myelopathic symptoms gradually improved. SMC is a rare benign tumor that may be mistaken for schwannoma. The treatment of choice is gross total resection.

Purpose: Overactive bladder (OAB) symptoms may improve following surgical correction of cystocele. This study aimed to evaluate changes in urgency, the primary symptom of OAB, and identify factors associated with improvement in urgency after surgical treatment for cystocele. Methods: We conducted a retrospective analysis of medical records for patients who underwent surgical treatment for cystocele and had preoperative urgency measuring ≥3 on a 5-point urinary sensation scale. Patients were categorized into 2 groups based on their urgency status 3 months postsurgery: those with improved urgency and those without improvement. Improvement was defined as a reduction of 2 or more points on the scale following surgery. We compared preoperative clinical and urodynamic factors between the 2 groups. Results: A total of 137 patients were included in the study, with 98 (71.5%) showing improvement in urgency symptoms after surgery. The improved group had a significantly higher prevalence of preoperative urgency urinary incontinence (UUI) (62.2% vs. 30.8%, P=0.001) and bladder outlet obstruction (43.9% vs. 20.5%, P=0.011) compared to the nonimproved group. Urodynamic evaluations indicated that the detrusor pressure at maximum flow rate (PdetQmax) was significantly higher in the improved group than in the nonimproved group (P=0.004). Multivariate logistic regression analysis identified preoperative UUI, higher PdetQmax, and lower vaginal parity as independent predictors of improvement in urgency postoperatively. Conclusions Preoperative UUI, higher PdetQmax, and lower vaginal parity were significant predictors of postoperative improvement in urgency. Both clinical and urodynamic factors may help identify patients with cystocele and preoperative urgency who are most likely to benefit from anatomical correction.

Background: Dutasteride, a 5-alpha reductase inhibitor, is prescribed for male androgenetic alopecia (AGA) in Korea and Japan. Despite its efficacy, its use is limited by its long half-life, potent dihydrotestosterone suppression, and adverse effects. Objective: To investigate the efficacy and safety of 0.2 mg dutasteride for male AGA. Methods: Patients with male AGA were randomized to receive 0.2 mg dutasteride, placebo, or 0.5 mg dutasteride (2:2:1) once daily for 24 weeks. Safety and efficacy endpoints were assessed. Results: Overall, 139 men were analyzed. At week 24, the change in hair count within the target area at the vertex from baseline was significantly higher in the 0.2 mg dutasteride group than in the placebo group (21.53 vs. 5.96, p=0.0072). Dutasteride (0.2 mg) treatment led to greater hair growth improvement, as assessed by investigators at week 24 (p=0.0096) and an independent panel at weeks 12 and 24 (p=0.0306, p=0.0001). For all efficacy endpoints, 0.2 mg dutasteride was as effective as 0.5 mg dutasteride. The incidence of adverse events was low and not statistically different between the 0.2 mg dutasteride and placebo groups. The limitation of this study is the limited number of participants. Conclusion Low-dose (0.2 mg) dutasteride for male AGA showed significant efficacy and favorable safety profile.Trial Registration: ClinicalTrials.gov Identifier: NCT04825561

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Objective: This study aimed to investigate the prevalence and characteristics of impacted teeth (ITs) in orthodontic patients at university dental hospitals in Korea. Methods: This study included 14,774 patients who visited the Department of Orthodontics at 10 university dental hospitals in Korea between 2020 and 2022 and underwent orthodontic diagnosis. The prevalence and characteristics of ITs were investigated using orthodontic diagnostic records, radiographs, and diagnostic casts. Results: The prevalence of ITs, excluding third molar impaction, in Korean orthodontic patients was 13.6% (n = 2,014).The prevalence of ITs in pediatric orthodontic patients was 24.5% (n = 1,614).Of these patients, 68.2% had one IT, 27.5% had two ITs, 24.3% had bilateral IT, and 75.7% had unilateral IT. The most frequent IT was the maxillary canine (50.1%), followed by the mandibular second molar (11.7%), and maxillary second premolar (9.6%). An abnormal eruption path (46.5%) was the most frequent etiology. Orthodontic traction after surgical exposure (70.6%) was the most frequent treatment option. Among the patients with ITs, 29.8% had other dental anomalies, such as tooth agenesis (8.7%), microdontia (8.0%), and supernumerary teeth (5.1%). Furthermore, 50.8% had complications such as cystic lesions (18.3%), transposition (17.7%), and root resorption (14.8%).Among the patients with maxillary canine impaction, 62.2% had labial maxillary canine impaction and 21.1% had palatal maxillary canine impaction. Conclusions The prevalence of ITs in Korean orthodontic patients at university dental hospitals was high, particularly in pediatric orthodontic patients.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.