OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

OBJECTIVE: To identify the risk factors associated with the development of post-Nuss procedure scoliosis in pectus excavatum patients and to establish a relevant predictive model. METHODS: A retro-spective review was conducted on pectus excavatum patients who underwent Nuss procedure in Department of Thoracic Surgery at Beijing Jishuitan Hospital between January 2018 and February 2023. We gathered the patient demographic information (including age, sex, height, weight, and body mass index) and diagnostic imaging results (echocardiogram, chest CT scan, full-spine radiography, and PA/lateral chest X-rays), and measurements of Haller index, asymmetry index, sternal torsion angle (STA) index, and Cobb angle changes. The risk of post-Nuss procedure scoliosis was assessed. Cox regression analysis was performed to identify independent risk factors for scoliosis development in the pectus excavatum patients. Based on the results of the Cox regression analysis, a risk prediction model was established, and its specific predictive performance was assessed through internal cross-validation. RESULTS: A total of 59 pectus excavatum patients who underwent Nuss procedure were included after applying inclusion and exclusion criteria. The median follow-up duration was 6.84 months, and the follow-up results showed significant improvements in Haller index, STA index, and asymmetry index postoperatively. Twelve patients developed scoliosis 3 months after Nuss procedure, while 47 patients did not, the incidence of scoliosis was 20.3%. Cox regression analysis identified preoperative pulmonary artery hypertension and preoperative asymmetry index as independent risk factors for post-Nuss procedure scoliosis. A predictive model was constructed based on single-factor Cox regression analysis results, incorporating age, height, weight, body mass index, preoperative pulmonary artery hypertension, preoperative Haller index, STA index, asymmetry index, and Cobb angle. The receiver operating characteristic (ROC) curve was plotted, and the area under the curve (AUC) for the overall predictive model was calculated to be 0.995. A calibration curve demonstrated good alignment between predicted values and actual values. CONCLUSION Nuss procedure achieved favorable clinical outcomes. However, postoperative scoliosis emerged as a significant complication with a high incidence rate. Pulmonary artery hypertension and asymmetry index were independent predictors of post-Nuss procedure scoliosis. The predictive model developed in this study demonstrated robust performance in estimating the risk of postoperative scoliosis.
Humans ; Funnel Chest/surgery* ; Scoliosis/etiology* ; Child ; Male ; Female ; Adolescent ; Risk Factors ; Young Adult ; Postoperative Complications/epidemiology* ; Retrospective Studies ; Proportional Hazards Models

OBJECTIVE: To characterize the paraspinal muscles of adolescent idiopathic scoliosis (AIS) patients, and to further explore its etiology. METHODS: Clinical records and paraspinal muscle biopsies at the apex vertebra region during posterior scoliosis correction surgery of 18 AIS were collected from November 2018 to August 2019. Following standardized processing of fresh muscle tissue biopsy, serial sections with conventional hematoxylin-eosin (HE) and histochemical and immunohistochemical (IHC) with antibody Dystrophin-1 (R-domain), Dystrophin-2 (C-terminal), Dystrophin-3 (N-terminal), Dystrophin-total, Myosin (fast), major histocompatibility complex 1 (MHC-1), CD4, CD8, CD20, and CD68 staining were obtained. Biopsy samples were grouped according to the subjects' median Cobb angle (Cobb angle ≥ 55° as severe AIS group and Cobb angle < 55° as mild AIS group) and Nash-Moe's classification respectively, and the corresponding pathological changes were compared between the groups statistically. RESULTS: Among the 18 AIS patients, 8 were in the severe AIS group (Cobb angle ≥55°) and 10 in the mild AIS group (Cobb angle < 55°). Both severe and mild AIS groups presented various of atrophy and degeneration of paraspinal muscles, varying degrees and staining patterns of immune-expression of Dystrophin-3 loss, especially Dystrophin-2 loss in severe AIS group with significant differences, as well as among the Nash-Moe classification subgroups. Besides, infiltration of CD4⁺ and CD8⁺ cells in the paraspinal muscles and tendons was observed in all the patients while CD20⁺ cells were null. The expression of MHC-1 on myolemma was present in some muscle fibers. CONCLUSION The histologic of paraspinal muscle biopsy in AIS had similar characteristic changes, the expression of Dystrophin protein was significantly reduced and correlated with the severity of scoliosis, suggesting that Dystrophin protein dysfunctions might contribute to the development of scoliosis. Meanwhile, the inflammatory changes of AIS were mainly manifested by T cell infiltration, and there seemed to be a certain correlation between inflammatory cell infiltration, MHC-1 expression and abnormal expression of Dystrophin. Further research along the lines of this result may open up new ideas for the diagnosis of scoliosis and the treatment of paraspinal myopathy.
Humans ; Adolescent ; Scoliosis/surgery* ; Paraspinal Muscles/pathology* ; Dystrophin ; Non-alcoholic Fatty Liver Disease/pathology* ; Kyphosis/pathology* ; Biopsy

To investigate the effects of postoperative fusion implantation on the mesoscopic biomechanical properties of vertebrae and bone tissue osteogenesis in idiopathic scoliosis, a macroscopic finite element model of the postoperative fusion device was developed, and a mesoscopic model of the bone unit was developed using the Saint Venant sub-model approach. To simulate human physiological conditions, the differences in biomechanical properties between macroscopic cortical bone and mesoscopic bone units under the same boundary conditions were studied, and the effects of fusion implantation on bone tissue growth at the mesoscopic scale were analyzed. The results showed that the stresses in the mesoscopic structure of the lumbar spine increased compared to the macroscopic structure, and the mesoscopic stress in this case is 2.606 to 5.958 times of the macroscopic stress; the stresses in the upper bone unit of the fusion device were greater than those in the lower part; the average stresses in the upper vertebral body end surfaces were ranked in the order of right, left, posterior and anterior; the stresses in the lower vertebral body were ranked in the order of left, posterior, right and anterior; and rotation was the condition with the greatest stress value in the bone unit. It is hypothesized that bone tissue osteogenesis is better on the upper face of the fusion than on the lower face, and that bone tissue growth rate on the upper face is in the order of right, left, posterior, and anterior; while on the lower face, it is in the order of left, posterior, right, and anterior; and that patients' constant rotational movements after surgery is conducive to bone growth. The results of the study may provide a theoretical basis for the design of surgical protocols and optimization of fusion devices for idiopathic scoliosis.
Humans ; Scoliosis/surgery* ; Spinal Fusion/methods* ; Lumbar Vertebrae/surgery* ; Osteogenesis ; Biomechanical Phenomena/physiology* ; Finite Element Analysis

OBJECTIVE: To explore the effectiveness of a new point contact pedicle navigation template (referred to as "new navigation template" for simplicity) in assisting screw implantation in scoliosis correction surgery. METHODS: Twenty-five patients with scoliosis, who met the selection criteria between February 2020 and February 2023, were selected as the trial group. During the scoliosis correction surgery, the three-dimensional printed new navigation template was used to assist in screw implantation. Fifty patients who had undergone screw implantation with traditional free-hand implantation technique between February 2019 and February 2023 were matched according to the inclusion and exclusion criteria as the control group. There was no significant difference between the two groups ( P>0.05) in terms of gender, age, disease duration, Cobb angle on the coronal plane of the main curve, Cobb angle at the Bending position of the main curve, the position of the apical vertebrae of the main curve, and the number of vertebrae with the pedicle diameter lower than 50%/75% of the national average, and the number of patients whose apical vertebrae rotation exceeded 40°. The number of fused vertebrae, the number of pedicle screws, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were compared between the two groups. The occurrence of implant complications was observed. Based on the X-ray films at 2 weeks after operation, the pedicle screw grading was recorded, the accuracy of the implant and the main curvature correction rate were calculated. RESULTS: Both groups successfully completed the surgeries. Among them, the trial group implanted 267 screws and fused 177 vertebrae; the control group implanted 523 screws and fused 358 vertebrae. There was no significant difference between the two groups ( P>0.05) in terms of the number of fused vertebrae, the number of pedicle screws, the pedicle screw grading and accuracy, and the main curvature correction rate. However, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were significantly lower in trial group than in control group ( P<0.05). There was no complications related to screws implantation during or after operation in the two groups. CONCLUSION The new navigation template is suitable for all kinds of deformed vertebral lamina and articular process, which not only improves the accuracy of screw implantation, but also reduces the difficulty of operation, shortens the operation time, and reduces intraoperative bleeding.
Humans ; Orthopedic Procedures ; Pedicle Screws ; Retrospective Studies ; Scoliosis/surgery* ; Spinal Fusion/methods* ; Spine ; Surgery, Computer-Assisted/methods*

OBJECTIVE: To analyze the causes of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy, summarize the clinical results, and propose preventive measures. METHODS: Retrospective analysis was made on the data of 8 cases of lumbar spondylopathy and vertebral fracture treated by oblique lateral interbody fusion in three medical centers from October 2014 to December 2018. All were female, aged from 50 to 81 years with an average of 66.4 years. Disease types included 1 case of lumbar degenerative disease, 3 cases of lumbar spinal stenosis, 2 cases of lumbar degenerative spondylolisthesis and 2 cases of lumbar degenerative scoliosis. Preoperative dual energy X-ray bone mineral density test showed that 2 cases had T-value >-1 SD, 2 cases had T-value -1 to -2.5 SD, and 4 cases had T-value <-2.5 SD. Single segment fusion was in 5 cases, two segment fusion in 1 case and three segment fusion in 2 cases. Four cases were treated with OLIF Stand-alone and 4 cases were treated with OLIF combined with posterior pedicle screw fixation. Postoperative imaging examination showed vertebral fracture, and all of them were single vertebral fracture. There were 2 cases of right lower edge fracture of upper vertebral body at fusion segment, 6 cases of lower vertebral body fracture at fusion segment, and 6 cases with endplate injury and fusion cage partially embedded in vertebral body. Three cases of OLIF Stand-alone were treated with pedicle screw fixation via posterior intermuscular approach, while one case of OLIF Stand-alone and four cases of OLIF combined with posterior pedicle screw fixation were not treated specially. RESULTS: The 5 cases of initial operation and 3 cases of reoperation did not show wound skin necrosis or wound infection. The follow-up time was from 12 to 48 months with an average of 22.8 months. Visual analogue scale (VAS) of low back pain was preoperative decreased from 4 to 8 points (averagely 6.3 points) and postoperative 1 to 3 points (averagely 1.7 points) at the final follow-up. Oswestry disability index (ODI) was preoperative 39.7% to 52.4% (averagely 40.2%), and postoperative 7.9% to 11.2% (averagely 9.5%) at the final follow-up. During the follow-up, there was no loosening or fracture of the pedicle screw system, and no lateral displacement of the fusion cage;however, the fusion cage at the vertebral fracture segment had obvious subsidence. The intervertebral space height of vertebral fracture segment was preoperaive 6.7 to 9.2 mm (averagely 8.1 mm), and postoperative 10.5 to 12.8 mm (averagely 11.2 mm). The improvement rate after operation was 37.98% compared to preoperative. The intervertebral space height at final follow-up was 8.4 to 10.9 mm (averagely 9.3 mm), and the loss rate was 16.71% compared with that after operation. At the final follow-up, interbody fusion was achieved in all cases except for one that could not be identified. CONCLUSION The incidence of vertebral fracture during oblique lateral interbody fusion in the treatment of lumbar spondylopathy is lower, and there are many reasons for fracture, including preoperative bone loss or osteoporosis, endplate injury, irregular shape of endplate, excessive selection of fusion cage, and osteophyte hyperplasia at the affected segment. As long as vertebral fracture is found in time and handled properly, the prognosis is well. However, it still needs to strengthen prevention.
Humans ; Female ; Male ; Spinal Fractures/surgery* ; Retrospective Studies ; Treatment Outcome ; Lumbar Vertebrae/surgery* ; Spondylolisthesis/surgery* ; Scoliosis ; Spinal Fusion/methods*

OBJECTIVE: To explore the effect of Chinese massage on the rehabilitation of scoliosis patients undergoing 3D printing orthopedics. METHODS: A retrospective selection of 262 patients with adolescent idiopathic scoliosis(AIS) who underwent 3D printing technology orthopedics admitted to the Department of Orthopedics in our hospital from January 2013 to January 2019 were selected for clinical research. According to the rehabilitation treatment methods adopted by the patients after the operation, the patients were divided into control group and observation group, there were 131 cases in each group. The observation group was treated with traditional Chinese acupuncture and massage after operation, and the control group was treated with conventional rehabilitation. The torso rotation angle and the maximum Cobb angle before and after intervention were measured and compared between two groups, Oswestry Disability Index(ODI) was used for functional evaluation, and the visual analogue scale(VAS) was used to evaluate the changes in pain before and after rehabilitation intervention. RESULTS: After the intervention, the trunk rotation angle and maximum Cobb angle of the observation group were significantly better than those of the control group, the VAS score of the observation group was significantly lower than that of the control group, ODI in the observation group was significantly lower than that in the control group, and the difference was statistically significant(P<0.05). CONCLUSION After scoliosis patients undergo preoperative 3D printing correction, the scientific and reasonable implementation of TCM acupuncture and massage can effectively improve the patient's vertebral rotation angle, maximum Cobb angle, and improve the patient's spinal function.
Adolescent ; Humans ; Lumbar Vertebrae/surgery* ; Massage ; Medicine, Chinese Traditional ; Orthopedic Procedures ; Orthopedics ; Printing, Three-Dimensional ; Retrospective Studies ; Scoliosis/surgery* ; Spinal Fusion ; Treatment Outcome

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement assisted by orthopedic robot and C-arm fluoroscopy. METHODS: The clinical data of 36 patients with spinal diseases underwent surgical treatment from January 2019 to August 2020 was retrospectively analyzed. Among them, 18 cases were implanted pedicle screws assisted by orthopaedic robot(observation group), including 12 males and 6 females, aged from 16 to 61 years with an average of (38.44±3.60) years;there were 1 case of adolescent scoliosis, 1 case of spinal tuberculosis, 7 cases of lumbar spondylolisthesis, 4 cases of thoracic fracture and 5 cases of lumbar fracture. Another 18 cases were implanted pedicle screws assisted by C-arm fluoroscopy(control group), including 10 males and 8 females, aged from 18 to 58 years with an average of (43.22±2.53) years;there were 1 case of adolescent scoliosis, 6 cases of lumbar spondylolisthesis, 6 cases of thoracic fracture and 5 cases of lumbar fracture. The intraoperative fluoroscopy times, nail placement time and postoperative complications were recorded in two groups. CT scan was performed after operation. The Gertzbein-Robbins standard was used to evaluate the accuracy of pedicle screw placement which was calculated. RESULTS: The number of intraoperative fluoroscopy in observation group was(6.89±0.20) times, which was significantly higher than that in control group(14.00±0.18)times(P<0.05). The placement time of each screw in observation group was(2.56±0.12) min, which was significantly different from that in control group(4.22±0.17) min (P<0.05). One case of incision infection occurred in control group after operation, and recovered after active dressing change. During the follow-up period, no serious complications such as screw loosening and fracture occurred in two groups, and there was no significant difference in complications between two groups(P>0.05). A total of 107 screws were placed in observation group, including 101 screws in class A, 4 in class B, 2 in class C, 0 in class D and 0 in class E, the accuracy rate of pedicle screw placement=[(number of screws in class A+B) / the number of all screws placed in the group] ×100%=98.1%(105/107); and a total of 104 screws were placed in control group, including 90 screws in class A, 4 in class B, 5 in class C, 5 in class D and 0 in class E, the accuracy rate of pedicle screw implantation=[(number of screws in class A+B/the number of all screws placed in the group]×100%=90.3% (94/104); there was significant difference between two groups (P<0.05). CONCLUSION Orthopaedic robot assisted pedicle screw placement has the advantages of less fluoroscopy times, shorter screw placement time and higher accuracy, which can further improve the surgical safety and has a broad application prospect in the orthopaedic.
Adolescent ; Adult ; Female ; Fluoroscopy/methods* ; Humans ; Lumbar Vertebrae/surgery* ; Male ; Middle Aged ; Pedicle Screws ; Retrospective Studies ; Robotic Surgical Procedures/methods* ; Robotics ; Scoliosis ; Spinal Fusion/methods* ; Surgery, Computer-Assisted ; Young Adult

Objective: To investigate the role of minimally invasive crenel lateral lumbar interbody fusion (CLIF) in the decision of fusion level in posterior correction for severe adult degenerative scoliosis. Methods: This is a prospective study.Patients with level Ⅴ and Ⅵ of Lenke-Silva classification who were treated at Department of Orthopedics,the Second Affiliated Hospital, School of Medicine, Zhejiang University from June 2016 to March 2019 were included.First,the enrolled patients completed the preoperative clinical and imaging examination,the Lenke-Silva classification was evaluated,the surgical segments in first-stage CLIF was determined and the fusion segments required for single-stage posterior correction was predicted.After the first-stage CLIF,patients received reassessment of Lenke-Silva classification and global coronal and sagittal balance.Patients were divided into two groups:the effective group (level of Lenke-Silva classification decreased) and the ineffective group (level of Lenke-Silva classification unchanged).Second-stage posterior surgery was performed based on the results of reassessments.The fusion segment,Cobb angle,parameters of global coronal and sagittal plane,visual analogue pain score (VAS) and Oswestry disability index (ODI) were compared between the two groups preoperatively,after first-stage CLIF,second-stage posterior fixation and at the final follow-up.The potential factors associated with the decrease of the level of Lenke-Silva classification were recorded and compared between the two groups.Independent sample t test,repeated measure analysis of variance,rank sum test,χ² test or Fisher exact method were used to compare the difference among groups. Results: Fifty-four patients were enrolled,including 8 males and 46 females,aged (68.8±5.8) years (range:56 to 77 years).Preoperatively,26 patients were classified as level Ⅴ by Lenke-Silva classification,28 cases were grade Ⅵ.CLIF was performed in 194 segments,with 114 segments(58.8%) receiving anterior column realignment (ACR) and 15 segments(7.7%) using hyperlordotic cages.After first-stage CLIF,22 patients with level Ⅴ and 10 patients with Ⅵ of Lenke-Silva classification decreased and were classified into effective group.The level of the remaining 4 patients with level Ⅴ and 18 patients with grade Ⅵ unchanged and were classified into ineffective group.Preoperatively,the apical vertebrae was below L₁ in all 32 patients of effective group and 18 (81.8%,18/22) patients of ineffective group.The difference was statistically significant (P=0.023).There were 7 (31.8%,7/22) patients had continuous osteophyte in front of the intervertebral space in ineffective group,while none patient had continuous osteophyte in front of the intervertebral space in effective group,and the difference was statistically significant (P=0.001).In first-stage CLIF,more intraoperative ACR(71.2% vs.39.5%,χ²=20.660,P<0.01)and hyperlordotic cage (12.7% vs.0,P=0.001) were used in the effective group,while there was less severe cage subsidence after the operation (5.9% vs.15.8%,χ²=4.793,P=0.029) in effective group.After first-stage CLIF,there was no difference in the Cobb angle between the two groups.While,lumbar lordosis (LL) in effective group (34.0±8.3)° was greater than that of the ineffective group (25.5±9.7)° (t=3.478,P=0.001),and the difference between the pelvic incidence (PI) and LL in effective group (15.7±4.6)°was significantly smaller than ineffective group(20.0±10.8)° (t=-2.129,P=0.038).The posterior fusion levels was less,the rate of fusion to thoracic spine region and the actual fusion segment was less than that of single-stage posterior correction in effective group (all P<0.01).All patients were follow-up for 24 to 45 months.There was no significant difference in radiological and clinical results between the two groups after first-,second-stage surgery and at the final follow-up (all P>0.05). Conclusions: First-stage CLIF decreased the Lenke-Silva classification of some patients with severe degenerative scoliosis.Combined with the reassessment of Lenke-Silva classification and global coronal and sagittal plane,it helps to accurately determine the fusion segment.Decrease of Lenke-Silva classification is associated with the preoperative level of apical vertebrae,continuous osteophytes in front of the intervertebral space,intraoperative use of ACR and hyperlordotic cage and the degree of cage subsidence postoperatively.
Adult ; Aged ; Animals ; Female ; Humans ; Lumbar Vertebrae/surgery* ; Male ; Middle Aged ; Prospective Studies ; Retrospective Studies ; Scoliosis/surgery* ; Spinal Fusion ; Treatment Outcome

OBJECTIVE: To evaluate the effect of degenerative scoliosis on the difficulty and efficacy of minimally invasive transforaminal lumbar interbody fusion(MIS-TLIF) in the treatment of lumbar spinal stenosis. METHODS: From September 2016 to September 2019, 52 patients with lumbar spinal stenosis treated by MIS-TLIF were retrospectively analyzed, including 16 males and 36 females, aged from 42 to 71(63.44±5.96) years old, the course of disease from 1.5 to 6.5 years, with an average of (3.69±1.10) years. All patients had lower extremity root pain or numbness, 41 patients had intermittent claudication. There were 31 cases of L RESULTS: All patients were followed up for 12 to 36 months, with an average of (19.58±5.33) months. The operation time and intraoperative bleeding in stenosis group were better than those in scoliosis group ( CONCLUSION For patients with lumbar spinal stenosis undergoing MIS-TLIF, degenerative scoliosis can lead to prolonged operation time and increased bleeding. However, it has no significant effect on therelief of postoperative symptoms, postoperative complications and the recovery of lumbar function.
Adult ; Aged ; Female ; Humans ; Lumbar Vertebrae/surgery* ; Male ; Middle Aged ; Minimally Invasive Surgical Procedures ; Retrospective Studies ; Scoliosis/surgery* ; Spinal Fusion ; Spinal Stenosis/surgery* ; Treatment Outcome