PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Purpose: Stem cell transplantation (SCT) has historically played a major role in the long-term remission of mantle cell lymphoma (MCL), an incurable hematological malignancy. Using data from the Korean Society of Bone and Marrow Transplantation registry, we retrospectively analyzed the role of autologous (auto) and allogeneic (allo) SCT in longterm MCL survival. Methods: This study analyzed data from 188 patients (age ≥ 19 years at the time of transplantation) who underwent a transplant for MCL from 2011 to 2020. Progression-free survival (PFS) was defined as the time from transplantation to disease progression, relapse, or death from any cause. Overall survival (OS) was defined as the time from transplan‑ tation to death from any cause or the last follow-up. Results: In total, 109 patients underwent consolidative SCT after first-line chemotherapy. The 3-year PFS and OS rates were 65.4% and 78.5%, respectively, in the auto-SCT group, and 66.7% and 71.4%, respectively, in the allo-SCT group. The PFS and OS did not differ significantly between the auto- and allo-SCT groups. As part of salvage treatment, 52 patients with relapsed or refractory disease underwent auto- or allo-SCT. Patients who underwent auto-SCT with complete remis‑ sion/partial remission status reported better outcomes. In patients with refractory status, allogeneic transplantation using human leukocyte antigen (HLA) fully matched donors was a significantly favorable factor for PFS and OS. Conclusion The long-term survival of patients who underwent consolidative transplantation was similar to that reported in previous studies. Auto-SCT may be beneficial in patients who respond to salvage therapy, whereas allo-SCT with HLA-matched donors may be an alternative for patients with refractory disease. 

Background/Aims: The Gout Impact Scale (GIS), a part of the Gout Assessment Questionnaire 2.0, is used to measure gout-specific health-related quality of life (HRQOL). Although several studies have been conducted on the factors affecting the HRQOL of patients with gout, few have focused on lifestyle factors. This study aimed to investigate the correlation between lifestyle habits and HRQOL using the GIS in patients with gout. Methods: We used data from the Urate-Lowering TheRApy in Gout (ULTRA) registry, a prospective cohort of Korean patients with gout treated at multiple centers nationwide. The patients were aged ≥18 years and met the 2015 American College of Rheumatology/European League Against Rheumatism gout classification criteria. They were asked to complete a GIS and questions regarding their lifestyle habits at enrollment. Results: The study included 232 patients. ‘Gout concern overall’ scores in the GIS were significantly lower in patients who exercised more frequently and consumed soft drinks and meat less, and ‘well-being during attack’ scores were significantly lower in patients who consumed vegetables and exercised more frequently. The frequency of vegetable consumption had a negative linear relationship with the ‘well-being during attack’ and ‘gout concern during attack’ scores (p = 0.01, p = 0.001, respectively). The frequency of exercise had a negative linear relationship with the ‘gout concern overall’ and ‘gout concern during attack’ scores (p = 0.04 and p = 0.002, respectively). Conclusions Patients with gout who frequently consumed vegetables and exercised regularly experienced less impact of gout, exhibiting a better GIS that represented HRQOL.

Purpose: Programmed death-1 blockade with pembrolizumab has shown promising activity in relapsed/refractory (R/R) extranodal natural killer/T-cell lymphoma (NKTCL), but studies are limited, with small patient numbers. Materials and Methods: Thirteen institutes involved with the Consortium for Improving Survival of Lymphoma, a Korean lymphoma study group, collected the clinical data of 59 patients treated with pembrolizumab as salvage therapy between 2016 and 2022. Results: The median age of the patients was 60 years (range, 22 to 87 years), and 76.3% had advanced Ann Abor stage disease. Pembrolizumab was given to 35.6%, 40.7%, and 23.7% of the patients as second-, third-, and fourth- or higher-line chemotherapy, respectively. The overall response rate was 40.7%, with 28.8% having complete response. The estimated 2-year progression-free survival (PFS) and overall survival rates for all patients were 21.5% and 28.7%, respectively; for responders, the rates were 53.0% and 60.7%, respectively. Although not statistically significant, Eastern Cooperative Oncology Group performance status ≥ 2 (hazard ratio [HR], 1.91; 95% confidence interval [95% CI], 0.93 to 3.94; p=0.078) and stage III or IV disease (HR, 2.59; 95% CI, 0.96 to 6.96; p=0.060) were associated with a trend toward shorter PFS in multivariate analysis. Grade 3 or 4 adverse events (AEs) were noted in 12 patients (20.3%); neutropenia (10.2%), fatigue (6.8%), and pneumonitis (5.1%) were most common AEs. Conclusion In conclusion, while pembrolizumab had a modest effect on patients with R/R NKTCL, it may be a useful salvage therapy for patients with localized disease and good performance status.

Background: The benefits of transradial access (TRA) over transfemoral access (TFA) for bifurcation percutaneous coronary intervention (PCI) are uncertain because of the limited availability of device selection. This study aimed to compare the procedural differences and the in-hospital and long-term outcomes of TRA and TFA for bifurcation PCI using secondgeneration drug-eluting stents (DESs). Methods: Based on data from the Coronary Bifurcation Stenting Registry III, a retrospective registry of 2,648 patients undergoing bifurcation PCI with second-generation DES from 21 centers in South Korea, patients were categorized into the TRA group (n = 1,507) or the TFA group (n = 1,141). After propensity score matching (PSM), procedural differences, in-hospital outcomes, and device-oriented composite outcomes (DOCOs; a composite of cardiac death, target vessel-related myocardial infarction, and target lesion revascularization) were compared between the two groups (772 matched patients each group). Results: Despite well-balanced baseline clinical and lesion characteristics after PSM, the use of the two-stent strategy (14.2% vs. 23.7%, P = 0.001) and the incidence of in-hospital adverse outcomes, primarily driven by access site complications (2.2% vs. 4.4%, P = 0.015), were significantly lower in the TRA group than in the TFA group. At the 5-year follow-up, the incidence of DOCOs was similar between the groups (6.3% vs. 7.1%, P = 0.639). Conclusion The findings suggested that TRA may be safer than TFA for bifurcation PCI using second-generation DESs. Despite differences in treatment strategy, TRA was associated with similar long-term clinical outcomes as those of TFA. Therefore, TRA might be the preferred access for bifurcation PCI using second-generation DES.

Objective: : Intracerebral hemorrhage (ICH) accompanies higher mortality rates than other type of stroke. This study aimed to investigate the association between hospital volume and mortality for cases of ICH. Methods: : We used nationwide data from 2013 to 2018 to compare high-volume hospitals (≥32 admissions/year) and low-volume hospitals (<32 admissions/year). We tracked patients’ survival at 3-month, 1-year, 2-year, and 4-year endpoints. The survival of ICH patients was analyzed at 3-month, 1-year, 2-year, and 4-year endpoints using Kaplan-Meier survival analysis. Multivariable logistic regression analysis and Cox regression analysis were performed to determine predictive factors of poor outcomes at discharge and death. Results: : Among 9086 ICH patients who admitted to hospital during 18-month period, 6756 (74.4%) and 2330 (25.6%) patients were admitted to high-volume and low-volume hospitals. The mortality of total ICH patients was 18.25%, 23.87%, 27.88%, and 35.74% at the 3-month, 1-year, 2-year, and 4-year, respectively. In multivariate logistic analysis, high-volume hospitals had lower poor functional outcome at discharge than low-volume hospitals (odds ratio, 0.80; 95% confidence interval, 0.72–0.91; p<0.001). In the Cox analysis, high-volume hospitals had significantly lower 3-month, 1-year, 2-year, and 4-year mortality than low-volume hospitals (p<0.05). Conclusion : The poor outcome at discharge, short- and long-term mortality in ICH patients differed according to hospital volume. High-volume hospitals showed lower rates of mortality for ICH patients, particularly those with severe clinical status.