AIM: To compare the changes in corneal epithelial thickness(CET)after small incision lenticule extraction(SMILE)and femtosecond laser-assisted in situ keratomileusis(FS-LASIK).METHODS: A total of 187 patients(187 eyes)who underwent either SMILE or FS-LASIK at Urumqi Aier Eye Hospital between December 2022 and November 2023 were collected. The patients were divided into SMILE group and FS-LASIK group according to surgical methods. The CET of the patients was measured by optical coherence tomography(OCT)system before surgery and at 1 wk, 1, 3, and 6 mo postoperatively.RESULTS: Changes in corneal epithelial thickness(△CET)in the central, paracentral, and mid-peripheral regions were compared at 6 mo postoperatively. The SMILE group was characterized by the most significant thickening in the central area and the least thickening in the mid-peripheral area; while the FS-LASIK group was characterized by the most significant thickening in the paracentral area and the least thickening in the mid-peripheral region. At 1 wk, 1, 3, and 6 mo postoperatively, within the 0-7 mm corneal area, the △CET for both the SMILE and FS-LASIK groups was correlated with the preoperative spherical equivalent.CONCLUSION: Within 6 mo postoperatively, both SMILE and FS-LASIK showed a similar trend in epithelial thickening but with distinct characteristics. The change in corneal epithelial thickness for both procedures was positively correlated with the preoperative diopter.

AIM: To observe the changes of corneal densitometry(CD)and higher-order aberrations after small incision lenticule extraction(SMILE), and to explore their correlations and influencing factors.METHODS: Prospective study. A total of 62 high-degree myopia and compound myopic astigmatism patients(62 eyes)who underwent SMILE in Urumqi Aier Eye Hospital from December 2022 to November 2023 were collected. The CD, root mean square of corneal higher-order aberrations(RMS HOA), spherical aberration, vertical coma, horizontal coma, and corneal epithelial thickness(CET)of the patients were measured before surgery, and at 1 d, 1 wk, 1, 3, and 6 mo after surgery, respectively.RESULTS:There were 4 patients lost to follow-up during the period, all due to failure to attend scheduled reexaminations. The number of complete and valid cases was 58 eyes. The CD in the central and paracentral regions of the anterior, middle, and total layer of the cornea increased significantly on the first day after surgery(all P<0.003). At 6 mo after surgery, there was a slight but statistically significant decrease in the CD of the central and paracentral regions of the anterior and the total anterior layer(all P<0.003). Compared with the preoperative baseline values, the RMS HOA, spherical aberration, and vertical coma significantly increased at 6 mo after surgery(all P<0.003), while the change in horizontal coma was not statistically significant. Compared with the preoperative baseline values, the CET in the central, paracentral, and peripheral regions of the cornea, as well as the total average CET in the 0-7 mm range of the cornea increased at 6 mo after surgery(all P<0.003). At 1 d after surgery, CD of the anterior layer and total layer in the central region of the cornea were positively correlated with the CET in the central region(rs=0.327, rs=0.250, all P<0.05). At 6 mo after the surgery, the CD of the middle layer and posterior layer in the central corneal region were negatively correlated with the preoperative spherical equivalent and the change of RMS HOA(all P<0.05).CONCLUSION:The anterior CD decreases at 6 mo after SMILE for high myopia correction, and there is a certain correlation between the changes in CD and some clinical parameters.

Objective To investigate factors that affect the treatment effect of laser vitrectomy for vit-reous opacity and the related factors that affect patient satisfaction,so as to evaluate its clinical value.Methods A total of 196 patients with vitreous opacity treated using the Ultra Q ReflexTM Nd:YAG laser system at our hospital between October 2019 and February 2024 were enrolled.Patient medical records and satisfaction questionnaires were analyzed.Investigational data underwent machine-coded classification,and a Python-based decision tree prediction model was employed to identify factors affecting treatment outcomes.Stata18.0 OLS linear regression was used to assess correlations between patient satisfaction and variables such as healthcare provider quality,treatment accessibility,and medical environment.Results After laser vitrectomy,95.3%of patients with vitreous opacity showed significant improvement in symptoms,and 90.3%expressed satisfac-tion with the improvement in postoperative visual quality.Patients'gender,age,preoperative vitreous opacity morphology,and refractive error below-6.00D had an impact on the treatment outcome(P<0.05).Python decision tree analysis demonstrated superior efficacy in patients aged>30-45 years with 6-12 months of symptom duration and refractive error<-6.00D.Stata18.0 OLS linear regression analysis showed that all examined variables were positively correlated at the 1%significance level,with patients'expected feelings having the greatest impact on postoperative satisfaction with treatment(r=1.053).Conclusion Ultra Q Nd:YAG laser vitreous ablation demonstrates high safety and patient satisfaction for vitreous opacity treatment.

Reports a case admitted in the Ward I of Department of Surgery of Zhengzhou Renji Hospital in June 2017. A young child who suffered destructive injury of left forearm, wrist and palm with severed 3rd-5th fingers. Tendon and neurovascular repairs of forearm, wrist and palm were performed with pedicled abdomina flap and the 3rd-5th fingers ectopic replantation in Phase I surgery. In the Phase II surgery, the abdomina flap division was carried out. The replantation of severed fingers after ectopic replantation and the reconstruction of foot defect with free anterolateral thigh flap(ALTF) were carried out in Phase III surgery. In Phase IV surgery, fingers functional reconstruction and foot flap thinning were performed. Four years after surgery, the thumb oppositions to middle, ring and little fingers could be completed, with slightly limitations. The appearance and texture of transferred foot flap were good, and the child could walk and run almost normally.

In the past ten years, the research and application of microbiome has continued to increase. The microbiome has gradually become the research focus in the fields of life science, environmental science, and medicine. Meanwhile, many countries and organizations around the world are launching their own microbiome projects and conducting a multi-faceted layout, striving to gain a strategic position in this promising field. In addition, whether it is scientific research or industrial applications, there has been a climax of research and a wave of investment and financing, accordingly, products and services related to the microbiome are constantly emerging. However, due to the rapid development of microbiome sequencing and analysis related technologies and methods, the research and application from various countries have not yet unified on the standards of technology, programs, and data. Domestic industry participants also have insufficient understanding of the microbiome. New methods, technologies, and theories have not yet been fully accepted and used. In addition, some of the existing standards and guidelines are too general with poor practicality. This not only causes obstacles in the integration of scientific research data and waste of resources, but also gives related companies unfair competition opportunity. More importantly, China still lacks national standards related to the microbiome, and the national microbiome project is still in the process of preparation. In this context, the experts and practitioners of the microbiome worked together and developed the consensus of experts. It can not only guide domestic scientific research and industrial institutions to regulate the production, learning and research of the microbiome, the application can also provide reference technical basis for the relevant national functional departments, protect the scale and standardized corporate company's interests, strengthen industry self-discipline, avoid unregulated enterprises from disrupting the market, and ultimately promote the benign development of microbiome-related industries.
China ; Consensus ; Humans ; Industry ; Microbiota

Gene modification is an important technique to understand gene function. We firstly constructed Δhfq::Spe and Δrne-710::Spe mutant strains of Escherichia coli MG1655. The fragment lacking of hfq and rne-710 was ligated to the auxiliary plasmid and separately replace the spectinomycin box by homologous recombinase system to obtain the Δhfq and Δrne-710 mutant strains. The combination of two-plasmid scarless genetic modification and fusion PCR led to a new way for the long DNA fragment gene deletions.

Objective To develop an up-converting phosphor technology based lateral flow assay ( UPT-LF) to detect ricin toxin ( RT) quickly, accurately and quantitatively.Methods Ricin-monoclonal antibodies were prepared and their affinity was evaluated before four types of monoclonal antibodies with the highest titer were applied to couple with the up-converting phosphor nano-particles ( UCP-NPs) as the bio-conjugate and disperse on the analysis membrane as the test line, respectively.Following systematic optimization to establish the RT-UPT-LF strip, the sensitivity, precision, quantita-tive ability and specificity of RT-UPT-LF were evaluated.Results The detection could be accomplished within 15 min and the detection limit of the RT-UPT-LF assay could reach 0.5 ng/ml within the quantitative detection range of 0.5-1000 ng/ml.Other non-specific toxins at a concentration of 1000 ng/ml did not cause any non-specific reactions.Conclusion The developed RT-UPT-LF strip provides a new means for on-site quantitative detection of ricin toxin.

Objective To establish a simple and quick loop-mediated isothermal amplification (LAMP)method for detection of Yersinia pestis.Methods LAMP Primers were designed based on the specific sequence 3a in Y.pestis chromosome.LAMP reaction results were detected using turbidity meter or visual method.The specificity of the constructed method was evaluated by detecting Y.pestis and its closely-related bacteria.The different dilution DNA template was detected with LAMP and PCR to evaluate the sensitivity of the method.Results Thirty strains of bacteria closely related to Y.pestis were detected by the constructed LAMP,and all the results were negative,indicating that the method had a very high specificity.The detection sensitivity of this LAMP assay was 20 pg of DNA per reaction,which was ten-fold that of the regular PCR.The detection reaction was completed in 25 min.Conclusion This LAMP method is quick,sensitive, specific and simple,which is expecked to become an effective method for rapid detection of Y.pestis on the scene.

Objective To prepare recombinant plasminogen activator(Pla) protein in E.coli BL21 cells that can be used in studying interactions between Yersinia pestis proteins and immunologic diagnosis of plague.Methods The pla gene was amplified by PCR and cloned into the pET28a expression vector.E.coli BL21 competent cells were transformed with the recombinant vectors, and isopropyl-β-D-thiogalactopyranoside ( IPTG) was added to induce expression of Pla protein. The expressed protein was detected by SDS-PAGE electrophoresis.The inclusion bodies of Pla protein were denatured in 8 mol/L urea, and then refolded using gradient urea solutions.The purified protein was identified by SDS-PAGE electrophoresis and Western blot.Results and Conclusion The constructed expression vector was demonstrated to be correct through agarose gel electrophoresis and sequencing.The recombinant Pla protein was accumulated as an inclusion body in E.coli, and the overexpression product was mainly a target protein, the yield of which was very high.SDS-PAGE purity of the bioactive Pla protein was obtained by denaturing and refolding the inclusion bodies.This study provides a simple and quick method for highly efficient preparation of biologically active Pla protein.