Objective To quantitatively assess the exposure-response association between exposure to heatwave and sudden death, estimate the attributable excess deaths, and identify potential vulnerable subgroups. Methods A time-stratified case-crossover study was conducted among residents who died from sudden death in Jiangsu Province, China between 2015 and 2021. Heatwave events in Jiangsu Province, defined using varying relative temperature thresholds and durations, were identified using temperature data from the China Meteorological Administration Land Data Assimilation System (CLDAS V2.0). Individual heatwave exposure was assessed based on each subject's residential address. The exposure-response association between heatwave and sudden death was evaluated using conditional logistic regression model combined with a Distributed Lag Nonlinear Model(DLNM). Heatwave-attributable excess deaths were estimated. Stratified analyses by sex and age were performed to assess potential effect modifications. Results Under all definitions, exposure to heatwave was significantly associated with an increased risk of sudden death, and the risk increased with the intensity of heatwave. Using the P95_3d definition (temperature exceeding the 95th percentile for ≥3 consecutive days), heatwave was significantlyassociated with a 56% increased risk of sudden death (95% CI: 31%, 86%). The population-attributable fraction of sudden death due to heatwave exposure was 1.45% (95% CI: 0.97%, 1.90%). Stratified analyses indicated no statistically significant differences in the association between heatwave exposure and sudden death across age or sex subgroups. Conclusion Heatwave exposure was associated with an increased risk of sudden death. Reducing heatwave exposure during summer may help lower the occurrence of sudden death.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

Chinese hamster ovary (CHO) cells are the most established and versatile mammalian expression system for the large-scale production of recombinant therapeutic proteins, owing to their genetic stability, adaptability to serum-free suspension culture, and ability to perform human-like post-translational modifications. More than 70% of biologics approved by the U.S. Food and Drug Administration rely on CHO-based production platforms, underscoring their central role in modern biopharmaceutical manufacturing. Despite these advantages, CHO systems continue to face three persistent bottlenecks that limit their potential for high-yield, reproducible, and cost-efficient production: excessive metabolic burden during high-density culture, heterogeneity of glycosylation patterns, and progressive loss of long-term expression stability. This review provides an integrated analysis of recent advances addressing these challenges and proposes a forward-looking framework for constructing intelligent and sustainable CHO cell factories. In terms of metabolic regulation, excessive lactate and ammonia accumulation disrupts energy balance and reduces recombinant protein synthesis efficiency. Optimization of culture parameters such as temperature, pH, dissolved oxygen, osmolarity, and glucose feeding can effectively alleviate metabolic stress, while supplementation with modulators including sodium butyrate, baicalein, and S-adenosylmethionine promotes specific productivity (qP) by modulating apoptosis and chromatin structure. Furthermore, genetic engineering strategies—such as overexpression of MPC1/2, HSP27, and SIRT6 or knockout of Bax, Apaf1, and IGF-1R—have demonstrated significant improvements in cell viability and product yield. The combination of multi-omics metabolic modeling with artificial intelligence (AI)-based prediction offers new opportunities for building self-regulating CHO systems capable of dynamic adaptation to environmental stress. Regarding glycosylation uniformity, which determines therapeutic efficacy and immunogenicity, gene editing-based glycoengineering (e.g., FUT8 knockdown or ST6Gal1 overexpression) has enabled the humanization of CHO glycan profiles, minimizing non-human sugar residues and enhancing drug stability. Process-level strategies such as galactose or manganese co-feeding and fine control of temperature or osmolarity further allow rational regulation of glycosyltransferase activity. Additionally, in vitro chemoenzymatic remodeling provides a complementary route to construct human-type glycans with defined structures, though industrial applications remain constrained by cost and scalability. The integration of model-driven process design and AI feedback control is expected to enable real-time prediction and correction of glycosylation deviations, ensuring batch-to-batch consistency in continuous biomanufacturing. Long-term expression stability, another critical challenge, is often impaired by promoter silencing, chromatin condensation, and random genomic integration. Molecular optimization—such as the use of improved promoters (CMV, EF-1α, or CHO endogenous promoters), Kozak and signal peptide refinement, and incorporation of chromatin-opening elements (UCOE, MAR, STAR)—helps maintain durable transcriptional activity, while site-specific integration systems including Cre/loxP, Flp/FRT, φC31, and CRISPR/Cas9 can enable single-copy, position-independent gene insertion at genomic safe-harbor loci, ensuring stable, predictable expression. Collectively, this review highlights a paradigm shift in CHO system optimization driven by the convergence of genome editing, synthetic biology, and artificial intelligence. The transition from empirical optimization to rational, data-driven design will facilitate the development of programmable CHO platforms capable of autonomous regulation of metabolic flux, glycosylation fidelity, and transcriptional activity. Such intelligent cell factories are expected to accelerate the transformation from laboratory-scale research to industrial-scale, high-consistency, and economically sustainable biopharmaceutical manufacturing, thereby supporting the next generation of efficient and customizable biologics manufacturing.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

BACKGROUND:The prevalence of osteoporosis is high in postmenopausal women,but muscle mass,grip strength,and how these factors affect osteoporosis are understudied,and the exact link between them has not been clarified.OBJECTIVE:To investigate the correlation between muscle mass,grip strength,appendicular skeletal muscle index and bone mineral density in postmenopausal women with osteoporosis and to assess the potential values of these indices in predicting and diagnosing postmenopausal osteoporosis.METHODS:Eighty-three postmenopausal women were collected from the outpatient clinic of the Third Affiliated Hospital of Guangzhou University of Chinese Medicine from February 2023 to January 2024.General data were collected.Bone mineral density was detected.T-value,muscle mass of each part,grip strength were recorded.The body mass index and appendicular skeletal muscle index were calculated.The patients were categorized into non-osteoporosis group(n=17)and postmenopausal osteoporosis group(n=66)according to T value and fracture history,and were statistically analyzed accordingly.RESULTS AND CONCLUSION:(1)The body mass,body mass index,bone mineral density of the overall lumbar spine,muscle mass and appendicular skeletal muscle index were higher in the non-osteoporosis group than the osteoporosis group(P＜0.05).(2)Muscle mass was positively correlated with bone mineral density of the overall lumbar spine and individual vertebrae(P＜0.05).(3)Multiple stepwise linear regression analysis showed that body mass and grip strength were linearly and positively correlated with muscle mass;body height and muscle mass were linearly and positively correlated with grip strength,and body mass was linearly and negatively correlated with grip strength.Body mass index was linearly and positively correlated with bone mineral density,and age was linearly and negatively correlated with bone mineral density.(4)Analysis by receiver operating characteristic curve showed that:muscle mass(the area under the curve,sensitivity,specificity and critical value of muscle mass were 0.744,76.50％,74.20％and 36.50 kg,respectively,with P=0.002)and appendicular skeletal muscle index(the area under the curve,sensitivity,specificity and critical value of appendicular skeletal muscle index were 0.739,82.40％,62.10％and 5.81 kg/m2,respectively,and P=0.002)had good predictive value for postmenopausal osteoporosis.To conclude,a reduction in muscle mass and appendicular skeletal muscle index can help to predict the risk of postmenopausal osteoporosis,and the possibility of osteoporosis should be taken into account in postmenopausal women when muscle mass is＜36.50 kg or appendicular skeletal muscle index is＜5.81 kg/m2,in order to prevent the occurrence of postmenopausal osteoporosis.

BACKGROUND:The prevalence of osteoporosis is high in postmenopausal women,but muscle mass,grip strength,and how these factors affect osteoporosis are understudied,and the exact link between them has not been clarified.OBJECTIVE:To investigate the correlation between muscle mass,grip strength,appendicular skeletal muscle index and bone mineral density in postmenopausal women with osteoporosis and to assess the potential values of these indices in predicting and diagnosing postmenopausal osteoporosis.METHODS:Eighty-three postmenopausal women were collected from the outpatient clinic of the Third Affiliated Hospital of Guangzhou University of Chinese Medicine from February 2023 to January 2024.General data were collected.Bone mineral density was detected.T-value,muscle mass of each part,grip strength were recorded.The body mass index and appendicular skeletal muscle index were calculated.The patients were categorized into non-osteoporosis group(n=17)and postmenopausal osteoporosis group(n=66)according to T value and fracture history,and were statistically analyzed accordingly.RESULTS AND CONCLUSION:(1)The body mass,body mass index,bone mineral density of the overall lumbar spine,muscle mass and appendicular skeletal muscle index were higher in the non-osteoporosis group than the osteoporosis group(P＜0.05).(2)Muscle mass was positively correlated with bone mineral density of the overall lumbar spine and individual vertebrae(P＜0.05).(3)Multiple stepwise linear regression analysis showed that body mass and grip strength were linearly and positively correlated with muscle mass;body height and muscle mass were linearly and positively correlated with grip strength,and body mass was linearly and negatively correlated with grip strength.Body mass index was linearly and positively correlated with bone mineral density,and age was linearly and negatively correlated with bone mineral density.(4)Analysis by receiver operating characteristic curve showed that:muscle mass(the area under the curve,sensitivity,specificity and critical value of muscle mass were 0.744,76.50％,74.20％and 36.50 kg,respectively,with P=0.002)and appendicular skeletal muscle index(the area under the curve,sensitivity,specificity and critical value of appendicular skeletal muscle index were 0.739,82.40％,62.10％and 5.81 kg/m2,respectively,and P=0.002)had good predictive value for postmenopausal osteoporosis.To conclude,a reduction in muscle mass and appendicular skeletal muscle index can help to predict the risk of postmenopausal osteoporosis,and the possibility of osteoporosis should be taken into account in postmenopausal women when muscle mass is＜36.50 kg or appendicular skeletal muscle index is＜5.81 kg/m2,in order to prevent the occurrence of postmenopausal osteoporosis.

Background/Aims: Liver transplantation (LT) following total hepatectomy is a life-saving treatment for hepatocellular carcinoma (HCC). The HCC recurrence after LT hinders the effectiveness of the procedure. The objective of this study is to develop a pre-operative risk stratification model based on a liquid biopsy. Methods: We conducted a comprehensive multi-omics study of 260 HCC patients from three centers, including clinical data, low-coverage whole-genome sequencing of cell-free DNA (cfDNA) from plasma, as well as whole-exome, single-nucleus RNA, and spatial transcriptomics from matched tumor and non-tumor tissues. Results: We identified cfDNA-derived copy number alteration (CNA) signatures associated with post-transplant recurrence. By integrating cfDNA-derived CNA profiles with single-cell transcriptomic data, we traced recurrence-associated cfDNA to a distinct subpopulation of malignant cells within the primary tumor. These cells were embedded in a pro-metastatic microenvironment of specialized endothelial subtypes and cancer-associated fibroblasts. Notably, most recurrence-associated lesions were detectable in cfDNA prior to liver transplantation (LT). Building on these insights, we developed the ZJU Criteria based on CNA fragments and tumor markers, a pre-LT risk prediction tool that integrates conventional clinical factors with cfDNA-derived CNA signatures, and validated it using internal and independent external cohorts. Conclusion Our findings suggest that post-transplant recurrence commonly originates from advanced subclones that emerge late during tumor evolution. The ZJU Criteria provides an accurate, non-invasive strategy that significantly improves pre-LT risk stratification and clinical decision-making for patients with HCC.

ObjectiveType I interferon (IFN-I) signaling is essential for antiviral innate immunity, yet its sustained or excessive activation contributes to the pathogenesis of several autoimmune diseases and interferonopathies, such as systemic lupus erythematosus and Aicardi-Goutières syndrome. Current strategies targeting this pathway, exemplified by JAK inhibitors, act mainly on downstream signal transduction and provide limited direct control over upstream IFN-I production, while also carrying the risk of broad immunosuppression. Phyllanthus emblica L. has long been used in traditional medicine for inflammatory disorders, but the bioactive constituent responsible for its regulation of IFN-I signaling and the underlying molecular mechanism have not been clearly defined. This study aimed to identify the active anti-inflammatory component of P. emblica and to characterize its mechanism of action on the IFN-I pathway in macrophages. MethodsActive components ofP. emblica and their candidate targets were screened by network pharmacology using the TCMSP and DrugBank databases (oral bioavailability≥30%, drug-likeness≥0.18) and intersected with inflammation-related genes retrieved from public databases. The predicted interaction between EGCG and IFN-I pathway proteins (TBK1, IRF3, STAT1) was evaluated by molecular docking, with BX795 and GSK8612 used as reference TBK1 inhibitors. Mechanistic experiments were performed in THP-1-derived macrophages and primary bone marrow-derived macrophages (BMDM). Upstream signaling was activated by transfection of the nucleic acid analogs poly(I∶C) and poly(dA∶dT) or by lipopolysaccharide (LPS) stimulation, whereas downstream signaling was activated by exogenous IFN-β. An siRNA-mediated TREX1 knockdown model was used to mimic endogenous nucleic acid-driven interferonopathy. Expression of IFN-β1 and interferon-stimulated genes (ISGs) was measured by RT-qPCR, protein phosphorylation by Western blot, and IFN-β secretion by ELISA. Cellular thermal shift assay (CETSA) and drug affinity responsive target stability (DARTS) were used to probe the interactionbetween EGCG and IRF3. ResultsNetwork pharmacology identified (-)-epigallocatechin-3-gallate (EGCG) as a candidate IFN-I-suppressive constituent of P. emblica, with predicted binding to TBK1, IRF3, and STAT1. Molecular docking yielded binding energies of -9.2, -7.2, and -8.2 kcal/mol for TBK1, IRF3, and STAT1, respectively, indicating an affinity for TBK1 comparable to that of the reference inhibitors BX795 (-5.7 kcal/mol) and GSK8612 (-6.4 kcal/mol). EGCG suppressed IFN-β1 and ISG mRNA expression under poly (I∶C), poly (dA∶dT), and LPS stimulation in both THP-1 macrophages and BMDM. At the protein level, EGCG reduced the phosphorylation of TBK1 and IRF3 without affecting the levels of the upstream sensors cGAS and RIG-I, and lowered IFN-β secretion in a concentration-dependent manner. CETSA and DARTS showed that EGCG did not enhance the thermal stability or protease resistance of IRF3, indicating that its effect on IRF3 is indirect. Following IFN-β stimulation, prolonged EGCG treatment reduced STAT1 phosphorylation in a time-dependent manner without an apparent change in IRF9, and partially attenuated ISG transcription; this effect was not monotonicly concentration-dependent, and CXCL10 showed the most consistent suppression. In TREX1-knockdown cells, the elevated mRNA levels of ISG15, ISG56, and CXCL10 were reduced by EGCG. ConclusionEGCG suppresses IFN-I responses by concurrently inhibiting TBK1-IRF3-dependent IFN‑β production and JAK-STAT1-mediated downstream transcription. These in vitro findings provide a mechanistic basis for the anti-inflammatory use of P. emblica in traditional medicine and identify EGCG as a candidate for further evaluation in interferon-driven autoimmune disease models.

ObjectiveChinese patent medicines for cardiovascular and cerebrovascular diseases are diverse and complex in their efficacy. The traditional classification method based on efficacy categories has certain limitations and cannot meet the clinical needs for individualized drug selection and variety comparison. This article， based on the formulation compatibility analysis technology of "Tangye Jingfa Tu"， clarifies the composition and efficacy characteristics of common Chinese patent medicines used for cardiovascular and cerebrovascular diseases， providing support for the precise selection of these medicines. MethodsFifty-six representative Chinese patent medicines， covering all the efficacy subcategories of "stasis-resolving agents" in the National Basic Medical Insurance， Work Injury Insurance， and Maternity Insurance Drug Catalogue （2023） （more than 50% of the total）， were selected for the study. Within the knowledge system of "Tangye Jingfa Tu"， the compatibility structure of herbal flavors and the proportion structure of herbal quantities for each Chinese patent medicine were determined. The correlation between these structures and the efficacy categories was analyzed to identify the similarities and differences among the selected Chinese patent medicines. Additionally， the efficacy was reclassified and compared according to the theoretical framework of tonifying and purging methods of five Zang organs in the "Tangye Jingfa Tu". ResultsThe representative Chinese patent medicines included in the analysis were Shexiang Baoxin pills， Danshen tablets， Qili Qiangxin capsules， Breviscapine tablets， etc.， covering all the efficacy subcategories of "stasis-resolving agents". Among the 56 representative Chinese patent medicines， salty flavor was the most common （48）， followed by pungent （33）， and sweet （26）. According to the dominant herbal flavor， salty flavor was the most common （37）， followed by pungent （9）， and sour （5）. According to the dominant herbal quantity， salty flavor was the most common （27）， followed by sour （7）， and pungent （5）. Furthermore， Chinese patent medicines with different efficacy subtypes showed different flavor characteristics. For example， most Qi-invigorating and blood-activating agents contained sweet drugs for tonifying the spleen （9/10）， most Qi-moving and blood-activating agents contained pungent drugs for tonifying the liver （7/8）， and all kidney-invigorating and blood-activating agents contained bitter drugs for tonifying the kidneys （6/6）. However， the efficacy classification of individual medicines did not always align with the compatibility characteristics of their formulas， as seen with Dengyin Naotong capsules. ConclusionThe formulations of Chinese patent medicines for cardiovascular and cerebrovascular diseases predominantly feature salty， sour， and pungent flavors， which largely conform to the therapeutic principles of "nourishing the heart with salt and soothing the heart with sour" and the liver-heart， heart-spleen mother-child treatment relationship shown in the "Tangye Jingfa Tu". Using the "Tangye Jingfa Tu" framework to conduct research on the structure and efficacy characteristics of Chinese patent medicines is objective and effective.