OBJECTIVES: We aimed to compare the apical sealing properties of three endodontic sealers, namely, C-Root SP (C-R), iRoot SP, and GuttaFlow Bioseal (GFB) in vitro. METHODS: Eighty-two single-rooted premolars and anterior teeth were prepared by using M3 machine with nickel-titanium file and randomly divided into six experimental groups (n=12) and two control groups (n=5). Group A1: single-cone technique (SC)+C-R; group B1: SC+iRoot SP; group C1: SC+GFB; group A2: single-cone with ultrasonic activation (SU)+C-R; group B2: SU+iRoot SP; group C2: SU +GFB; group D: positive control group, and group E: negative control group. Dye penetration length and lateral root canal filling in each group were measured by dye penetration test. A scanning electron microscope (SEM) was used to observe the interface between gutta pertscha, root canal sealer, and dentin wall. Dye penetration length was measured and analyzed by Kruskal-Wallis test, and data on lateral root canal filling were evaluated using Chi-square. RESULTS: The dye penetration length in group A1 was lower than that in groups C1 and A2 (P<0.05) but was not significantly different from the other groups (P>0.05). Lateral root canal filling was not significantly different among all groups (P>0.05). SEM showed that GFB was slightly better than C-R and iRoot SP in binding to gutta pertcha and dentin wall. CONCLUSIONS GFB, C-R, and iRoot SP demonstrate excellent apical sealing ability. Under the conditions tested in this study, SU did not yield significantly improve the apical sealing ability of the three root canal sealers.
Root Canal Filling Materials/chemistry* ; Humans ; Gutta-Percha ; Microscopy, Electron, Scanning ; Root Canal Obturation/methods* ; Ceramics ; Dimethylpolysiloxanes ; Drug Combinations

OBJECTIVE: To evaluate the filling quality of single cone obturation in root canal model with irregular structure (Hus&Kim Ⅴ, Yin Ⅱ-type isthmus) which established by 3D printing technology using slices and radiographic methods, in order to provide reference for clinical practice. METHODS: (1) Extracted fresh premolars with Hus&Kim Ⅴ and Yin-type Ⅱ isthmus were collected and scanned by cone-beam computed tomography (CBCT), then standard root canal models were designed and printed. Rhodamine B staining and bias fitting were used to verify the availability of the models. (2) 30 root canal models were randomly divided into 3 groups according to different filling methods (n=10). CONTROL GROUP: vertical compaction obturation; Experimental group 1: single cone obturation with 0.06-taper cone (30#); Experimental group 2: single cone obturation with 0.04-taper cone (35#), GuttaFlow 2 as canal sealers. Slices were taken at 2, 4, 6, and 8 mm from the root apex in the direction perpendicular to the long axis of the root and observed under a stereomicroscope to calculate the percentage of filling area (PAV), percentage of gutta-percha-filled area (PGFA), percentage of sealer filled area (PSFA). (3) On the basis of the above results, two groups (n=4) were selected to further analyze the filling quality by micro-computed tomography (Micro-CT), the filling volume of main root canal and the isthmus were obtained, and the percentage of filling volume (PFV) was calculated. Two-way ANOVA was used to evaluate the differences between the groups, and Tukey' s multiple comparison was used to compare the data between the groups and within the groups. RESULTS: (1) Rhodamine B staining solution could overflow the apical foramen, and the main root canal system and the isthmus area were stained, showed no remnants of support material. The 3D standard deviation of the printed model data was 0.03 mm, and the average fitting distance was 0.02 mm. (2) The PFA of the two experimental groups were both significantly lower than that of the control group (F=45.04, P < 0.01). There was no statistical difference of the PFA at apical 2 and 4 mm between the two experimental groups (P>0.01), but at the middle and coronal portions of the root canal (6, 8 mm), the PFA of the experimental group 1 was higher than that of the experimental group 2 (P < 0.01). PFA in the apical 2, 4 mm of the two experimental groups were both lower than that in the middle and coronal portions 6, 8 mm of the canal (P < 0.01). There was no difference in the PGFA and PSFA between the two experimental groups at the apical 2, 4 mm (F=2.383, P>0.01). (3) The results of Micro-CT showed that the PFV of the experimental group 1 was statistically different with the control group (F=47.33, P < 0.01). The PFV of the experimental group 1 was 54.33%±4.35% in the isthmus and 78.31%±4.21% in the main root canal, which were both lower than the PFV of the control group of 76.48%±4.89% (isthmus) and 86.90%±3.29% (main root canal, P < 0.01). The PFV of the main root canal in the experimental group 1 was higher than that in the isthmus (P < 0.01), while there was no difference between the isthmus and the main root canal in the control group (P>0.01). CONCLUSION In the irregular root canal structure with isthmus, using large-taper gutta-percha can improve the filling quality of the middle and upper part of the canal, but the percentage of filling volume in the isthmus is lower than that of the main canal, and more technical improvements are needed.
Humans ; Root Canal Obturation/methods* ; Cone-Beam Computed Tomography ; Root Canal Filling Materials ; Dental Pulp Cavity/diagnostic imaging* ; Printing, Three-Dimensional ; In Vitro Techniques ; Gutta-Percha ; Bicuspid

OBJECTIVES: This study aimed to evaluate the filling effects of three biomaterial root canal sealers [iRoot SP, C-Root SP, and GuttaFlow Bioseal (GFB)] by using Micro-CT. METHODS: Sixty single-canal detached premolars were selected. After crown amputation, their uniform working length was set at 12 mm and prepared to a 06 taper 30# with M3 nickel-titanium file. The samples were randomly divided into six groups with different sealers and obturation techniques: iRoot SP+single-cone technique (SC), C-Root SP+SC, GFB+SC, iRoot SP+single cone-mediated ultrasonic technique (SU), C-Root SP+SU, and GFB+SU. Samples were scanned by Micro-CT, and the total and segmented filling rates were calculated with Mimics 22.0 software after 3D reconstruction. RESULTS: The overall filling rate of the three biomaterial root canal sealers was higher than 90%. The overall and coronal third and middle third segment filling rate of groups iRoot SP+SC, C-Root SP+SC was higher than that of group GFB+SC (P<0.01), with no significant difference between groups iRoot SP+SC and C-Root SP+SC (P>0.05). On the apical third, no significant difference was found among each group (P>0.05). The overall and segment filling rate of groups iRoot SP+SU and C-Root SP+SU was higher than that of GFB+SU (P<0.01), with no significant difference between groups iRoot SP+SU and C-Root SP+SU (P>0.05). The filling rate of the apical 1/3 of group C-Root+SC was lower than that of group C-Root+SU (P<0.01), and the filling rate of the coronal 1/3 of group GFB+SC was higher than that in the GFB+SU (P<0.01). Nevertheless, no significant difference was found in other filling rate of two obturation techniques (P>0.05). CONCLUSIONS The overall filling rate of the three biomaterial root canal sealers using SC and SU are satisfactory. iRoot SP and C-Root SP have similar filling rates, which are significantly higher than that of GFB. C-Root SP combined with SU technique can improve the filling quality of the root apical.
Root Canal Filling Materials ; X-Ray Microtomography ; Humans ; Root Canal Obturation/methods* ; Gutta-Percha ; Dimethylpolysiloxanes ; Drug Combinations ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid

Conservative Treatment ; Dens in Dente/therapy* ; Humans ; Incisor ; Periapical Periodontitis/therapy* ; Root Canal Filling Materials

Compared with cold lateral condensation and continuous wave of condensation which are classically used in clinical, newly emerging single-cone obturation technique is easy-to-operate as well as time-saving. Especially when combined with bioceramic root canal sealers of improved physicochemical and biological properties, single-cone obturation technique showed satisfactory short-term outcomes in clinical observations. However, difficulties still exist in avoiding the root canal overfilling and in operating the retreatment. Besides, the long-term effects of single-cone obturation with bioceramic sealers still remain unclear. This article makes an overview on the history and development of single-cone obturation ,and provides analysis of its pros and corns. Furthermore, we would also like to summarize its clinical application and look into its future improvements.
Epoxy Resins/chemistry* ; Gutta-Percha/chemistry* ; Retreatment ; Root Canal Filling Materials/therapeutic use* ; Root Canal Obturation/methods* ; Root Canal Therapy

OBJECTIVE: To evaluate the clinical effect of root canal obturation therapy using cold flowable gutta-percha on young permanent teeth after apexification. METHODS: Ninety cases of young permanent teeth with pulp necrosis or periapical periodontitis treated by apexification were randomly divided into two groups. The cases in each group were divided into single root canal and multiple root canal according to the number of the root canal, and divided into classifications Ⅰ, and Ⅱ/Ⅲ/Ⅳ according to Frank's classification of root development after apexification. Cold flowable gutta-percha and warm gutta-percha obturation techniques were used for root canal obturation of the two groups. The operation time was recorded, and the patients' therapy pain degree was evaluated by visual analog scale (VAS) immediately after operation. Periapical X-ray was performed after operation to evaluate the effect of the root canal filling. The total length of the root was divided into equal three parts on the X-ray film, and three-dimensional tightness of the apical, middle, and coronal region of the root canals were statistically analyzed respectively. Clinical examinations and X-ray examination were performed 6 and 12 months after the operation to evaluate the treatment success rate. RESULTS: The operation time of cold flowable gutta-percha group was significantly lower than that of the control group, which were 51 s and 74 s (P < 0.05); The percentages of pain and discomfort in the two groups were 26.67% and 40.00%, respectively. There were two cases of underfilling and no overfilling in both groups. The percentages of proper filling and tight three-dimensional obturation in the experimental and control groups were 71.11% and 60.00% respectively; and the percentages of tight three-dimensional obturation in the apical third areas were 86.67% and 66.67%, the difference was significant (P < 0.05). There was no significant difference in the three-dimensional tightness between the two groups in the middle and coronal third areas. The percentages of tight three-dimensional obturation in classification Ⅰ groups were 86.67%, 83.33%, 93.33% and 76.67%, 90.00%, 96.67% in experimental and control group, respectively; The percentages of classification Ⅱ/Ⅲ/Ⅳ groups were 86.67%, 86.67%, 100.00% and 46.67%, 86.67%, 100.00%, respectively, and the difference was significant (P < 0.05). There were no apical lesions that occurred in either group during the one-year review period. CONCLUSION The application of cold flowable gutta-percha on young permanent teeth root canal obturation after apexification can achieve good obturation effect. The root obturation effect in the apical third area is significantly better than that of warm gutta-percha obturation techniques. Cold flowable gutta-percha can shorten the clinical treatment time and ameliorate the patients' therapy comfort.
Apexification ; Dental Pulp Cavity ; Gutta-Percha ; Humans ; Radiography ; Root Canal Filling Materials ; Root Canal Obturation ; Root Canal Preparation

OBJECTIVES: This study aimed to evaluate the efficacy of three methods in root canal retreatment to remove the filling material in the root canals. METHODS: Ninety tooth roots filled by gutta percha or plasticized material (n=45, each) were randomly divided into three groups (n=15). WaveOne (WaveOne group), 1^#P drill+WaveOne (1^#P+WaveOne group), and ultrasound P5 working end ET25+ProTaper Universal (P5+ProTaper Universal group) were used to remove the root canal filling material and prepare for root canal. The operating time of each canal was recorded and the percentage of residual filling material area was measured on the root canal wall of the mesial and distal dissected root section. The degree of deviation of the root canal after operation was measured for the root samples filled by gutta percha. RESULTS: The type of root filling material and the method of root canal retreatment had no significant effect on the percentage of residual area of the filling material (P>0.05). However, the remaining filling material area of apical 1/3 of the root canal was significantly higher than that of cervical 1/3 of the root canal (P<0.05). The average operating times for removing gutta-percha or plasticized material in the W and 1^#P+WaveOne groups were significantly less than that in the P5+ProTaper Universal group (P=0.000). The root canal retreatment methods had no significant effect on the curvature of the root canal (P=0.650). CONCLUSIONS WaveOne single file's cleaning ability and center positioning ability were similar to those of ProTaper Universal. Moreover, WaveOne can be independently used for most root canals without a pathway when removing the root canal fillings, thereby simplifying the process of root canal retreatment.
Equipment Design ; Gutta-Percha ; Nickel ; Root Canal Filling Materials ; Root Canal Preparation/methods* ; Titanium

OBJECTIVES: The safety of root canal filling with 200 °C hot gutta-percha was investigated to study the effect of continuous wave technique combined with high-temperature injectable gutta-percha condensation technique on the surface temperature of periodontal tissue. METHODS: CT technique and Mimics, Geomagic, and Solidworks software were utilized to build the entity models of alveolar bone, dentin and root canal, periodontal ligament, and blood flow, respectively, which were then assembled in Solidworks into a finite element model of tooth with blood flow. By utilizing ABAQUS collaborative simulation platform, fluid-structure coupling was analyzed on the whole process of root canal filling. Consequently, the surface temperature of the periodontal tissue was obtained. RESULTS: In the absence of blood flow, the temperature of the periodontal ligament surface reached 50.048 ℃ during root canal filling with 200 ℃ gutta-percha. Considering blood flow, the temperature of periodontal ligament surface was 39.570 ℃. CONCLUSIONS The temperature of the periodontal ligament surface increased when the continuous wave root canal was filled with 200 ℃ gutta-percha, and the periodontal tissue was not damaged.
Dental Pulp Cavity ; Finite Element Analysis ; Gutta-Percha ; Hot Temperature ; Humans ; Periodontium ; Root Canal Filling Materials ; Root Canal Obturation ; Temperature

OBJECTIVES: To investigate the outcome of endodontic microsurgery and analyze the potential prognostic factors, and to evaluate the value of surgical classification by Kim and Kratchman. METHODS: Collecting clinical examination and radiographical examination of endodontic microsurgery cases (which were followed up at least 1 year), which were classified according to Kim and Kratchman, and we analyzed the outcome of endodontic microsurgery and its potential prognostic factors. RESULTS: 302 patients (400 teeth) who received endodontic microsurgery were included. The one year success rate of endodontic microsurgery was 94.25%. Different classification had significant influences on the outcome of endodontic microsurgery ( CONCLUSIONS Endodontic microsurgery is an effective treatment method for saving affected teeth, and it can get a good result. Tooth position and classification are the potential prognostic factors. The surgical classification of Kim and Kratchman can help to predict the outcome of endodontic microsurgery.
Humans ; Microsurgery ; Retrospective Studies ; Root Canal Filling Materials ; Root Canal Therapy ; Treatment Outcome

OBJECTIVES: This study evaluated the bond strength of various fiberglass post cementation techniques using different resin-based composites. MATERIALS AND METHODS: The roots from a total of 100 bovine incisors were randomly assigned to 5 treatment groups: G1, post + Scotchbond Multi-Purpose (SBMP) + RelyX ARC luting agent; G2, relined post (Filtek Z250) + SBMP + RelyX ARC; G3, individualized post (Filtek Z250) + SBMP; G4, individualized post (Filtek Bulk-Fill) + SBMP; G5, individualized post (Filtek Bulk-Fill Flow) + SBMP. The samples were subjected to the push-out (n = 10) and pull-out (n = 10) bond strength tests. Data from the push-out bond strength test were analyzed using 2-way analysis of variance (ANOVA) with the Bonferroni post hoc test, and data from the pull-out bond strength test were analyzed using 1-way ANOVA. RESULTS: The data for push-out bond strength presented higher values for G2 and G5, mainly in the cervical and middle thirds, and the data from the apical third showed a lower mean push-out bond strength in all groups. No significant difference was noted for pull-out bond strength among all groups. The most frequent failure modes observed were adhesive failure between dentine and resin and mixed failure. CONCLUSIONS: Fiberglass post cementation using restorative and flowable bulk-fill composites with the individualization technique may be a promising alternative to existing methods of post cementation.
Adhesives ; Cementation ; Composite Resins ; Dental Cements ; Dentin ; In Vitro Techniques ; Incisor ; Root Canal Filling Materials ; Tooth Root