Objective:To investigate the clinicopathological features and differential diagnosis of male genital system lympho-ma(MGSL).Methods:We retrospectively analyzed the clinicopathological and immunophenotypic features and prognosis of 80 ca-ses of MGSL.Results:The onset age of the MGSL patients ranged from 4 to 85(median 62)years old.All the cases showed non-specificity of the imaging features and clinical manifestations.MGSL was located mainly in the testis(n=66),followed by the pros-tate(n=7),epididymis(n=3),scrotum(n=3)and penile glans(n=1).Diffused large B cell lymphoma(DLBCL)was the most common pathological type(n=62),next came extranodal marginal zone lymphoma of mucosa-associated lymphoid tissue(MALT)(n=7)and other rare types(n=12).During the 1-112-month follow-up of 10 of the 19 patients,1 died at 1 month af-ter diagnosed with prostatic B-lymphoblastic lymphoma(B-LBL)and another 1 died at 50 months after diagnosed with testicular DLBCL.Conclusion:MGSL is rare clinically,mainly of the DLBCL type pathologically,lacking specificity in clinical symptoms and imaging manifestation.The definite diagnosis of the malignancy depends on histopathology combined with related molecular exami-nation and immunohistochemical labeling,and R-CHOP chemotherapy is the first choice for its treatment.

BACKGROUND:Percutaneous retrograde screws and minimally invasive percutaneous plates are extensively used in the treatment of unilateral pubic ramus fractures.However,the above internal fixations have the disadvantages of mistakenly penetrating the hip joint and damaging the medial pelvic trophoblastic artery.A new type of retrograde superior pubic ramus intramedullary nail offers advantages,such as fewer radiographic exposures and shorter surgery times,but the validation of the biomechanical properties of the three endoprostheses is lacking.OBJECTIVE:To compare the biomechanical differences post-treatment of upper and lower pubic ramus fractures using percutaneous retrograde screws,minimally invasive percutaneous plates,and retrograde superior pubic ramus intramedullary nail under various conditions through finite element analysis.METHODS:Pelvic CT data were collected from one volunteer and imported into Mimics 20,Geomagic Wrap 2021,and SolidWorks 2019 to create geometric models of three types of internal fixation for treating unilateral pubic ramus fractures:hollow screw group,plate group,and intramedullary nail group.Each model was imported into Ansys 2022 software,where it was set up in vertical,book-opening,and shear conditions for preprocessing and calculation to compare and analyze the mechanical stability of the implants.RESULTS AND CONCLUSION:(1)In vertical conditions,the biomechanical stability of the hollow screw treatment for unilateral pubic fractures was superior to that of the steel plate and intramedullary nail,with the smallest peak stress in the implant,which was four times lower compared to the other two groups.(2)In book-opening conditions,the steel plate treatment for unilateral pubic fractures showed better biomechanical stability,particularly in reducing stress at the fracture ends of the upper pubic branch,with stress values five times higher in the other two groups.(3)In shear conditions,the intramedullary nail treatment for unilateral pubic fractures exhibited good biomechanical stability,maintaining the best pelvic displacement,with a 25％greater displacement observed in the other two groups.(4)These findings reveal the biomechanical differences of different implants:the peak stress of implants is the smallest under vertical working conditions with percutaneous retrograde screws.Minimally invasive percutaneous plates reduce the stress at the broken end of superior pubic branch under open-book working condition.Retrograde superior pubic ramus intramedullary nail of superior pubic branch maintains pelvic displacement under shear working condition.The surgeon can combine the biomechanical differences of the implants with the actual situation of pubic injury in clinical practice to make the best implant treatment.

BACKGROUND:Percutaneous retrograde screws and minimally invasive percutaneous plates are extensively used in the treatment of unilateral pubic ramus fractures.However,the above internal fixations have the disadvantages of mistakenly penetrating the hip joint and damaging the medial pelvic trophoblastic artery.A new type of retrograde superior pubic ramus intramedullary nail offers advantages,such as fewer radiographic exposures and shorter surgery times,but the validation of the biomechanical properties of the three endoprostheses is lacking.OBJECTIVE:To compare the biomechanical differences post-treatment of upper and lower pubic ramus fractures using percutaneous retrograde screws,minimally invasive percutaneous plates,and retrograde superior pubic ramus intramedullary nail under various conditions through finite element analysis.METHODS:Pelvic CT data were collected from one volunteer and imported into Mimics 20,Geomagic Wrap 2021,and SolidWorks 2019 to create geometric models of three types of internal fixation for treating unilateral pubic ramus fractures:hollow screw group,plate group,and intramedullary nail group.Each model was imported into Ansys 2022 software,where it was set up in vertical,book-opening,and shear conditions for preprocessing and calculation to compare and analyze the mechanical stability of the implants.RESULTS AND CONCLUSION:(1)In vertical conditions,the biomechanical stability of the hollow screw treatment for unilateral pubic fractures was superior to that of the steel plate and intramedullary nail,with the smallest peak stress in the implant,which was four times lower compared to the other two groups.(2)In book-opening conditions,the steel plate treatment for unilateral pubic fractures showed better biomechanical stability,particularly in reducing stress at the fracture ends of the upper pubic branch,with stress values five times higher in the other two groups.(3)In shear conditions,the intramedullary nail treatment for unilateral pubic fractures exhibited good biomechanical stability,maintaining the best pelvic displacement,with a 25％greater displacement observed in the other two groups.(4)These findings reveal the biomechanical differences of different implants:the peak stress of implants is the smallest under vertical working conditions with percutaneous retrograde screws.Minimally invasive percutaneous plates reduce the stress at the broken end of superior pubic branch under open-book working condition.Retrograde superior pubic ramus intramedullary nail of superior pubic branch maintains pelvic displacement under shear working condition.The surgeon can combine the biomechanical differences of the implants with the actual situation of pubic injury in clinical practice to make the best implant treatment.

Objective:To investigate the biomechanical stabilities of different internal screw fixations for Sanders type ⅡB calcaneal fractures using finite element analysis.Methods:Based on the CT scan data of a male volunteer's calcaneus (26 years old, 173 cm tall, weighing 70 kg), a three-dimensional finite element model of the calcaneus was established using digital medical software such as Mimics 22.0, Geomagic 12.0, Solidworks 2019, and ANSYS Workbench 2022. A three-dimensional finite element model of Sanders type ⅡB calcaneal fracture was also established. The following 3 kinds of screws were used: ① longitudinal screws: from the calcaneal tuberosity to the anterior part; ② transverse screws: from the lateral wall of the calcaneus to the sustentaculum tali; ③ vertical screws: from the base of the calcaneus to the talar dome, perpendicular to the posterior articular surface. The scheme of screw configuration was as follows: the longitudinal screws were divided into the upper, middle, and lower groups based on their entry points from the upper, middle, and lower parts of the calcaneal tuberosity. Based on different configurations (double transverse screws + single vertical screw, single transverse screw + single vertical screw, double transverse screws without a vertical screw, and single transverse screw without a vertical screw) 4 subgroups were further subdivided, resulting in a total of 12 models (a, b, c, d, e, f, g, h, i, j, k, l). Forces of 420 N and 200 N were applied to the posterior and middle subtalar joints, respectively, to simulate the load on the calcaneus during single-leg standing in adults. In each model, total deformation displacement, relative displacement of the sustentaculum tali fracture gap, relative displacement of the anterior fracture gap, relative displacement of the articular surface fracture gap, peak stress at the fracture ends and peak screw stress were analyzed.Results:The total deformation displacement was the lowest in models i and j, while models k and l exhibited the highest deformation displacement. The maximum deformation values in the remaining models varied only slightly. The average relative displacement of the sustentaculum tali fracture gap was the lowest in the upper group (0.27 mm) and relatively higher in the lower group, with the greatest variation seen in models k and l. The average relative displacement of the anterior fracture gap was the smallest in the lower group (0.16 mm), with models i and k performing the best. The relative displacement of the articular surface fracture gap remained at a low level across all models. The upper group had the lowest average peak stress at the fracture ends (60.20 MPa), while the middle and lower groups had similar values (103.88 MPa and 99.76 MPa, respectively). The upper group had the lowest average screw stress peak value (222.77 MPa), whereas models k and l in the lower group had the highest stress peaks, reaching 331.48 MPa and 349.82 MPa, respectively.Conclusions:Model i (inferior longitudinal screw + double transverse screws + single vertical screw) can be recommended in clinic because it demonstrates balanced performance in displacement and stress and a notable advantage in reducing overall deformation displacement and anterior fracture gap displacement. As longitudinal, vertical, and transverse screws each play their distinct role in calcaneal fracture fixation, surgeons should select an appropriate screw configuration based on the patient's needs.

Objective:To analyze the clinical symptoms and epidemiological characteristics of patients with tsutsugamushi disease (TD) in Utica County, Shiyan City, providing reference for scientific prevention and control of TD.Methods:The information of 57 TD patients admitted to the Department of Infectious Diseases of the People's Hospital of Utica County in Shiyan City from January to December 2022 was collected, including age, gender, occupation, clinical manifestations (tarsus or chigger, high fever, rash and accompanying syndromes), laboratory and imaging test results, and field work and travel history. Blood samples and body crusts were collected, and enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR) were used to detect antibodies against Orientia tsugamushi (Ot-Ab-IgM) and Orientia tsutsugamushi (Ot). The scores of each patient were calculated using the TD Diagnostic Scale. A score of ≥8.5 was considered a clinical diagnosis of TD. According to the number of system functional damages (0, 1, 2, ≥3), 57 patients were divided into 4 groups, A, B, C, and D, TD was analyzed for system functional damages of each system.Results:Among the 57 TD patients, 26 (45.61%) were male and 31 (54.39%) were female, and the proportion of patients aged 40 - 79 years was 92.98% (53/57); farmers accounted for 89.47% (51/57). May was the peak of TD incidence, with 19 cases, which accounted for 33.33% (19/57) of the total number of patients affected that year. Fifty-four patients had a history of fieldwork or field trips before the onset of the disease. The incidence of high fever in 57 TD patients was 100.00%(57/57), the detection rate of body scorch or chiggers was 80.70% (46/57), and the incidence rate of rash was 98.25% (56/57); the incidence rate of tsutsugamushi disease triad (accompanied by scabs, high fever, and rash) was 80.70% (46/57); the incidence of eosinophil decline was 100.00%(57/57), and 77.19% (44/57) of TD patients experienced multiple-system functional damage (MSFD). The TD score diagnostic scale for 57 patients ranged from 8.5 to 10.5 points. After being hospitalized for 1 - 5 days, all TD patients experienced a decrease in body temperature to the normal range, and the damage to various systems functional gradually recovered.Conclusions:TD has become one of the most common natural infectious diseases in Utopia County, Shiyan City, Hubei Province. The patients are mainly middle-aged and elderly people, and the triple syndrome is a typical clinical manifestation. Asymptomatic injuries to the blood system, liver and kidneys are the most common.

Autophagy often occurs after cells are attacked by oxidative stress, where damaged structures are phagocytic and degraded into nutrients, thereby reducing oxidative damage, promoting the survival of cancer cells and reducing the therapeutic effect of photodynamic therapy (PDT). However, excessive activation of autophagy can promote cell apoptosis. In this paper, the photosensitizer pyropheophorbide-a (Ppa) was used to produce a large amount of reactive oxygen species (ROS) to achieve the effect of killing cancer cells. At the same time, icaritin (Ica), an autophagy inducer, was used to over-activate autophagy, which transformed the protection of cancer cells into the promotion of cancer cell apoptosis, so as to improve the effect of photodynamic therapy. In this study, the interaction force between Ica and Ppa was exploited to successfully construct a self-assembled nanomedicine IP with good stability and high drug load. The synthesis method is simple, through using the drug itself as a carrier, and the loading capacity (LA) of Ica and Ppa can be increased to 83.53% and 16.45% without introducing potential biosafety risks of nanocarriers. Compared with free Ppa, self-assembled nanomedicine IP showed superior performance in cellular uptake and reactive oxygen species production. In addition, the self-assembled nanomedicine IP can reverse the protective autophagy induced by PDT by activating the autophagy of tumor cells, and facilitate apoptosis and antitumor coordination, which significantly improves the antitumor activity of PDT.

Aim To study the anti-inflammatory activ¬ity of diterpenes from Tripterygium wilfordii on lipopo- lysaccharide ( LPS)-induced macrophage and its mech¬anism. Methods MTT assay was used to detect the cytotoxicity of compounds. The Griess method was used to detect the NO on LPS-induced RAW264. 7 cells. ELISA was applied to determine the contents of inter- leukin 6 (IL-6) , tumor necrosis factor a ( TNF-a ) , interleukin lp (IL-lfj) and interleukin 18 (IL-18) in cell culture supernatant. Western blot was used to de¬tect IkBcx, .INK, ERK, p38, STAT3 and their phos-phorylation in LPS-induced RAW264.7, as well as the effect on COX-2, iNOS, NLRP3, caspase-1 , cleaved- caspase-1. Flow cytometry was employed to detect the effects of compounds on the phagocytosis of RAW 264. 7 cells. Results Hypoglicin II (1) and ent-pimara-8 (14) , 15-diene-19-ol (6) , two diterpenoid compounds from Tripterygium wilfordii could effectively inhibit the expression of inflammatory mediators ( COX-2 and iN- OS) and inflammatory cytokines (IL-6, IL-lp, IL- 18) in LPS-induced RAW264. 7 cells. Further re¬search found that the phosphorylation of IkBcx , JNK, ERK, P38, STAT3 and NLRP3 was all inhibited; however, there was no significant effect on the expres¬sion of IkBcx, JNK, ERK, P38 and STAT3. At the same time, they also inhibited the phagocytosis of mac-rophages. Conclusions The anti-inflammatory mecha¬nism of Tripterygium wilfordii diterpenoids 1 and 6 might be through inhibiting the production of NLRP3 inflammatory bodies, inflammatory mediators (COX-2 and iNOS) and inflammatory cytokines (IL-6, IL-lp and IL-18) , which is closely related to inhibiting the activation of MAPK, NF-kB and STAT3 pathway.

Objective To compare the measurement differences between the skull 3D printed model and the real specimen under different CT scan slice thicknesses, and to explore the effect of slice thickness on the accuracy of the 3D printed model. Methods Eight normal skull specimens (marked as Nos. f-8) (group N) were used for CT scanning with different slice thicknesses, specifically 0.625 mm (group A),1.25 mm (group B) , and 2.5mm (group C) ,3.75 mm (group D) , and 5 mm (group E) , and then earned out 3D reconstruction and 3D printing respectively, and compared the anatomical reduction degree of the foramen magnum diameter, anterior clinoid distance, and butterfly wing distance of the 3D printed skull model. Results The reduction degree of anatomical structure of 3D printed skull model decreased with the increase of CT slice thickness. There was no significant difference in the accuracy of 3D model among groups A, B and C (P >0.05 ) . There was a high correlation between group A, B and C and group N ( P < 0 .05 ).The size indexes and statistical values of group A, B and C were similar. Conclusion CT slice thickness has a significant effect on the accuracy and reduction of the 3D printed skull model. The 3D printed model with thin slice data (0.625 mm,1.25 mm,2.5 mm) has higher accuracy and less difference.

OBJECTIVES: To investigate the clinical treatment outcomes and the changes of the outcomes over time in extremely preterm twins in Guangdong Province, China. METHODS: A retrospective analysis was performed for 269 pairs of extremely preterm twins with a gestational age of <28 weeks who were admitted to the department of neonatology in 26 grade A tertiary hospitals in Guangdong Province from January 2008 to December 2017. According to the admission time, they were divided into two groups: 2008-2012 and 2013-2017. Besides, each pair of twins was divided into the heavier infant and the lighter infant subgroups according to birth weight. The perinatal data of mothers and hospitalization data of neonates were collected. The survival rate of twins and the incidence rate of complications were compared between the 2008-2012 and 2013-2017 groups. RESULTS: Compared with the 2008-2012 group, the 2013-2017 group (both the heavier infant and lighter infant subgroups) had lower incidence rates of severe asphyxia and smaller head circumference at birth (P<0.05). The mortality rates of both of the twins, the heavier infant of the twins, and the lighter infant of the twins were lower in the 2013-2017 group compared with the 2008-2012 group (P<0.05). Compared with the 2008-2012 group, the 2013-2017 group (both the heavier infant and lighter infant subgroups) had lower incidence rates of pulmonary hemorrhage, patent ductus arteriosus (PDA), periventricular-intraventricular hemorrhage (P-IVH), and neonatal respiratory distress syndrome (NRDS) and a higher incidence rate of bronchopulmonary dysplasia (P<0.05). CONCLUSIONS There is a significant increase in the survival rate over time in extremely preterm twins with a gestational age of <28 weeks in the 26 grade A tertiary hospitals in Guangdong Province. The incidences of severe asphyxia, pulmonary hemorrhage, PDA, P-IVH, and NRDS decrease in both the heavier and lighter infants of the twins, but the incidence of bronchopulmonary dysplasia increases. With the improvement of diagnosis and treatment, the multidisciplinary collaboration between different fields of fetal medicine including prenatal diagnosis, obstetrics, and neonatology is needed in the future to jointly develop management strategies for twin pregnancy.
Bronchopulmonary Dysplasia/epidemiology* ; Female ; Gestational Age ; Humans ; Infant ; Infant, Extremely Premature ; Infant, Newborn ; Pregnancy ; Respiratory Distress Syndrome, Newborn/epidemiology* ; Retrospective Studies ; Treatment Outcome

Objective: To study the clinical pathological characteristics, immunophenotype, molecular changes and prognosis of the papillary renal neoplasm with reverse polarity (PRNRP). Methods: Nine cases of PRNRP, diagnosed from 2013 to 2019, were retrieved from the Department of Pathology of Nanjing Jinling Hospital, Nanjing University School of Medicine. Histomorphology, immunophenotype and molecular genetics were analyzed with review of the literatures. Results: There were five male and four female patients, aged from 49 to 70 years, with an average age of 60.1 years. During a mean follow-up of 29 months, one patient died for other cause, and the others survived without disease. Microscopically, the tumor cells arranged in papillary structure with a fibrovascular core, the surface of which was covered with a single layer of cuboidal or columnar cells. The most prominent feature was that the tumor nuclei located at the top of the cytoplasm far from the basement membrane, and they were monotonous in size and arranged neatly with no or few nucleoli. Immunohistochemically, all nine cases of PRNRP showed diffuse positive expression of CK7 and E-cadherin, various degrees of P504s expression, and no expression of CD10 and CD117, with a Ki-67 index of 1%-3%. Unlike other papillary renal cell carcinoma, the nine cases of PRNRP all showed characteristic positive expression of GATA3. The fluorescence in situ hybridization assay showed that the majority of PRNRPs (8/9) did not have triploids on chromosomes 7 and 17. The sequencing of the KRAS gene confirmed the presence of a nonsense KRAS mutation in 8 of the 9 cases. Conclusions: PRNRP is a subtype of papillary renal cell carcinoma with characteristic morphological, immunophenotypic and molecular features, and indolent behaviors. More data are needed to define PRNRP as "carcinoma", and a definitive diagnosis of PRNRP is of great significance for proper treatment choice and accurate prognostication.
Biomarkers, Tumor ; Carcinoma, Renal Cell/genetics* ; Female ; Humans ; In Situ Hybridization, Fluorescence ; Kidney ; Kidney Neoplasms/genetics* ; Male ; Middle Aged ; Prognosis