BACKGROUND: Disease-modifying therapies have been approved for the treatment of relapsing multiple sclerosis (RMS). The present study aims to examine the safety of teriflunomide in Chinese patients with RMS. METHODS: This non-randomized, multi-center, 24-week, prospective study enrolled RMS patients with variant (c.421C>A) or wild type ABCG2 who received once-daily oral teriflunomide 14 mg. The primary endpoint was the relationship between ABCG2 polymorphisms and teriflunomide exposure over 24 weeks. Safety was assessed over the 24-week treatment with teriflunomide. RESULTS: Eighty-two patients were assigned to variant ( n  = 42) and wild type groups ( n  = 40), respectively. Geometric mean and geometric standard deviation (SD) of pre-dose concentration (variant, 54.9 [38.0] μg/mL; wild type, 49.1 [32.0] μg/mL) and area under plasma concentration-time curve over a dosing interval (AUC tau ) (variant, 1731.3 [769.0] μg∙h/mL; wild type, 1564.5 [1053.0] μg∙h/mL) values at steady state were approximately similar between the two groups. Safety profile was similar and well tolerated across variant and wild type groups in terms of rates of treatment emergent adverse events (TEAE), treatment-related TEAE, grade ≥3 TEAE, and serious adverse events (AEs). No new specific safety concerns or deaths were reported in the study. CONCLUSION: ABCG2 polymorphisms did not affect the steady-state exposure of teriflunomide, suggesting a similar efficacy and safety profile between variant and wild type RMS patients. REGISTRATION NCT04410965, https://clinicaltrials.gov .
Humans ; Crotonates/adverse effects* ; Toluidines/adverse effects* ; Nitriles ; Hydroxybutyrates ; Female ; Male ; Adult ; ATP Binding Cassette Transporter, Subfamily G, Member 2/genetics* ; Middle Aged ; Multiple Sclerosis, Relapsing-Remitting/genetics* ; Prospective Studies ; Young Adult ; Neoplasm Proteins/genetics* ; East Asian People

BACKGROUND: It is inaccurate to reflect the level of dust exposure through working years. Furthermore, identifying a predictive indicator for lung function decline is significant for coal miners. The study aimed to explored whether club cell secretory protein (CC16) levels can reflect early lung function changes. METHODS: The cumulative respiratory dust exposure (CDE) levels of 1,461 coal miners were retrospectively assessed by constructed a job-exposure matrix to replace working years. Important factors affecting lung function and CC16 were selected by establishing random forest models. Subsequently, the potential of CC16 to reflect lung injury was explored from multiple perspectives. First, restricted cubic spline (RCS) models were used to compare the trends of changes in lung function indicators and plasma CC16 levels after dust exposure. Then mediating analysis was performed to investigate the role of CC16 in the association between dust exposure and lung function decline. Finally, the association between baseline CC16 levels and follow-up lung function was explored. RESULTS: The median CDE were 35.13 mg/m³-years. RCS models revealed a rapid decline in forced vital capacity (FVC), forced expiratory volume in the first second (FEV₁), and their percentages of predicted values when CDE exceeded 25 mg/m³-years. The dust exposure level (<5 mg/m³-years) causing significant changes in CC16 was much lower than the level (25 mg/m³-years) that caused changes in lung function indicators. CC16 mediated 11.1% to 26.0% of dust-related lung function decline. Additionally, workers with low baseline CC16 levels experienced greater reductions in lung function in the future. CONCLUSIONS CC16 levels are more sensitive than lung indicators in reflecting early lung function injury and plays mediating role in lung function decline induced by dust exposure. Low baseline CC16 levels predict poor future lung function.
Uteroglobin/blood* ; Humans ; Dust/analysis* ; Occupational Exposure/analysis* ; Male ; Middle Aged ; Adult ; Retrospective Studies ; Lung Injury/chemically induced* ; Coal Mining ; Biomarkers/blood* ; China/epidemiology* ; Air Pollutants, Occupational ; Female

Acute symptomatic osteoporotic thoracolumbar compression fracture (ASOTLF) can lead to chronic low back pain, kyphosis deformity, pulmonary dysfunction, loss of mobility, and even life-threatening complications. Vertebral augmentation is currently the mainstream treatment method for this condition. In 2019, the Editorial Board of Chinese Journal of Trauma and the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association collaboratively led the development of Clinical guideline for vertebral augmentation for acute symptomatic osteoporotic thoracolumbar compression fractures. Six years later, with advances in clinical diagnosis and treatment techniques as well as accumulating evidence in related fields, the 2019 guideline requires updating. To this end, the Spinal Trauma Group of Orthopedic Surgeons Branch of Chinese Medical Doctor Association, the Spinal Health Professional Committee of China Human Health Science and Technology Promotion Association, and the Minimally Invasive Orthopedics Professional Committee of Shaanxi Medical Doctor Association have organized experts in the field to develop the Clinical guideline for vertebral augmentation of acute symptomatic osteoporotic thoracolumbar compression fractures ( version 2025) , based on the latest evidence-based medical researches. This guideline incorporates 3 recommendations retained from the 2019 version with updated strength of evidence, along with 12 new recommendations. It provides recommendations from six aspects of diagnosis, pain management, treatment option selection, prevention of postoperative complications, anti-osteoporosis therapy, and postoperative rehabilitation, aiming to provide a reference for standard treatment of vertebral augmentation for ASOTLF in hospitals at all levels.

OBJECTIVE: To explore the application value and clinical effect of 3D printing combined with customized bone plate in the treatment of acetabular fracture. METHODS: From June 2020 to June 2022, 11 patients with acetabular fractures underwent preoperative planning using 3D printing technology and were treated with customized bone plates including 8 males and 3 females, aged 25 to 66 years old. The fractures were classified according to Letournel-Judet:4 posterior wall fractures, 2 T-type fractures, 2 transverse posterior wall fractures, 2 double column fractures, and 1 anterior column with posterior semi-transverse fractures. The operative time, intraoperative blood loss, intraoperative fluoroscopy times, postoperative drainage volume, postoperative fracture healing time, and hip function score were recorded and analyzed. RESULTS: The operation time of 11 patients was 80 to 150 min, intraoperative blood volume was 150 to 700 ml, fluoroscopy frequency was 2 to 6, postoperative drainage flow was 60 to 195 ml, and the fracture healing time was 2.5 to 6.0 months. Fracture reduction was evaluated according to Matta score:anatomical reduction in 3 cases and satisfactory reduction in 8 cases. Eleven patients were followed up for 7 to 18 months. The hip Merle d'Aubigne function scores were excellent in 6 cases, good in 3 cases, fair in 1 case and poor in 1 case. Incision fat liquefaction occurred in 1 case and obturator nerve traction in 1 case. CONCLUSION The application of 3D printing technology combined with customized bone plates in the treatment of acetabular fracture is effective. In addition, the printed model can provide the operator with the results of the three-dimensional shape of the fracture, which is convenient for surgical reduction and effectively improves the efficiency of surgery.
Humans ; Female ; Male ; Middle Aged ; Acetabulum/surgery* ; Printing, Three-Dimensional ; Adult ; Aged ; Bone Plates ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods*

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

The pathological mechanisms and related physiological indicators of acute mountain sickness(AMS)were introduced,and the present situation of wearable devices applied in AMS auxiliary detection and diagnosis were reviewed.The challenges and future development directions of wearable devices applied in auxiliary detection and diagnosis were pointed out.[Chinese Medical Equipment Journal,2025,46(9):100-107]

Objective:To report the nationwide surveillance results of pathogenic profiles and antimicrobial resistance patterns of Gram-positive bloodstream infections in China in 2023.Methods:The clinical isolates of Gram-posttive bacteria from blood cultures were collected in member hospitals of National Bloodstream Infection Bacterial Resistant Investigation Collaborative System（BRICS）during January to December 2023. Antimicrobial susceptibility testing was performed using the dilution method recommended by the Clinical and Laboratory Standards Institute（CLSI）. Statistical analyses were conducted using WHONET 5.6 and SPSS 25.0 software.Results:A total of 4 385 Gram-positive bacterial isolates were obtained from 60 participating center. The top five pathogens were Staphylococcus aureus（ n=1 544，35.2%），coagulase-negative Staphylococci（ n=1 441，32.9%）， Enterococcus faecium（ n=574，13.1%）， Enterococcus faecalis（ n=385，8.8%），and α-hemolytic Streptococci（ n=187，4.3%）. The prevalence of methicillin-resistant Staphylococcus aureus（MRSA）and methicillin-resistant coagulase-negative Staphylococci（MRCNS）was 26.2%（405/1 544）and 69.8%（1 006/1 441），respectively. Notably，all Staphylococci remained susceptible to glycopeptide or daptomycin. Staphylococcus aureus demonstrated excellent susceptibility（>97.0%）to cephalobiol，rifampicin，trimethoprim-sulfamethoxazole，linezolid，minocycline，tigecycline，and eravacycline. No Enterococcus exhibiting resistance to linezolid were detected. Glycopeptide resistance was uncommon but more frequent in Enterococcus faecium（resistance to vancomycin and teicoplanin：both 1.7%）compared to Enterococcus faecalis（both 0.3%）. The detection rates of MRSA and MRCNS exhibited significant regional variations across the country（ χ2=17.674 and 148.650，respectively，both P<0.001）. No vancomycin-resistant Enterococci were detected in central China. Institutional comparison demonstrated higher prevalence of MRSA（ χ2=14.111， P<0.001）and MRCNS（ χ2=4.828， P=0.028）in provincial hospitals than that in municipal hospitals. Socioeconomic analysis identified elevated detection rates of both MRSA（ χ2=18.986， P<0.001）and MRCNS（ χ2=4.477， P=0.034）in less developed regions（per capita GDP

Objective:To report the results of bacterial resistant investigation collaborative system（BRICS）on the distribution and antimicrobial resistance profile of clinical Gram-negative bacteria isolates from bloodstream infections in China in 2023，and provide reference for clinical tretment of bloodstream infections and prevention and control of bacterial resistance.Methods:The clinical isolates of Gram-negative bacteria from blood cultures in member hospitals of BRICS were collected during January 2023 to December 2023. Antibiotic susceptibility tests were conducted by agar dilution or broth dilution methods recommended by Clinical and Laboratory Standards Institute（CLSI）. WHONET 5.6 and SPSS 25.0 were used to analyze the data.Results:During the study period，11 492 strains of Gram-negative bacteria were collected from 60 hospitals，of which 10 098（87.9%）were Enterobacterales and 1 394（12.1%）were non-fermentative bacteria. The top 5 bacterial species were Escherichia coli（50.0%）， Klebsiella pneumoniae（26.1%）， Pseudomonas aeruginosa（5.1%）， Acinetobacter baumannii complex（5.0%）and Enterobacter cloacae complex（4.1%）. The ESBL-producing rates in Escherichia coli， Klebsiella pneumoniae and Proteus mirablilis were 46.8%（2 685/5 741），18.3%（549/2 999）and 44.0%（77/175），respectively. The prevalence of carbapenem-resistant Escherichia coli（CREC）and carbapenem-resistant Klebsiella pneumoniae（CRKP）were 1.3%（76/5 741）and 15.0%（450/2 999）；32.9%（25/76）and 78.0%（351/450）of CREC and CRKP were sensitive to ceftazidime/avibactam combination，respectively. 94.7%（72/76）and 90.2%（406/450）of CREC and CRKP were sensitive to aztreonam/avibactam combination. Furthermore，57.9%（44/76）and 79.1%（356/450）were sensitive to imipenem/relebactam combination. The prevalence of carbapenem-resistant Acinetobacter baumannii（CRAB）complex was 64.6%（370/573），while more than 80.0% of CRAB complex was sensitive to tigecycline，eravacycline and polymyxin B. The prevalence of carbapenem-resistant Pseudomonas aeruginosa（CRPA）was 17.0%（99/581）. There were differences in the composition ratio of Gram-negative bacteria in bloodstream infections and the prevalence of important Gram-negative bacteria resistance among different regions in China，with statistically significant differences in the prevalence of CREC，CRKP，CRPA and CRAB complex（ χ2=10.6，28.6，10.8 and 19.3， P<0.05）. The prevalence of ESBL-producing Escherichia coli， CREC，CRAB complex and CRKP were higher in provincial hospitals than those in municipal hospitals（ χ2=12.5，9.8，12.7 and 57.8，all P<0.01）. Conclusions:Gram-negative bacteria are the main pathogens causing bloodstream infections in China，and Escherichia coli is ranked in the top，while the trend of Klebsiella pneumoniae increases continuously with time. CRKP infection shows a slow upward trend，CREC infecton maintains a low prevalence level，and CRAB complex infection continues to exhibit a high prevalence rate. The composition and resistance patterns of pathogens causing bloodstream infections vary to some extent across different regions and levels of hospitals in China.

Objective To establish a stable,reliable,and clinically relevant porcine model of endotoxin-induced acute respiratory distress syndrome(ARDS).Methods Ten 8-month-old male Bama minipigs were deeply sedated,followed by invasive mechanical ventilation and electrocardiographic monitoring.Lipopolysaccharide(LPS)was intravenously pumped at 600 μg/(kg·h)for 3 hours,then maintained at 15 μg/(kg·h)thereafter.Dynamic monitoring was performed at five time points after LPS injection(LPS 0,1,3,5,and 8 h),including arterial blood gas analysis and chest computed tomography(CT)scans.Pathological examination of lung tissues obtained via bronchoscopic biopsy(HE staining and transmission electron microscopy)was conducted.These indicators were comprehensively used to evaluate the success of the animal model.Results At 5 hours after LPS administration,8 minipigs developed symptoms such as skin cyanosis,elevated body temperature,and respiratory distress.The oxygenation index decreased to<300 mmHg.Chest CT scans showed diffuse pulmonary infiltrates.Histopathology revealed alveolar edema and hyaline membrane formation.Transmission electron microscopy demonstrated disruption of pulmonary blood-air barrier,depletion of lamellar bodies in type Ⅱ pneumocytes,inflammatory cell infiltration,and exudation of plasma proteins and fibrin.Compared with LPS 0 h,at LPS 8 h,the oxygenation index and arterial blood pH were significantly decreased(P<0.001),while blood lactic acid and serum potassium were significantly increased(P<0.05);serum calcium and base excess were significantly decreased(P<0.05),and the lung injury score based on HE-stained lung sections was significantly increased(P<0.01).Conclusion The porcine ARDS model established by continuous LPS injection can dynamically simulate the pathophysiological characteristics and typical pathological manifestations of clinical septic ARDS,making it an effective tool to study the pathogenesis,prevention,and treatment strategies of septic ARDS.

Objective:To construct a nomogram prediction model for the malignant risk of breast lesions based on quantitative multimodal ultrasound features and clinical indicators，and to explore its clinical application value.Methods:A total of 430 patients with breast diseases（473 lesions）confirmed by pathological examination at Kunshan Traditional Chinese Medicine Hospital from August 2018 to December 2023 were retrospectively analyzed in the study. All the patients underwent routine handheld ultrasound（HHUS），automated breast volume scanning（ABVS）and ultrasound elastography（UE）examinations before biopsy or surgery. Four hundred and seventy-three breast lesions were randomly divided into training set（ n=331）and validation set（ n=142）at a ratio of 7∶3. The ABVS ultrasound features of 331 lesions in the training set were analyzed to identify the risk features of malignant breast lesions. Based on the weight of the regression coefficients β，the ABVS risk features were assigned quantitative scores for each lesion. Using pathology results as the gold standard，ROC curves were plotted to compare the diagnostic efficacy of ABVS quantitative scoring and HHUS in the training set. The variable with higher efficacy was selected for inclusion in the multivariable logistic regression analysis. Based on the identified independent predictive factors，a nomogram was constructed to quantify the malignancy risk of breast lesions. The nomogram was evaluated and validated using the area under the ROC curve（AUC），calibration curve and clinical decision curve analysis（DCA）. Results:The AUC for ABVS quantitative scoring and HHUS in distinguishing benign and malignant breast lesions were 0.941 and 0.903，respectively，with a statistically significant difference（ Z=2.081， P=0.037）. Multivariate Logistic regression analysis showed that age，ABVS quantitative score and elasticity score were independent predictors for the identification of benign and malignant breast lesions（all P<0.05）. A nomogram was constructed based on the aforementioned independent predictive factors. The AUC for the nomogram were 0.968 in the training set and 0.943 in the validation set，indicating good discrimination. The calibration curve indicated that the predicted probabilities from the nomogram were in good agreement with the actual outcomes. DCA indicated strong clinical applicability of the nomogram. Conclusions:The nomogram based on ABVS quantitative scores，elasticity scores，and age demonstrates high diagnostic value，providing a novel method for preoperative assessment of the malignancy risk of breast lesions.