Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

Objective:To analyze a patient with infertility due to complex chromosome rearrangement by optical genome mapping (OGM).Methods:A female patient who was diagnosed with " primary infertility" at Shenzhen Longhua District Maternal and Child Health Care Hospital in April 2024 was selected as the study subject. Clinical data of the patient was collected. Chromosomal G banding karyotyping analysis was carried out for the patients and her parents, in addition with OGM and copy number variation sequencing (CNV-seq). This study was approved by the Medical Ethics Committee of the Hospital (Ethics No.: 2023052504).Results:The patient, a 33-year-old female, had infertility for the past 5 years. OGM revealed formation of two derivative chromosomes through rearrangement of chromosomal 5 and 18. A loss of heterozygosity on chromosome 5 was also detected by OGM and CNV-seq techniques. Both of her parents had a normal karyotype.Conclusion:The OGM technique can refine the position of chromosome breakpoints and determine the direction and position of insertional fragment. Combined with karyotype analysis, the OGM can accurately determine the chromosomal karyotype of the patient and facilitate genetic counseling.

Objective:To compare the changes in fracture displacement under different vertical loadings between the 2 different internal fixation modalities for vertically unstable femoral neck fractures of Pauwels type Ⅲ by a mechanical study and a finite element analysis.Methods:Twelve biomimic bones were transversely dissected from 10 cm below the lesser trochanter of the femur to create femoral neck fracture models with a Pauwels angle of 70° using a swing saw. The models were equally divided into 2 groups ( n=6): group A was fixed with 3 cannulated screws after fracture reduction (scheme A), and group B with 3 cannulated screws plus a self-designed anteromedial support plate after fracture reduction (scheme B). Continuous vertical force was applied using a mechanical testing machine. Changes in displacement were recorded and load-displacement curves were plotted. One volunteer (female, 28 years old, 168 cm in height and 65 kg in weight) was selected for finite element analysis of her CT images of both lower limbs to examine the maximum displacement and the maximum Mises stress in scheme A and scheme B respectively. Results:In groups A and B respectively: All the 6 biomimic mimetic bones had similar load and displacement curves, and similar fracture displacements (Dx) at different loading points (N X); the curves of 6 biomimic bones were highly fitted with S-shaped curve equation (the r-square value was close to 1). At the initial loading stage (0 N0.05). When the load was 100 N

Objective To evaluate the clinical utility of the f-wave to QRS complex amplitude ratio(f/R ratio)in intracardiac electrogram(IC-ECG)-guided positioning of peripherally inserted central catheter(PICC)tips in patients with atrial fibrillation(AF),providing evidence to enhance clinical practice.Methods This study employed a conve-nience sampling method to enroll eligible AF patients admitted to a tertiary hospital in Suzhou from July 2023 to July 2024.During PICC placement,IC-ECG was utilized to monitor f-wave and QRS complex amplitude variations.Following successful catheterization,the f/R ratio was measured,and chest X-ray was performed to confirm the catheter tip position.The accuracy of PICC tip positioning across different f/R ratio ranges was analyzed,and the incidence of arrhythmias was recorded.A receiver operating characteristic curve was constructed to assess the diag-nostic performance of the f/R ratio in PICC tip localization.Results A total of 68 AF patients were included,with f/R ratios ranging from 20.63％to 91.24％.PICC tip positioning accuracy varied significantly across different f/R ratio ranges(P=0.006).The area under the ROC curve(AUC)for f/R ratio in PICC tip positioning was 0.784(P=0.009),with a maximum Youden index of 0.567,an optimal diagnostic threshold of 40.00％,a sensitivity of 81.7％,a speci-ficity of 75.0％,a positive predictive value of 96.1％,and a negative predictive value of 35.3％.No arrhythmias other than AF occurred during the procedure.Conclusion The f/R ratio provides reliable and safe guidance for PICC tip positioning in AF patients.An f/R ratio ≥40％is associated with higher accuracy in identifying the optimal catheter tip position.

Objective:To establish a TaqMan-MGB probe-based method for detecting the polymorphic loci C677T and A1298C of the MTHFR gene.Methods:Specific primers and TaqMan-MGB probes targeting the C677T and A1298C polymorphic loci of the MTHFR gene were designed and optimized based on the gene sequence information.A real-time quantitative PCR detection system was established.Gradient dilution experiments were conducted to determine the limit of detection,and reproducibility experiments were performed to evaluate detection consistency.Specificity was validated using wild-type and mutant plasmid templates.The method was applied to detect 56 clinical samples,and its accuracy and practicality were assessed through comparison with traditional Sanger sequencing.Results:The TaqMan-MGB probe method demonstrated high specificity for detecting the C677T and A1298C loci,with no cross-reactivity between wild-type and mutant probes,enabling accurate genotype differentiation.Sensitivity experiments revealed detection limits of 1.13 × 103 copies/μL for C677T and 8.39 × 101 copies/μL for A1298C.Reproducibility experiments showed coefficients of variation below 1％,indicating stable and reliable results.Among the 56 clinical samples,the overall detection rate for the C677T locus was 86.99％,and for the A1298C locus,it was 97.92％.The TaqMan-MGB method exhibited good concordance with Sanger sequencing results.Conclusion:The TaqMan-MGB method exhibits high specificity,sensitivity,and excellent reproducibility in detecting the polymorphic loci C677T and A1298C of the MTHFR gene,making it suitable for rapid detection in large-scale clinical samples.This method provides an effective molecular diagnostic tool for the early diagnosis and prevention of folate-related diseases.

Objective This study investigated feasible cases and their significance in promoting the"generalized"development of inspection through digital-intelligent equipment.Methods A qualitative research approach was used,involving interviews conducted between February 2025 and March 2025 with experts in traditional Chinese medicine diagnostics,clinical research methodology,medical engineering integration,and related disciplines,using both online and offline methods.In accordance with the Consolidated Criteria for Reporting Qualitative Research,feasible cases involving the specific application of digital equipment in various parts of observation were collected through item enrichment.The significance of extending observation capabilities via these cases was analyzed,along with the overall implications of integrating digital technologies with traditional inspection method.Results Interviews were completed with 11 experts from domestic universities and research institutes in the fields of traditional Chinese medicine diagnosis,medical engineering integration,and related disciplines.A total of 78 feasible cases of digital-intelligent inspection were identified,along with 69 insights regarding the significance of enhancing the inspection capabilities.These insights were synthesized into two dimensions and 23 holistic meanings.The first dimension is to expand the scope of inspection,including obtaining internal environmental characteristics,observing external environmental characteristics,expanding thermodynamic characteristic data,and crossing time and space.The second dimension is to improve the quality of observation and diagnosis information collection and analysis,including 19 specific meanings,such as standardized collection environment,objective quantification,and refined observation.Conclusion Digital-intelligent equipment plays a significant role in expanding the scope of inspection content and achieving high-quality acquisition and analysis of extensive inspection information.These advancements extend and enrich the capabilities of traditional inspection method in traditional Chinese medicine.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveTo explore the data standard system of electronic medical records in the field of rehabilitation, focusing on the terminology and coding standards, data structure, and key content categories of rehabilitation electronic medical records. MethodsBased on the Administrative Norms for the Application of Electronic Medical Records issued by the National Health Commission of China, the electronic medical record standard architecture issued by the International Organization for Standardization and Health Level Seven (HL7), the framework of the World Health Organization Family of International Classifications (WHO-FICs), Basic Architecture and Data Standards of Electronic Medical Records, Basic Data Set of Electronic Medical Records, and Specifications for Sharing Documents of Electronic Medical Records, the study constructed and organized the data structure, content, and data standards of rehabilitation electronic medical records. ResultsThe data structure of rehabilitation electronic medical records should strictly follow the structure of electronic medical records, including four levels (clinical document, document section, data set and data element) and four major content areas (basic information, diagnostic information, intervention information and cost information). Rehabilitation electronic medical records further integrated information related to rehabilitation needs and characteristics, emphasizing rehabilitation treatment, into clinical information. By fully applying the WHO-FICs reference classifications, rehabilitation electronic medical records could establish a standardized framework, diagnostic criteria, functional description tools, coding tools and terminology index tools for the coding, indexing, functional description, and analysis and interpretation of diseases and health problems. The study elaborated on the data structure and content categories of rehabilitation electronic medical records in four major categories, refined the granularity of reporting rehabilitation content in electronic medical records, and provided detailed data reporting guidance for rehabilitation electronic medical records. ConclusionThe standardization of rehabilitation electronic medical records is significant for improving the quality of rehabilitation medical services and promoting the rehabilitation process of patients. The development of rehabilitation electronic medical records must be based on the national and international standards. Under the general electronic medical records data structure and standards, a rehabilitation electronic medical records data system should be constructed which incorporates core data such as disease diagnosis, functional description and assessment, and rehabilitation interventions. The standardized rehabilitation electronic medical records scheme constructed in this study can support the improvement of standardization of rehabilitation electronic medical records data information.