Cervical spinal cord injury without fracture-dislocation (CSCIWFD) is referred to as a special type of cervical spinal cord injury characterized by traumatic spinal cord dysfunction and no significant bony structural abnormalities on imagines. Duo to the high risk of missed diagnosis during the initial consultation, CSCIWFD may lead to progressive neurological deterioration or even complete paralysis, severely impacting patients′ prognosis. Currently, there are no established consensuses over the diagnosis and treatment of CSCIWFD, such as the lack of evidence-based standards for indications of non-surgical treatment and risk of secondary neurological injury, as well as debates over the optimal timing for surgical intervention and indications for different surgical approaches. To address these issues, the Spine Trauma Group of the Orthopedic Branch of the Chinese Medical Doctor Association organized experts in the relevant fields to formulate Diagnosis and treatment guideline for acute cervical spinal cord injury without fracture- dislocation in adults ( version 2025) . Based on evidence-based medicine and the principles of scientific rigor and clinical applicability, the guidelines proposed 11 recommendations covering terminology, diagnosis, evaluation treatment, and rehabilitation, etc., aiming to standardize the management of CSCIWFD.

Objective:To investigate the impact of correcting rotational subluxation through circumferential fusion and transforaminal lumbar interbody fusion (TLIF) on postoperative coronal plane imbalance in degenerative scoliosis.Methods:A retrospective analysis was conducted on the data of 108 patients with type A degenerative scoliosis in the Nanjing classification who underwent primary multi-segment posterior column osteotomy (PCO) with deformity correction and internal fixation at Nanjing Gulou Hospital from June 2017 to June 2021. Patients were divided into two groups based on the presence of preoperative rotational subluxation: the rotational subluxation group and the non-rotational subluxation group. The rotational subluxation group consisted of 60 patients, with 8 males and 52 females, aged 63.7±5.5 years (range, 56-75 years). The non-rotational subluxation group included 48 patients, with 5 males and 43 females, aged 64.4±5.2 years (range, 53-72 years). Within the rotational subluxation group, depending on whether TLIF was performed on the rotational subluxation segment, they were further categorized into the TLIF group and the PCO group. The TLIF group comprised 28 patients, while the PCO group had 32 patients. Full-spine anteroposterior and lateral X-rays were taken preoperatively, postoperatively, and at the last follow-up to measure coronal balance types and radiographic parameters. The differences in the lumbar Cobb angle, coronal balance distance (CBD), and the Cobb angle of the lumbosacral curve (Cobb-Fra angle) were compared between the rotational subluxation group and the non-rotational subluxation group, as well as between the TLIF group and the PCO group.Results:The average surgery duration ranged from 200 to 310 min, with a mean of 235±47 min. The intraoperative blood loss ranged from 700 to 2,400 ml, with an average of 950±355 ml. The number of fused segments in the rotational subluxation group was 7.6±2.1, ranging from 5 to 11 segments, while in the non-rotational subluxation group, it was 7.4±2.0, ranging from 5 to 10 segments. Postoperatively, 13%(8/60) of patients in the rotational subluxation group developed type C coronal imbalance, significantly higher than the 2%(1/48) in the non-rotational subluxation group. The immediate postoperative and final follow-up lumbar Cobb angles, CBD, and Cobb-Fra angles in the rotational subluxation group were 20.60°±10.73° and 20.33°±10.92°, 22.53±16.45 mm and 18.53±17.31 mm, 13.14°±4.40° and 11.23°±4.92°, respectively, which were higher than those in the non-rotational subluxation group (13.92°±7.02° and 12.92°±6.64°, 18.62±17.44 mm and 8.83±8.95 mm, 11.91°±3.03° and 9.52°±3.30°), with statistical significance ( P<0.05).. Among patients in the rotational subluxation group, the probability of new-onset coronal imbalance postoperatively was 4%(1/28) in the TLIF group, which was lower than the 22%(7/32) in the PCO group, with a statistically significant difference (χ 2=4.330, P=0.037). The immediate postoperative and final follow-up lumbar Cobb angles, CBD, and Cobb-Fra angles in the PCO group were 25.63°±11.00° and 25.13°±11.04°, 27.37±18.95 mm and 25.25±18.67 mm, 15.50°±3.62° and 14.08°±4.77°, respectively, which were significantly higher than those in the TLIF group (14.86°±6.96° and 14.86°±5.37°, 17.08±10.94 mm and 10.86±7.86 mm, 10.14°±3.37° and 8.46°±2.66°), with statistical significance ( P<0.05). Conclusion:For patients with Type A degenerative scoliosis combined with rotational subluxation according to the Nanjing classification, performing a 360-degree circumferential release and interbody fusion at the segment with rotatory subluxation can reduce the risk of developing new postoperative coronal imbalances.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

This study analyzed the genetic evolutionary characteristics of sandflies and their effects on the spread of kala-azar in various environments in endemic provinces in China,to provide a scientific basis for kala-azar disease prevention and control.Sand-flies were collected in kala-azar endemic areas such as southern Xinjiang,the large hilly areas of southern Gansu,the northern Sich-uan and Taihang Mountains,and surrounding small hills.The cytochrome c oxidase subunit I and cytochrome b gene fragments of mito-chondrial DNA were amplified to identify sandfly species.The COI and Cytb gene sequences of sandflies from southern Xinjiang and Si-chuan recorded in NCBI were also collected.The intraspecific and interspecific genetic differences of sandflies were calculated in MEGA11.0,and a phylogenetic tree was constructed through the neighbor-joining method,for analysis of the genetic and evolutionary characteristics of sandfly populations and their effects on disease transmission.A total of 155 sandflies were collected from nine sam-pling sites in seven provinces of China;the species included Phlebotomus chinensis,Phlebotomus wui,and Sergentomyia squamirostris.Five sandfly species belonging to two genera were collected:P.chinensis,P.wui,and Phlebotomus alexandri in the genus Phleboto-mus,and S.squamirostris in the genus Sergentomyia.Genetic evolution analysis based on COI and Cytb gene sequences indicated intra-specific genetic distances of 0-0.062 and 0-0.056,respectively,and interspecific genetic distances of 0.126-0.176 and 0.110-0.171,respectively.The phylogenetic tree indicated that P.wui,P.alexandri,Phlebotomus longiductus,and S.squamirostris clus-tered into one branch.The sequences of P.chinensis in the large and small hilly areas clustered into two geographical clades.In the small hilly areas,the sequences of P.chinensis aggregates showed small genetic differences,the pathogen infection was consistent,and the cases showed an epidemic spread trend.Large genetic differences at the molecular level were observed among sandflies in dif-ferent ecological regions,thus indicating key effects on leishmaniasis transmission.On the basis of these findings,prevention and con-trol strategies should be adapted to local conditions,and precise and effective prevention and control measures should be formulated according to the genetic evolution characteristics of sandflies in different regions,to better control the transmission of Kala-azar.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveTo explore the data standard system of electronic medical records in the field of rehabilitation, focusing on the terminology and coding standards, data structure, and key content categories of rehabilitation electronic medical records. MethodsBased on the Administrative Norms for the Application of Electronic Medical Records issued by the National Health Commission of China, the electronic medical record standard architecture issued by the International Organization for Standardization and Health Level Seven (HL7), the framework of the World Health Organization Family of International Classifications (WHO-FICs), Basic Architecture and Data Standards of Electronic Medical Records, Basic Data Set of Electronic Medical Records, and Specifications for Sharing Documents of Electronic Medical Records, the study constructed and organized the data structure, content, and data standards of rehabilitation electronic medical records. ResultsThe data structure of rehabilitation electronic medical records should strictly follow the structure of electronic medical records, including four levels (clinical document, document section, data set and data element) and four major content areas (basic information, diagnostic information, intervention information and cost information). Rehabilitation electronic medical records further integrated information related to rehabilitation needs and characteristics, emphasizing rehabilitation treatment, into clinical information. By fully applying the WHO-FICs reference classifications, rehabilitation electronic medical records could establish a standardized framework, diagnostic criteria, functional description tools, coding tools and terminology index tools for the coding, indexing, functional description, and analysis and interpretation of diseases and health problems. The study elaborated on the data structure and content categories of rehabilitation electronic medical records in four major categories, refined the granularity of reporting rehabilitation content in electronic medical records, and provided detailed data reporting guidance for rehabilitation electronic medical records. ConclusionThe standardization of rehabilitation electronic medical records is significant for improving the quality of rehabilitation medical services and promoting the rehabilitation process of patients. The development of rehabilitation electronic medical records must be based on the national and international standards. Under the general electronic medical records data structure and standards, a rehabilitation electronic medical records data system should be constructed which incorporates core data such as disease diagnosis, functional description and assessment, and rehabilitation interventions. The standardized rehabilitation electronic medical records scheme constructed in this study can support the improvement of standardization of rehabilitation electronic medical records data information.

ObjectiveTo analyze the data structure and standards of rehabilitation outpatient medical records, to provide data support for improving the quality of rehabilitation outpatient care and developing medical insurance payment policies. MethodsBased on the normative documents issued by the National Health Commission, Basic Standards for Medical Record Writing and Standards for Electronic Medical Record Sharing Documents, in accordance with the Quality Management Regulations for Outpatient (Emergency) Diagnosis and Treatment Information Pages (Trial), reference to the framework of the World Health Organization Family of International Classifications (WHO-FICs), the data framework and content of rehabilitation outpatient medical records were determined, and the data standards were discussed. ResultsThis study constructed a data framework for rehabilitation outpatient medical records, including four main components: patient basic information, visit process information, diagnosis and treatment information, and cost information. Three major reference classifications of WHO-FICs, International Classification of Diseases, International Classification of Functioning, Disability and Health, and International Classification of Health Interventions,were used to establish diagnostic standards and standardized terminology, as well as coding disease diagnosis, functional description, functional assessment, and rehabilitation interventions, to improve the quality of data reporting, and level of quality control in rehabilitation. ConclusionThe structuring and standardization of rehabilitation outpatient medical records are the foundation for sharing of rehabilitation data. The using of the three major classifications of WHO-FICs is valuable for the terminology and coding of disease diagnosis, functional description and assessment, and intervention in rehabilitation outpatient medical records, which is significant for sharing and interconnectivity of rehabilitation outpatient data, as well as for optimizing the quality and safety of rehabilitation medical services.

ObjectiveTo explore the standardization of inpatient rehabilitation medical record summary sheet, encompassing its structure, content and data standards, to enhance the standardization level of inpatient rehabilitation medical record summary sheet, improve data reporting quality, and provide accurate data support for medical insurance payment, hospital performance evaluation, and rehabilitation discipline evaluation. MethodsBased on the relevant specifications of the National Health Commission's Basic Norms for Medical Record Writing, Specifications for Sharing Documents of Electronic Medical Records, and Quality Management and Control Indicators for Inpatient Medical Record Summary Sheet (2016 Edition), this study analyzed the structure and content of the inpatient rehabilitation medical record summary sheet. The study systematically applied the three major reference classifications of the World Health Organization Family of International Classifications, International Classification of Diseases (ICD-10/ICD-11, ICD-9-CM-3), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), for disease diagnosis, functional description and assessment, and rehabilitation intervention, forming a standardized terminology system and coding methods. ResultsThe inpatient rehabilitation medical record summary sheet covered four major sections: inpatient information, hospitalization information, diagnosis and treatment information, and cost information. ICD-10/ICD-11 were the standards and coding tools for admission and discharge diagnoses in the inpatient rehabilitation medical record summary sheet. The three functional assessment tools recommended by ICD-11, the 36-item version of World Health Organization Disability Assessment Schedule 2.0, Brief Model Disability Survey and Generic Functioning domains, as well as ICF, were used for rehabilitation functioning assessment and the coding of outcomes. ICHI Beta-3 and ICD-9-CM-3 were used for coding surgical procedures and operations in the medical record summary sheet, and also for coding rehabilitation intervention items. ConclusionThe inpatient rehabilitation medical record summary sheet is a summary of the relevant content of the rehabilitation medical record and a tool for reporting inpatient rehabilitation data. It needs to be refined and optimized according to the characteristics of rehabilitation, with necessary data supplemented. The application of ICD-11/ICD-10, ICF and ICHI Beta-3/ICD-9-CM-3 classification standards would comprehensively promote the accuracy of inpatient diagnosis of diseases and functions. Based on ICD-11 and ICF, relevant functional assessment result data would be added, and ICHI Beta-3/ICD-9-CM-3 should be used to code rehabilitation interventions. Improving the quality of rehabilitation medical records and inpatient rehabilitation medical record summary sheet is an important part of rehabilitation quality control, and also lays an evidence-based data foundation for the analysis and application of inpatient rehabilitation medical record summary sheet.