Objective To develop a novel protective ventilator circuit component and to verify its performance by water seal and anti-splash experiments.Methods A novel protective ventilator circuit component had a design scheme with the multifunctional joint,and consisted of a tee connection tube,an isolation sleeve and a stop sleeve,of which,the tee connection tube was made of polyethylene polymer material and the others were made of silicone material.The tee connection tube had a T-shaped structure with two standard connection ports,which was composed of an adapter,a sealing cap,a plug and a sealing ring;the isolation sleeve was in the shape of a cylinder with a raised bottom,which was inserted into the adapter;the stop sleeve was located in the isolation sleeve,with an inverted frustum of a cone at the bottom and a rounded hole in the middle of the inverted frustum.An open ventilator circuit tube was involved in the performance verification of the circuit component developed.In the water seal experiment,sputum aspiration was simulated and the heights of the liquid level drop in the L-shaped tubes were compared after sputum aspiration.In the anti-splash experiment,the infection rates on the surfaces of the sterile hole towels and gloves were calculated.Results Water seal experiment showed after sputum aspiration the open ventilator circuit tube had the liquid level at the L-shaped tube higher significantly than that of the circuit component;the anti-splash experiment indicated sputum aspiration resulted in the occurance of the splashing out of the secretion and 77.5%infection rate by the open ventilator circuit tube,while no splashing out and 0%infection rate by the circuit component developed.Conclusion The novel protective ventilator circuit component behaves well in sealing and anti-splashing,and thus is worthy of clinical application for sputum aspiration.[Chinese Medical Equipment Journal,2025,46(4):113-117]

Apical microsurgery is accurate and minimally invasive, produces few complications, and has a success rate of more than 90%. However, due to the lack of awareness and understanding of apical microsurgery by dental general practitioners and even endodontists, many clinical problems remain to be overcome. The consensus has gathered well-known domestic experts to hold a series of special discussions and reached the consensus. This document specifies the indications, contraindications, preoperative preparations, operational procedures, complication prevention measures, and efficacy evaluation of apical microsurgery and is applicable to dentists who perform apical microsurgery after systematic training.
Microsurgery/standards* ; Humans ; Apicoectomy ; Contraindications, Procedure ; Tooth Apex/diagnostic imaging* ; Postoperative Complications/prevention & control* ; Consensus ; Treatment Outcome

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Intentional tooth replantation (ITR) is an advanced treatment modality and the procedure of last resort for preserving teeth with inaccessible endodontic or resorptive lesions. ITR is defined as the deliberate extraction of a tooth; evaluation of the root surface, endodontic manipulation, and repair; and placement of the tooth back into its original socket. Case reports, case series, cohort studies, and randomized controlled trials have demonstrated the efficacy of ITR in the retention of natural teeth that are untreatable or difficult to manage with root canal treatment or endodontic microsurgery. However, variations in clinical protocols for ITR exist due to the empirical nature of the original protocols and rapid advancements in the field of oral biology and dental materials. This heterogeneity in protocols may cause confusion among dental practitioners; therefore, guidelines and considerations for ITR should be explicated. This expert consensus discusses the biological foundation of ITR, the available clinical protocols and current status of ITR in treating teeth with refractory apical periodontitis or anatomical aberration, and the main complications of this treatment, aiming to refine the clinical management of ITR in accordance with the progress of basic research and clinical studies; the findings suggest that ITR may become a more consistent evidence-based option in dental treatment.
Humans ; Tooth Replantation/methods* ; Consensus ; Periapical Periodontitis/surgery*

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

Objective To design a phased array ultrasonic focusing control system based on sinusoidal signal excitation in order to avoid the introduction of high-frequency interference components into the ultrasonic transducer and improve the electronic focusing performance of phased array ultrasound.Methods The system designed mainly used the high-speed field programmable gate array(FPGA)chip combined with the high-speed digital to analog converter(DAC)to realize synchronous output and control of multi-channel sinusoidal signals.There were 8 sinusoidal excitation emission modules based on FPGA and DAC and one sinusoidal ultrasonic excitation control module based on ZYNQ MPSoC involved in the hardware part of the system,in which the emission modules generated multi-channel sinusoidal excitations and timing control of sinusoidal signals within the module and the control module was responsible for controlling the triggering timing between each sinusoidal excitation transmitter module.The system developed had its software designed with MATLAB App Designer to improve the human-computer interaction experience.Performance verification was carried out for the system by testing the output waveform,inter-channel delay error and focused sound field of each channel.Results The system developed achieved generation and timing control of 64-channel sinusoidal ultrasound excitations,with the output channel main frequency being 0.5 MHz,amplitude within 0 and±12.5 V and the inter-channel delay errors not higher than 26.0 ns;a focused sound field with a focal spot diameter of 4.2 mm(-3 dB)at a depth of 50 mm was obtained when the system was applied to driving a 64-array phased-array transducer.Conclusion The system designed is capable of realizing ultrasonic electron focusing under sinusoidal excitation,which helps to improve the focusing resolution of non-invasive and precise deep brain stimulation techniques relying on the accuracy of ultrasonic focusing such as transcranial magneto-acoustic stimulation(TMAS)and transcranial ultrasonic stimulation(TUS).[Chinese Medical Equipment Journal,2025,46(5):14-20]

Kv1.3,a voltage-gated potassium channel,is highly expressed in T lymphocytes,the nervous system,and vascular smooth muscle cells.It plays a critical role in membrane excitability and electrical signal transduction,serving as an important target for studying T-cell function and providing a promising direction for developing therapeutics against autoimmune and inflammatory diseases.Therefore,the de-velopment of specific inhibitors of Kv1.3 channel has emerged as a novel therapeutic strategy for these disorders.In this study,we isolated and purified a novel Kv1.3-inhibitory peptide toxin,LmKTx13,from the venom of the scorpion Lychas mucronatus using reversed-phase high-performance liquid chroma-tography(RP-HPLC).LmKTx13 consists of 38 amino acid residues,including six cysteines that form three disulfide bonds.Whole-cell patch-clamp recordings revealed that LmKTx13 potently inhibited Kv1.3 with an IC50 of 7.92±3.0 nmol/L.Selectivity analysis showed that 2 μmol/L LmKTx13 also in-hibited Kv1.2 and Kv1.7,but exhibited no significant effects on other potassium channel subtypes or voltage-gated sodium channels.Further investigation into the mechanism demonstrated that LmKTx13 acts as a pore-blocking inhibitor of Kv1.3.By analyzing the effects of LmKTx13 on Kv1.3 channel gating ki-netics and performing sequence alignment of the pore regions of Kv1.3 and Kv1.5,we constructed site-directed mutants and identified the pore region of Kv1.3 as the critical binding site for LmKTx13.Key residues involved in the interaction included T425,G427,and H451.In summary,we discovered a no-vel pore-blocking Kv1.3 inhibitor,LmKTx13,from L.mucronatus venom,which exhibits high affinity and selectivity for Kv1.3.These findings highlight its potential as a potential lead molecule for developing Kv1.3-targeted therapeutics.

Aim To investigate the effects of the fangchinoline derivative LYY-32 on the biological prop-erties of the BLM642-1290 DNA helicase,in order to lay a foundation for further research on its antitumor activity.Methods Fluorescence polarization assay,malachite green-phosphate and ammonium molybdate colorime-try,and fluorescein-labeled DNA gel electrophoresis experiments were conducted to study the effects of fangchinoline derivative LYY-32 on the DNA binding activity,ATPase activity,and DNA unwinding activity of BLM642-1290 DNA helicase.The effects of LYY-32 on the DNA unwinding activity of DNA helicase in cells were studied using fluorescent techniques and time-lapse microscopy.Ultraviolet spectral scanning was used to investigate the effects of LYY-32 on the confor-mation of the BLM642-1290 DNA helicase.Results At a concentration of 10 μmol·L-1,the inhibition rate of LYY-32 on BLM642-1290 DNA helicase binding to dsDNA was 53.17％.At a concentration of 5 μmol·L-1,the inhibition rate of LYY-32 on BLM642-1290 DNA helicase binding to ssDNA was 88.49％.The inhibition rate of LYY-32 on the ATPase activity of BLM642-1290 DNA he-licase was 89.3％at a concentration of 50 μmol·L-1.When the concentration of LYY-32 exceeded 5μmol·L-1,its inhibition rate on the DNA unwinding activity of BLM642-1290 DNA helicase was 100％.LYY-32 also significantly inhibited the DNA unwinding ac-tivity of DNA helicase in cells.However,LYY-32 had no effect on the conformation of BLM642-1290 DNA heli-case.Conclusion The DNA binding activity,AT-Pase activity,and DNA unwinding activity of BLM642-1290 DNA helicase could be significantly inhibi-ted by the fangchinoline derivative LYY-32.

Polygonati Rhizoma demonstrates significant potential for addressing both chronic and hidden hunger. The supply of high-quality seedlings is a primary factor influencing the development of the Polygonati Rhizoma industry. Warm water soaking is often used in agriculture to promote the rapid germination of seeds, while its application and molecular mechanism in Polygonati Rhizoma have not been reported. To rapidly obtain high-quality seedlings, this study treated Polygonatum kingianum var. grandifolium seeds with sand storage at low temperatures, warm water soaking, and cultivation temperature gradients. The results showed that the culture at 25 ℃ or sand storage at 4 ℃ for 2 months rapidly broke the seed dormancy of P. kingianum var. grandifolium, while the culture at 20 ℃ or sand storage at 4 ℃ for 1 month failed to break the seed dormancy. Soaking seeds in 60 ℃ warm water further increased the germination rate, germination potential, and germination index. Specifically, the seeds soaked at 60 ℃ and cultured at 25 ℃ without sand storage treatment(Aa25) achieved a germination rate of 78. 67%±1. 53% on day 42 and 83. 40%±4. 63% on day 77. The seeds pretreated with sand storage at 4 ℃ for 2 months, soaked in 60 ℃ water, and then cultured at 25 ℃ achieved a germination rate comparable to that of Aa25 on day 77. Transcriptomic analysis indicated that warm water soaking might promote germination by triggering reactive oxygen species( ROS), inducing the expression of heat shock factors( HSFs) and heat shock proteins( HSPs), which accelerated DNA replication, transcript maturation, translation, and processing, thereby facilitating the accumulation and turnover of genetic materials. According to the results of indoor controlled experiments and field practices, maintaining a germination and seedling cultivation environment at approximately 25 ℃ was crucial for the one-year seedling cultivation of P. kingianum var. grandifolium.
Germination ; Seedlings/genetics* ; Water/metabolism* ; Seeds/metabolism* ; Polygonatum/genetics* ; Temperature ; Plant Proteins/genetics* ; Plant Dormancy