Objective To explore the role of Schlafen4(SLFN4)in acute pneumonia induced by hypervirulent Klebsiella pneumoniae(hvKp)via intratracheal aerosolization.Methods Differential expression gene Slfn4 was identified after infection with hvKp based on RNA sequencing(RNA-seq)and single-cell RNA sequencing(scRNA-seq)data before Slfn4-/-mice were obtained via CRISPR/Cas gene editing technology.Slfn4-/-mice and wild mice were challenged via intratracheal aerosolization.Mortality and weight changes were recorded for 14 d,while pathological changes and expression levels of interleukin-6(IL-6),IL-17A,IL-1β,and tumor necrosis factor-α(TNF-α)were detected at 48 h post-infection.Results SLFN4 expression was significantly increased in wild mice after infection with hvKp.Survival was significantly increased,and weight loss was mitigated before gradual recovery in Slfn4-/-mice after infection.The knockout of SLFN4 attenuated alveolar wall thickening,diminished neutrophil infiltration,and suppressed pro-inflammatory cytokine production(IL-6,IL-17A,IL-1β,TNF-α)in the lung at 48 h post-infection.Conclusion The deletion of SLFN4 may suppress the expression of specific pro-inflammatory cytokines and attenuate neutrophil over-recruitment in the lung,thereby alleviating pneumonia in mice after hvKp infection.

Purpose: The aim of this study was to investigate the feasibility of an intelligent handheld ultrasound (US) device for assisting non-expert general practitioners (GPs) in detecting carotid plaques (CPs) in community populations. Methods: This prospective parallel controlled trial recruited 111 consecutive community residents. All of them underwent examinations by non-expert GPs and specialist doctors using handheld US devices (setting A, setting B, and setting C). The results of setting C with specialist doctors were considered the gold standard. Carotid intima-media thickness (CIMT) and the features of CPs were measured and recorded. The diagnostic performance of GPs in distinguishing CPs was evaluated using a receiver operating characteristic curve. Inter-observer agreement was compared using the intragroup correlation coefficient (ICC). Questionnaires were completed to evaluate clinical benefits. Results: Among the 111 community residents, 80, 96, and 112 CPs were detected in settings A, B, and C, respectively. Setting B exhibited better diagnostic performance than setting A for detecting CPs (area under the curve, 0.856 vs. 0.749; P<0.01). Setting B had better consistency with setting C than setting A in CIMT measurement and the assessment of CPs (ICC, 0.731 to 0.923). Moreover, measurements in setting B required less time than the other two settings (44.59 seconds vs. 108.87 seconds vs. 126.13 seconds, both P<0.01). Conclusion Using an intelligent handheld US device, GPs can perform CP screening and achieve a diagnostic capability comparable to that of specialist doctors.

Purpose: The aim of this study was to investigate the feasibility of an intelligent handheld ultrasound (US) device for assisting non-expert general practitioners (GPs) in detecting carotid plaques (CPs) in community populations. Methods: This prospective parallel controlled trial recruited 111 consecutive community residents. All of them underwent examinations by non-expert GPs and specialist doctors using handheld US devices (setting A, setting B, and setting C). The results of setting C with specialist doctors were considered the gold standard. Carotid intima-media thickness (CIMT) and the features of CPs were measured and recorded. The diagnostic performance of GPs in distinguishing CPs was evaluated using a receiver operating characteristic curve. Inter-observer agreement was compared using the intragroup correlation coefficient (ICC). Questionnaires were completed to evaluate clinical benefits. Results: Among the 111 community residents, 80, 96, and 112 CPs were detected in settings A, B, and C, respectively. Setting B exhibited better diagnostic performance than setting A for detecting CPs (area under the curve, 0.856 vs. 0.749; P<0.01). Setting B had better consistency with setting C than setting A in CIMT measurement and the assessment of CPs (ICC, 0.731 to 0.923). Moreover, measurements in setting B required less time than the other two settings (44.59 seconds vs. 108.87 seconds vs. 126.13 seconds, both P<0.01). Conclusion Using an intelligent handheld US device, GPs can perform CP screening and achieve a diagnostic capability comparable to that of specialist doctors.

Objective To formulate the drug packaging material method standards in the 2025 edition of the Pharmacopoeia of the People's Republic of China(referred to as the"Chinese Pharmacopoeia"),to develop the method for the determination of extractable tungsten for prefilled syringes,and to interpret the content of the method to provide guidance and help for its subsequent implementation.Methods The formulation process of"Determination of Extractable Tungsten for Prefilled Syringes"was described.Combining the current domestic and foreign relevant standards,the extraction conditions of samples were explored and verified,and the determination methods of inductively coupled plasma optical emission spectrometer(ICP-OES)and inductively coupled plasma mass spectrometer(ICP-MS)were verified.Results A method was established for extracting tungsten from glass prefilled syringes utilizing water and 0.01 mol·L-1 sodium hydroxide solution as extraction media,respectively,at 75 ℃ through ultrasound.The dissolution amount of tungsten was determined by inductively coupled plasma opticalemission spectrometry(ICP-OES)and inductively coupled plasma mass spectrometry(ICP-MS).Among them,the extraction using 0.01 mol·L-1 sodium hydroxide solution as the extraction medium is a stricter and acceptable alternative approach.Conclusion According to the quality control requirements of products,corporations can choose the appropriate extraction medium according to the method in this standard for the determination of tungsten dissolution in the prefilled syringes.

Purpose To investigate the role of 18F-FDG PET/CT in predicting histological grade of invasive pulmonary adenocarcinoma in the WHO(2021)classification.Materials and Methods The Clinical,pathological and PET/CT data of 255 patients with invasive pulmonary adenocarcinoma confirmed by surgical pathology were retrospectively analyzed from May 2015 to August 2023.Tertiary tumor grading was performed according to the WHO(2021)classification.The clinicopathologic features,maximum standardized uptake value(SUVmax),maximum standardized uptake,total lesion glycolysis and CT imaging findings were compared among the three tumor grades.Logistic regression analysis was used to screen the independent predictors for grade 3 tumors,and performance evaluation was performed using receiver operating characteristic curve.Results Higher tumor grade was associated with male sex(χ2=11.803,P=0.003),smoking history(χ2=7.702,P=0.021),maximum tumor diameter(H=20.548,P=0.002),lymph node metastasis(P<0.001),vascular cancer thrombus(χ2=33.270,P<0.001),pleural invasion(χ2=15.116,P=0.001)and airway spread(χ2=17.867,P<0.001).SUVmax(H=71.488,P<0.001),total lesion glycolysis(H=30.658,P<0.001)and the proportion of pure solid tumors on CT image(χ2=28.872,P<0.001)all increased significantly with higher tumor grade.A higher SUVmax(OR=1.234,95%CI 1.141-1.334,P<0.001)and pure solid appearance(OR=2.205,95%CI 1.166-4.171,P=0.015)were independent predictors of grade 3 tumors.The area under the receiver operating characteristic curve for SUVmax,CT solid appearance and the combination for predicting grade 3 tumors was 0.793,0.641 and 0.804,respectively,with the SUVmax cut-off of 6.08.Conclusion SUVmax and CT solid appearance are independent predictive factors for grade 3 invasive pulmonary adenocarcinoma.Preoperative 18F-FDG PET/CT can assist in evaluating the grading of invasive pulmonary adenocarcinoma,which improves treatment decision-making.

Objective To explore the relationship between insulin resistance and idiopathic central precocious puberty(ICPP)in girls and the diagnostic value of insulin resistance.Methods Clinical data of 245 girls aged 4 to 7.5 years with low luteinizing hormone(LH)levels(0.2-0.83 IU/L),normal body weight(body mass index standard deviation score between-2 and+2),and early breast development who visited the Department of Pediatric Endocrinology,Henan Provincial Maternal and Child Health Hospital from January 2022 to March 2025 were retrospectively analyzed.According to the Expert Consensus on the Diagnosis and Treatment of Central Precocious Puberty(2022),patients were assigned to an ICPP group(n=123)or a control group(n=122).Correlations between the homeostasis model assessment of insulin resistance(HOMA-IR)and selected indices were assessed.Multivariable logistic regression was used to evaluate the association between HOMA-IR and ICPP,and the diagnostic performance of various indices for ICPP was evaluated.Results HOMA-IR was higher in the ICPP group than in the control group(P<0.001)and was positively correlated with LH peak(rs=0.467,P<0.05)and the LH peak/FSH peak ratio(rs=0.444,P<0.05).The multivariable logistic regression model including age,BMI,and basal LH showed that HOMA-IR was closely associated with ICPP(OR=2.756,95%CI:1.940-3.913).Receiver operating characteristic curve analysis showed that the areas under the curve for basal LH,HOMA-IR,and their combination in diagnosing ICPP were 0.735,0.735,and 0.805,respectively(P<0.05),and the combined model had a greater area under the curve than either basal LH or HOMA-IR alone(both P<0.05).Conclusions HOMA-IR is closely associated with ICPP in girls with low LH and normal body weight,and combining HOMA-IR with basal LH improves early identification and diagnostic efficiency in this population.

Fecal microbiota transplantation (FMT) has the potential to rebuild the intestinal microbiome of patients, which can influence the disease course, alleviate symptoms, or even cure the disease. It is seen as a promising breakthrough for treating major chronic diseases that are difficult to manage. Currently, FMT therapy has been clinically studied for over 80 diseases and has led to significant breakthroughs. However, there are still four main challenges: (1) identifying the effective characteristics of donor microbiota and ensuring precise matching between donors and recipients; (2) understanding the pathways and molecular mechanisms by which key FMT bacteria and metabolites improve disease outcomes; (3) studying strain interactions and colonization mechanisms to restore intestinal microbiota balance; and (4) refining the precision of microbiome and functional microbiota transplantation. To address these clinical challenges, this article reviews the latest research both domestically and internationally, outlines the response patterns of FMT therapy, examines the reasons behind FMT failure, and explores future directions for the development of FMT. The aim is to accelerate the scientific and precise advancement of FMT technology in China.

To elucidate the mechanism by which steaming affects the quality of Curcuma kwangsiensis root tubers, methods such as LSCM, RVA, dual-wavelength spectrophotometry, LF-NMR, and LC-MS were employed to qualitatively and quantitatively detect changes in starch gelatinization characteristics, water distribution, and material composition of C. kwangsiensis root tubers under different steaming durations. Based on multivariate statistical analysis, the correlation between differences in gelatinization parameters, water distribution, and terpenoid material composition was investigated. The results indicate that steaming affects both starch gelatinization and water distribution in C. kwangsiensis. During the steaming process, transformations occur between amylose and amylopectin, as well as between semi-bound water and free water. After 60 min of steaming, starch gelatinization and water distribution reached an equilibrium state. The content of amylopectin, the amylose-to-amylopectin ratio, and parameters such as gelatinization temperature, viscosity, breakdown value, and setback value were significantly correlated(P≤0.05). Additionally, the amylose-to-amylopectin ratio was significantly correlated with total free water and total water content(P≤0.05). Steaming induced differences in the material composition of C. kwangsiensis root tubers. Clustering of primary metabolites in the OPLS-DA model was distinct, while secondary metabolites were classified into 9 clusters using the K-means clustering algorithm. Differential terpenoid metabolites such as(-)-α-curcumene were significantly correlated with zerumbone, retinal, and all-trans-retinoic acid(P<0.05). Curcumenol was significantly correlated with isoalantolactone and ursolic acid(P<0.05), while all-trans-retinoic acid was significantly correlated with both zerumbone and retinal(P<0.05). Alpha-tocotrienol exhibited a significant correlation with retinal and all-trans-retinoic acid(P<0.05). Amylose was extremely significantly correlated with(-)-α-curcumene, curcumenol, zerumbone, retinal, all-trans-retinoic acid, and α-tocotrienol(P<0.05). Amylopectin was significantly correlated with zerumbone(P<0.05) and extremely significantly correlated with(-)-α-curcumene, curcumenol, zerumbone, retinal, all-trans-retinoic acid, and 9-cis-retinoic acid(P<0.01). The results provide scientific evidence for elucidating the mechanism of quality formation of steamed C. kwangsiensis root tubers as a medicinal material.
Curcuma/chemistry* ; Starch/chemistry* ; Multivariate Analysis ; Water/chemistry* ; Terpenes/analysis* ; Plant Roots/chemistry* ; Plant Tubers/chemistry* ; Drugs, Chinese Herbal/chemistry*

Hongsheng Dan, historically referred to as the "surgical sacred medicine", is at risk of losing its refining technology in contemporary times. This study aimed to preserve and innovate this traditional non-heritage refining technology. By utilizing the analytic hierarchy process(AHP) combined with the entropy weight method, this study established the hierarchical structure model of refining process of Hongsheng Dan and conducted a single factor experiment and an L_9(3~4) orthogonal experiment to optimize the refining method of Hongsheng Dan. Additionally, the study employed infrared thermal imaging to monitor temperature variations of Hongsheng Dan during the refining process. The optimized refining parameters for Hongsheng Dan were established as follows: a slow fire temperature of 175 ℃ with a duration of 30 minutes, a strong fire temperature of 270 ℃ with a duration of 60 minutes, and a tail fire temperature of 180 ℃ with a duration of 15 minutes. The stability and feasibility of this optimized process were confirmed through validation tests. The research focused on the material transformation of Hongsheng Dan, starting from the material changes during the refining process of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid. The study investigated elemental transformations, physical phase changes, and alterations in thermal properties. 78.98% of the mercury in Hongsheng Dan and 80.21% of the mercury in mercuric oxide from nitric acid were retained. The diffraction peak intensity of the(011) crystal plane of Hongsheng Dan was highest at approximately 30.07°, indicating that the(011) crystal plane had a preferred crystalline orientation. Furthermore, the temperature range for the alteration in thermal properties during the refining process of Hongsheng Dan was found to be between 80 ℃ and 130 ℃. This research not only optimized the refining technology of Hongsheng Dan but also pioneered the application of infrared thermal imaging to study temperature changes throughout the refining process. By exploring the material transformation patterns of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid, the study provided technical support for the preservation and innovation of Hongsheng Dan.
Drugs, Chinese Herbal/standards* ; Temperature

The three-dimensional (3D) printed bone tissue repair guide scaffold is considered a promising method for treating bone defect repair. In this experiment, chitosan (CS), sodium alginate (SA), and mineralized collagen (MC) were combined and 3D printed to form scaffolds. The experimental results showed that the printability of the scaffold was improved with the increase of chitosan concentration. Infrared spectroscopy analysis confirmed that the scaffold formed a cross-linked network through electrostatic interaction between chitosan and sodium alginate under acidic conditions, and X-ray diffraction results showed the presence of characteristic peaks of hydroxyapatite, indicating the incorporation of mineralized collagen into the scaffold system. In the in vitro collagen release experiments, a weakly alkaline environment was found to accelerate the release rate of collagen, and the release amount increased significantly with a lower concentration of chitosan. Cell experiments showed that scaffolds loaded with mineralized collagen could significantly promote cell proliferation activity and alkaline phosphatase expression. The subcutaneous implantation experiment further verified the biocompatibility of the material, and the implantation of printed scaffolds did not cause significant inflammatory reactions. Histological analysis showed no abnormal pathological changes in the surrounding tissues. Therefore, incorporating mineralized collagen into sodium alginate/chitosan scaffolds is believed to be a new tissue engineering and regeneration strategy for achieving enhanced osteogenic differentiation through the slow release of collagen.
Chitosan/chemistry* ; Alginates/chemistry* ; Tissue Scaffolds/chemistry* ; Printing, Three-Dimensional ; Osteogenesis ; Collagen/chemistry* ; Cell Differentiation ; Animals ; Tissue Engineering/methods* ; Cell Proliferation ; Biocompatible Materials ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry*